974 resultados para Limited Sampling Strategy


Relevância:

30.00% 30.00%

Publicador:

Resumo:

This is a reply to Ortega-Baes` et al. (2010) survey of 25 Argentinean species of cacti evaluated for vivipary. We argue that the sample size and geographic area of the species investigated is insufficient to totally exclude the putative commonness of this condition in the Cactaceae. We indicate possible reasons why they did not find viviparous fruits in their survey. Failure to detect vivipary in cacti of NW Argentina may be correlated with limited taxonomic sampling and geographic region in addition to intrinsic and extrinsic plant factors, including different stages of fruit and seed development and genetic, ecological, and edaphic aspects, which, individually or in concert, control precocious germination. We uphold that viviparity is putatively frequent in this family and list 16 new cases for a total of 53 viviparous cacti, which make up ca. 4% incidence of viviparism in the Cactaceae, a substantially higher percentage than most angiosperm families exhibiting this condition. The Cactaceae ranks fourth in frequency of viviparity after the aquatic families of mangroves and seagrasses. We suggest the re-evaluation of cactus vivipary, primarily as a reproductive adaptation to changing environments and physiological stress with a secondary role as a reproductive strategy with limited offspring dispersal/survival and fitness advantages. (C) 2011 Elsevier Ltd. All rights reserved.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In situ fusion on the boat-type graphite platform has been used as a sample pretreatment for the direct determination of Co, Cr and Mn in Portland cement by solid sampling graphite furnace atomic absorption spectrometry (SS-GF AAS). The 3-field Zeeman technique was adopted for background correction to decrease the sensitivity during measurements. This strategy allowed working with up to 200 mu g of sample. The in situ fusion was accomplished using 10 mu L of a flux mixture 4.0% m/v Na(2)CO(3) + 4.0% m/v ZnO + 0.1% m/v Triton (R) X-100 added over the cement sample and heated at 800 degrees C for 20 s. The resulting mould was completely dissolved with 10 mu L of 0.1% m/v HNO(3). Limits of detection were 0.11 mu g g(-1) for Co, 1.1 mu g g(-1) for Cr and 1.9 mu g g(-1) for Mn. The accuracy of the proposed method has been evaluated by the analysis of certified reference materials. The values found presented no statistically significant differences compared to the certified values (Student`s t-test, p<0.05). In general, the relative standard deviation was lower than 12% (n = 5). (C) 2009 Elsevier B.V. All rights reserved.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

A fast and reliable method for the direct determination of iron in sand by solid sampling graphite furnace atomic absorption spectrometry was developed. A Zeeman-effect 3-field background corrector was used to decrease the sensitivity of spectrometer measurements. This strategy allowed working with up to 200 mu g of samples, thus improving the representativity. Using samples with small particle sizes (1-50 mu m) and adding 5 mu g Pd as chemical modifier, it was possible to obtain suitable calibration curves with aqueous reference solutions. The pyrolysis and atomization temperatures for the optimized heating program were 1400 and 2500 degrees C, respectively. The characteristic mass, based on integrated absorbance, was 56 pg, and the detection limits, calculated considering the variability of 20 consecutive measurements of platform inserted without sample was 32 pg. The accuracy of the procedure was checked with the analysis of two reference materials (IPT 62 and 63). The determined concentrations were in agreement with the recommended values (95% confidence level). Five sand samples were analyzed, and a good agreement (95% confidence level) was observed using the proposed method and conventional flame atomic absorption spectrometry. The relative standard deviations were lower than 25% (n = 5). The tube and boat platform lifetimes were around 1000 and 250 heating cycles, respectively.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

We discuss the development and performance of a low-power sensor node (hardware, software and algorithms) that autonomously controls the sampling interval of a suite of sensors based on local state estimates and future predictions of water flow. The problem is motivated by the need to accurately reconstruct abrupt state changes in urban watersheds and stormwater systems. Presently, the detection of these events is limited by the temporal resolution of sensor data. It is often infeasible, however, to increase measurement frequency due to energy and sampling constraints. This is particularly true for real-time water quality measurements, where sampling frequency is limited by reagent availability, sensor power consumption, and, in the case of automated samplers, the number of available sample containers. These constraints pose a significant barrier to the ubiquitous and cost effective instrumentation of large hydraulic and hydrologic systems. Each of our sensor nodes is equipped with a low-power microcontroller and a wireless module to take advantage of urban cellular coverage. The node persistently updates a local, embedded model of flow conditions while IP-connectivity permits each node to continually query public weather servers for hourly precipitation forecasts. The sampling frequency is then adjusted to increase the likelihood of capturing abrupt changes in a sensor signal, such as the rise in the hydrograph – an event that is often difficult to capture through traditional sampling techniques. Our architecture forms an embedded processing chain, leveraging local computational resources to assess uncertainty by analyzing data as it is collected. A network is presently being deployed in an urban watershed in Michigan and initial results indicate that the system accurately reconstructs signals of interest while significantly reducing energy consumption and the use of sampling resources. We also expand our analysis by discussing the role of this approach for the efficient real-time measurement of stormwater systems.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Most of water distribution systems (WDS) need rehabilitation due to aging infrastructure leading to decreasing capacity, increasing leakage and consequently low performance of the WDS. However an appropriate strategy including location and time of pipeline rehabilitation in a WDS with respect to a limited budget is the main challenge which has been addressed frequently by researchers and practitioners. On the other hand, selection of appropriate rehabilitation technique and material types is another main issue which has yet to address properly. The latter can affect the environmental impacts of a rehabilitation strategy meeting the challenges of global warming mitigation and consequent climate change. This paper presents a multi-objective optimization model for rehabilitation strategy in WDS addressing the abovementioned criteria mainly focused on greenhouse gas (GHG) emissions either directly from fossil fuel and electricity or indirectly from embodied energy of materials. Thus, the objective functions are to minimise: (1) the total cost of rehabilitation including capital and operational costs; (2) the leakage amount; (3) GHG emissions. The Pareto optimal front containing optimal solutions is determined using Non-dominated Sorting Genetic Algorithm NSGA-II. Decision variables in this optimisation problem are classified into a number of groups as: (1) percentage proportion of each rehabilitation technique each year; (2) material types of new pipeline for rehabilitation each year. Rehabilitation techniques used here includes replacement, rehabilitation and lining, cleaning, pipe duplication. The developed model is demonstrated through its application to a Mahalat WDS located in central part of Iran. The rehabilitation strategy is analysed for a 40 year planning horizon. A number of conventional techniques for selecting pipes for rehabilitation are analysed in this study. The results show that the optimal rehabilitation strategy considering GHG emissions is able to successfully save the total expenses, efficiently decrease the leakage amount from the WDS whilst meeting environmental criteria.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Purpose - The purpose of this paper is to identify factors that can help managers to overcome barriers to alignment of operations strategy at the interface with marketing. Design/methodology/approach - This objective required the application of a procedure based on strategic consensus and a deeper analysis, such that the delimitation of the study in a single case was mandatory. The strategic processes of interfacing involve managerial attributes that are subject to the influence of human aspects and, therefore, the research method used a qualitative approach. The protocol design included the following data sources: interviews, document reviews and researcher observations. The categorisation was made based on the theoretical references, the frequency of observations, common responses and information from documents. Findings - The balance between intra-functional trade-offs, joint research on the competitive context, reflections on the understanding of customer needs and operational performance, and understanding of inter-functional trade-offs were the main factors verified. They effectively support decisions associated with interface processes and promotes the integration of these processes. They can generate inputs that enable managers to achieve an appropriate balance among alternatives in light of various trade-offs. Practical implications - These factors make possible new connections between strategic processes in the context of operations and marketing functions. The formations of these strategies are aligned through a better understanding of both threats and opportunities by means of a joint analysis of the competitive context. The presented findings can be used to develop a clear definition of strategic objectives of operations and a more appropriate treatment of market needs. Originality/value - The findings from the research can be considered as new elements for promoting alignment in the formation process of the operations strategy. Little research to date has examined the operations-marketing strategic interface of companies in the context of strategic consensus. © Emerald Group Publishing Limited.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In soil surveys, several sampling systems can be used to define the most representative sites for sample collection and description of soil profiles. In recent years, the conditioned Latin hypercube sampling system has gained prominence for soil surveys. In Brazil, most of the soil maps are at small scales and in paper format, which hinders their refinement. The objectives of this work include: (i) to compare two sampling systems by conditioned Latin hypercube to map soil classes and soil properties; (II) to retrieve information from a detailed scale soil map of a pilot watershed for its refinement, comparing two data mining tools, and validation of the new soil map; and (III) to create and validate a soil map of a much larger and similar area from the extrapolation of information extracted from the existing soil map. Two sampling systems were created by conditioned Latin hypercube and by the cost-constrained conditioned Latin hypercube. At each prospection place, soil classification and measurement of the A horizon thickness were performed. Maps were generated and validated for each sampling system, comparing the efficiency of these methods. The conditioned Latin hypercube captured greater variability of soils and properties than the cost-constrained conditioned Latin hypercube, despite the former provided greater difficulty in field work. The conditioned Latin hypercube can capture greater soil variability and the cost-constrained conditioned Latin hypercube presents great potential for use in soil surveys, especially in areas of difficult access. From an existing detailed scale soil map of a pilot watershed, topographical information for each soil class was extracted from a Digital Elevation Model and its derivatives, by two data mining tools. Maps were generated using each tool. The more accurate of these tools was used for extrapolation of soil information for a much larger and similar area and the generated map was validated. It was possible to retrieve the existing soil map information and apply it on a larger area containing similar soil forming factors, at much low financial cost. The KnowledgeMiner tool for data mining, and ArcSIE, used to create the soil map, presented better results and enabled the use of existing soil map to extract soil information and its application in similar larger areas at reduced costs, which is especially important in development countries with limited financial resources for such activities, such as Brazil.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Soil CO2 efflux is the primary source of CO2 emissions from terrestrial ecosystems to the atmosphere. The rates of this flux vary in time and space producing hot moments (sudden temporal high fluxes) and hot spots (spatially defined high fluxes), but these high reaction rates are rarely studied in conjunction with each other. We studied temporal and spatial variation of soil CO2 efflux in a water-limited Mediterranean ecosystem in Baja California, Mexico. Soil CO2 efflux increased 522% during a hot moment after rewetting of soils following dry summer months. Monthly precipitation was the primary driver of the seasonal trend of soil CO2 efflux (including the hot moment) and through changes in soil volumetric water content (VWC) it influenced the relationship between CO2 efflux and soil temperature. Geostatistical analyses showed that the spatial dependence of soil CO2 efflux changed between two contrasting seasons (dry and wet). During the dry season high soil VWC was associated with high soil CO2 efflux, and during the wet season the emergence of a hot spot of soil CO2 efflux was associated with higher root biomass and leaf area index. These results suggest that sampling designs should accommodate for changes in spatial dependence of measured variables. The spatio-temporal relationships identified in this study are arguably different from temperate ecosystems where the majority of soil CO2 efflux research has been done. This study provides evidence of the complexity of the mechanisms controlling the spatio-temporal variability of soil CO2 efflux in water-limited ecosystems. (C) 2014 Elsevier Ltd. All rights reserved.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Surveillance and control activities related to bovine tuberculosis (TB) in free-ranging, Michigan white-tailed deer (Odocoileus virginianus) have been underway for over a decade, with significant progress. However, foci of higher TB prevalence on private lands and limited agency ability to eliminate them using broad control strategies have led to development and trial of new control strategies, such as live trapping, testing, and culling or release. Such strategies require a prompt, accurate live animal test, which has thus far been lacking. We report here the ability of seven candidate blood assays to determine the TB infection status of Michigan deer. Our aims were twofold: to characterize the accuracy of the tests using field-collected samples and to evaluate the feasibility of the tests for use in a test-and-cull strategy. Samples were collected from 760 deer obtained via five different surveys conducted between 2004 and 2007. Blood samples were subjected to one or more of the candidate blood assays and evaluated against the results of mycobacterial culture of the cranial lymph nodes. Sensitivities of the tests ranged from 46% to 68%, whereas specificities and negative predictive values were all .92%. Positive predictive values were highly variable. An exploratory analysis of associations among several host and sampling-related factors and the agreement between blood assay and culture results suggested these assays were minimally affected. This study demonstrated the capabilities and limitations of several available blood tests for Mycobacterium bovis on specimens obtained through a variety of field surveillance methods. Although these blood assays cannot replace mass culling, information on their performance may prove useful as wildlife disease managers develop innovative methods of detecting infected animals where mass culling is publicly unacceptable and cannot be used as a control strategy.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Objective. Evaluate feasibility and safety of a novel technique for uterine morcellation in patients scheduled for laparoscopic treatment of gynecologic malignances. Background. The laparoscopic management of uterine malignancies is progressively gaining importance and popularity over laparotomy. Nevertheless, minimal invasive surgery is of limited use when patients have enlarged uterus or narrow vagina. In these cases, conventional uterus morcellation could be a solution but should not be recommended due to risks of tumor dissemination. Methods. Prospective pilot study of women with endometrial cancer in which uterus removal was a realistic concern due to both organ size and proportionality. Brief technique description: after completion of total laparoscopic hysterectomy and bilateral anexectomy, a nylon with polyurethane Lapsac (R) is vaginally inserted into the abdomen; the specimen is placed inside the pouch that will be closed and rotated 180 degrees toward the vaginal vault and, posteriorly, pushed into the vaginal canal; in the transvaginal phase, the surgeon pulls the edges of the bag up to vaginal introitus and all vaginal walls will be covered; inside the pouch, the operator performs a uterus bisection-morcellation. Results. In our series of 8 cases, we achieved successful completion in all patients, without conversion to laparotomy. Average operative time, blood loss and length of hospitalization were favorable. One patient presented with a vesicovaginal fistula. Conclusion. The vaginal morcellation following oncologic principles is a feasible method that permits a rapid uterine extraction and may avoid a number of unnecessary laparotomies. Further studies are needed to confirm the oncological safety of the technique. (C) 2012 Elsevier Inc. All rights reserved.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

We consider a seller who owns two capacity-constrained resources and markets two products (components) corresponding to these resources as well as a bundle comprising the two components. In an environment where all customers agree that one of the two components is of higher quality than the other and that the bundle is of the highest quality, we derive the seller's optimal bundling strategy. We demonstrate that the optimal solution depends on the absolute and relative availabilities of the two resources as well as upon the extent of subadditivity of the quality of the products. The possible strategies that can arise as equilibrium behavior include a pure components strategy, a partial- or full-spectrum mixed bundling strategy, and a pure bundling strategy, where the latter strategy is optimal when capacities are unconstrained. These conclusions are contrary to findings in the prior literature on bundling that demonstrated the unambiguous dominance of the full-spectrum mixed bundling strategy. Thus, our work expands the frontier of bundling to an environment with vertically differentiated components and limited resources. We also explore how the bundling strategies change as we introduce an element of horizontal differentiation wherein different types of customers value the available components differently.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

BACKGROUND: 90% of newborns infected perinatally will develop chronic hepatitis B infection with the risk of liver cirrhosis or hepatocellular carcinoma. In Switzerland, screening of all pregnant women for hepatitis B virus (HBV) has been recommended since 1983. Neonates at risk for perinatally acquired HBV are passively and actively immunised immediately after birth as well as at 1 and 6 months of age. The objective of this study was to evaluate the proportion of newborns immunised in accordance with the proposed vaccination schedule. METHODS: Patient records of 3997 mothers who gave birth to a liveborn infant during a two-year period at Zürich University Hospital were screened by computer. 128 women were identified as HBsAg positive or anti-HBc alone positive. Of 133 infants born to these mothers, complete data were available for 94 (71%). RESULTS: Immunisation was started in 88 infants (94%), but only in 78 (83%) within the first 24 hours of life. 85 (90%) received the 2nd immunisation but only 72 (77%) within the given time limit. 80 (85%) of the infants received the 3rd immunisation but only 69 (73%) within the correct time limit. In summary, only 51 (54%) of the infants at risk for HBV infection were immunised correctly (immunoglobulin within 24 hours and active prophylaxis at 0, 1 and 6 months). CONCLUSIONS: The success of the immunisation strategy following maternal screening and selective immunisation of newborns at risk for HBV infection is limited for various reasons (lack of screening results at birth, problems with correct documentation and communication). To overcome these drawbacks, selective vaccination strategy should be improved and general vaccination strategy, including infants, should be reconsidered.