867 resultados para Life Stress
Resumo:
There is evidence that oxidative stress plays a role in the development of chronic lung disease (CLD), with immature lungs being particularly sensitive to the injurious effect of oxygen and mechanical ventilation. We analyzed total ascorbate, urate, and protein carbonyls in 102 bronchoalveolar lavage fluid samples from 38 babies (33 preterm, 24–36 wk gestation; 5 term, 37–39 wk gestation). Preterm babies had significantly decreasing concentrations of ascorbate, urate, and protein carbonyls during the first 9 days of life (days 1–3, 4–6, and 7–9, Kruskal-Wallis ANOVA: P 5 0.016, P , 0.0001, and P 5 0.010, respectively). Preterm babies had significantly higher protein carbonyl concentrations at days 1–3 and 4–6 (P 5 0.005 and P 5 0.044) compared with term babies. Very preterm babies (24–28 wk gestation) had increased concentrations of protein carbonyls at days 4–6 (P 5 0.056) and significantly decreased ascorbate concentrations at days 4–6 (P 5 0.004) compared with preterm babies (29–36 wk gestation). Urate concentrations were significantly elevated at days 1–3 (P 5 0.023) in preterm babies who subsequently developed CLD. This study has shown the presence of oxidative stress in the lungs of preterm babies during ventilation, especially in those who subsequently developed CLD.
Resumo:
Adults’ perceptions of stressful life events have been acknowledged as important moderators of the stress adjustment relationship. Until recently, however, there has been a lack of research on children's perceptions of negative life events. This study assesses children's own perceptions of the stressfulness of negative familial, academic and social events as well as events related to the political conflict in Northern Ireland. Method: Developmental changes in children's perceptions of events are traced over time. One hundred and sixty 8-year-old children completed a self-report measure of the perceived stressfulness of a range of negative life events. The sample was drawn from schools in the Greater Belfast area to include children of both genders, primary religious affiliations in Northern Ireland (i.e., Protestant and Roman Catholic) and of varying socio-economic status. Three years later, 113 of these children, then aged 11, were traced through the school system and completed the same measure. Results: Children's perceptions of stressful events are related to a host of social factors. Girls viewed many negative events as more stressful than their male counterparts. Roman Catholic and Protestant children differed in their perceptions of conflict-related events. Perceptions of various types of negative experiences were differentially related to socio-economic status and age. Conclusion: Personal, social and situational factors differentially determine children's perceptions of negative life experiences.
Resumo:
OBJECTIVES: The differences between child self-reports and parent proxy reports of quality of life in a large population of children with cerebral palsy were studied. We examined whether child characteristics, severity of impairment, socioeconomic factors, and parental stress were associated with parent proxy reports being respectively higher or lower than child self-reports of quality of life. METHODS. This study was conducted in 2004–2005 and assessed child quality of life (using the Kidscreen questionnaire, 10 domains, each scored 0–100) through self-reports and parent proxy reports of 500 children aged 8 to 12 years who had cerebral palsy and were living in 7 countries in Europe. RESULTS: The mean child-reported scores of quality of life were significantly higher than the parent proxy reports in 8 domains, significantly lower for the finances domain, and similar for the emotions domain. The average frequency of disagreement (child-parent difference greater than half an SD of child scores) over all domains was 64%, with parents rating their child’s quality of life lower than the children themselves in 29% to 57% of child-parent pairs. We found that high levels of stress in parenting negatively influenced parents’ perception of their child’s quality of life, whereas the main factor explaining parents’ ratings of children’s quality of life higher than the children themselves is self-reported severe child pain. CONCLUSIONS: This study shows that the factors associated with disagreement are different according to the direction of disagreement. In particular, parental wellbeing and child pain should be taken into account in the interpretation of parent proxy reports, especially when no child self-report of quality of life is available. In the latter cases, it may be advisable to obtain additional proxy reports (from caregivers, teachers, or clinicians) to obtain complementary information on the child’s quality of life.
Resumo:
OBJECTIVE. The goal was to determine whether the type and severity of the child's impairments and the family's psychosocial, social, and economic characteristics influence parent-reported child quality of life across the spectrum of severity of cerebral palsy.
METHODS. Our population-based, cross-sectional survey conducted in 2004 to 2005 involved 818 children with cerebral palsy, 8 to 12 years of age, from 7 countries (9 regions) in Europe. Child quality of life was assessed through parent reports by using the Kidscreen questionnaire, and data were analyzed separately for each of its 10 domains.
RESULTS. The parental response rates were >93% for all domains except one. Gross motor function and IQ level were found to be associated independently with quality of life in most domains. However, greater severity of impairment was not always associated with poorer quality of life; in the moods and emotions, self-perception, social acceptance, and school environment domains, less severely impaired children were more likely to have poor quality of life. Pain was associated with poor quality of life in the physical and psychological well-being and self-perception domains. Parents with higher levels of stress were more likely to report poor quality of life in all domains, which suggests that factors other than the severity of the child's impairment may influence the way in which parents report quality of life.
CONCLUSIONS. The parent-reported quality of life for children with cerebral palsy is associated strongly with impairment. However, depending on the areas of life, the most severely impaired children (in terms of motor functioning or intellectual ability) do not always have the poorest quality of life.
Resumo:
Adopting and adapting musicology’s use of affect theories, specifically Jeremy Gilbert’s idea of an ‘affective analysis’ and David Epstein’s idea of ‘shaping affect’, this article looks at Martin Crimp’s Attempts on Her Life from a practitioner’s perspective. It investigates the challenges and benefits of adopting an ‘affective approach’ to directing recent theatre texts which stress the musicality and corporeality of language along with, and at times above, their signifying roles. Rather than locating Aristotelian dramatic climaxes based on narratological or characterological progression, an affective approach seeks to identify moments of affective intensity, which produce a different sort of impact by working on a ‘body-first’ methodology rather than the directly cerebral. That this embodied impact is not ultimately meaningless is one of affect theories most vital assertions. This approach has resonance in terms of how directors, performers and critics/theorists approach work of this type.
Resumo:
The aims of the study are to describe participation of children with cerebral palsy in everyday life situations, to investigate the relationship between participation (primary outcome variable) with child and parent characteristics (independent variables) and to compare the frequency of participation (secondary outcome variable) of children with cerebral palsy with children without disabilities. A cross-sectional survey of parents of children with cerebral palsy in Northern Ireland was undertaken in families’ homes using standard questionnaires. Children with cerebral palsy born between 31/8/1991 and 1/4/1997 were identified from a case register of people with the condition. A total of 102 parents opted in (51% response rate). Questionnaires included the Life Habits Questionnaire (Life-H) to measure difficulties in participation and The Frequency of Participation Questionnaire (FPQ), to measure frequency of participation with comparative data for children without disability. Overall, children with cerebral palsy participated less often than their non-disabled peers across a number of lifestyle and cultural pursuits. Among the 102 children with cerebral palsy, participation in ‘relationships’ was the least disrupted area of everyday life and aspects of ‘school’, ‘personal care’ and ‘mobility’ were the most disrupted. Children with cerebral palsy and severe co-impairments were significantly less likely to experience higher levels of participation in most areas of everyday life when compared to children with cerebral palsy and no severe co-impairments. Child physical and psychological well-being did not influence participation although higher parenting stress was significantly related to lower child participation in ‘community activities’. Participation is an important health outcome for children with cerebral palsy and should be incorporated in routine clinical practice. Professionals have a role to play both at the level of addressing individual child and family needs as well as influencing legislation and policy to ensure improved access to services and local communities.
Resumo:
Objective: The proportion of overweight and obese people has grown rapidly, and obesity has now been widely recognized as an important public health problem. At the came time, stress has increased in working life. The 2 problems could be connected if work stress promotes unhealthy eating habits and sedentary behavior and thereby contributes to weight gain. This study explored the association between work stress and body mass index (BMI; kg/m(2)). Methods: We used cross-sectional questionnaire data obtained from 45,810 female and male employees participating in the ongoing Finnish Public Sector Cohort Study. We constructed individual-level scores, as well as occupational- and organizational-level aggregated scores for work stress, as indicated by the demand/control model and the effort-reward imbalance model. Linear regression analyses were stratified by sex and socioeconomic status (SES) and adjusted for age, marital status, job contract, smoking, alcohol consumption, physical activity, and negative affectivity. Results: The results with the aggregated scores showed that lower job control, higher job strain, and higher effort-reward imbalance were associated with a higher BMI. In men, lower job demands were also associated with a higher BMI. These associations were not accounted for by SES, although an additional adjustment for SES attenuated the associations. The results obtained with the individual-level scores were in the same direction, but the relationships were weaker than those obtained with the aggregated scores. Conclusions: This study shows a weak association between work stress and BMI.
Resumo:
The objective of this research was to determine the surface temperature of a high pressure die casting die during casting conditions. This was achieved by instrumentation of an insert which was placed in the shotplate region of the die. This research overcame the challenge of directly measuring the die surface temperature during a HPDC production casting cycle and shows that this is an effective method to determine the die surface temperature during the casting cycle. The instrumentation results gave a peak and minimum temperature of 500 C and 240 C respectively during steady state running conditions with a molten aluminium casting temperature of 660 C. Stress analysis from the steady state measured temperature of the die surface was calculated through a simple FEA model and the resulting stress uctuation was applied to a fatigue equation for the die material, the predicted number of cycles for cracking to start was found to correlate well with observed die damage.
Resumo:
Background: Pregnancy is viewed as a major life event and, while the majority of healthy, low-risk women adapt well to pregnancy, there are those whose levels of stress are heightened by the experience.
Objectives: To determine the level of pregnancy-related stress experienced by a group of healthy, low-risk pregnant women and to relate the level of stress with a number of maternal characteristics.
Design: An observational cross-sectional study.
Setting: A large, urban maternity centre in Northern Ireland.
Participants: Of the 306 pregnant women who were invited to participate, 278 provided informed consent and were administered one self-complete questionnaire. Due to the withdrawal criteria, 15 questionnaires were removed from the analysis, resulting in a final sample of 263 healthy, low-risk pregnant women.
Methods: Levels of stress were measured using a self-report measure designed to assess specific worries and concerns relating to pregnancy. Maternal characteristics collected included age, marital status, social status, parity, obstetric history, perceived health status and 'wantedness' for the pregnancy. Regression analysis was undertaken using an ordinary linear regression model.
Results: The mean prenatal distress score in the sample was 15.1 (SD = 7.4; range 0-46). The regression model showed that women who had had previous pregnancies, with or without complications, had significantly lower mean prenatal distress scores than primiparous women (p < 0.01). Women reporting poorer physical health had higher mean prenatal distress scores than those who reported at least average health, while women aged 16-20 experienced a mean increase in the reported prenatal distress score (p < 0.05) in comparison to the reference group of 36 years and over.
Conclusions: This study brings to light the prevalence of pregnancy-related stress within a sample representative of healthy, low-risk women. Current antenatal care is ill-equipped to identify women suffering from high levels of stress; yet a growing body of research evidence links stress with adverse pregnancy outcomes. This study emphasises that healthy, low-risk women experience a range of pregnancy-related stress and identification of stress levels, either through the use of a simple stress measurement tool or through the associated factors identified within this research study, provides valuable data on maternal well-being. (C) 2010 Elsevier Ltd. All rights reserved.
Resumo:
At risk of poverty indicators based on relative income measures suggest that within the enlarged EU societies located at quite different points on a continuum of affluence have similar levels of poverty. Substantial differences in levels of income between societies do not in themselves invalidate this approach. However, the relative income approach fails to capture the fact that, if countries are grouped in terms of level of GDP, between economic cluster differences in life-style deprivation are sharper at lower income levels. Support for the argument relating to restricted reference groups is found in relation to the contrast between the twelve most affluent EU countries and all others. The limitations of relative income poverty lines have little to do with the process of enlargement as such. Instead the major problem involves the weak association between income and deprivation in the more affluent countries. However, as a consequence of such difficulties, such indicators do not provide entirely meaningful comparisons of levels of disadvantage across economic clusters. The current analysis, rather than supporting the alternative of a focus on absolute income or an EU wide poverty line, suggests that we should take the argument for adopting a multidimensional approach to the measurement of poverty more seriously.
Resumo:
The aim was to explore the predictive ability of sources of stress and a range of dispositional and coping behaviours on student satisfaction and motivation. Most research exploring sources of stress and coping in students construes stress as psychological distress, with little attempt to consider positive experiences of stress. A questionnaire was administered to 120 first-year UK psychology students. Questions were asked which measured sources of stress when rated as likely to contribute to distress (a hassle) and likely to help one achieve (an uplift). The sources of stress were amended from the UK National Student Survey (NSS, 2011). Support, control, self-efficacy, personality and coping style were also measured, along with their potential affect on
course satisfaction, motivation and feeling part of a learning community. The sources of stress likely to lead to distress were more often significant than sources of stress likely to lead to positive, eustress states. Ironically,
factors one would consider would help students, such as the university support facilities, only did so when rated as a hassle, not as an uplift. Published university league tables draw heavily on student course satisfaction but this negatively correlated with intellectual motivation and feeling part of a learning
community. This suggests course satisfaction alone reveals an incomplete picture of the student experience. Course educators need to consider how course experiences contribute not just to potential distress but to
potential eustress. Teaching quality, effective support and work-life balance are key to student satisfaction and motivation. How educators interact with their students and the opportunities they create in and outside the class to promote peer support are likely to enhance satisfaction and motivation.
Resumo:
Fiber-reinforced polymer (FRP) hollow tubes are used in structural applications, such as utility poles and pipelines. Concrete-filled FRP tubes (CFFTs) are also used as piles and bridge piers. Applications such as poles and marine piles are typically governed by cyclic bending. In this paper, the fatigue behavior of glass-FRP filament-wound tubes is studied using coupons cut from the tubes. Several coupon configurations were first examined in 24 tension and five compression monotonic loading tests. Fatigue tests were then conducted on 81 coupons to examine several parameters; namely, loading frequency as well as maximum-to-ultimate (max ult) and minimum-to-maximum (min max) stress ratios, including tension tension and tension compression, to simulate reversed bending. The study demonstrated the sensitivity of test results and failure mode to coupon configuration. The presence of compression loads reduced fatigue life, while increasing load frequency increased fatigue life. Stiffness degradation behavior was also established. To achieve at least one million cycles, it is recommended to limit (max ult) to 0.25. Models were used to simulate stiffness degradation and fatigue life curve of the tube. Fatigue life predictions of large CFFT beams showed good correlation with experimental results. © 2008 ASCE.
Resumo:
Knowledge on the life span of the riveting dies used in the automotive industry is sparse. It is often the case that only when faulty products are produced are workers aware that their tool needs to be changed. This is of course costly both in terms of time and money. Responding to this challenge, this paper proposes a methodology which integrates wear and stress analysis to quantify the life of a riveting die. Experiments are carried out to measure the applied load required to split a rivet. The obtained results (i.e. force curves) are used to validate the wear mechanisms of the die observed using scanning electron microscopy. Sliding, impact, and adhesive wears are observed on the riveting die after a certain number of riveting cycles. The stress distribution on the die during riveting is simulated using a finite element (FE) approach. In order to confirm the accuracy of the FE model, the experimental force results are compared with the ones produced from FE simulation. The maximum and minimum von Mises' stresses generated from the FE model are input into a Goodman diagram and an S-N curve to compute the life of the riveting die. It is found that the riveting die is predicted to run for 4 980 000 cycles before failure.
Resumo:
Since 2008, Ireland has experienced the most severe economic and labour market crisis since the foundation of the State. These economic and labour market changes have had a stark impact on the standard of living across the Irish population. The rapid deterioration in the labour market, the rising level of household indebtedness and stringent austerity measures to plug the public finance deficit have had a widespread impact yet there is debate about where the heaviest burden has fallen and where the economic stress has been felt most. The paper analyses data from the Survey of Income and Living Conditions for the period 2004 to 2011. The aim of the paper is to develop and test a measure of economic stress, which will capture some of the aspects of the rapid change in economic fortunes on Irish households that are not picked up by income alone. This includes tapping into features of the recession such as debt problems, unsustainable housing costs, and other difficulties associated with managing on reduced household income in a period of uncertainty. In testing such a measure we examine trends over time from boom to bust in the Irish economy and consider how economic stress is distributed across different socio-economic groups. The paper explores the distribution and level of economic stress across income class groups, social classes and the life-course and tests the thesis of ‘middle class squeeze’.
Resumo:
With a significant growth in the use of titanium alloys in the aviation manufacturing industry, the key challenge of making high-quality holes in the aircraft assembly process needs to be addressed. In this work, case studies deploying traditional drilling and helical milling technologies are carried out to investigate the tool life and hole surface integrity for hole-making of titanium alloy. Results show that the helical milling process leads to much longer tool life, generally lower hole surface roughness, and higher hole subsurface microhardness. In addition, no plastically deformed layer or white layer has been observed in holes produced by helical milling. In contrast, a slightly softened region was always present on the drilled surface. The residual stress distributions within the hole surface, including compressive and tensile residual stress, have also been investigated in detail.