Validation of back-calculation equations for juvenile bluefish (Pomatomus saltatrix) with the use of tetracycline-marked otoliths

In recent years, a decrease in the abundance of bluefish (Pomatomus saltatrix) has been observed (Fahay et al., 1999; Munch and Conover, 2000) that has led to increased interest in a better understanding the life history of the species. Estimates of several young-of-the-year (YOY) life history characteristics, including the importance and use of estuaries as nursery habitat (Kendall and Walford, 1979) and size-dependant mortality (Hare and Cowen, 1997), are reliant upon the accuracy of growth determination. By using otoliths, it is possible to use back-calculation formulae (BCFs) to estimate the length at certain ages and stages of development for many species of fishes. Use of otoliths to estimate growth in this way can provide the same information as long-term laboratory experiments and tagging studies without the time and expense of rearing or recapturing fish. The difficulty in using otoliths in this way lies in validating that 1) there is constancy in the periodicity of the increment formation, and 2) there is no uncoupling of the relationship between somatic and otolith growth. To date there are no validation studies demonstrating the relationship between otolith growth and somatic growth for bluefish. Daily increment formation in otoliths has been documented for larval (Hare and Cowen, 1994) and juvenile bluefish (Nyman and Conover, 1988). Hare and Cowen (1995) found ageindependent variability in the ratio of otolith size to body length in early age bluefish, although these differences varied between ontogenetic stages. Furthermore, there have been no studies where an evaluation of back-calculation methods has been combined with a validation of otolithderived lengths for juvenile bluefish.

Produção de açúcares a partir da palha de cana-de-açúcar para a produção de etanol

A crescente demanda por tecnologias que produzam biocombustíveis de maneira sustentável vem incentivando a utilização de diversos materiais lignocelulósicos para tal finalidade. O objetivo deste trabalho foi comparar o potencial de produção de açúcares (glicose e xilose) da palha e do bagaço de cana-de-açúcar. Inicialmente, as duas biomassas foram caracterizadas, mostrando percentuais muito similares de celulose e hemicelulose (42,1% e 22,6% para o bagaço e 39,2% e 22,7% para a palha, respectivamente). Isto evidencia potenciais similares de produção de açúcares. Posteriormente, foram realizados experimentos em laboratório para comparar os resultados de rendimento de xilose e produção de furfural após as reações de hidrólise ácida das duas biomassas, com o intuito de verificar se este processo, comumente utilizado para o bagaço, pode ser utilizado para a palha. As variáveis que foram avaliadas foram a concentração de ácido (0,5-3,0%m/m), o tempo reacional (15-60min) e a relação sólido-líquido (RSL - 0,1-0,2m/m). Concentrações de 42,72g/L e de 41,31g/L de xilose foram encontradas para a palha e para o bagaço, respectivamente, alcançando rendimentos de xilose superiores a 80%, em reações em laboratório. Também foram realizados ensaios de hidrólise ácida em planta piloto e de hidrólise enzimática em laboratório para avaliar os resultados de rendimento de glicose da palha. Os resultados de rendimento de xilose e produção de inibidores para estas reações foram avaliados e comparados com os dados obtidos em laboratório. Concentrações de 35,2g/Lde xilose e de 27,3g/L de glicose foram encontradas para a palha, alcançando rendimentos de xilose próximos a 100% e de glicose superiores a 64%, em reações de pré-tratamento em planta piloto e em reações de hidrólise enzimática em laboratório. Os resultados evidenciaram que as variáveis concentração de ácido e relação sólido:líquido são as mais influenciam na produção de xilose e glicose

Fish surveys on the Leven and Kent estuaries

This is the Wetland resource evaluation and the NRA's role in its conservation: Resource assessment report produced by North West Water in 1982. In this report data from a variety of sources in river Leven and Leven estuary have been examined to determine if there was any objective foundation for the allegations and for the assertion that poor fish catches were related to discharges of industrial effluent to the estuary. Catches of salmon and sea trout from the Leven did not appear to have suffered any long term declines and year to year fluctuations did not appear to be any more extreme than in other North West rivers. Fish surveys did not show any marked differences in the diversity or distribution of fish between the Kent and Leven estuaries but catches of flounders were consistently lower from the Leven estuary. Analysis of fisheries statistics of landings of fish and shellfish from Morecambe Bay did not show any evidence of localised declines in catches from the Leven estuary. Results of laboratory experiments suggested that populations of bivalve molluscs might be more at risk from the effects of discharges to the Leven estuary than resident or migratory fish.

The design, construction, operation, and maintenance of the Replicated Modular Estuarine Mesocosm

Perhaps the most difficult job of the ecotoxicologist is extrapolating data calculated from laboratory experiments with high precision and accuracy into the real world of highly-dynamics aquatic environments. The establishment of baseline laboratory toxicity testing data for individual compounds and ecologically important and field studies serve as a precursor to ecosystem level studies needed for ecological risk assessment. The first stage in the field portion of risk assessment is the determination of actual environmental concentrations of the contaminant being studied and matching those concentrations with laboratory toxicity tests. Risk estimates can be produced via risk quotients that would determine the probability that adverse effects may occur. In this first stage of risk assessment, environmental realism is often not achieved. This is due, in part, to the fact that single-species laboratory toxicity tests, while highly controlled, do not account for the complex interactions (Chemical, physical, and biological) that take place in the natural environment. By controlling as many variables in the laboratory as possible, an experiment can be produced in such a fashion that real effects from a compound can be determined for a particular test organism. This type of approach obviously makes comparison with real world data most difficult. Conversely, field oriented studies fall short in the interpretation of ecological risk assessment because of low statistical power, lack of adequate replicaiton, and the enormous amount of time and money needed to perform such studies. Unlike a controlled laboratory bioassay, many other stressors other than the chemical compound in question affect organisms in the environment. These stressors range from natural occurrences (such as changes in temperature, salinity, and community interactions) to other confounding anthropogenic inputs. Therefore, an improved aquatic toxicity test that will enhance environmental realism and increase the accuracy of future ecotoxicological risk assessments is needed.

Lunar, diurnal and tidal periodicity in relation to the prawn abundance and migration in the Godavari estuarine systems

Preliminary investigations to study the lunar, diurnal and tidal periodicity in abundance and migrations of prawns were made in the Bairavapalam distributary of the Goutami branch of the Godavari estuary during the period of November 1961 to July 1962. The study was based on observation of the catches of a stake net (bag net) operated near the mouth of the estuary. Records of the catches were maintained tidewise daily. Comparative estimates of abundance were made on the basis of catch per hour's operation. It was generally observed that the catches were higher during the darker half of the month than in the brighter fortnight. The landings during low tides were generally higher than those during high tides and usually heavier catches were made during nocturnal low tides than during the day low tides. A continuous inward and outward (immigration and emigration) movement of prawns of all size groups was observed in the estuary from November to July. In general, more penaeid prawns were found to be immigrating at dawn than at dusk. Similarly, the number of emigrants was also found to be generally higher during the new moon period than during the full moon. Metapenaeus monoceros showed an almost distinct nocturnal periodicity in migration, while no such periodicity was observed, distinctly, in other species. In the case of Penaeus indicus the movement of migrants was prolonged. In M. brevicornis the migrants were scarce till March and thereafter increased numerically. The migrant forms of Metapenaeus dobsoni continued to be abundant till May with peak periods in January and February. The migratory pattern of Metapenaeus affinis was similar to that of Metapenaeus brevicornis, though the migrants of the former species appeared a month earlier than the latter. Intensive studies over extended areas for longer periods are required to understand clearly the migratory pattern of the various species. The phenomenon of immigration of prawns can be clearly understood only by vital staining or tagging studies. Perhaps the emigrants might be returning with the succeeding changing life. To verify this, laboratory experiments, by vital stains, were conducted. The marked specimens, if released during the low tides on a large scale, may be recaptured during the subsequent high tides and the duration also may be calculated. At least some percentage of the emigrants remains in the sea for maturity and breeding.

Studies on the effect of compounded feeds on the growth of juvenile Banana prawn Penaeus merguiensis

Laboratory experiments were conducted to determine the effect of compounded feeds on growth of juveniles (3 to 4 cm) of the Banana prawn Penaeus merguiensis. In all, seven diets were prepared with different combinations of locally available ingredients. Diascure, a local tuber was used as source of carbohydrate and vitamin mineral mixture (1%) was used in all the diets. The results indicated that diets with groundnut cake (diet 2, 3, 5 and 7) produced better survival and growth. In diets 4 and 6 growth was good but survival was very poor. Amongst all the diets, diet 7 produced significantly better growth, survival and food conversion ratio.

Flame imaging of gas-turbine relight

High-altitude relight inside a lean-direct-injection gas-turbine combustor is investigated experimentally by highspeed imaging. Realistic operating conditions are simulated in a ground-based test facility, with two conditions being studied: one inside and one outside the combustor ignition loop. The motion of hot gases during the early stages of relight is recorded using a high-speed camera. An algorithm is developed to track the flame movement and breakup, revealing important characteristics of the flame development process, including stabilization timescales, spatial trajectories, and typical velocities of hot gas motion. Although the observed patterns of ignition failure are in broad agreement with results from laboratory-scale studies, other aspects of relight behavior are not reproduced in laboratory experiments employing simplified flow geometries and operating conditions. For example, when the spark discharge occurs, the air velocity below the igniter in a real combustor is much less strongly correlated to ignition outcome than laboratory studies would suggest. Nevertheless, later flame development and stabilization are largely controlled by the cold flowfield, implying that the location of the igniter may, in the first instance, be selected based on the combustor cold flow. Copyright © 2010.

Salinity and survival of Martesia striata (Linn) in Cochin harbour

The effects of salinity variations on the survival of Martesia striata from Cochin harbour are presented. It is observed that at least a few of the animals survive the low saline conditions during monsoon. Laboratory experiments showed the lethal salinity as 6‰ when animals acclimatised in 34‰ were subjected to abrupt changes in salinity. But acclimatisation to 17‰ salinity showed a downward shift in the lethal salinity to 4‰. The present observations indicate that M. striata is euryhaline arid the extent of tolerance to lower salinities depends on the degree of acclimatisation.

A preliminary report on the use of methallibure in tilapia culture

The aim of this research was to retard the onset of maturation and breeding using Methallibure (I.e.I. 33,828), thereby allowing more time for somatic growth. The process of development of the gonads was studied, laboratory experiments were performed upon a breeding stock of Tilapia in an attempt to postpone spawning, and the results of these investigations were tested, on fish in ponds at the Fish Culture Research Station in Israel.

Ready configuration of machines into an existing manufacturing system

This paper focuses on simplifying and easing the integration of a new machine into an existing conventional hierarchical manufacturing system. Based on a distributed manufacturing paradigm, it proposes the functions and interfaces that a new machine and an existing manufacturing system should possess so that ready and simple configuration of additional machines can be achieved. The configuration process is intended to include, not only mechanical and electrical interfaces, but also decision system interfaces (such as planning, scheduling, and shop-floor control). Preliminary laboratory experiments to compare the reconfigurability resulting from a conventional integration method and the proposed distributed method are presented and discussed. © 2007 ISAM.

Displacement and mixing ventilation driven by opposing wind and buoyancy

The effect of an opposing wind on the stratification and flow produced by a buoyant plume rising from a heat source on the floor of a ventilated enclosure is investigated. Ventilation openings located at high level on the windward side of the enclosure and at low level on the leeward side allow a wind-driven flow from high to low level, opposite to the buoyancy-driven flow. One of two stable steady flow regimes is established depending on a dimensionless parameter F that characterizes the relative magnitudes of the wind-driven and buoyancy-driven velocities within the enclosure, and on the time history of the flow. A third, unstable steady flow solution is identified. For small opposing winds (small F) a steady, two-layer stratification and displacement ventilation is established. Exterior fluid enters through the lower leeward openings and buoyant interior fluid leaves through the upper windward openings. As the wind speed increases, the opposing wind may cause a reversal in the flow direction. In this case, cool exterior fluid enters through the high windward openings and mixes the interior fluid, which exits through the leeward openings. There are now two possibilities. If the rate of heat input by the source exceeds the rate of heat loss through the leeward openings, the temperature of the interior increases and this flow reversal is only maintained temporarily. The buoyancy force increases with time, the flow reverts to its original direction, and steady two-layer displacement ventilation is re-established and maintained. In this regime, the increase in wind speed increases the depth and temperature of the warm upper layer, and reduces the ventilation flow rate. If, on the other hand, the heat loss exceeds the heat input, the interior cools and the buoyancy-driven flow decreases. The reversed flow is maintained, the stratification is destroyed and mixing ventilation occurs. Further increases in wind speed increase the ventilation rate and decrease the interior temperature. The transitions between the two ventilation flow patterns exhibit hysteresis. The change from displacement ventilation to mixing ventilation occurs at a higher F than the transition from mixing to displacement. Further, we find that the transition from mixing to displacement ventilation occurs at a fixed value of F, whereas the transition from displacement to mixing flow is dependent on the details of the time history of the flow and the geometry of the openings, and is not determined solely by the value of F. Theoretical models that predic t the steady stratification profiles and flow rates for the displacement and mixing ventilation, and the transitions between them, are presented and compared with measurements from laboratory experiments. The transition between these ventilation patterns completely changes the internal environment, and we discuss some of the implications for the natural ventilation of buildings. © 2004 Cambridge University Press.

Characterisation and fluidisation of synthetic pit latrine sludge

Half of the world’s urban population will live in informal settlements or “slums” by 2030. Affordable urban sanitation presents a unique set of challenges as the lack of space and resources to construct new latrines makes the de-sludging of existing pits necessary and is something that is currently done manually with significant associated health risks. Therefore various mechanised technologies have been developed to facilitate pit emptying, with the majority using a vacuum system to remove material from the top of the pit. However, this results in the gradual accumulation of unpumpable sludge in the pit, which eventually fills the latrine and forces it to be abandoned. This study has developed a method for fluidising unpumpable pit latrine sludge, based on laboratory experiments using a harmless synthetic sludge. Such a sludge consisting of clay and compost was developed to replicate the physical characteristics of pit latrine sludges characterised in Botswana during the 1980s. Undrained shear strength and density are identified as the critical parameters in controlling pumpability and a method of sludge characterisation based on these parameters is reported. In a series of fluidisation tests using a one fifth scale pit emptying device the reduction in sludge shear strength was found to be caused by i) dilution, which increases water content, and ii) remoulding, which involves mechanical agitation to break down the structure of the material. The tests demonstrated that even the strongest of sludges could be rendered “pumpable” by sufficient dilution. Additionally, air injection alone produced a three-fold decrease in strength of consolidated samples as a result of remoulding at constant water content. The implications for sludge treatment and disposal are discussed, and the classification of sludges according to the equipment required to remove them from the latrine is proposed. Possible field tests to estimate sludge density and shear strength are suggested. The feasibility of using low cost vacuum cleaners to replace expensive vane pumps is demonstrated. This offers great potential for the development of affordable pit emptying technologies that can remove significantly stronger sludges than current devices through fluidising the wastes at the bottom of the pit before emptying

Change impact on a product and its redesign process: A tool for knowledge capture and reuse

Change propagates, potentially affecting many aspects of a design and requiring much rework to implement. This article introduces a cross-domain approach to decompose a design and identify possible change propagation linkages, complemented by an interactive tool that generates dynamic checklists to assess change impact. The approach considers the information domains of requirements, functions, components, and the detail design process. Laboratory experiments using a vacuum cleaner suggest that cross-domain modelling helps analyse a design to create and capture the information required for change prediction. Further experiments using an electronic product show that this information, coupled with the interactive tool, helps to quickly and consistently assess the impact of a proposed change. © 2012 Springer-Verlag London Limited.

Ventilation effectiveness measures based on heat removal: Part 2. Application to natural ventilation flows

The three effectiveness measures based on the ability of a flow to flush buoyancy from a ventilated space proposed by Coffey and Hunt [Ventilation effectiveness measures based on heat removal-part 1. Definitions. Building and Environment, in press, doi:10.1016/j.buildenv.2006.03.016.] are applied to assess and compare two fundamental natural ventilation flows. We focus on the limiting cases of passive displacement and passive mixing ventilation flows during transient conditions. These transient flows occur when, for example, heat is purged from a building at night. Whilst it is widely recognised that mixing flows are less efficient at purging heat than displacement flows, our results indicate that, when a particular zone of a room is considered, displacement ventilation can result in lower effectiveness than mixing ventilation. When a room is considered as a whole, displacement ventilation yields higher effectiveness than mixing ventilation and we quantify these differences in terms of the geometry of the space and opening area. The proposed theoretical predictions are compared with effectiveness deduced from measurements made during laboratory experiments and show good agreement. © 2006 Elsevier Ltd. All rights reserved.

Fundamental atrium design for natural ventilation

An atrium is a central feature of many modern naturally ventilated building designs. The atrium fills with warm air from the adjoining storeys: this air may be further warmed by direct solar heating in the atrium, and the deep warm layer enhances the flow. In this paper we focus on the degree of flow enhancement achieved by an atrium which is itself 'ventilated' directly, by a low-level connection to the exterior. A theoretical model is developed to predict the steady stack-driven displacement flow and thermal stratification in the building, due to heat gains in the storey and solar gains in the atrium, and compared with the results of laboratory experiments. Direct ventilation of the atrium is detrimental to the ventilation of the storey and the best design is identified as a compromise that provides adequate ventilation of both spaces. We identify extremes of design for which an atrium provides no significant enhancement of the flow, and show that an atrium only enhances the flow in the storey if its upper opening is of an intermediate size, and its lower opening is sufficiently small. © 2003 Elsevier Science Ltd. All rights reserved.