Marbles and carbonate rocks from central Morocco: a petrographic, mineralogical and geochemical study

Petrographic, mineralogical, and stable isotopes (delta C-13, delta O-18 values) compositions were used to characterise marbles and sedimentary carbonate rocks from central Morocco, which are considered to be a likely source of ornamental and building material from Roman time to the present day. This new data set was used in the frame of an archaeometric provenance study on Roman artefacts from the town of Thamusida (Kenitra, north Morocco), to assess the potential employment of these rocks for the manufacture of the archaeological materials. A representative set of samples from marbles and other carbonate rocks (limestone, dolostone) were collected in several quarries and outcrops in the Moroccan Meseta, in a region extending from the Meknes-Khenifra alignment to the Atlantic Ocean. All the samples were studied using a petrographic, mineralogical and geochemical methods. The petrographic and minerological investigations (optical microscopy, electron microscopy, X-ray diffraction) allowed to group the carbonate rocks in limestones, foliated limestone, diagenetic breccias and dolostone. The limestones could be further grouped as mudstones, wackestones-packstones, crinoid grainstones, oolitic grainstone and floatstones. Textural differences allowed to define marbles varieties. The stable carbon and oxygen isotope composition proved to be quite useful in the discrimination of marble sources, with apparently less discriminatory potential for carbonate rocks.

Carbon dioxide in scree slope deposits: A pathway from atmosphere to pedogenic carbonate

A continuum of carbon, from atmospheric CO2 to secondary calcium carbonate, has been studied in a soil associ- ated with scree slope deposits in the Jura Mountains of Switzerland. This approach is based on former studies conducted in other environments. This C continuum includes atmospheric CO2, soil organic matter (SOM), soil CO2, dissolved inorganic carbon (DIC) in soil solutions, and secondary pedogenic carbonate. Soil parameters (pCO2, temperature, pH, Cmin and Corg contents), soil solution chemistry, and isotopic compositions of soil CO2, DIC, carbonate and soil organic matter (δ13CCO2, δ13CDIC, δ13Ccar and δ13CSOM values) have been monitored at different depths (from 20 to 140 cm) over one year. Results demonstrated that the carbon source in secondary carbonate (mainly needle fiber calcite) is related to the dissolved inorganic carbon, which is strongly dependent on soil respiration. The heterotrophic respiration, rather than the limestone parent material, seems to control the pedogenic carbon cycle. The correlation of δ13Corg values with Rock-Eval HI and OI indices demonstrates that, in a soil associated to scree slope deposits, the main process responsible for 13C-enrichment in SOM is related to bac- terial oxidative decarboxylation. Finally, precipitation of secondary calcium carbonate is enhanced by changes in soil pCO2 associated to the convective movement of air masses induced by temperature gradients (heat pump effect) in the highly porous scree slope deposits. The exportation of soil C-leachates from systems such as the one studied in this paper could partially explain the "gap in the European carbon budget" reported by recent studies.

Les symbioses agro-industrielles en Afrique de l'Ouest : évaluation du potentiel d'une nouvelle stratégie pour un développement durable

RésuméCette thèse traite de l'utilisation des concepts de Symbiose Industrielle dans les pays en développement et étudie le potentiel de cette stratégie pour stimuler un développement régional durable dans les zones rurales d'Afrique de l'Ouest. En particulier, lorsqu'une Symbiose Industrielle est instaurée entre une usine et sa population alentour, des outils d'évaluation sont nécessaires pour garantir que le projet permette d'atteindre un réel développement durable. Les outils existants, développés dans les pays industrialisés, ne sont cependant pas complètement adaptés pour l'évaluation de projets dans les pays en développement. En effet, les outils sont porteurs d'hypothèses implicites propres au contexte socio-économique dans lequel ils ont été conçus.L'objectif de cette thèse est de développer un cadre méthodologique pour l'évaluation de la durabilité de projets de Symbiose Industrielle dans les pays en développement.Pour ce faire, je m'appuie sur une étude de cas de la mise en place d'une Symbiose Industrielle au nord du Nigéria, à laquelle j'ai participé en tant qu'observatrice dès 2007. AshakaCem, une usine productrice de ciment du groupe Lafarge, doit faire face à de nombreuses tensions avec la population rurale alentour. L'entreprise a donc décidé d'adopter une nouvelle méthode inspirée des concepts de Symbiose Industrielle. Le projet consiste à remplacer jusqu'à 10% du carburant fossile utilisé pour la cuisson de la matière crue (calcaire et additifs) par de la biomasse produite par les paysans locaux. Pour ne pas compromettre la fragile sécurité alimentaire régionale, des techniques de lutte contre l'érosion et de fertilisation naturelle des sols sont enseignées aux paysans, qui peuvent ainsi utiliser la culture de biomasse pour améliorer leurs cultures vivrières. A travers cette Symbiose Industrielle, l'entreprise poursuit des objectifs sociaux (poser les bases nécessaires à un développement régional), mais également environnementaux (réduire ses émissions de CO2 globales) et économiques (réduire ses coûts énergétiques). Elle s'ancre ainsi dans une perspective de développement durable qui est conditionnelle à la réalisation du projet.A travers l'observation de cette Symbiose et par la connaissance des outils existants je constate qu'une évaluation de la durabilité de projets dans les pays en développement nécessite l'utilisation de critères d'évaluation propres à chaque projet. En effet, dans ce contexte, l'emploi de critères génériques apporte une évaluation trop éloignée des besoins et de la réalité locale. C'est pourquoi, en m'inspirant des outils internationalement reconnus comme l'Analyse du Cycle de Vie ou la Global Reporting Initiative, je définis dans cette thèse un cadre méthodologique qui peut, lui, être identique pour tous les projets. Cette stratégie suit six étapes, qui se réalisent de manière itérative pour permettre une auto¬amélioration de la méthodologie d'évaluation et du projet lui-même. Au cours de ces étapes, les besoins et objectifs en termes sociaux, économiques et environnementaux des différents acteurs sont déterminés, puis regroupés, hiérarchisés et formulés sous forme de critères à évaluer. Des indicateurs quantitatifs ou qualitatifs sont ensuite définis pour chacun de ces critères. Une des spécificités de cette stratégie est de définir une échelle d'évaluation en cinq graduations, identique pour chaque indicateur, témoignant d'un objectif totalement atteint (++) ou pas du tout atteint (--).L'application de ce cadre méthodologique à la Symbiose nigériane a permis de déterminer quatre critères économiques, quatre critères socio-économiques et six critères environnementaux à évaluer. Pour les caractériser, 22 indicateurs ont été définis. L'évaluation de ces indicateurs a permis de montrer que le projet élaboré atteint les objectifs de durabilité fixés pour la majorité des critères. Quatre indicateurs ont un résultat neutre (0), et un cinquième montre qu'un critère n'est pas atteint (--). Ces résultats s'expliquent par le fait que le projet n'en est encore qu'à sa phase pilote et n'a donc pas encore atteint la taille et la diffusion optimales. Un suivi sur plusieurs années permettra de garantir que ces manques seront comblés.Le cadre méthodologique que j'ai développé dans cette thèse est un outil d'évaluation participatif qui pourra être utilisé dans un contexte plus large que celui des pays en développement. Son caractère générique en fait un très bon outil pour la définition de critères et indicateurs de suivi de projet en terme de développement durable.SummaryThis thesis examines the use of industrial symbiosis in developing countries and studies its potential to stimulate sustainable regional development in rural areas across Western Africa. In particular, when industrial symbiosis is instituted between a factory and the surrounding population, evaluation tools are required to ensure the project achieves truly sustainable development. Existing tools developed in industrialized countries are not entirely suited to assessing projects in developing countries. Indeed, the implicit hypotheses behind such tools reflect the socioeconomic context in which they were designed. The goal of this thesis is to develop a methodological framework for evaluating the sustainability of industrial symbiosis projects in developing countries.To accomplish this, I followed a case study about the implementation of industrial symbiosis in northern Nigeria by participating as an observer since 2007. AshakaCem, a cement works of Lafarge group, must confront many issues associated with violence committed by the local rural population. Thus, the company decided to adopt a new approach inspired by the concepts of industrial symbiosis.The project involves replacing up to 10% of the fossil fuel used to heat limestone with biomass produced by local farmers. To avoid jeopardizing the fragile security of regional food supplies, farmers are taught ways to combat erosion and naturally fertilize the soil. They can then use biomass cultivation to improve their subsistence crops. Through this industrial symbiosis, AshakaCem follows social objectives (to lay the necessary foundations for regional development), but also environmental ones (to reduce its overall CO2 emissions) and economical ones (to reduce its energy costs). The company is firmly rooted in a view of sustainable development that is conditional upon the project's execution.By observing this symbiosis and by being familiar with existing tools, I note that assessing the sustainability of projects in developing countries requires using evaluation criteria that are specific to each project. Indeed, using generic criteria results in an assessment that is too far removed from what is needed and from the local reality. Thus, by drawing inspiration from such internationally known tools as Life Cycle Analysis and the Global Reporting Initiative, I define a generic methodological framework for the participative establishment of an evaluation methodology specific to each project.The strategy follows six phases that are fulfilled iteratively so as to improve the evaluation methodology and the project itself as it moves forward. During these phases, the social, economic, and environmental needs and objectives of the stakeholders are identified, grouped, ranked, and expressed as criteria for evaluation. Quantitative or qualitative indicators are then defined for each of these criteria. One of the characteristics of this strategy is to define a five-point evaluation scale, the same for each indicator, to reflect a goal that was completely reached (++) or not reached at all (--).Applying the methodological framework to the Nigerian symbiosis yielded four economic criteria, four socioeconomic criteria, and six environmental criteria to assess. A total of 22 indicators were defined to characterize the criteria. Evaluating these indicators made it possible to show that the project meets the sustainability goals set for the majority of criteria. Four indicators had a neutral result (0); a fifth showed that one criterion had not been met (--). These results can be explained by the fact that the project is still only in its pilot phase and, therefore, still has not reached its optimum size and scope. Following up over several years will make it possible to ensure these gaps will be filled.The methodological framework presented in this thesis is a highly effective tool that can be used in a broader context than developing countries. Its generic nature makes it a very good tool for defining criteria and follow-up indicators for sustainable development.

Avaluació de la capacitat de segrest de carboni d'un sòl restaurat amb fangs de depuradora: estabilitat de la matèria orgànica

L’avaluació de la capacitat de segrest de carboni d’un sòl denudat per l’extracció de calcàries i la seva posterior restauració amb fangs de depuradora s’ha realitzat mitjançant l’anàlisi de l’estabilitat de la matèria orgànica del sòl (MOS) en funció de la dosi de fangs aplicada. Els resultats d’aquest treball demostren dos fets fonamentals per a l’estudi de la capacitat de segrest de carboni, els qual són: la conservació del contingut total de MOS i l’augment de la seva estabilitat fins a nivells més alts que els de la MOS de les parcel·les de control. Aquests resultats són explicables per (i) la conservació i augment de la MOS recalcitrant, i (ii) la protecció d’una porció més o menys rellevant de la MO làbil continguda amb els fangs gràcies a l’acció simultània dels mecanismes d’estabilització de la MOS, com són: l’estabilització bioquímica (humificació), química, física, a més de la pròpia hidrofobicitat de la MOS, aquests dos últims potenciats per l’addicció del fangs de depuradora.

La datació de l'Esfinx de Guiza, més enllà del debat científic?

El present treball analitza tant el procés seguit per a determinar qui va modelar l'Esfinx de Guiza a partir de la roca calcària que s'erigeix al centre d'una immensa rasa i en quin moment de la història d'Egipte es va construir com la tipologia de les reaccions que han tingut lloc, en l'àmbit científic, respecte d'un plantejament plenament rupturista que suposa una revisió dràstica de l'edat que se li atribueix.

Middle and Late Jurassic carbon stable-isotope stratigraphy and radiolarite sedimentation of the Umbria-Marche basin (Central Italy)

A continuous carbon isotope curve from Middle-Upper Jurassic pelagic carbonate rocks was acquired from two sections in the southern part of the Umbria-Marche Apennines in central Italy. At the Colle Bertone section (Terni) and the Terminilletto section (Rieti), the Upper Toarcian to Bajocian Calcari e Marne a Posidonia Formation and the Aalenian to Kimmeridgian Calcari e Marne a Posidonia and Calcari Diasprigni formations were sampled, respectively. Biostratigraphy in both sections is based on rich assemblages of calcareous nannofossils and radiolarians, as well as some ammonites found in the upper Toarcian-Bajocian interval. Both sections revealed a relative minimum of delta(13)C(PDB) close to + 2 parts per thousand in the Aalenian and a maximum around 3.5 parts per thousand in early Bajocian, associated with an increase in visible chert. In basinal sections in Umbria-Marche, this interval includes the very cherry base of the Calcari Diasprigni Formation (e.g. at Valdorbia) or the chert-rich uppermost portion of the Calcari a Posidonia (e.g at Bosso). In the Terminilletto section, the Bajocian-early Barthonian interval shows a gradual decrease in delta(13)C(PDB) values and a low around 2.3 parts per thousand. This part of the section is characterised by more than 40 m of almost chart-free limestones and correlates with a recurrence of limestone-rich facies in basinal sections at Valdorbia. A double peak with values of delta(13)C(PDB) around + 3 parts per thousand was observed in the Callovian and Oxfordian, constrained by well preserved radiolarian faunas. The maxima lie in the Callovian and the middle Oxfordian, and the minimum between the two peaks should be near the Callovian/Oxfordian boundary. In the Terminilletto section, visible chert increases together with delta(13)C(PDB) values from the middle Bathonian and reaches peak values in the Callovian-Oxfordian. In basinal sections in Umbria-Marche, a sharp increase in visible chert is observed at this level within the Calcari Diasprigni. A drop of delta(13)C values towards + 2 parts per thousand occurs in the Kimmeridgian and coincides with a decrease of visible chert in outcrop. The observed delta(13)C positive anomalies during the early Bajocian and the Callovian-Oxfordian may record changes in global climate towards warmer, more humid periods characterised by increased nutrient mobilisation and increased carbon burial. High biosiliceous (radiolarians, siliceous sponges) productivity and preservation appear to coincide with the delta(13)C positive anomalies, when the production of platform carbonates was subdued and ceased in many areas, with a drastic reduction of periplatform ooze input in many Tethyan basins. The carbon and silica cycles appear to be linked through global warming and increased continental weathering. Hydrothermal events related to extensive rifting and/or accelerated oceanic spreading may be the endogenic driving force that created a perturbation of the exogenic system (excess CO2 into the atmosphere and greenhouse conditions) reflected by the positive delta(13)C shifts and biosiliceous episodes.

Assessing sedimentary evolution by means of Sr-isotope ratios : 3 case studies on the Caribbean plate : (Cretaceous: Nicoya Peninsula, Costa Rica, Tertiary: Hess Rise, and La Désirade, Guadeloupe, France)

The understanding of sedimentary evolution is intimately related to the knowledge of the exact ages of the sediments. When working on carbonate sediments, age dating is commonly based on paleontological observations and established biozonations, which may prove to be relatively imprecise. Dating by means of strontium isotope ratios in marine bioclasts is the probably best method in order to precisely date carbonate successions, provided that the sample reflects original marine geochemical characteristics. This requires a precise study of the samples including its petrography, SEM and cathodoluminescence observations, stable carbon and oxygen isotope geochemistry and finally the strontium isotope measurement itself. On the Nicoya Peninsula (Northwestern Costa Rica) sediments from the Piedras Blancas Formation, Nambi Formation and Quebrada Pavas Formation were dated by the means of strontium isotope ratios measured in Upper Cretaceous Inoceramus shell fragments. Results have shown average 87Sr/86Sr values of 0.707654 (middle late Campanian) for the Piedras Blancas Formation, 0.707322 (Turonian-Coniacian) for the Nambi Formation and 0.707721 (late Campanian-Maastrichtian) for the Quebrada Pavas Formation. Abundant detrital components in the studied formations constitute a difficulty to strontium isotope dating. In fact, the fossil bearing sediments can easily contaminate the target fossil with strontium mobilized form basalts during diagenesis and thus the obtained strontium isotope ratios may be influenced significantly and so will the obtained ages. The new and more precise age assignments allow for more precision in the chronostratigraphic chart of the sedimentary and tectonic evolution of the Nicoya Peninsula, providing a better insight on the evolution of this region. Meteor Cruise M81 dredged shallow water carbonates from the Hess Rise and Hess Escarpment during March 2010. Several of these shallow water carbonates contain abundant Larger Foraminifera that indicates an Eocene-Oligocene age. In this study the strontium isotope values ranging from 0.707847 to 0.708238 can be interpreted as a Rupelian to Chattian age of these sediments. These platform sediments are placed on seamounts, now located at depths reaching 1600 m. Observation of sedimentologic characteristics of these sediments has helped to resolve apparent discrepancies between fossil and strontium isotope ages. Hence, it is possible to show that the subsidence was active during early Miocene times. On La Désirade (Guadeloupe France), the Neogene to Quaternary carbonate cover has been dated by microfossils and some U/Th-ages. Disagreements subsisted in the paleontological ages of the formations. Strontium isotope ratios ranging from 0.709047 to 0.709076 showed the Limestone Table of La Désirade to range from an Early Pliocene to Late Pliocene/early Pleistocene age. A very late Miocene age (87Sr/86Sr =0.709013) can be determined to the Detrital Offshore Limestone. The flat volcanic basement had to be eroded by wave-action during a long-term stable relative sea-level. Sediments of the Table Limestone on La Désirade show both low-stand and high-stand facies that encroach on the igneous basement, implying deposition during a major phase of subsidence creating accommodation space. Subsidence is followed by tectonic uplift documented by fringing reefs and beach rocks that young from the top of the Table Limestone (180 m) towards the present coastline. Strontium isotope ratios from two different fringing reefs (0.707172 and 0.709145) and from a beach rock (0.709163) allow tentative dating, (125ky, ~ 400ky, 945ky) and indicate an uplift rate of about 5cm/ky for this time period of La Désirade Island. The documented subsidence and uplift history calls for a new model of tectonic evolution of the area.

Latest Miocene - Pliocene Larger Foraminifera and depositional environments of the carbonate bank of La Désirade Island, Guadeloupe (French Antilles)

In this paper we present first results of the study of planktonic Foraminifera, large benthic Foraminifera and carbonate facies of La Désirade, aiming at a definition of the age and depositional environments of the Neogene carbonates of this island. The study of planktonic Foraminifera from the Detrital Offshore Limestones (DOL) of the Anciènne Carrière allows to constrain the biochronology of this formation to the lower Zone N19 and indicates a latest Miocene to early Pliocene (5.48 - 4.52 Ma) age. Large benthic Foraminifera were studied both as isolated and often naturally split specimens from the DOL, and in thin sections of limestones from the DOL and the Limestone Table (LT). The assemblages of Foraminifera include Nummulitidae, Amphisteginidae, Asterigerinidae, Peneroplidae, Soritidae, Rotalidae (Globigerinidae: Globigerinoides, Sphaeroidenellopsis, Orbulina) and incrusting Foraminifera (Homotrema and Sporadotrema). The genera Amphistegina, Archaias and Operculina are discussed. Concerning the Nummulitidae we include both "Paraspiroclypeus" chawneri and "Nummulites" cojimarensis, as well as a newly described species, Operculina desiradensis new species, in the genus Operculina, because the differences between these 3 species are rather on the specific than the generic level, while their morphology, studied by SEM, is compatible with the definition of the genus Operculina (D'Orbigny1826, emend. Hottinger 1977). The three species can be easily distinguished on the basis of their differences in spiral growth: while O. desiradensis has an overall logarithmic spiral growth, O. cojimarensis and especially O. chawneri show a tighter and more geometric spiral growth. O. cojimarensis and O. chawneri were originally described from Cuba in outcrops originally dated as Oligocene and later redated as early Pliocene. Therefore, O. chawneri was considered until now as restricted to the early Pliocene. However, in the absence of a detailed morphometric and biostratigraphic study of the Caribbean Neogene nummulitids, it is difficult to evaluate the biochronologic range of these species.The history of the carbonates begins with the initial tectonic uplift and erosion of the Jurassic igneous basement of La Désirade, that must have occurred at latest in late Miocene times, when sea-level oscillated around a long term stable mean. The rhythmic deposition of the Désirade Limestone Table (LT) can be explained by synsedimentary subsidence in a context of rapidly oscillating sea-level due to precession-driven (19-21 kyr) glacio-eustatic sea-level changes during the latest Miocene- Pliocene. Except for a thin reef cap present at the eastern edge of the LT, no other in-place reefal constructions have been observed in the LT. The DOL of western Désirade are interpreted as below wave base gravity deposits that accumulated beneath a steep fore-reef slope. They document the mobilisation of carbonate material (including Larger Foraminifera) from an adjacent carbonate platform by storms and their gravitational emplacement as debris and grain flows. The provenance of both the reefal carbonate debris and the tuffaceous components redeposited in the carbonates of La Désirade must be to the west, i. e. the carbonate platforms of Marie Galante and Grande Terre.

Sr, C and O isotope systematics in the Pucara Basin, central Peru - Comparison between Mississippi Valley-type deposits and barren areas

A combined Sr, O and C isotope study has been carried out in the Pucara basin, central Peru, to compare local isotopic trends of the San Vicente and Shalipayco Zn-Pb Mississippi Valley-type (MVT) deposits with regional geochemical patterns of the sedimentary host basin. Gypsum, limestone and regional replacement dolomite yield Sr-87/Sr-86 ratios that fall within or slightly below the published range of seawater Sr-87/Sr-86 values for the Lower Jurassic and the Upper Triassic. Our data indicate that the Sr isotopic composition of seawater between the Hettangian and the Toarcian may extend to lower Sr-87/Sr-86 ratios than previously published values. An Sr-87-enrichment is noted in (1) carbonate rocks from the lowermost part of the Pucara basin, and (2) different carbonate generations at the MVT deposits. This indicates that host rocks at MVT deposits and in the lowermost part of the carbonate sequence interacted with Sr-87-enriched fluids. The fluids acquired their radiogenic nature by interaction with lithologies underlying the carbonate rocks of the Pucara basin. The San Ramon granite, similar Permo-Triassic intrusions and their elastic derivatives in the Mitu Group are likely sources of radiogenic Sr-87. The Brazilian shield and its erosion products are an additional potential source of radiogenic Sr-87. Volcanic rocks of the Mitu Group are not a significant source for radiogenic Sr-87; however, molasse-type sedimentary rocks and volcaniclastic rocks cannot be ruled out as a possible source of radiogenic Sr-87. The marked enrichment in Sr-87 of carbonates toward the lower part of the Pucara Group is accompanied by only a slight decrease in delta(18)O values and essentially no change in delta(13)C values, whereas replacement dolomite and sparry carbonates at the MVT deposits display a coherent trend of progressive Sr-87-enrichment, and O-18- and C-13-depletion. The depletion in O-18 in carbonates from the MVT deposits are likely related to a temperature increase, possibly coupled with a O-18-enrichment of the ore-forming fluids. Progressively lower delta(13)C values throughout the paragenetic sequence at the MVT deposits are interpreted as a gradually more important contribution from organically derived carbon. Quantitative calculations show that a single fluid-rock interaction model satisfactorily reproduces the marked Sr-87-enrichment and the slight decrease in delta(18)O values in carbonate rocks from the lower part of the Pucara Group. By contrast, the isotopic covariation trends of the MVT deposits are better reproduced by a model combining fluid mixing and fluid-rock interaction. The modelled ore-bearing fluids have a range of compositions between a hot, saline, radiogenic brine that had interacted with lithologies underlying the Pucara sequence and cooler, dilute brines possibly representing local fluids within the Pucara sequence. The composition of the local fluids varies according to the nature of the lithologies present in the neighborhood of the different MVT deposits. The proportion of the radiogenic fluid in the modelled fluid mixtures interacting with the carbonate host rocks at the MVT deposits decreases as one moves up in the stratigraphic sequence of the Pucara Group.

Modelling changes in stable isotope compositions of minerals during net transfer reactions in a contact aureole: Wollastonite growth at the northern Hunter Mountain Batholith (Death Valley National Park, USA)

One of the world's largest wollastonite deposits was formed at the contact of the northern Hunter Mountain Batholith (California, USA) in Paleozoic sediments. Wollastonite occurs as zones of variable thickness surrounding layers or nodules of quartzite in limestones. A minimum formation temperature of 650 degrees C is estimated from isolated periclase-bearing lenses in that area. Contact metamorphism of siliceous carbonates has produced mineral assemblages that are consistent with heterogeneous, and partly limited infiltration of water-rich fluids, compatible with O-18/O-16 and C-13/C-12 isotopic patterns recorded in carbonates. Oxygen isotope compositions of wollastonites in the study area may also not require infiltration of large quantities of externally-derived fluids that were out of equilibrium with the rocks. 8180 values of wollastonite are high (14.8 parts per thousand to 25.0 parts per thousand; median: 19.7 parts per thousand) and close to those of the host limestone (19.7 parts per thousand to 28 parts per thousand; median: 24.9 parts per thousand) and quartz (18.0 parts per thousand. to 29.1 parts per thousand; median: 22.6 parts per thousand). Isotopic disequilibrium exists at quartz/wollastonite and wollastonite/calcite boundaries. Therefore, classical batch/Rayleigh fractionation models based on reactant and product equilibrium are not applicable to the wollastonite rims. An approach that relies on local instantaneous mass balance for the reactants, based on the wollastonite-forming reaction is suggested as an alternative way to model wollastonite reaction rims. This model reproduces many of the measured delta O-18 values of wollastonite reaction rims of the current study to within +/- 1 parts per thousand, even though the wollastonite compositions vary by almost 10 parts per thousand. (C) 2011 Elsevier B.V. All rights reserved.

A better understanding of ecological conditions for Leontopodium alpinum Cassini in the Swiss Alps

Although Leontopodium alpinum is considered to be threatened in many countries, only limited scientific information about its autecology is available. In this study, we aim to define the most important ecological factors which influence the distribution of L. alpinum in the Swiss Alps. These were assessed at the national scale using species distribution models based on topoclimatic predictors and at the community scale using exhaustive plant inventories. The latter were analysed using hierarchical clustering and principal component analysis, and the results were interpreted using ecological indicator values. L. alpinum was found almost exclusively on base-rich bedrocks (limestone and ultramaphic rocks). The species distribution models showed that the available moisture (dry regions, mostly in the Inner Alps), elevation (mostly above 2000 m.a.s.l.) and slope (mostly >30°) were the most important predictors. The relevés showed that L. alpinum is present in a wide range of plant communities, all subalpine-alpine open grasslands, with a low grass cover. As a light-demanding and short species, L. alpinum requires light at ground level; hence, it can only grow in open, nutrient-poor grasslands. These conditions are met in dry conditions (dry, summer-warm climate, rocky and draining soil, south-facing aspect and/or steep slope), at high elevations, on oligotrophic soils and/or on windy ridges. Base-rich soils appear to also be essential, although it is still unclear if this corresponds to physiological or ecological (lower competition) requirements.

Anachronistic facies from a drowned Lower Triassic carbonate platform: Lower member of the Alwa Formation (Ba'id Exotic), Oman Mountains

- The lower member of the Alwa Formation (Lower Olenekian), found within the Ba'id Exotic in the Oman Mountains (Sultanate of Oman), consists of ammonoid-bearing, pelagic limestones that were deposited on an isolated, drowned carbonate platform on the Neotethyan Gondwana margin. The strata contain a variety of unusual carbonate textures and features, including thrombolites, Frutexites-bearing microbialites that contain synsedimentary cements, matrix-free breccias surrounded by isopachous calcite cement, and fissures and cavities filled with large botryoidal cements. Thrombolites are found throughout the study interval, and occur as 0.5-1.0 m thick lenses or beds that contain laterally laterally-linked stromatactis cavities. The Frutexites-bearing microbialites occur less frequently, and also form lenses or beds, up to 30 cm thick; the microbialites may be laminated, and often developed on hardgrounds. In addition, the Frutexites-bearing microbialites also contain synsedimentary calcite cement crusts and botryoids (typically <1 cm thick) that harbour layers or pockets of what appear to be bacterial sheaths and coccoids, and are indicative of biologically mediated precipitation of the cement bodies. Slumping following lithification led to fracturing of the limestone and the precipitation of large, botryoidal aragonite cements in fissures that cut across the primary fabric. Environmental conditions, specifically palaeoxygenation and the degree of calcium carbonate supersaturation, likely controlled whether the thrombolites (high level of calcium carbonate supersaturation associated with vertical mixing of water masses and dysoxic conditions) or Frutexites-bearing microbialites (low level of calcium carbonate supersaturation associated with anoxic conditions and deposition below a stable chemocline) formed. The results of this study point to continued environmental stress in the region during the Early Triassic that likely contributed to the uneven recovery from the Permian-Triassic mass extinction.

Fluid flow through the sedimentary cover in northern Switzerland recorded by calcite-celestite veins (Oftringen borehole, Olten)

Abundant veins filled by calcite, celestite and pyrite were found in the core of a 719 m deep borehole drilled in Oftringen near Olten, located in the north-western Molasse basin, close to the thrust of the Folded Jura. Host rocks are calcareous marl, argillaceous limestone and limestone of the Dogger and Malm. The delta O-18 values of vein calcite are lower than in host rock carbonate and, together with microthermometric data from fluid inclusions in vein calcite, indicate precipitation from a seawater-dominated fluid at average temperatures of 56-68A degrees C. Such temperatures were reached at the time of maximum burial of the sedimentary pile in the late Miocene. The depth profile of delta C-13 and Sr-87/Sr-86 values and Sr content of both whole-rock carbonate and vein calcite show marked trends towards negative delta C-13, high Sr-87/Sr-86, and low Sr content in the uppermost 50-150 m of the Jurassic profile (upper Oxfordian). The Sr-87/Sr-86 of vein minerals is generally higher than that of host rock carbonate, up to very high values corresponding to Burdigalian seawater (Upper Marine Molasse, Miocene), which represents the last marine incursion in the region. No evidence for internally derived radiogenic Sr (clay minerals) has been found and so an external source is required. S and O isotope composition of vein celestite and pyrite can be explained by bacterial reduction of Miocene seawater sulphate. The available data set suggests the vein mineralization precipitated from descending Burdigalian seawater and not from a fluid originating in the underlying Triassic evaporites.

Determination and Evaluation of Alternative Methods for Managing and Controlling Highway-Related Dust Phase II—Demonstration Project, June 2005

The State of Iowa currently has approximately 69,000 miles of unpaved secondary roads. Due to the low traffic count on these unpaved o nts as ng e two dust ed d roads, paving with asphalt or Portland cement concrete is not economical. Therefore to reduce dust production, the use of dust suppressants has been utilized for decades. This study was conducted to evaluate the effectiveness of several widely used dust suppressants through quantitative field testing on two of Iowa’s most widely used secondary road surface treatments: crushed limestone rock and alluvial sand/gravel. These commercially available dust suppressants included: lignin sulfonate, calcium chloride, and soybean oil soapstock. These suppressants were applied to 1000 ft test sections on four unpaved roads in Story County, Iowa. Tduplicate field conditions, the suppressants were applied as a surface spray once in early June and again in late August or early September. The four unpaved roads included two with crushed limestone rock and two with alluvial sand/gravel surface treatmewell as high and low traffic counts. The effectiveness of the dust suppressants was evaluated by comparing the dust produced on treated and untreated test sections. Dust collection was scheduled for 1, 2, 4, 6, and 8 weeks after each application, for a total testiperiod of 16 weeks. Results of a cost analysis between annual dust suppressant application and biennial aggregate replacement indicated that the cost of the dust suppressant, its transportation, and application were relatively high when compared to that of thaggregate types. Therefore, the biennial aggregate replacement is considered more economical than annual dust suppressant application, although the application of annual dust suppressant reduced the cost of road maintenance by 75 %. Results of thecollection indicated that the lignin sulfonate suppressant outperformed calcium chloride and soybean oil soapstock on all four unpavroads, the effect of the suppressants on the alluvial sand/gravel surface treatment was less than that on the crushed limestone rock, the residual effects of all the products seem reasonably well after blading, and the combination of alluvial sand/gravel surface treatment anhigh traffic count caused dust reduction to decrease dramatically.

Méthodes sismiques actives adaptées à l'étude de milieux hétérogènes : application aux glissements de terrain

Résumé Les glissements de terrain représentent un des principaux risques naturels dans les régions montagneuses. En Suisse, chaque année les glissements de terrains causent des dégâts qui affectent les infrastructures et ont des coûts financiers importants. Une bonne compréhension des mécanismes des glissements peut permettre d'atténuer leur impact. Celle-ci passe notamment par la connaissance de la structure interne du glissement, la détermination de son volume et de son ou ses plans de glissement. Dans un glissement de terrain, la désorganisation et la présence de fractures dans le matériel déplacé engendre un changement des paramètres physiques et en particulier une diminution des vitesses de propagation des ondes sismiques ainsi que de la densité du matériel. Les méthodes sismiques sont de ce fait bien adaptées à l'étude des glissements de terrain. Parmi les méthodes sismiques, l'analyse de la dispersion des ondes de surface est une méthode simple à mettre en oeuvre. Elle présente l'avantage d'estimer les variations des vitesses de cisaillement avec la profondeur sans avoir spécifiquement recours à l'utilisation d'une source d'onde S et de géophones horizontaux. Sa mise en oeuvre en trois étapes implique la mesure de la dispersion des ondes de surface sur des réseaux étendus, la détermination des courbes de dispersion pour finir par l'inversion de ces courbes. Les modèles de vitesse obtenus à partir de cette procédure ne sont valides que lorsque les milieux explorés ne présentent pas de variations latérales. En pratique cette hypothèse est rarement vérifiée, notamment pour un glissement de terrain dans lequel les couches remaniées sont susceptibles de présenter de fortes hétérogénéités latérales. Pour évaluer la possibilité de déterminer des courbes de dispersion à partir de réseaux de faible extension des mesures testes ont été effectuées sur un site (Arnex, VD) équipé d'un forage. Un profil sismique de 190 m de long a été implanté dans une vallée creusée dans du calcaire et remplie par des dépôts glacio-lacustres d'une trentaine de mètres d'épaisseur. Les données acquises le long de ce profil ont confirmé que la présence de variations latérales sous le réseau de géophones affecte l'allure des courbes de dispersion jusqu'à parfois empêcher leur détermination. Pour utiliser l'analyse de la dispersion des ondes de surface sur des sites présentant des variations latérales, notre approche consiste à déterminer les courbes de dispersions pour une série de réseaux de faible extension, à inverser chacune des courbes et à interpoler les différents modèles de vitesse obtenus. Le choix de la position ainsi que de l'extension des différents réseaux de géophones est important. Il tient compte de la localisation des hétérogénéités détectées à partir de l'analyse de sismique réfraction, mais également d'anomalies d'amplitudes observées sur des cartes qui représentent dans le domaine position de tir - position du récepteur, l'amplitude mesurée pour différentes fréquences. La procédure proposée par Lin et Lin (2007) s'est avérée être une méthode efficace permettant de déterminer des courbes de dispersion à partir de réseaux de faible extension. Elle consiste à construire à partir d'un réseau de géophones et de plusieurs positions de tir un enregistrement temps-déports qui tient compte d'une large gamme de distances source-récepteur. Au moment d'assembler les différentes données une correction de phase est appliquée pour tenir compte des hétérogénéités situées entre les différents points de tir. Pour évaluer cette correction nous suggérons de calculer pour deux tir successif la densité spectrale croisée des traces de même offset: Sur le site d'Arnex, 22 courbes de dispersions ont été déterminées pour de réseaux de géophones de 10 m d'extension. Nous avons également profité du forage pour acquérir un profil de sismique verticale en ondes S. Le modèle de vitesse S déduit de l'interprétation du profil de sismique verticale est utilisé comme information à priori lors l'inversion des différentes courbes de dispersion. Finalement, le modèle en deux dimension qui a été établi grâce à l'analyse de la dispersion des ondes de surface met en évidence une structure tabulaire à trois couches dont les limites coïncident bien avec les limites lithologiques observées dans le forage. Dans celui-ci des argiles limoneuses associées à une vitesse de propagation des ondes S de l'ordre de 175 m/s surmontent vers 9 m de profondeur des dépôts de moraine argilo-sableuse caractérisés par des vitesses de propagation des ondes S de l'ordre de 300 m/s jusqu'à 14 m de profondeur et supérieur ou égal à 400 m/s entre 14 et 20 m de profondeur. Le glissement de la Grande Combe (Ballaigues, VD) se produit à l'intérieur du remplissage quaternaire d'une combe creusée dans des calcaires Portlandien. Comme dans le cas du site d'Arnex les dépôts quaternaires correspondent à des dépôts glacio-lacustres. Dans la partie supérieure la surface de glissement a été localisée à une vingtaine de mètres de profondeur au niveau de l'interface qui sépare des dépôts de moraine jurassienne et des dépôts glacio-lacustres. Au pied du glissement 14 courbes de dispersions ont été déterminées sur des réseaux de 10 m d'extension le long d'un profil de 144 m. Les courbes obtenues sont discontinues et définies pour un domaine de fréquence de 7 à 35 Hz. Grâce à l'utilisation de distances source-récepteur entre 8 et 72 m, 2 à 4 modes de propagation ont été identifiés pour chacune des courbes. Lors de l'inversion des courbes de dispersion la prise en compte des différents modes de propagation a permis d'étendre la profondeur d'investigation jusqu'à une vingtaine de mètres de profondeur. Le modèle en deux dimensions permet de distinguer 4 couches (Vs1 < 175 m/s, 175 m/s < Vs2 < 225 m/s, 225 m/s < Vs3 < 400 m/s et Vs4 >.400 m/s) qui présentent des variations d'épaisseur. Des profils de sismiques réflexion en ondes S acquis avec une source construite dans le cadre de ce travail, complètent et corroborent le modèle établi à partir de l'analyse de la dispersion des ondes de surface. Un réflecteur localisé entre 5 et 10 m de profondeur et associé à une vitesse de sommation de 180 m/s souligne notamment la géométrie de l'interface qui sépare la deuxième de la troisième couche du modèle établi à partir de l'analyse de la dispersion des ondes de surface. Abstract Landslides are one of the main natural hazards in mountainous regions. In Switzerland, landslides cause damages every year that impact infrastructures and have important financial costs. In depth understanding of sliding mechanisms may help limiting their impact. In particular, this can be achieved through a better knowledge of the internal structure of the landslide, the determination of its volume and its sliding surface or surfaces In a landslide, the disorganization and the presence of fractures in the displaced material generate a change of the physical parameters and in particular a decrease of the seismic velocities and of the material density. Therefoe, seismic methods are well adapted to the study of landslides. Among seismic methods, surface-wave dispersion analysis is a easy to implement. Through it, shearwave velocity variations with depth can be estimated without having to resort to an S-wave source and to horizontal geophones. Its 3-step implementation implies measurement of surface-wave dispersion with long arrays, determination of the dispersion curves and finally inversion of these curves. Velocity models obtained through this approach are only valid when the investigated medium does not include lateral variations. In practice, this assumption is seldom correct, in particular for landslides in which reshaped layers likely include strong lateral heterogeneities. To assess the possibility of determining dispersion curves from short array lengths we carried out tests measurements on a site (Arnex, VD) that includes a borehole. A 190 m long seismic profile was acquired in a valley carved into limestone and filled with 30 m of glacio-lacustrine sediments. The data acquired along this profile confirmed that the presence of lateral variations under the geophone array influences the dispersion-curve shape so much that it sometimes preventes the dispersion curves determination. Our approach to use the analysis of surface-wave dispersion on sites that include lateral variations consists in obtaining dispersion curves for a series of short length arrays; inverting each so obtained curve and interpolating the different obtained velocity model. The choice of the location as well as the geophone array length is important. It takes into account the location of the heterogeneities that are revealed by the seismic refraction interpretation of the data but also, the location of signal amplitude anomalies observed on maps that represent, for a given frequency, the measured amplitude in the shot position - receiver position domain. The procedure proposed by Lin and Lin (2007) turned out to be an efficient one to determine dispersion curves using short extension arrays. It consists in building a time-offset from an array of geophones with a wide offset range by gathering seismograms acquired with different source-to-receiver offsets. When assembling the different data, a phase correction is applied in order to reduce static phase error induced by lateral variation. To evaluate this correction, we suggest to calculate, for two successive shots, the cross power spectral density of common offset traces. On the Arnex site, 22 curves were determined with 10m in length geophone-arrays. We also took advantage of the borehole to acquire a S-wave vertical seismic profile. The S-wave velocity depth model derived from the vertical seismic profile interpretation is used as prior information in the inversion of the dispersion-curves. Finally a 2D velocity model was established from the analysis of the different dispersion curves. It reveals a 3-layer structure in good agreement with the observed lithologies in the borehole. In it a clay layer with a shear-wave of 175 m/s shear-wave velocity overlies a clayey-sandy till layer at 9 m depth that is characterized down to 14 m by a 300 m/s S-wave velocity; these deposits have a S-wave velocity of 400 m/s between depths of 14 to 20 m. The La Grand Combe landslide (Ballaigues, VD) occurs inside the Quaternary filling of a valley carved into Portlandien limestone. As at the Arnex site, the Quaternary deposits correspond to glaciolacustrine sediments. In the upper part of the landslide, the sliding surface is located at a depth of about 20 m that coincides with the discontinuity between Jurassian till and glacio-lacustrine deposits. At the toe of the landslide, we defined 14 dispersion curves along a 144 m long profile using 10 m long geophone arrays. The obtained curves are discontinuous and defined within a frequency range of 7 to 35 Hz. The use of a wide range of offsets (from 8 to 72 m) enabled us to determine 2 to 4 mode of propagation for each dispersion curve. Taking these higher modes into consideration for dispersion curve inversion allowed us to reach an investigation depth of about 20 m. A four layer 2D model was derived (Vs1< 175 m/s, 175 m/s <Vs2< 225 m/s, 225 m/s < Vs3 < 400 m/s, Vs4> 400 m/s) with variable layer thicknesses. S-wave seismic reflection profiles acquired with a source built as part of this work complete and the velocity model revealed by surface-wave analysis. In particular, reflector at a depth of 5 to 10 m associated with a 180 m/s stacking velocity image the geometry of the discontinuity between the second and third layer of the model derived from the surface-wave dispersion analysis.