Wood and fiber properties of Norway spruce and its suitability for thermomechanical pulping.

In the first part of the study, the selected wood and fiber properties were investigated in terms of their occurrence and variation in wood, as well as their relevance from the perspective of thermomechanical pulping process and related end-products. It was concluded that the most important factors were the fiber dimensions, juvenile wood content, and in some cases, the content of heartwood being associated with extremely dry wood with low permeability in spruce. With respect to the above properties, the following three pulpwood assortments of which pulping potential was assumed to vary were formed: wood from regeneration cuttings, first-thinnings wood, and sawmill chips. In the experimental part of the study the average wood and fiber characteristics and their variation were determined for each raw material group prior to pulping. Subsequently, each assortment - equaling about 1500 m3 roundwood - was pulped separately for a 24 h period, at constant process conditions. The properties of obtained newsgrade thermomechanical pulps were then determined. Thermomechanical pulping (TMP) from sawmill chips had the highest proportion of long fibers, smallest proportion of fines, and had generally the coarsest and longest fibers. TMP from first-thinnings wood was just the opposite, whereas that from regeneration cuttings fell in between the above two extremes. High proportion of dry heartwood in wood originating from regeneration cuttings produced a slightly elevated shives content. However, no differences were found in pulp specific energy consumption. The obtained pulp tear index was clearly best in TMP made from sawmill chips and poorest in pulp from first-thinnings wood, which had generally inferior strength properties. No dramatical differences in any of the strength properties were found between pulp from sawmill residual wood and regeneration cuttings. Pulp optical properties were superior in TMP from first-thinnings. Unexpectedly, no noticeable differences, which could be explained with fiber morphology, were found in sheet density, bulk, air permeance or roughness between the three pulps. The most important wood quality factors in this study were the fiber length, fiber cross-sectional dimensions and percentage juvenile wood. Differences found in the quality of TMP manufactured from the above spruce assortments suggest that they could be segregated and pulped separately to obtain specific product characteristics, i.e., for instance tailor-made end-products, and to minimize unnecessary variation in the raw material quality, and hence, pulp quality.

Eläkejärjestelmät ja maahanmuutto : poliittisen taloustieteen lähestymistapa

Tässä työssä kysymystä kouluttamattoman maahanmuuton mahdollisesta vaikutuksesta eläkkeiden rahoitettavuuteen ja sitä kautta maahanmuuttopolitiikkaan lähestytään poliittisen taloustieteen näkökulmasta. Tarkastellaan siis sitä, mitkä ikä- ja tuloryhmät hyötyvät kouluttamattomasta maahanmuutosta sen mahdollisesti helpottaessa eläkkeiden maksua ja mitkä eivät ja millaiseen poliittiseen tasapainoon tämä johtaa. Äänestettäessä maahanmuuttopolitiikasta yksilö perustaisi mielipiteensä maahanmuuttopolitiikan liberalisoinnista tai tiukentamisesta siihen, miten maahanmuutto vaikuttaisi hänen omaan etuunsa. Maan väestö jaetaan eläkeläisiin sekä koulutettuihin ja kouluttamattomiin työntekijöihin ja tarkastellaan miten maahanmuutto vaikuttaa näiden ryhmien taloudelliseen hyötyyn. Aluksi tarkastellaan lyhyesti millaisia malleja maahanmuutosta ja eläkejärjestelmän olemassaolon vaikutuksista siihen suhtautumiseen on olemassa. Ensimmäisen johdantoluvun jälkeen käsitellään sitä, miten äänestystulos maahanmuuttopolitiikasta muuttuu mallin oletusten muuttuessa. Työssä tarkastellaan Razinin ja Sadkan (1999) hyvin yksinkertaista mallia, joka sisältää yksinkertaisuutensa takia joitain hyvin rajoittavia oletuksia. Sitten käydään läpi Kriegerin (2004) sekä Razinin ja Sadkan (2000) tekemiä laajennuksia, joissa osasta rajoittavia oletuksia luovutaan ja katsotaan millaisiin muutoksiin tämä johtaa. Työssä tarkastellaan myös Kriegerin (2003) mallia äänestystuloksesta neljässä erilaisessa eläkejärjestelmässä. Tamuran (2006) mallia tarkastellaan näkökulman laajentamiseksi edelleen. Tarkastelun kohteena ei enää ole vain eläkejärjestelmä, vaan myös tulonsiirrot matalapalkka-alojen työntekijöille. Työssä tarkasteltujen artikkeleiden pohjalta näyttää siltä, että erilaisissa eläkejärjestelmissä ja erilaisissa talouksissa elävät yksilöt suhtautuvat maahanmuuttoon eri tavoin sen mukaan, minkä verran he saavat hyötyä siitä. Hyödyn määrään vaikuttavat myös maahanmuuttajien ominaisuudet ja eläkejärjestelmän ominaisuudet, varsinkin se, onko eläkemaksu vai eläke-etuus vakio. Koska maahanmuutto vaikuttaa talouden eri ryhmiin eli kouluttamattomiin ja koulutettuihin työntekijöihin sekä eläkeläisiin eri tavoin, useimmiten yksimielisyyttä maahanmuuttopolitiikasta ei synny.

Effect of water vapour stabilization of raw materials on the quality of the inhalation product

Generation of raw materials for dry powder inhalers by different size reduction methods can be expected to influence physical and chemical properties of the powders. This can cause differences in particle size, size distribution, shape, crystalline properties, surface texture and energy. These physical properties of powders influence the behaviour of particles before and after inhalation. Materials with an amorphous surface have different surface energy compared to materials with crystalline surface. This can affect the adhesion and cohesion of particles. Changes in the surface nature of the drug particles results in a change in product performance. By stabilization of the raw materials the amorphous surfaces are converted into crystalline surfaces. The primary aim of the study was to investigate the influence of the surface properties of the inhalation particles on the quality of the product. The quality of the inhalation product is evaluated by measuring the fine particle dose (FPD). FDP is the total dose of particles with aerodynamic diameters smaller than 5,0 μm. The secondary aim of this study was to achieve the target level of the FPD and the stability of the FPD. This study was also used to evaluate the importance of the stabilization of the inhalation powders. The study included manufacturing and analysing drug substance 200 μg/dose inhalation powder batches using non-stabilized or stabilized raw materials. The inhaler formulation consisted of micronized drug substance, lactose <100μm and micronized lactose <10μm. The inhaler device was Easyhaler®. Stabilization of the raw materials was done in different relative humidity, temperature and time. Surface properties of the raw materials were studied by dynamic vapour sorption, scanning electron microscopy and three-point nitrogen adsorption technique. Particle size was studied by laser diffraction particle size analyzer. Aerodynamic particle size distribution from inhalers was measured by new generation impactor. Stabilization of all three raw materials was successful. A clear difference between nonstabilized and stabilized raw materials was achieved for drug substance and lactose <10μm. However for lactose <100μm the difference wasn’t as clear as wanted. The surface of the non-stabilized drug substance was more irregular and the particles had more roughness on the surface compared to the stabilized drug substances particles surface. The surface of the stabilized drug particles was more regular and smoother than non-stabilized. Even though a good difference between stabilized and non-stabilized raw materials was achieved, a clear evidence of the effect of the surface properties of the inhalation particles on the quality of the product was not observed. Stabilization of the raw materials didn’t lead to a higher FPD. Possible explanations for the unexpected result might be too rough conditions in the stabilization of the drug substance or smaller than wanted difference in the degree of stabilization of the main component of the product <100μm. Despite positive effects on the quality of the product were not seen there appears to be some evidence that stabilized drug substance results in smaller particle size of dry powder inhalers.

Nanoscale studies of materials using x-ray synchrotron radiation and mesoscopic modelling

X-ray synchrotron radiation was used to study the nanostructure of cellulose in Norway spruce stem wood and powders of cobalt nanoparticles in cellulose support. Furthermore, the growth of metallic clusters was modelled and simulated in the mesoscopic size scale. Norway spruce was characterized with x-ray microanalysis at beamline ID18F of the European Synchrotron Radiation Facility in Grenoble. The average dimensions and the orientation of cellulose crystallites was determined using x-ray microdiffraction. In addition, the nutrient element content was determined using x-ray fluorescence spectroscopy. Diffraction patterns and fluorescence spectra were simultaneously acquired. Cobalt nanoparticles in cellulose support were characterized with x-ray absorption spectroscopy at beamline X1 of the Deutsches Elektronen-Synchrotron in Hamburg, complemented by home lab experiments including x-ray diffraction, electron microscopy and measurement of magnetic properties with a vibrating sample magnetometer. Extended x-ray absorption fine structure spectroscopy (EXAFS) and x-ray diffraction were used to solve the atomic arrangement of the cobalt nanoparticles. Scanning- and transmission electron microscopy were used to image the surfaces of the cellulose fibrils, where the growth of nanoparticles takes place. The EXAFS experiment was complemented by computational coordination number calculations on ideal spherical nanocrystals. The growth process of metallic nanoclusters on cellulose matrix is assumed to be rather complicated, affected not only by the properties of the clusters themselves, but essentially depending on the cluster-fiber interfaces as well as the morphology of the fiber surfaces. The final favored average size for nanoclusters, if such exists, is most probably a consequence of these two competing tendencies towards size selection, one governed by pore sizes, the other by the cluster properties. In this thesis, a mesoscopic model for the growth of metallic nanoclusters on porous cellulose fiber (or inorganic) surfaces is developed. The first step in modelling was to evaluate the special case of how the growth proceeds on flat or wedged surfaces.

Berry phenolics: isolation, analysis, identification, and antioxidant properties

The main objectives in this thesis were to isolate and identify the phenolic compounds in wild (Sorbus aucuparia) and cultivated rowanberries, European cranberries (Vaccinium microcarpon), lingonberries (Vaccinium vitis-idaea), and cloudberries (Rubus chamaemorus), as well as to investigate the antioxidant activity of phenolics occurring in berries in food oxidation models. In addition, the storage stability of cloudberry ellagitannin isolate was studied. In wild and cultivated rowanberries, the main phenolic compounds were chlorogenic acids and neochlorogenic acids with increasing anthocyanin content depending on the crossing partners. The proanthocyanidin contents of cranberries and lingonberries were investigated, revealing that the lingonberry contained more rare A-type dimers than the European cranberry. The liquid chromatography mass spectrometry (LC-MS) analysis of cloudberry ellagitannins showed that trimeric lambertianin C and sanguiin H-10 were the main ellagitannins. The berries, rich in different types of phenolic compounds including hydroxycinnamic acids, proanthocyanidins, and ellagitannins, showed antioxidant activity toward lipid oxidation in liposome and emulsion oxidation models. All the different rowanberry cultivars prevented lipid oxidation in the same way, in spite of the differences in their phenolic composition. In terms of liposomes, rowanberries were slightly more effective antioxidants than cranberry and lingonberry phenolics. Greater differences were found when comparing proanthocyanidin fractions. Proanthocyanidin dimers and trimers of both cranberries and lingonberries were most potent in inhibiting lipid oxidation. Antioxidant activities and antiradical capacities were also studied with hydroxycinnamic acid glycosides. The sinapic acid derivatives of the hydroxycinnamic acid glycosides were the most effective at preventing lipid oxidation in emulsions and liposomes and scavenging radicals in DPPH assay. In liposomes and emulsions, the formation of the secondary oxidation product, hexanal, was inhibited more than that of the primary oxidation product, conjugated diene hydroperoxides, by hydroxycinnamic acid derivatives. This indicates that they are principally chain-breaking antioxidants rather than metal chelators, although they possess chelating activity as well. The storage stability test of cloudberry ellagitannins was performed by storing ellagitannin isolate and ellagitannins encapsulated with maltodextrin at different relative vapor pressures. The storage stability was enhanced by the encapsulation when higher molecular weight maltodextrin was used. The best preservation was achieved when the capsules were stored at 0 or 33% relative vapor pressures. In addition, the antioxidant activities of encapsulated cloudberry extracts were followed during the storage period. Different storage conditions did not alter the antioxidant activity, even though changes in the ellagitannin contents were seen. The current results may be of use in improving the oxidative stability of food products by using berries as natural antioxidants.

Helsingin Östersundomin pienvesien kartoitus

The area of Östersundom (29,1 square kilometers) was attached to Helsinki in the beginning of the year 2009. Östersundom is formed mostly from the municipality of Sipoo, and partly from the city of Vantaa. Nowadays Östersundom is still quite rural, but city planning has already started, and there are plans to develop Östersundom into a district with 45 000 inhabitants. In this study, the headwaters, streams and small lakes of Östersundom were studied to produce information as a basis for city planning. There are six main streams and five small lakes in Östersundom. The main methodology used in this study was the examination of the physical and the chemical quality of the water. The hygienic quality of the water was also studied. It was also examined whether the waters are in their natural state, or have they been treated and transformed by man. In addition, other factors affecting the waters were examined. Geographical information data was produced as a result of this work. Östersundom is the main area looked at in this study, some factors are examined in the scope of the catchment areas. Water samples were collected in three sampling periods: 31.8 4.9.2009, 3. 4.2.2010, and 10. 14.4.2010. There were 20 sampling points in Östersundom (5 in small lakes, 15 in streams). In the winter sampling period, only six samples were collected, from which one was taken from a small lake. Field measurements associated with water sampling included water temperature, oxygen concentration, pH and electoral conductivity. Water samples were analyzed in the Laboratories of Physical Geography in the University of Helsinki for the following properties: total suspended solids (TSS), total dissolved substances (TDS), organic matter, alkalinity, colour, principal anions and cations and trace elements. Metropolilab analyzed the amount of faecal coliform bacteria in the samples. The waters in Östersundom can be divided to three classes according to water quality and other characteristics: the upper course of the streams, the lower course of the streams and the small lakes. The streams in their upper course are in general acidic, and their acid neutralization capacity is low. The proportion of the organic matter is high. Also the concentrations of aluminium and iron tend to be high. The streams in the lower course have acidity closer to neutral, and the buffering capacity is good. The amounts of TSS and TDS are high, and as a result, the concentrations of many ions and trace elements are high as well. Bacteria were detected at times in the streams of the lower course. Four of the five small lakes in Östersundom are humic and acidic. TSS and TDS concentrations tend to be low, but the proportion of organic matter is often high. There were no bacteria in the small lakes. The fifth small lake (Landbonlampi) differs from the others by its water colour, which is very clear. This lake is very acidic, and its buffering capacity is extremely low. Compared to the headwaters in Finland in general, the concentrations of many ions and trace elements are higher in Östersundom. On the other hand, the characteristics of water were different according to the classification upper course streams, lower course streams, and small lakes. Generally, the best water quality was observed in the stream of Gumbölenpuro and in the lakes Storträsk, Genaträsk, Hältingträsk and Landbonlampi. Several valuable waters in their natural state were discovered from the area. The most representative example is the stream of Östersundominpuro in its lower course, where the stream flows through a broad-leaf forest area. The small lakes of Östersundom, and the biggest stream Krapuoja, with its meandering channel, are also valuable in their natural state.

Teknillistaloudellinen tutkimus vesisäiliöistä

Engineering economics study on water tanks and towers.

Maa- ja metsätalouden torjunta-aineiden käytöstä Suomessa ja tärkeimpien yhdisteryhmien vaikutuksista vesissä

The use of pesticides in agricultute and forestry in Finland and the effects of the most important groups in waters.

Towards Understanding Powder Behavior Via Simulation

The aim of this study was to investigate powder and tablet behavior at the level of mechanical interactions between single particles. Various aspects of powder packing, mixing, compression, and bond formation were examined with the aid of computer simulations. The packing and mixing simulations were based on spring forces interacting between particles. Packing and breakage simulations included systems in which permanent bonds were formed and broken between particles, based on their interaction strengths. During the process, a new simulation environment based on Newtonian mechanics and elementary interactions between the particles was created, and a new method for evaluating mixing was developed. Powder behavior is a complicated process, and many of its aspects are still unclear. Powders as a whole exhibit some aspects of solids and others of liquids. Therefore, their physics is far from clear. However, using relatively simple models based on particle-particle interaction, many powder properties could be replicated during this work. Simulated packing densities were similar to values reported in the literature. The method developed for describing powder mixing correlated well with previous methods. The new method can be applied to determine mixing in completely homogeneous materials, without dividing them into different components. As such, it can describe the efficiency of the mixing method, regardless of the powder's initial setup. The mixing efficiency at different vibrations was examined, and we found that certain combinations of amplitude, direction, and frequencies resulted in better mixing while using less energy. Simulations using exponential force potentials between particles were able to explain the elementary compression behavior of tablets, and create force distributions that were similar to the pressure distributions reported in the literature. Tablet-breaking simulations resulted in breaking strengths that were similar to measured tablet breaking strengths. In general, many aspects of powder behavior can be explained with mechanical interactions at the particle level, and single particle properties can be reliably linked to powder behavior with accurate simulations.

Onnellisten kylät : Vertaileva tapaustutkimus Kumpulan ja Sundsbergin asukkaiden subjektiivisesta hyvinvoinnista sekä onnellisuuden rakentumisesta

The aim of this masters thesis was to examine subjective wellbeing and personal happiness. Empirical study of happiness is part of broader wellbeing reseach and is based on an idea that the best experts of personal wellbeing are the individuals themselves. In addition to perceptions of personal happiness, the aim was also to acquire knowledge about personal values and components personal happiness is based on. In this study, moving into certain community and the charesteristics of neigbourhood contributing happiness, were defined to represent these values. The object was, through comparative casestudy, to obtain knowledge about subjective wellbeing of the inviduals in two different residental areas inside metropolitan area of Helsinki. In comparative case study the intention usually is that the examined units represent spesific "cases" from something broader and therefore the results can be somehow generalized. Consequently the chosen cases in this study were selected due to their image of "urban village" and thus the juxtapositioning was constructed between secluded post-suburban village and more heterogeneous urban village better attached to excisting urban structure. The researh questins were formed as follows: Are there any differencies between the areas regarding the components personal happines is based on? Are there any differencies between the areas regarding the level of residents subjective wellbeing? Based on the residents assesments, what are the most important charesteristics of neigbourhood contributing personal happiness? The data used in order to gain aswers to these questions was obtained from internet-based survey questionnaire. Based on the data residents of post-suburban village Sundsberg seem to share highly family oriented set of values and actualizing these values is ensured with high income, wealth and secure work situation. Insteadt in Kumpula the components of happiness seem place more towards learning and personal developement, interesting leisure and hobbies and specially having an influence regarding communal decisions. Conserning subjective wellbeing of residents there can be seen some differencies as well. Personal life is experienced a bit more happier in Sundsberg than in Kumpula. People are more satified with their personal health and job satisfaction in Sundsberg and additionally feelings of loneliness, inadequancy and frustration are bit more common in Kumpula. Regarding the charesteristics of neigbourhood contributing happiness data suggests that key charesteristics of area are peacefulness and safely, good location and connections and proximity of parks and recreational areas. These charesteristics were concidered highly significant in both areas but they were experienced to actualize better in Kumpula. In addition to these components the residents in Kumpula were overall more satisfied with various charecteristics contiburing happiness in their residental area. Besides these attributes mentioned above residents in Kumpula emphasize also some "softer" elements connecting into social, functional and communal side of area. From Sundsberg point of view residental area best contributing happiness is child friendly and safe community based on likeminded people who share the same sosioeconomical situation. The results of this study can be linked back into the society and metropolitan area, which they were chosen from as a cases to be studied. The results can thereby be seen as an example of differentation of conditions of personal happiness between certain population segments. It is possible to detect an spatial dimetion to this process as well and thereby the results suggests that regional segmentation affects between high-ranking residental areas as well. Thereby the results of this reseach contributes to the debate on innovative, diverse and dynamic urban area and as well cohesion of metropolitan area and the society in whole.

Mesoporous silica- and silicon-based materials as carriers for poorly water soluble drugs

New chemical entities with unfavorable water solubility properties are continuously emerging in drug discovery. Without pharmaceutical manipulations inefficient concentrations of these drugs in the systemic circulation are probable. Typically, in order to be absorbed from the gastrointestinal tract, the drug has to be dissolved. Several methods have been developed to improve the dissolution of poorly soluble drugs. In this study, the applicability of different types of mesoporous (pore diameters between 2 and 50 nm) silicon- and silica-based materials as pharmaceutical carriers for poorly water soluble drugs was evaluated. Thermally oxidized and carbonized mesoporous silicon materials, ordered mesoporous silicas MCM-41 and SBA-15, and non-treated mesoporous silicon and silica gel were assessed in the experiments. The characteristic properties of these materials are the narrow pore diameters and the large surface areas up to over 900 m²/g. Loading of poorly water soluble drugs into these pores restricts their crystallization, and thus, improves drug dissolution from the materials as compared to the bulk drug molecules. In addition, the wide surface area provides possibilities for interactions between the loaded substance and the carrier particle, allowing the stabilization of the system. Ibuprofen, indomethacin and furosemide were selected as poorly soluble model drugs in this study. Their solubilities are strongly pH-dependent and the poorest (< 100 µg/ml) at low pH values. The pharmaceutical performance of the studied materials was evaluated by several methods. In this work, drug loading was performed successfully using rotavapor and fluid bed equipment in a larger scale and in a more efficient manner than with the commonly used immersion methods. It was shown that several carrier particle properties, in particular the pore diameter, affect the loading efficiency (typically ~25-40 w-%) and the release rate of the drug from the mesoporous carriers. A wide pore diameter provided easier loading and faster release of the drug. The ordering and length of the pores also affected the efficiency of the drug diffusion. However, these properties can also compensate the effects of each other. The surface treatment of porous silicon was important in stabilizing the system, as the non-treated mesoporous silicon was easily oxidized at room temperature. Different surface chemical treatments changed the hydrophilicity of the porous silicon materials and also the potential interactions between the loaded drug and the particle, which further affected the drug release properties. In all of the studies, it was demonstrated that loading into mesoporous silicon and silica materials improved the dissolution of the poorly soluble drugs as compared to the corresponding bulk compounds (e.g. after 30 min ~2-7 times more drug was dissolved depending on the materials). The release profile of the loaded substances remained similar also after 3 months of storage at 30°C/56% RH. The thermally carbonized mesoporous silicon did not compromise the Caco-2 monolayer integrity in the permeation studies and improved drug permeability was observed. The loaded mesoporous silica materials were also successfully compressed into tablets without compromising their characteristic structural and drug releasing properties. The results of this research indicated that mesoporous silicon/silica-based materials are promising materials to improve the dissolution of poorly water soluble drugs. Their feasibility in pharmaceutical laboratory scale processes was also confirmed in this thesis.

Ksylitolilaatujen käyttö täyteaineena ja niiden puristuminen tabletiksi

Ksylitolilla on edulliset käyttöominaisuudet. Edullisista käyttöominaisuuksista huolimatta ksylitolin käyttö lääkevalmisteiden apuaineena on vähäistä. Viime vuosina lääketeollisuudessa on kuitenkin lisääntynyt kiinnostus ksylitoliin ja muihin sokerialkoholeihin. Kirjallisuudesta löytyy vain vähän tietoa ksylitolin puristuvuudesta ja sen soveltuvuudesta tablettien täyteaineeksi. Tässä työssä karakterisoitiin erilaisten ksylitolilaatujen ominaisuuksia ja niiden soveltuvuutta suorapuristuksella valmistettavien tablettien täyteaineeksi. Materiaaleina käytettiin kolmea rakeistettua ksylitolia ja kahta jauhemaista ksylitolia. Ksylitolilaaduista tutkittiin ominaisuudet, joilla on vaikutusta materiaalin puristumiseen. Tutkittavat ominaisuudet olivat kaato- ja tärytiheys, todellinen tiheys, partikkelikoko ja partikkelikokojakauma ja valuvuus. Kirjallisuuden perusteella ksylitoli on lievästi hygroskooppinen, joten tässä työssä tutkittiin myös ksylitolin hygroskooppisuus eri olosuhteissa. Työssä tutkittiin ksylitolin puristuvuutta yksin ja yhdessä huonosti puristuvan lääkeaineen, parasetamolin, kanssa. Eri ksylitolilaatujen puristumista tutkittiin eri-kokoisilla painimilla. Ksylitoli on hyvin soveltuva apuaine myös lapsille tarkoitettuihin lääkevalmisteisiin ja siten tutkittiin myös oliko ksylitolista mahdollista puristaa minitabletteja. Minitablettien käyttö tulevaisuudessa lasten annostelumuotona tulee todennäköisesti lisääntymään. Rakeistetut ksylitolilaadut puristuivat tämän tutkimuksen perusteella suhteellisen hyvin. Jauhemaiset ksylitolit puristuivat huonosti. Syynä näiden huonoon puristuvuuteen oli liian suuri partikkelikoko ja partikkelikokojakauma, joka esti partikkelien välisten sidosten muodostumista. Parasetamoli heikensi huomattavasti kaikkien ksylitolilaatujen puristuvuutta. Ksylitoli ei siis yksinään pysty kumoamaan parasetamolin huonoa puristuvuutta, vaan formulaatioon tarvittaisiin ksylitolin lisäksi jokin yleisesti tablettien suorapuristuksessa käytettävä täyteaine. Tämän tutkimuksen perusteella ksylitoli on hygroskooppinen, mutta vasta suhteellisen kosteuden ollessa hyvin korkea (95 %). Siten ksylitolin hygroskooppisuus ei ole haitaksi ajatellen ksylitolia sisältävien valmisteiden valmistusta tai säilytystä.

Polarization studies in electromagnetic scattering by small Solar-system particles

In remote-sensing studies, particles that are comparable to the wavelength exhibit characteristic features in electromagnetic scattering, especially in the degree of linear polarization. These features vary with the physical properties of the particles, such as shape, size, refractive index, and orientation. In the thesis, the direct problem of computing the unknown scattered quantities using the known properties of the particles and the incident radiation is solved at both optical and radar spectral regions in a unique way. The internal electromagnetic fields of wavelength-scale particles are analyzed by using both novel and established methods to show how the internal fields are related to the scattered fields in the far zone. This is achieved by using the tools and methods that were developed specifically to reveal the internal field structure of particles and to study the mechanisms that relate the structure to the scattering characteristics of those particles. It is shown that, for spherical particles, the internal field is a combination of a forward propagating wave with the apparent wavelength determined by the refractive index of the particle, and a standing wave pattern with the apparent wavelength the same as for the incident wave. Due to the surface curvature and dielectric nature of the particle, the incident wave front undergoes a phase shift, and the resulting internal wave is focused mostly at the forward part of the particle similar to an optical lens. This focusing is also seen for irregular particles. It is concluded that, for both spherical and nonspherical particles, the interference at the far field between the partial waves that originate from these concentrated areas in the particle interior, is responsible for the specific polarization features that are common for wavelength-scale particles, such as negative values and local extrema in the degree of linear polarization, asymmetry of the phase function, and enhancement of intensity near the backscattering direction. The papers presented in this thesis solve the direct problem for particles with both simple and irregular shapes to demonstrate that these interference mechanisms are common for all dielectric wavelength-scale particles. Furthermore, it is shown that these mechanisms can be applied to both regolith particles in the optical wavelengths and hydrometeors at microwave frequencies. An advantage from this kind of study is that it does not matter whether the observation is active (e.g., polarimetric radar) or passive (e.g., optical telescope). In both cases, the internal field is computed for two mutually perpendicular incident polarizations, so that the polarization characteristics can then be analyzed according to the relation between these fields and the scattered far field.