Field trials on culture of Clarias batrachus

Culture of Magur, Clarias batrachus on an experimental basis was carried out for a total of 159 days in 6 earthen ponds each of 0.02 ha in area, singly in 2 ponds and in combination with Rohu, Labeo rohita in 4 ponds. Three different artificial feeds were used. Growth of Magur varied from 89 to 110 and survival form 93 to 100%. Out of the 3 feeds used, feed formulation 2 yielded better results. Length-weight relationship parameters were found as log W=0.4979067+1.878346 log L; -1.1116438+2.3511497 log L; and -1.238157+2.433125 log L indicating growth to be not isometric. Relative condition factor (K u) was close to or higher than 1.0 only in fishes higher than 200 mm of total length; K. values which were less than 1.0 up to January, reached values greater than 1.0 by March-April. Condition appears to be influenced by spawning rather than feeding.

Substitution of Artemia with Brachionus in different ratios during larval rearing of Macrobrachium rosenbergii and evaluation of their feed efficacy

Larval growth during stage I-VIII was studied in Macrobrachium rosenbergii. Duration in moult periodicity were recorded-during larval development period, larvae were fed with Brachionus (grown on Baker's yeast and also Brachinous raised through organic manuring in outdoor culture containers). The performance of the feed was evaluated through substitution of Brachionus in the feeding protocol, in lieu of Artemia 1st instar. The Artemia, Brachionus substitution ratio of 75:25 was found to be most efficient. The study also indicates that the comparative growth rate of Brachionus plicatilis is higher in manure loaded tanks than with Baker's yeast. Growth rate "Y'' in culture tank being 0.245 and 0.112 and corresponding duplicating time (Td) too was found to be 2.855 and 6.365 respectively in tanks manured/enriched with pig manure.

Length-weight relationship in the Asian seabass, Lates calcarifer (Bloch) under culture condition

Asian seabass, Lates calcarifer (Bloch) - a catadromous centropomid perch, is a good candidate species for brackishwater aquaculture in India. The length-weight relationship and the relative condition of L. calcarifer were assessed under culture condition. The length of the fish samples ranged from 25 to 240 mm and the relative condition (w sub(r)) of the fish for different length groups ranged from 99.54 to 104.39, indicating the good condition of the fish. The regression analysis of log-transformed length-weight data was carried out and the 'b' coefficient indicates the good condition of fish showing an isometric growth in the juvenile phase under culture condition.

Length-weight relationship and relative condition factor in Oreochromis mossambicus (Peters) of Bhima River

Oreochromis mossambicus (Peters), a common freshwater fish of Bhima river, has high economic value and considerable fishery importance. The length-weight relationship in the logarithmic way for this fish can be written as: Log W = - 4.50241627 + 2.884822741 log L. This is close to the cubic law indicating the isometric growth of the fish in its natural habitat. The correlation coefficient (r) was found to be 0.9865 which showed a good relationship between the two parameters. The mean relative condition factor (K sub(n)) was 1.00 suggesting the well-being of the fish.

Length-weight relationship in freshwater cat fish Clarias batrachus (Linn.)

Clarias batrachus (Linn.), a common freshwater cat fish of Bhima River, has high economic value and considerable fishery importance. The length-weight relationship in the logarithmic way for this fish can be written as: Log W = 4.503717819 + 2.70681765 Log L. This is close to the cubic law indicating the isometric growth of the fish in its natural habitat. The correlation coefficient (r) was found to be 0.9824 which showed a good relationship between the two parameters.

Effect of different sex ratios of ablated wild-stock Penaeus monodon Fabricius on maturation, fecundity and hatching rates

The study was conducted to determine other sex ratios of ablated wild-stock Penaeus monodon other than the most commonly practiced 1 male: 1 female. Four different sex ratios, 0:1, 1:1, 1:2, and 1:4 male: female were tested in four 4m diameter circular tanks for a period of 55 days. During the first run the 1 male: 2 females ratio gave: (a) the highest percentage of first (42.20%), second (30.00%) and third (33.33%) spawning; and (b) the highest total and average fecundity (3.9 million eggs and 300,692 eggs, respectively). The 1 male: 2 females ratio is recommended on the basis of highest percentage for the first, second and third spawners, total and average fecundity.

Development of a fishing log for use in trawlers

The paper describes the technical and operational features of a composite equipment for simultaneous measurement of five important parameters, warp load, boat speed, water temperature, water salinity and air temperature pertaining to the craft, gear and the environment. The equipment is designed for continuous measurement in small and medium crafts easily without disturbance to routine fishing operations. The system operated on 9V supply, is suitable for portable operations from one vessel to another. The compact electronic meter kept in the wheel-house displays the data one by one in engineering units.

Length-weight relationship in Nandus nandus (Hamilton) (Perciformes-Teleostei)

Length-weight relationship of the freshwater fish of Pamba River, Nandus nandus (Ham) has been worked out. The results showed that the slope values and elevations were not significant and hence a combined regression equation has been calculated for both the sexes (Log W=2.4130 Log L -0.3306). The’t’ test analyses were conducted and found that the growth departs significantly from the isometric growth. Thus the formula W=aL super(n) has to be applied in calculating the length-weight relationship of this species.

Strengthening the log book recording system for fishing vessels: Sri Lanka

Activities of the project included: preparation of awareness materials on data reporting; organizing stakeholder awareness programmes; setting and maintaining an electronic database; inputs from participants and recommendations

Physicians in leadership: the association between medical director involvement and staff-to-patient ratios

In a hospital environment that demands a careful balance between commercial and clinical interests, the extent to which physicians are involved in hospital leadership varies greatly. This paper assesses the influence of the extent of this involvement on staff-to-patient ratios. Using data gathered from 604 hospitals across Germany, this study evidences the positive relationship between a full-time medical director (MD) or heavily involved part-time MD and a higher staff-to-patient ratio. The data allows us to control for a range of confounding variables, such as size, rural/urban location, ownership structure, and case-mix. The results contribute to the sparse body of empirical research on the effect of clinical leadership on organizational outcomes.

Study by Hall probe mapping of the trapped flux modification produced by local heating in YBCO HTS bulks for different surface/volume ratios

The aim of this report is to compare the trapped field distribution under a local heating created at the sample edge for different sample morphologies. Hall probe mappings of the magnetic induction trapped in YBCO bulk samples maintained out of thermal equilibrium were performed on YBCO bulk single domains, YBCO single domains with regularly spaced hole arrays, and YBCO superconducting foams. The capability of heat draining was quantified by two criteria: the average induction decay and the size of the thermally affected zone caused by a local heating of the sample. Among the three investigated sample shapes, the drilled single domain displays a trapped induction which is weakly affected by the local heating while displaying a high trapped field. Finally, a simple numerical modelling of the heat flux spreading into a drilled sample is used to suggest some design rules about the hole configuration and their size. © 2005 IOP Publishing Ltd.

Transducer and base compliance alter the in situ 6 dof force measured from muscle during an isometric contraction in a multi-joint limb.

Although musculoskeletal models are commonly used, validating the muscle actions predicted by such models is often difficult. In situ isometric measurements are a possible solution. The base of the skeleton is immobilized and the endpoint of the limb is rigidly attached to a 6-axis force transducer. Individual muscles are stimulated and the resulting forces and moments recorded. Such analyses generally assume idealized conditions. In this study we have developed an analysis taking into account the compliances due to imperfect fixation of the skeleton, imperfect attachment of the force transducer, and extra degrees of freedom (dof) in the joints that sometimes become necessary in fixed end contractions. We use simulations of the rat hindlimb to illustrate the consequences of such compliances. We show that when the limb is overconstrained, i.e., when there are fewer dof within the limb than are restrained by the skeletal fixation, the compliances of the skeletal fixation and of the transducer attachment can significantly affect measured forces and moments. When the limb dofs and restrained dofs are matched, however, the measured forces and moments are independent of these compliances. We also show that this framework can be used to model limb dofs, so that rather than simply omitting dofs in which a limb does not move (e.g., abduction at the knee), the limited motion of the limb in these dofs can be more realistically modeled as a very low compliance. Finally, we discuss the practical implications of these results to experimental measurements of muscle actions.

Statistics of reaction progress variable and mixture fraction gradients from DNS of turbulent partially premixed flames

Statistically planar turbulent partially premixed flames for different initial intensities of decaying turbulence have been simulated for global equivalence ratios = 0.7 and 1.0 using three-dimensional, simplified chemistry-based direct numerical simulations (DNS). The simulation parameters are chosen such that the flames represent the thin reaction zones regime combustion. A random bimodal distribution of equivalence ratio is introduced in the unburned gas ahead of the flame to account for the mixture inhomogeneity. The results suggest that the probability density functions (PDFs) of the mixture fraction gradient magnitude |Δξ| (i.e., P(|Δξ|)) can be reasonably approximated using a log-normal distribution. However, this presumed PDF distribution captures only the qualitative nature of the PDF of the reaction progress variable gradient magnitude |Δc| (i.e., P(|Δc|)). It has been found that a bivariate log-normal distribution does not sufficiently capture the quantitative behavior of the joint PDF of |Δξ| and |Δc| (i.e., P(|Δξ|, |Δc|)), and the agreement with the DNS data has been found to be poor in certain regions of the flame brush, particularly toward the burned gas side of the flame brush. Moreover, the variables |Δξ| and |Δc| show appreciable correlation toward the burned gas side of the flame brush. These findings are corroborated further using a DNS data of a lifted jet flame to study the flame geometry dependence of these statistics. © 2013 Copyright Taylor and Francis Group, LLC.