Efficiency analysis of flat plate collectors for building facade integration

A theoretical approach has been used to evaluate the performance of facade integrated solar collectors based on the physical collector parameters such as absorber plate absorptance, transmittance of the glazed cover plate and insulation thickness. A 1D steady state model, based on the Hottel Whillier Bliss equation, was employed to determine the effect of changing parameters to meet façade integration criteria.

Economic Stability and Economic Governance in the Euro Area:What the European Crisis Can Teach on the Limits of Economic Integration

The recent European economic crisis has dramatically exposed the failures of
the various institutional mechanisms in place to maintain economic stability
in Europe, and has unveiled the difficulty in achieving international coordination
on fiscal and financial stability policies. Drawing on the European
experience, this article analyzes the concept of economic stability in international
law and highlights the peculiar problems connected to its maintenance
or promotion. First, we demonstrate that policies that safeguard and
protect economic stability are largely regulated and managed at the national
level, due to their inextricable relationship with the exercise of national political
power. Until recently, more limited levels of pan-European integration
did not make the coordination of economic stability policies seem necessary.
However, a much deeper level of economic integration makes it very difficult
to tackle an international economic crisis through national responses. If EU
Member states wish to maintain and deepen economic integration, they
must accept an erosion of sovereignty over their economic stability policies.
This will not only deprive states of a fundamental anchor of political power,
but also create a challenge for the maintenance of democratic control over
economic policies. Second, this article argues that soft law approaches are
likely ineffective in enforcing the regulatory disciplines required to ensure
economic stability.

Integration of numerical models in geographic databases: the case of Sado estuary management

Geographic information systems (GIS) are now widely applied in coastal resource management. Their ability to organise and interface information from a large range of public and private data sources, and their ability to combine this information, using management criteria, to develop a comprehensive picture of the system explains the success of GIS in this area. The use of numerical models as a tool to improve coastal management is also widespread. Less usual is a GIS-based management to ol implementing a comprehensive management model and integrating a numerical modelling system into itself. In this paper such a methodology is proposed. A GIS-based management tool based on the DPSIR model is presented. An overview of the MOHID numerical modelling system is given and the method of integrating this model in the management tool is described. This system is applied to the Sado Estuary (Portugal). Some preliminary results of the integration are presented, demonstrating the capabilities of the management system.

Virtual power producers integration into MASCEM

All over the world Distributed Generation is seen as a valuable help to get cleaner and more efficient electricity. Under this context distributed generators, owned by different decentralized players can provide a significant amount of the electricity generation. To get negotiation power and advantages of scale economy, these players can be aggregated giving place to a new concept: the Virtual Power Producer. Virtual Power Producers are multi-technology and multi-site heterogeneous entities. Virtual Power Producers should adopt organization and management methodologies so that they can make Distributed Generation a really profitable activity, able to participate in the market. In this paper we address the integration of Virtual Power Producers into an electricity market simulator –MASCEM – as a coalition of distributed producers.

Is the electric vehicle a solution for the wind power integration in the portuguese power system?

The integration of Plug-in electric vehicles in the transportation sector has a great potential to reduce oil dependency, the GHG emissions and to contribute for the integration of renewable sources into the electricity generation mix. Portugal has a high share of wind energy, and curtailment may occur, especially during the off-peak hours with high levels of hydro generation. In this context, the electric vehicles, seen as a distributed storage system, can help to reduce the potential wind curtailments and, therefore, increase the integration of wind power into the power system. In order to assess the energy and environmental benefits of this integration, a methodology based on a unit commitment and economic dispatch is adapted and implemented. From this methodology, the thermal generation costs, the CO2 emissions and the potential wind generation curtailment are computed. Simulation results show that a 10% penetration of electric vehicles in the Portuguese fleet would increase electrical load by 3% and reduce wind curtailment by only 26%. This results from the fact that the additional generation required to supply the electric vehicles is mostly thermal. The computed CO2 emissions of the EV are 92 g CO2/kWh which become closer to those of some new ICE engines.

A Communication and Resources Management Scheme to Support the Smart Grid Integration of Multiplayers Access to Resources Information

The increasing and intensive integration of distributed energy resources into distribution systems requires adequate methodologies to ensure a secure operation according to the smart grid paradigm. In this context, SCADA (Supervisory Control and Data Acquisition) systems are an essential infrastructure. This paper presents a conceptual design of a communication and resources management scheme based on an intelligent SCADA with a decentralized, flexible, and intelligent approach, adaptive to the context (context awareness). The methodology is used to support the energy resource management considering all the involved costs, power flows, and electricity prices leading to the network reconfiguration. The methodology also addresses the definition of the information access permissions of each player to each resource. The paper includes a 33-bus network used in a case study that considers an intensive use of distributed energy resources in five distinct implemented operation contexts.

Results of An International Study of Quantitative BCR/ABL Assays Using Defined RNA Samples

Molecular monitoring of BCR/ABL transcripts by real time quantitative reverse transcription PCR (qRT-PCR) is an essential technique for clinical management of patients with BCR/ABL-positive CML and ALL. Though quantitative BCR/ABL assays are performed in hundreds of laboratories worldwide, results among these laboratories cannot be reliably compared due to heterogeneity in test methods, data analysis, reporting, and lack of quantitative standards. Recent efforts towards standardization have been limited in scope. Aliquots of RNA were sent to clinical test centers worldwide in order to evaluate methods and reporting for e1a2, b2a2, and b3a2 transcript levels using their own qRT-PCR assays. Total RNA was isolated from tissue culture cells that expressed each of the different BCR/ABL transcripts. Serial log dilutions were prepared, ranging from 100 to 10-5, in RNA isolated from HL60 cells. Laboratories performed 5 independent qRT-PCR reactions for each sample type at each dilution. In addition, 15 qRT-PCR reactions of the 10-3 b3a2 RNA dilution were run to assess reproducibility within and between laboratories. Participants were asked to run the samples following their standard protocols and to report cycle threshold (Ct), quantitative values for BCR/ABL and housekeeping genes, and ratios of BCR/ABL to housekeeping genes for each sample RNA. Thirty-seven (n=37) participants have submitted qRT-PCR results for analysis (36, 37, and 34 labs generated data for b2a2, b3a2, and e1a2, respectively). The limit of detection for this study was defined as the lowest dilution that a Ct value could be detected for all 5 replicates. For b2a2, 15, 16, 4, and 1 lab(s) showed a limit of detection at the 10-5, 10-4, 10-3, and 10-2 dilutions, respectively. For b3a2, 20, 13, and 4 labs showed a limit of detection at the 10-5, 10-4, and 10-3 dilutions, respectively. For e1a2, 10, 21, 2, and 1 lab(s) showed a limit of detection at the 10-5, 10-4, 10-3, and 10-2 dilutions, respectively. Log %BCR/ABL ratio values provided a method for comparing results between the different laboratories for each BCR/ABL dilution series. Linear regression analysis revealed concordance among the majority of participant data over the 10-1 to 10-4 dilutions. The overall slope values showed comparable results among the majority of b2a2 (mean=0.939; median=0.9627; range (0.399 - 1.1872)), b3a2 (mean=0.925; median=0.922; range (0.625 - 1.140)), and e1a2 (mean=0.897; median=0.909; range (0.5174 - 1.138)) laboratory results (Fig. 1-3)). Thirty-four (n=34) out of the 37 laboratories reported Ct values for all 15 replicates and only those with a complete data set were included in the inter-lab calculations. Eleven laboratories either did not report their copy number data or used other reporting units such as nanograms or cell numbers; therefore, only 26 laboratories were included in the overall analysis of copy numbers. The median copy number was 348.4, with a range from 15.6 to 547,000 copies (approximately a 4.5 log difference); the median intra-lab %CV was 19.2% with a range from 4.2% to 82.6%. While our international performance evaluation using serially diluted RNA samples has reinforced the fact that heterogeneity exists among clinical laboratories, it has also demonstrated that performance within a laboratory is overall very consistent. Accordingly, the availability of defined BCR/ABL RNAs may facilitate the validation of all phases of quantitative BCR/ABL analysis and may be extremely useful as a tool for monitoring assay performance. Ongoing analyses of these materials, along with the development of additional control materials, may solidify consensus around their application in routine laboratory testing and possible integration in worldwide efforts to standardize quantitative BCR/ABL testing.

Directed integration of new insulated lentiviral vectors to heterochromatin towards safer gene transfer to stem cells

The need for better gene transfer systems towards improved risk=benefit balance for patients remains a major challenge in the clinical translation of gene therapy (GT). We have investigated the improvement of integrating vectors safety in combining (i) new short synthetic genetic insulator elements (GIE) and (ii) directing genetic integration to heterochromatin. We have designed SIN-insulated retrovectors with two candidate GIEs and could identify a specific combination of insulator 2 repeats which translates into best functional activity, high titers and boundary effect in both gammaretro (p20) and lentivectors (DCaro4) (see Duros et al, abstract ibid). Since GIEs are believed to shield the transgenic cassette from inhibitory effects and silencing, DCaro4 has been further tested with chimeric HIV-1 derived integrases which comprise C-ter chromodomains targeting heterochromatin through either histone H3 (ML6chimera) or methylatedCpGislands (ML10). With DCaro4 only and both chimeras, a homogeneous expression is evidenced in over 20% of the cells which is sustained over time. With control lentivectors, less than 2% of cells express GFP as compared to background using a control double-mutant in both catalytic and ledgf binding-sites; in addition, a two-times increase of expression can be induced with histone deacetylase inhibitors. Our approach could significantly reduce integration into open chromatin sensitive sites in stem cells at the time of transduction, a feature which might significantly decrease subsequent genotoxicity, according to X-SCIDs patients data.Work performed with the support of EC-DG research within the FP6-Network of Excellence, CLINIGENE: LSHB-CT-2006-018933

Institutional legacies, employment and professional integration of non EU/EEA doctors in France

Internationally, policies for attracting highly-skilled migrants have become the guidelines mainly used by the Organisation for Economic Co-operation and Development (OECD) countries. Governments are implementing specific procedures to capture and facilitate their mobility. However, all professions are not equal when it comes to welcoming highly-skilled migrants. The medical profession, as a protective market, is one of these. Taking the case of non-EU/EEA doctors in France, this paper shows that the medical profession defined as the closed labour market, remains the most controversial in terms of professional integration of migrants, protectionist barriers to migrant competition and challenge of medical shortage. Based on the path-dependency approach, this paper argues that non-EU/EEA doctors' issues in France derive from a complex historical process of interaction between standards settled in the past, particularly the historical power of medical corporatism, the unexpected long-term effects of French hospital reforms of 1958, and budgetary pressures. Theoretically, this paper shows two significant findings. Firstly, the French medical system has undergone a series of transformations unthinkable in the strict sense of a path-dependence approach: an opening of the medical profession to foreign physicians in the context of the Europeanisation of public policy, acceptance of non-EU/EEA doctors in a context of medical shortage and budgetary pressures. Secondly, there is no change of the overall paradigm: significantly, the recruitment policies of non-EU/EEA doctors continue to highlight the imprint of the past and reveal a significant persistence of prejudices. Non-EU/EEA doctors are not considered legitimate doctors even if they have the qualifications of physicians which are legitimate in their country and which can be recognised in other receiving countries.

Economic integration in North America: Formal, Informal and Spatial Aspects.

An exemination of a series of indicators of economic integration in the western hemisphere (Canada-USA-Latin America) indicates that it is proceeding under the influence of formal trade agreements and informal forces including technological change, multinational firm rationalization and location strategies, etc.

L'accord de Cotonou et les contradictions du droit international : l'intégration des règles de l'Organisation mondiale du commerce et des droits humains dans la coopération ACP-CE

"Thèse présentée à la Faculté des études supérieures de l'Université de Montréal en vue de l'obtention du grade de Docteur en Droit (LL.D.) Et à A la faculté de droit Jean Monnet en vue de l'obtention du doctorat en Sciences Juridiques"

On the Individual Optimality of Economic Integration

Ce document est une version antérieure du document "On the Individual Optimality of Economic Integration", nov. 2015 : http://hdl.handle.net/1866/12794

Industries et industriels français du textile face au défi international 1871-1914

Fortement liées à l’international, les industries françaises du textile ont connu une évolution erratique entre 1871 et 1914. L’adoption de tarifs hautement protectionnistes en 1892 favorise les industriels du coton au détriment de ceux travaillant la laine et la soie. Ces derniers exportent leurs marchandises luxueuses sur des marchés ouverts à la concurrence. Ils profitent peu des marchés coloniaux, moins intéressés par leurs produits. Des politiques hardies d’importation directe de la matière première permettent, notamment à Roubaix, de pallier à certains désavantages. Si plusieurs industriels incitent le gouvernement à réformer ses services commerciaux à l’étranger et à y adjoindre des spécialistes, ils retiennent peu les recommandations des experts concernant l’adoption des moyens propres à favoriser les exportations. Plusieurs carences du commerce français ont été soulignées précocement mais il a été difficile de rapidement appliquer des solutions. Dans un contexte marqué par une concurrence accrue sur les marchés extérieurs, la France s’en tire mieux qu’on a pu le penser. La flexibilité de l’appareil productif français permet d’obtenir de nombreuses commandes dans les créneaux du luxe et du demi-luxe. Son niveau d’intégration, moins élevé que dans d’autres pays, se révèle ainsi parfois être un avantage. Toutefois, l’industrie textile est handicapée par la grande difficulté des patrons à s’associer de manière stable à l’extérieur du clan familial. L’entente se réalise cependant plus aisément et avantageusement pour ceux qui ont une production spécialisée, rare ou brevetée. Les performances et l’organisation des entreprises textiles françaises à l’étranger montrent que le marché national stimulait peu les producteurs à adopter les meilleures conditions de production possibles. Ces sociétés et celles obtenant des succès à l’exportation sont souvent les plus dynamiques et les plus rentables.