Entomological news.

v. 39-40 1928

Radiocarbon dating of modern groundwater: the role of the unsaturated zone

Biological and physical processes occurring in soils may lead to significant isotopic changes between the isotopic compositions of atmospheric CO2 and of soil CO2. Also, during water and gas transport from the soil surface to the water table, isotopic changes likely occur due to numerous physical processes such as gas production and diffusion, water advection, and gas-water-rock interactions. In most cases, these changes are not included in the correction models developed for groundwater dating, whereas they can significantly impact the calculation of the 14C age. We explore the role of these processes using: i) experimental data from two aquifer sites (Fontainebleau sands and Astian sands, France), ii) a distributed model to simulate the 14C activities of soil CO2, and iii) numerical simulations in order to highlight the role of the physical processes.¦The 13C content in soil CO2 showed seasonal variations and highlighted the competition between CO2 production and CO2 diffusion. Their respective contributions played a significant role in defining the isotopic composition of CO2 at the water table. On both study sites, variations of the 14C activity in soil CO2 reflect the competition between the fluxes of root derived-CO2 and organic matter derived-CO2. Since the nuclear weapon tests in the fifties and sixties, soil CO2 became significantly depleted in 14C compared to modern atmospheric CO2. Models that take into account this 14C depletion in soil CO2 for dating modern groundwater would lead to apparent younger 14C ages than models that only consider the 14C activity in atmospheric CO2. Moreover, since 2000-2005, the inverse effect is observed as soil CO2 is enriched in 14C compared to atmospheric CO2.¦Therefore, we conclude that the isotopic composition of CO2 at the water table have to be taken into account for the dating of modern groundwater. This requires a systematic sampling of soil CO2 and the measurement of its 13C and 14C contents. We used this information in a numerical simulation to calculate the evolution of isotopic composition of CO2 from the soil surface to the water table. This simulation integrated physical processes in the unsaturated zone (e.g. CO2 production and diffusion, water advection, etc.) and gas-water-rock interactions.

Withdrawal, "serosorting" and "strategic positioning": use of risk reduction strategies with casual sex partners in men who have sex with men (MSM) in Switzerland, 2007

Introduction: 1) Withdrawal before ejaculation, "serosorting" (to choose a partner of same serostatus) and "strategic positioning" (only insertive vs. only receptive role in anal sex according to serostatus) are known to be used by MSM as alternatives to condom use. 2) Despite their questionable levels of effectiveness they are collectively labelled as "risk reduction strategies" (RRS). Objectives: The aim of this study is to estimate the prevalence and factors related to RRS in men who report unprotected anal intercourse (UAI) with occasional partners in the last 12 months. Methods: 1) In 2007, a module on RRS was included in a repeated national survey conducted among readers of gay newspapers, members of gay organizations and visitors of gay websites (N=2953). 2) Using an anonymous self-completed questionnaire, participants were asked whether, with the aim of avoiding HIV infection, RRS were used with occasional partners. Analysis: 1) Prevalences were calculated in participants who reported UAI with occasional partners in the last 12 months (n=416). 2) A logistic regression was performed, using "at least one RRS" as dependent variable. Number of partners in the last 12 months, HIV-status and usual socio-demographic characteristics were used as independent factors. Result : 1) 70% (292/416) of the participants reporting UAI used at least one RRS when they had unprotected sex with casual partners in the last 12 months (Table 1). 2) Withrawal before ejaculation was the most frequently reported strategy, followed by serosorting and strategic positioning (Table 1). 3) Participants who reported at least one RRS were more likely to be over 30 years and to belong to a gay organisation. HIV-positive and non-tested participants were less likely to report RRS than HIV-negative participants (Table 2). Conclusions: 1) The majority of MSM who reported UAI in the last 12 months tried to reduce risk of HIV transmission by using specific strategies (withdrawal, serosorting, strategic positioning). It is not known, however, to what extent the use of these strategies was systematic. 2) It is necessary to provide MSM with balanced information on these strategies and their respective level of effectiveness. 3) It is important to monitor the use of RRS in HIV behavioural surveillance surveys in MSM.

Health Impact Assessment contributing to Healthy Public Policy

Published by Public Health, April 2009 IPH recently coordinated and was guest editor for a minisymposium on Health Impact Assessment for the journal, Public Health. Three aricles contributed to the minisymposium which included an article from IPH on how HIA can contribute to healthy public policy. An article reviewing the right to the highest attainable standard of health from Paul Hunt and Gillian MacNaughton and a review of the strengths and weakneses of quantitiative methods used in HIA from Emer O'Connell and Fintan Hurley. The minisymposium evolved from the 8th International HIA conference ‘Healthy Public Policy – is Health Impact Assessment the Cornerstone’ hosted by IPH.

X-ray microtomography of Larger Foraminifera

X-ray microtomography has become a new tool in earth sciences to obtain non-destructive 3D-image data from geological objects in which variations in mineralogy, chemical composition and/or porosity create sufficient x-ray density contrasts.We present here first, preliminary results of an application to the external and internal morphology of Permian to Recent Larger Foraminifera. We use a SkyScan-1072 high-resolution desk-top micro-CT system. The system has a conical x-ray source with a spot size of about 5µm that runs at 20-100kV, 0-250µA, resulting in a maximal resolution of 5µm. X-ray transmission images are captured by a scintillator coupled via fibre optics to a 1024x1024 pixel 12-bit CCD. The object is placed between the x-ray source and the scintillator on a stub that rotates 360°around its vertical axis in steps as small as 0.24 degrees. Sample size is limited to 2 cm due to the absorption of geologic material for x-rays. The transmission images are back projected using a Feldkamp algorithm into a vertical stack of up to 1000 1Kx1K images that represent horizontal cuts of the object. This calculation takes 2 to several hours on a Double-Processor 2.4GHz PC. The stack of images (.bmp) can be visualized with any 3D-imaging software, used to produce cuts of Larger Foraminifera. Among other applications, the 3D-imaging software furnished by SkyScan can produce 3D-models by defining a threshold density value to distinguish "solid" from "void. Several models with variable threshold values and colors can be imbricated, rotated and cut together. The best results were obtained with microfossils devoid of chamber-filling cements (Permian, Eocene, Recent). However, even slight differences in cement mineralogy/composition can result in surprisingly good x-ray density contrasts.X-ray microtomography may develop into a powerful tool for larger microfossils with a complex internal structure, because it is non-destructive, requires no preparation of the specimens, and produces a true 3D-image data set. We will use these data sets in the future to produce cuts in any direction to compare them with arbitrary cuts of complex microfossils in thin sections. Many groups of benthic and planktonic foraminifera may become more easily determinable in thin section by this way.

Comparison of indices proposed as criteria for assigning skin notation

OBJECTIVES: Skin notations are used as a hazard identification tool to flag chemicals associated with a potential risk related to transdermal penetration. The transparency and rigorousness of the skin notation assignment process have recently been questioned. We compared different approaches proposed as criteria for these notations as a starting point for improving and systematizing current practice. METHODS: In this study, skin notations, dermal acute lethal dose 50 in mammals (LD(50)s) and two dermal risk indices derived from previously published work were compared using the lists of Swiss maximum allowable concentrations (MACs) and threshold limit values (TLVs) from the American Conference of Governmental Industrial Hygienists (ACGIH). The indices were both based on quantitative structure-activity relationship (QSAR) estimation of transdermal fluxes. One index compared the cumulative dose received through skin given specific exposure surface and duration to that received through lungs following inhalation 8 h at the MAC or TLV. The other index estimated the blood level increase caused by adding skin exposure to the inhalation route at kinetic steady state. Dermal-to-other route ratios of LD(50) were calculated as secondary indices of dermal penetrability. RESULTS: The working data set included 364 substances. Depending on the subdataset, agreement between the Swiss and ACGIH skin notations varied between 82 and 87%. Chemicals with a skin notation were more likely to have higher dermal risk indices and lower dermal LD(50) than chemicals without a notation (probabilities between 60 and 70%). The risk indices, based on cumulative dose and kinetic steady state, respectively, appeared proportional up to a constant independent of chemical-specific properties. They agreed well with dermal LD(50)s (Spearman correlation coefficients -0.42 to -0.43). Dermal-to-other routes LD(50) ratios were moderately associated with QSAR-based transdermal fluxes (Spearman correlation coefficients -0.2 to -0.3). CONCLUSIONS: The plausible but variable relationship between current skin notations and the different approaches tested confirm the need to improve current skin notations. QSAR-based risk indices and dermal toxicity data might be successfully integrated in a systematic alternative to current skin notations for detecting chemicals associated with potential dermal risk in the workplace. [Authors]

HIV behavioural surveillance in Switzerland: trends in drug consumption, injection and syringe distribution, 1993-2011

Background: As part of the second generation surveillance system for HIV/Aids in Switzerland, repeated cross-sectional surveys were conducted in 1993, 1994, 1996, 2000, 2006 and 2011 among attenders of all low threshold facilities (LTFs) with needle exchange programmes and/or supervised drug consumption rooms for injection or inhalation. The number of syringes distributed to the injectors has also been measured annually since 2000. Distribution in other settings, such as pharmacies, is also monitored nationally. Methods: Periodic surveys of LTFs have been conducted using an interviewer/self-administered questionnaire structured along four themes: socio-demographic characteristics, drug consumption, risk/preventive behaviour and health. Analysis is restricted to attenders who had injected drugs during their lifetime (IDU´s). Pearson's chi-square test and trend analysis were conducted on annual aggregated data. Trend significance was assessed using Stata's non parametric test nptrend. Results: Median age of IDU´s increased from 26 years in 1993 to 40 in 2011; most are men (78%). Total yearly number of syringes distributed by LTFs has decreased by 44% in 10 years. Use of cocaine has increased (Table 1). Injection, regular use of heroin and borrowing of syringes/needles have decreased, while sharing of other material remains stable. There are fewer new injectors; more IDU´s report substitution treatment. Most attenders had ever been tested for HIV (90% in 1993, 94% in 2011). Reported prevalence of HIV remained stable around 10%; that of HCV decreased from 62% in 2000 to 42% in 2011. Conclusions: Overall, findings indicate a decrease in injection as a means of drug consumption in that population. This interpretation is supported by data from other sources, such as a national decrease in distribution from other delivery points. Switzerland's behavioural surveillance system is sustainable and allows the HIV epidemic to be monitored among this hard-to-reach population, providing information for planning and evaluation.

Malarial hemozoin is a Nalp3 inflammasome activating danger signal

Characteristic symptoms of malaria include recurrent fever attacks and neurodegeneration, signs that are also found in patients with a hyperactive Nalp3 inflammasome. Plasmodium species produce a pigment called hemozoin that is generated by detoxification of heme after hemoglobin degradation in infected red blood cells. We will present data showing that hemoroin acts as a proinflammatory danger signal through activation of the Nalp3 inflammasome, causing the release of IL-1β. Similar to other Nalp3-activating particles, hemozoin activity is blocked by inhibitors of phagocytosis, K+ efflux and NADPH oxidase. In vivo, injection of hemozoin results in acute peritonitis, which is impaired in Nalp3- and IL-1R-deficient mice. Moreover, the pathogenesis of cerebral malaria is reduced in caspase-1-deficient mice infected with Plasmodium berghei sporozoites, while parasitemia remains unchanged. Thus, Plasmodium-generated hemozoin may act as a danger signal resulting in an uncontrolled proinflammatory host response and thereby contributing to the cerebral manifestations seen in malaria.

Chances and risks of nanomaterials for health and environment

Nanomaterials have properties that are often very different from normal materials made of the same substance, which can be used to create novel products with exciting properties. However, the health and environmental impact of these nanomaterials is also changed and their potential risk needs to be studied. There is evidence that some nanomaterials can pass through tissue barriers (including the blood-brain barrier) and cell membranes. This is interesting for medical applications, but it raises concerns about the impact of non-medical nanomaterials. Current research aims at better coordinating research efforts and at better communication between researchers and involved stakeholders. Many research labs and production sites currently follow strategies that were established for dealing with very toxic chemicals and powders, until future research in this field helps identify the appropriate level of protection. All these efforts will ultimately ensure a safe, healthy and environmental friendly production, use and disposal of nanomaterials.