Production of freshwater prawns in the Mekong Delta

Currently there are 2 sources of freshwater prawn Macrobrachium rosenbergii production in Vietnam - natural production from the rivers and canals and aquaculture production from ponds and ricefields. An account is given of the production of this prawn in the Mekong Delta. The prawns are harvested primarily by a common small scale method using shelter traps. The total annual freshwater prawn production in Vietnam during 1985-90 was reported to vary from 5000 to 8000 tons, most of it from natural fisheries; although there are no official statistics on the production of farmed prawns, the amount is believed to be very small. The grow-out system includes intensive monospecies pond culture, and semi-intensive or extensive integrated rice-prawn or vegetable-prawn culture.

Regulation of primary production in the Gulf of California through interaction of large-scale and local ocean processes [abstract]

EXTRACT (SEE PDF FOR FULL ABSTRACT): The suppression of primary productivity observed in eastern boundary ecosystems of the Pacific during El Nino episodes does not occur throughout the Gulf of California. On the contrary, analysis of the modern siliceous phytoplankton record from annually layered sediments and compilation of available primary productivity measurements indicate that production is significantly increased in the central Gulf during El Nino years compared to anti-El Nino years. Integrated observations of biological and physical variability during the spring of 1983, under the influence of the strong El Nino, show that very high primary productivity occurred along the eastern margin of the central Gulf. This resulted from the upwelling of a nutrient rich source provided by the locally formed Gulf water mass originating in the northern Gulf. Lower productivity and phytoplankton biomass were associated with the anomalous penetration of Tropical Surface Water along the western side of the Gulf.

Ecological and economic consequences of hypoxia: Topic 2 Report for the Integrated Assessment on Hypoxia in the Gulf of Mexico

In this report we have attempted to evaluate the ecological and economic consequences of hypoxia in the northern Gulf of Mexico. Although our initial approach was to rely on published accounts, we quickly realized that the body of published literature deahng with hypoxia was limited, and we would have to conduct our own exploratory analysis of existing Gulf data, or rely on published accounts from other systems to infer possible or potential effects of hypoxia. For the economic analysis, we developed a conceptual model of how hypoxia-related impacts could affect fisheries. Our model included both supply and demand components. The supply model had two components: (1) a physical production function for fish or shrimp, and (2) the cost of fishing. If hypoxia causes the cost of a unit of fishing effort to change, then this will result in a shift in supply. The demand model considered how hypoxia might affect the quality of landed fish or shrimp. In particular, the market value per pound is lower for small shrimp than for large shrimp. Given the limitations of the ecological assessment, the shallow continental shelf area affected by hypoxia does show signs of hypoxia-related stress. While current ecological conditions are a response to a variety of stressors, the effects of hypoxia are most obvious in the benthos that experience mortality, elimination of larger long-lived species, and a shifting of productivity to nonhypoxic periods (energy pulsing). What is not known is whether hypoxia leads to higher productivity during productive periods, or simply to a reduction of productivity during oxygen-stressed periods. The economic assessment based on fisheries data, however, failed to detect effects attributable to hypoxia. Overall, fisheries landings statistics for at least the last few decades have been relatively constant. The failure to identify clear hypoxic effects in the fisheries statistics does not necessarily mean that they are absent. There are several possibilities: (1) hypoxic effects are small relative to the overall variability in the data sets evaluated; (2) the data and the power of the analyses are not adequate; and (3) currently there are no hypoxic effects on fisheries. Lack of identified hypoxic effects in available fisheries data does not imply that effects would not occur should conditions worsen. Experience with other hypoxic zones around the globe shows that both ecological and fisheries effects become progressively more severe as hypoxia increases. Several large systems around the globe have suffered serious ecological and economic consequences from seasonal summertime hypoxia; most notable are the Kattegat and Black Sea. The consequences range from localized loss of catch and recruitment failure to complete system-wide loss of fishery species. If experiences in other systems are applicable to the Gulf of Mexico, then in the face of worsening hypoxic conditions, at some point fisheries and other species will decline, perhaps precipitously.

Integrated aquaculture-agriculture adoption and impact in rainfed farming systems in Sakata, Malawi

ICLARM introduced integrated aquaculture-agriculture (IAA) in Sakata, Malawi three years ago. Since that time, and without extension support, the number of farmers with ponds increased from 4 in 1993/94 to 12 in 1995/96. To learn why and how IAA is spreading, a study of impact and adoption was conducted in the 1995/96 production season. Interviews were conducted with farmers to discuss lAA and collect data on farm function through the use of bioresource flow diagrams. Motivations given by farmers as to why they adopted IAA were to improve household nutrition and income. Constraints to adoption identified by farmers were availability of labor and capital to purchase inputs

Integrated wastewater aquaculture

Utilization of wastewater in fish culture is based on nutrient recycling, which enhances primary productivity, planktonic biomass, macrophytes and benthic organisms which determine fish production. Production of fishes could be enhanced to 10 ton/ha through wastewater recycling by judicial stock manipulation and management. The fallow lands around a sewage fish farm could be utilized for agri-horticultural production by recycling both sludge and sewage water, resulting in a total agro production of about 110 ton/ha through rotational vegetable cropping. The potential for additional production of vegetables not only enhances revenue but also creates employment.

Utilisation of vegetable leaves for carp production

The results of two sets of experiments on mono-culture of grass carp (Ctenopharyngodon idella) and mixed culture of carps (grass carp 50 : catla 20 : rohu 15 : mrigal 15) fed exclusively with vegetable leaves are reported. The experiments were conducted with two replicates each in 0.02 ha ponds of Wastewater Aquaculture Division of the Central Institute of Freshwater Aquaculture, Rahara during 1991-93. Monoculture of grass carp stocked at 1000/ha demonstrated an average net production of 21.0 kg/ 0.02 ha/8 months (1501 kg/ha/yr). Mixed culture of carps stocked at 5000 /ha recorded an average net production of 22.5 kg/0.02 ha/8 months (1903.7 kg/ha/yr). Field studies revealed that water bind weed (Ipomoea aquatica) is the most preferred feed of grass carp amongst vegetable leaves followed by amaranths (Amaranthus gangeticus and Amaranthus viridis), cauliflower (Brassica oleracia var. votrytis) and cabbage (Brassica oleracia var. capitata) leaves. Through selection of highly productive leaf vegetables and suitable crop planning on fallow fish pond dykes, round the year feeding programme of grass carp has been explored. Recycling of sewage effluent for vegetable production and utilisation of vegetable leaves for fish production is considered an ideal way of integrated resource management for low cost production.

Effects of black Bengal goat manure on growth and production of Genetically Improved Farmed Tilapia (GIFT) starin [sic], Oreochromis niloticus

In a goat-tilapia integrated farming system, the effect of Black Bengal goat manure on the growth and production of Oreochromis niloticus was studied at the Freshwater Substation, Shantahar, Bogra for 4.5 months. The stocking density used in three treatments were, 200 goats and 15,000 GIFT strain/ha (T1); 300 goats and 15,000 GIFT strain/ha (T2); and only 15,000 GIFT strain/ha (T3). The initial individual total length and weight of stocked tilapia were 7.6 cm and 11.34 g, respectively. Twelve ponds each having an area of 40 square meters were used for this trail [sic]. On one side of each pond goat shed was constructed and the space allocated for each goat was 0.75 m x 1.5 m. Newly weaned black Bengal goats of average weight 8.45 kg was used in the trial. Every morning the goats manure was swiped out in ponds through the fixed opening of bamboo made floor of goat shed. Water depth of the ponds was maintained at 0.75 m. The highest fish production was in treatment 1 (1,750 kg/ha) followed by treatment 2 (1,455 kg/ha) and treatment 3 (621 kg/ha). The difference in individual goat weight was not significant (P>0.05) among treatments 1 and 2.

Integrated cage-cum-pond culture systems with high valued climbing perch (Anabas testudineus) in cages and low-valued carps in open ponds

An on-farm trial was conducted over 150 days to determine appropriate stocking ratio, growth and production of climbing perch (Anabas testudineus) in cages and carps in open water of ponds in eighteen farmers' ponds from Haluaghat Upazila at Mymensingh district of Bangladesh. One or two 1 m super(3) cage was suspended in each of 12 earthen ponds and other 6 ponds served as control without cages. Climbing perch of 2-3 g in size were stocked in cages while fingerlings of silver carp (Hypophthalmicthys molitrix), catla (Catla catla), rohu (Labeo rohita), mirgal (Cirhinus cirrhosus), rajputi (Puntius sarana) and common carp (Cyprinus carpio) were stocked at 1 fish/m super(2) with a species ratio of 5:4:4:4:2:1 in open water of all ponds to give cage to open-pond fish ratios of 1:1 (T sub(1:1)) and 2:1 (T sub(2:1)) and 0:1 (T sub(0:1)) as three treatments with six replicates each. Survival of climbing perch was higher in T sub(1:1) (61.67%) than that of T sub(2:1) (29.5%) and was significantly different (p>0.05) between the treatments. Stocking of small size climbing perch fry increased the mortality rate in cages. The net yields of Thai koi were 0.13±0.01 (t/ha) and 0.10±0.01 (t/ha) in treatments T sub(1:1) and T sub(2:1), respectively and both were significantly different (p>0.05). Survival of-open-pond carps was high, ranging from 50 to 91.67% with significantly lower in T sub(0:1) than that of T sub(1:1) and T sub(2:1) treatment. Net and gross yield of each carp species were significantly higher in the T sub(1:1) and T sub(2:1) treatment than that in T sub(0:1) treatment. Net revenues were positive but low in all treatments. Therefore, bigger size climbing perch with lower stocking ratio (T sub(1:1)) is suitable for integrated cage-pond culture of climbing perch and carps. However, more on-farm trials in different ecosystem with scientific interventions are necessary to develop the technology for further dissemination among the rural farmers.

Integrated farming is profitable

Growing fish with rice while maximizing land use can bring advantages to both crops as production is intensified. Details are given of the basic structure of rice field aquaculture, listing the major advantages and disadvantages of this system. Particular reference is made to the integrated farms at Culasi, Antique (Western Philippines) and at Barangay Igcocolo, Guimbal, Iloilo where agricultural crops other than rice are integrated with fish farming (tilapia -- Oreochromis mossambicus) and livestock rearing. An account is also given of the system at the AQD site at New Busuang, Kalibo, Aklan which evaluates the economic feasibility and profitability of farming mudcrab in tidal flats with existing mangroves.

Building more sustainable solutions in production-consumption systems: the case of food for people with reduced access

In new product development, the ability to integrate different dimensions of sustainability at a value chain level is still a complex, problematic goal. As product-service approaches are increasingly enabling the introduction of more sustainable paths, this paper describes the authors' experience thus far when building insights into conditions for the implementation of integrated solutions in a process of co-development and testing in real life conditions, which are driven by a social need focusing on food for people with reduced access. Throughout this process, which brought together producers, consumers and other stakeholders to design and test industrialised, sustainable solutions, empirical evidence demonstrates feasibility and usefulness of the approach and insight into the conditions for implementing interactive, comprehensive multi-stakeholder processes in real life situations. In addition, results show that the delivery of innovative solutions enabled to offer social added value, economic profits and environmental improvements under specific experimental conditions. © 2006 Elsevier Ltd. All rights reserved.

Solving problems in production scheduling

Traditionally, production scheduling has been viewed as a problem-solving task that involves a single problem - generation of a suitable schedule. This paper presents an alternative model in which individual difficulties are viewed as problems, and the task is to maintain a suitable schedule by resolving as many of these problems as possible. Decision support software is described that has facilities for defining policies to handle numerous minor problems and complete problem-solving strategies to deal with major problems. The paper then discusses the potential for this style of decision support to improve the performance of human schedulers. © 1995.

Modular distributed manufacturing systems and the implications for integrated control

Driven by the need for more responsive manufacturing processes and as a consequence of increasing complexity in products and production systems, this short paper introduces a number of developments in the area of modular, distributed manufacturing systems. Requirements for the development of such systems are addressed and, in particular, the relevance to current and future integrated control systems is examined. One of the key issues for integrated control systems in the future is the need to provide support for distributed decision-making in addition to existing distributed control capabilities.

A Computer integrated unified modelling approach to responsive manufacturing

Computer modelling approaches have significant potential to enable decision-making about various aspects of responsive manufacturing. In order to understand the system prior to the selection of any responsiveness strategy, multiple process segments of organisations need to be modelled. The article presents a novel systematic approach for creating coherent sets of unified enterprise, simulation and other supporting models that collectively facilitate responsiveness. In this approach, enterprise models are used to explicitly define relatively enduring relationships between (i) production planning and control (PPC) processes, that implement a particular strategy and (ii) process-oriented elements of production systems, that are work loaded by the PPC processes. Coherent simulation models, can in part be derived from the enterprise models, so that they computer execute production system behaviours. In this way, time-based performance outcomes can be simulated; so that the impacts of alternative PPC strategies on the planning and controlling historical or forecasted patterns of workflow, through (current and possible future) production system models, can be analysed. The article describes the unified modelling approach conceived and its application in a furniture industry case study small and medium enterprise (SME). Copyright © 2010 Inderscience Enterprises Ltd.

Low-cost PCB-integrated 10-Gb/s optical transceiver built with a novel integration method

A novel integration method for the production of cost-effective optoelectronic printed circuit boards (OE PCBs) is presented. The proposed integration method allows fabrication of OE PCBs with manufacturing processes common to the electronics industry while enabling direct attachment of electronic components onto the board with solder reflow processes as well as board assembly with automated pick-and-place tools. The OE PCB design is based on the use of polymer multimode waveguides, end-fired optical coupling schemes, and simple electro-optic connectors, eliminating the need for additional optical components in the optical layer, such as micro-mirrors and micro-lenses. A proof-of-concept low-cost optical transceiver produced with the proposed integration method is presented. This transceiver is fabricated on a low-cost FR4 substrate, comprises a polymer Y-splitter together with the electronic circuitry of the transmitter and receiver modules and achieves error-free 10-Gb/s bidirectional data transmission. Theoretical studies on the optical coupling efficiencies and alignment tolerances achieved with the employed end-fired coupling schemes are presented while experimental results on the optical transmission characteristics, frequency response, and data transmission performance of the integrated optical links are reported. The demonstrated optoelectronic unit can be used as a front-end optical network unit in short-reach datacommunication links. © 2011-2012 IEEE.