Characterization of a Trypanosoma cruzi genomic fragment complementary to several species-specific mRNAs but different from the spliced leader sequence

We have isolated a clone of Trypanosoma cruzi genimic DNA, lambda 3b2-5, which contains sequences that are reiterated in the genome. Northtern blot analysis showed that clone 3b2-5 hybridizes to 1,200-5,000 bases different mRNA species. The number of mRNAs species hybridized to clone 3b2-5 exceeds its coding capacity showing that this clone carries sequences that are common to several mRNAs species and conserved in the poly A(+) RNA. These sequences are not homologous to the T. cruzi spliced leader sequence, since clone 3b2-5 hybridize to a synthetic 20 nucleotice complementary to the spliced leader sequence. Clone 3b2-5 does not hybridize to DNA and RNA from several genera of Trypanosomatidae and other Trypanosoma species indicating that it carries T. cruzi species-specific sequences.

An interregional input-output analysis of the pollution content of trade flows and environmental trade balances between five states in the US Mid-West

In this paper we attempt an empirical application of the multi-region input-output (MRIO) method in order to enumerate the pollution content of interregional trade flows between five Mid-West regions/states in the US –Illinois, Indiana, Iowa, Michigan and Wisconsin – and the rest of the US. This allows us to analyse some very important issues in terms of the nature and significance of interregional environmental spillovers within the US Mid-West and the existence of pollution ‘trade balances’ between states. Our results raise questions in terms of the extent to which authorities at State level can control local emissions where they are limited in the way some emissions can be controlled, particularly with respect to changes in demand elsewhere in the Mid-West and US. This implies a need for policy co-ordination between national and state level authorities in the US to meet emissions reductions targets. The existence of an environmental trade balances between states also raises issues in terms of net losses/gains in terms of pollutants as a result of interregional trade within the US and whether, if certain activities can be carried out using less polluting technology in one region relative to others, it is better for the US as a whole if this type of relationship exists.

Responsibility for regional waste generation: A single region extended input-output analysis with uni-directional trade flows

The paper uses a regional input-output (IO) framework and data derived on waste generation by industry to examine regional accountability for waste generation. In addition to estimating a series of industry output-waste coefficients, the paper considers two methods for waste attribution but focuses first on one (trade endogenised linear attribution system (TELAS)) that permits a greater focus on private and public final consumption as the main exogenous driver of waste generation. Second, the paper uses a domestic technology assumption (DTA) to consider a regional ‘waste footprint’ where local consumption requirements are assumed to be met through domestic production.

An HEI-Disaggregated Input-Output Table for Scotland

This paper describes how the education sector of the Scottish Input-Output tables is disaggregated to identify a separate sector for each of Scotland’s twenty Higher Education Institutions (HEIs). The process draws on accounting and survey data to accurately determine the incomes and expenditures of each institution. In particular we emphasise determining the HEIs incomes source of origin to inform their treatment, as endogenous or exogenous, in subsequent analyses. The HEI-disaggregated Input- Output table provides a useful descriptive snapshot of the Scottish economy and the role of HEIs within it for a particular year, 2006. The table can be used to derive multipliers and conduct various impact studies of each institution or the sector as a whole. The table is furthermore useful to calibrate other multi-sectoral, HEI disaggregated models of regional economies, including Social Accounting Matrix (SAM) and computable general equilibrium (CGE) models.

An HEI-Disaggregated Input-Output Table for Wales

This paper describes how the education sector of the Welsh Input-Output tables is disaggregated to identify a separate sector for each of Wales’s twelve Higher Education Institutions (HEIs). The process draws on accounting and survey data to accurately determine the incomes and expenditures of each institution. In particular we emphasise determining the HEIs incomes source of origin to inform their treatment, as endogenous or exogenous, in subsequent analyses. The HEI-disaggregated Input-Output table provides a useful descriptive snapshot of the Welsh economy and the role of HEIs within it for a particular year, 2006. The table can be used to derive multipliers and conduct various impact studies of each institution or the sector as a whole. The table is furthermore useful to calibrate other multi-sectoral, HEI-disaggregated models of regional economies, including Social Accounting Matrix (SAM) and computable general equilibrium (CGE) models.

An HEI-Disaggregated Input-Output Table for Northern-Ireland

This paper describes how the education sector of an Input-Output table for Northern Ireland is disaggregated to identify a separate sector for each of the four Northern Irish Higher Education Institutions (HEIs). The process draws on accounting and survey data to accurately determine the incomes and expenditures of each institution. In particular we emphasise determining the HEIs incomes source of origin to inform their treatment, as endogenous or exogenous, in subsequent analyses. The HEI-disaggregated Input-Output table provides a useful descriptive snapshot of the Northern Irish economy and the role of HEIs within it for a particular year, 2006. The table can be used to derive multipliers and conduct various impact studies of each institution or the sector as a whole. The table is furthermore useful to calibrate other multisectoral, HEI-disaggregated models of regional economies, including Social Accounting Matrix (SAM) and computable general equilibrium (CGE) models.

Disaggregating the Household Sector in a 2004 UK Input Output Table and Social Accounting Matrix by Income Quintiles

This paper disaggregates a UK Input-Output (IO) table for 2004 based on household income quintiles from published survey data. In addition to the Input-Output disaggregation, the household components of a UK Income Expenditure (I-E) account used to inform a Social Accounting Matrix (SAM),have also been disaggregated by household income quintile. The focus of this paper is on household expenditure on the UK energy sector.

Beyond Intermediates: The Role of Consumption and Commuting in the Construction of Local Input-Output Tables

It is a well-established fact in the literature on simulating Input-Output tables that mechanical methods for estimating intermediate trade lead to biased results where cross-hauling is underestimated and Type-I multipliers are overstated. Repeated findings to this effect have led to a primary emphasis on advocating the accurate estimation of intermediate trade flows. This paper reviews previous research and argues for a qualification of the consensus view: When simulating IO tables, construction approaches need to consider spill-over effects driven by wage and consumption flows. In particular, for the case of metropolitan economies, wage and consumption flows are important if accurate Type-II multipliers are to be obtained. This is demonstrated by constructing an interregional Input-Output table, which captures interdependencies between a city and its commuter belt, nested within the wider regional economy. In addition to identifying interdependencies caused by interregional intermediate purchases, data on subregional household incomes and commuter flows are used to identify interdependencies from wage payments and household consumption. The construction of the table is varied around a range of assumptions on intermediate trade and household consumption to capture the sensitivity of multipliers.

Sobre los subsistemas input-output en el análisis de emisiones contaminantes. Una aplicación a las emisiones de CH4 en Cataluña

En el presente trabajo se desarrolla un estudio de las emisiones de CH4 relacionadas con el sector agroalimentario catalán a través de un análisis alternativo, o al menos complementario, de subsistemas input-output. Una herramienta de gran utilidad para estudiar la estructura productiva de los diferentes sectores que componen una economía. La aplicación de esta técnica permite las descomposición del subsistema en distintos efectos en función de los vínculos intersectoriales existentes con el conjunto de las ramas productivas de la economía, dentro y fuera del subsistema. De los resultados obtenidos destaca la importancia de las relaciones intrasectoriales del subsistema agroalimentario, que muestra una relevante autonomía en cuanto a este tipo de emisiones respecto al resto de la economía. Esta característica orienta el tipo de políticas medioambientales a implementar con el objetivo de reducir el impacto atmosférico de dicha actividad.

A new repetitive DNA sequence from Trypanosoma cruzi

Tandemly repeated DNA sequences are found in the genome of higher eukaryotes, and have also been demonstrated in Trypanosoma cruzi. Repeated DNA sequences are potentially useful for the diagnostic detection of T. cruzi (A. Gonzales et al., 1984, Proc. Natl. Acad. Sci. USA, 81: 3356-3360). We have isoleted two clones from a genomic library of T. cruzi (Y strain) that contain, in one clone a family of at least seven copies of a repetitive sequence of approximately 600 base pairs, and in the other an independent copy of the same sequence. One copy of the repetition (HSP) and the independent clone (HCR) were sequenced by the Sanger procedure (Fig.). This sequence hybridized to four strains of T. cruzi tested and did not hybridize to eleven species of trypanosotids from five different Genera, being a good candidate for diagnostic assays. GenBank accession numbers: HSP#m31919, HCR#31920.

Alineamiento múltiple de secuencias con T-Coffee: una aproximación paralela

Las aplicaciones de alineamiento múltiple de secuencias son prototipos de aplicaciones que requieren elevada potencia de cómputo y memoria. Se destacan por la relevancia científica que tienen los resultados que brindan a investigaciones científicas en el campo de la biomedicina, genética y farmacología. Las aplicaciones de alineamiento múltiple tienen la limitante de que no son capaces de procesar miles de secuencias, por lo que se hace necesario crear un modelo para resolver la problemática. Analizando el volumen de datos que se manipulan en el área de las ciencias biológica y la complejidad de los algoritmos de alineamiento de secuencias, la única vía de solución del problema es a través de la utilización de entornos de cómputo paralelos y la computación de altas prestaciones. La investigación realizada por nosotros tiene como objetivo la creación de un modelo paralelo que le permita a los algoritmos de alineamiento múltiple aumentar el número de secuencias a procesar, tratando de mantener la calidad en los resultados para garantizar la precisión científica. El modelo que proponemos emplea como base la clusterización de las secuencias de entrada utilizando criterios biológicos que permiten mantener la calidad de los resultados. Además, el modelo se enfoca en la disminución del tiempo de cómputo y consumo de memoria. Para presentar y validar el modelo utilizamos T-Coffee, como plataforma de desarrollo e investigación. El modelo propuesto pudiera ser aplicado a cualquier otro algoritmo de alineamiento múltiple de secuencias.

Análisis y sintonización de aplicaciones paralelas/distribuidas de bioinformática: caso de estudio mpiBLAST

En termes de temps d'execució i ús de dades, les aplicacions paral·leles/distribuïdes poden tenir execucions variables, fins i tot quan s'empra el mateix conjunt de dades d'entrada. Existeixen certs aspectes de rendiment relacionats amb l'entorn que poden afectar dinàmicament el comportament de l'aplicació, tals com: la capacitat de la memòria, latència de la xarxa, el nombre de nodes, l'heterogeneïtat dels nodes, entre d'altres. És important considerar que l'aplicació pot executar-se en diferents configuracions de maquinari i el desenvolupador d'aplicacions no port garantir que els ajustaments de rendiment per a un sistema en particular continuïn essent vàlids per a d'altres configuracions. L'anàlisi dinàmica de les aplicacions ha demostrat ser el millor enfocament per a l'anàlisi del rendiment per dues raons principals. En primer lloc, ofereix una solució molt còmoda des del punt de vista dels desenvolupadors mentre que aquests dissenyen i evaluen les seves aplicacions paral·leles. En segon lloc, perquè s'adapta millor a l'aplicació durant l'execució. Aquest enfocament no requereix la intervenció de desenvolupadors o fins i tot l'accés al codi font de l'aplicació. S'analitza l'aplicació en temps real d'execució i es considra i analitza la recerca dels possibles colls d'ampolla i optimitzacions. Per a optimitzar l'execució de l'aplicació bioinformàtica mpiBLAST, vam analitzar el seu comportament per a identificar els paràmetres que intervenen en el rendiment d'ella, com ara: l'ús de la memòria, l'ús de la xarxa, patrons d'E/S, el sistema de fitxers emprat, l'arquitectura del processador, la grandària de la base de dades biològica, la grandària de la seqüència de consulta, la distribució de les seqüències dintre d'elles, el nombre de fragments de la base de dades i/o la granularitat dels treballs assignats a cada procés. El nostre objectiu és determinar quins d'aquests paràmetres tenen major impacte en el rendiment de les aplicacions i com ajustar-los dinàmicament per a millorar el rendiment de l'aplicació. Analitzant el rendiment de l'aplicació mpiBLAST hem trobat un conjunt de dades que identifiquen cert nivell de serial·lització dintre l'execució. Reconeixent l'impacte de la caracterització de les seqüències dintre de les diferents bases de dades i una relació entre la capacitat dels workers i la granularitat de la càrrega de treball actual, aquestes podrien ser sintonitzades dinàmicament. Altres millores també inclouen optimitzacions relacionades amb el sistema de fitxers paral·lel i la possibilitat d'execució en múltiples multinucli. La grandària de gra de treball està influenciat per factors com el tipus de base de dades, la grandària de la base de dades, i la relació entre grandària de la càrrega de treball i la capacitat dels treballadors.

Versatile gene-specific sequence tags for Arabidopsis functional genomics: transcript profiling and reverse genetics applications.

Microarray transcript profiling and RNA interference are two new technologies crucial for large-scale gene function studies in multicellular eukaryotes. Both rely on sequence-specific hybridization between complementary nucleic acid strands, inciting us to create a collection of gene-specific sequence tags (GSTs) representing at least 21,500 Arabidopsis genes and which are compatible with both approaches. The GSTs were carefully selected to ensure that each of them shared no significant similarity with any other region in the Arabidopsis genome. They were synthesized by PCR amplification from genomic DNA. Spotted microarrays fabricated from the GSTs show good dynamic range, specificity, and sensitivity in transcript profiling experiments. The GSTs have also been transferred to bacterial plasmid vectors via recombinational cloning protocols. These cloned GSTs constitute the ideal starting point for a variety of functional approaches, including reverse genetics. We have subcloned GSTs on a large scale into vectors designed for gene silencing in plant cells. We show that in planta expression of GST hairpin RNA results in the expected phenotypes in silenced Arabidopsis lines. These versatile GST resources provide novel and powerful tools for functional genomics.

Induction in transgenic mice of HLA-A2.1-restricted cytotoxic T cells specific for a peptide sequence from a mutated p21ras protein.

Cytotoxic T cells (CTL) recognize short peptides that are derived from the proteolysis of endogenous cellular proteins and presented on the cell surface as a complex with MHC class I molecules. CTL can recognize single amino acid substitutions in proteins, including those involved in malignant transformation. The mutated sequence of an oncogene may be presented on the cell surface as a peptide, and thus represents a potential target antigen for tumour therapy. The p21ras gene is mutated in a wide variety of tumours and since the transforming mutations result in amino acid substitutions at positions 12, 13 and 61 of the protein, a limited number of ras peptides could potentially be used in the treatment of a wide variety of malignancies. A common substitution is Val for Gly at position 12 of p21ras. In this study, we show that the peptide sequence from position 5 to position 14 with Val at position 12-ras p5-14 (Val-12)-has a motif which allows it to bind to HLA-A2.1. HLA-A2.1-restricted ras p5-14 (Val-12)-specific CTL were induced in mice transgenic for both HLA-A2.1 and human beta2-microglobulin after in vivo priming with the peptide. The murine CTL could recognize the ras p5-14 (Val-12) peptide when they were presented on both murine and human target cells bearing HLA-A2.1. No cross-reactivity was observed with the native peptide ras p5-14 (Gly-12), and this peptide was not immunogenic in HLA-A2.1 transgenic mice. This represents an interesting model for the study of an HLA-restricted CD8 cytotoxic T cell response to a defined tumour antigen in vivo.