Coleta de dados, modelagem e controle de qualidade do sistema de planejamento pinnacle3

Qualidade na coleta de dados do feixe de radiação, modelagem por meio do sistema de planejamento de tratamento (SPT) e controle da qualidade do processo envolvido são cruciais à fidedignidade do serviço de radioterapia de forma a contribuir à eficácia do tratamento e segurança do principal ente envolvido no final de toda essa sistemática, o paciente. Para isso foi proposto nesse presente trabalho a coleta de dados do feixe de raios-x de 6MV seguido da introdução desses dados ao SPT para processo de modelagem computacional que teve agregado, a todo esses processos, o controle da qualidade segundo critérios de aceitação

Análise de características físicas de agregados de resíduos de construção e demolição, para fins de pavimentação

This work presents the results obtained in analyzes of aggregates from construction and demolition waste produced by the plant of the City of Guaratinguetá. Using this data and comparing with the specifications of NBR 15115, it was found that the materials do not possess the requisite minimum characteristics to be utilized as a basis for low-pavement traffic. In order to identify the main reasons of the material does not fit in the standard, we used the data obtained in a study conducted by Professor. Dr. Luiz Eduardo de Oliveira at the plant of the company AB Environmental Solutions Ltd., located in Pindamonhangaba. With different characteristics, the aggregates from construction and demolition waste produced by this plant showed the possibility of using pavements. The use of these residues in paving reduces the impact on the environment caused by construction.

Tecnologias, conceitos e propostas de materiais de construção sustentável do Centro de Vivências da UNESP, Rio Claro/SP

Due to the great impact caused by construction, the university has a major role in the development of alternative projects and studies aimed at sustainable development. This project presents the advantages and importance of building in a sustainable manner from the beginning to end of the Center of Experiences at UNESP, Rio Claro / SP. It will be presented alternative building materials that have high environmental performance and that bring the least negative impacts as possible. Providing a Center of Experiences through a sustainable building is in need of the university to renovate the new trends of society in which the construction is in harmony with the environment in which it is inserted. This sustainable building will serve as a model for students and residents of Rio Claro, since the building itself will serve as a way of learning to the audience goer, as well as for the other campuses of UNESP. Thus, this project will serve as a guide for decision makers facing the huge amount of building materials available in the market

Comparação entre metodologias de controle de qualidade em mamografia digital

The best way to detect breast cancer is by screening mammography. The mammography equipments are dedicated and require a rigorous quality control in order to have a good quality image and to early detect this disease. The digital equipment is relatively new in the market and there isn’t a national rule for quality control for several types of digital detectors. This study has proposed to compare two different tests manuals for quality control provided by the manufacturers of digital mammography equipments, and also compare them to the “European guidelines for quality assurance in breast cancer screening and diagnosis “(2006). The studied equipments were: Senographe 2000D from General Electric (GE) and the Hologic Selenia Lorad. Both were digital mammography equipments, the GE unit presents an indirect digital system and the other presents a direct digital system. Physical parameters of the image have been studied, such as spatial resolution, contrast resolution, noise, signal-tonoise ratio, contrast-to-noise ratio and modulation transfer function. After that, a study of the importance of quality control and the requirement to implement a Quality Assurance Program has been done. One data collection was done to compare those manual, it was done by checking which tests are indicated and the minimum frequency which they should be conducted in accordance with each manufacturer. The tests were performed by different methodologies and the results were compared. The examined tests were: the breast entrance skin dose, mean glandular dose, contrast-to-noise ratio, signal-to-noise ratio, automatic exposure control and automatic control of density, modulation transfer function, equipment resolution, homogeneity and ghost

Estudo da reutilização de materiais reciclados em obras de construção civil

This graduation project aims to study and analyze the reuse of solid waste projects in Civil Construction, checking the different factors such as economic viability, production processes, classification of the main materials, advantages and disadvantages, always seeking to guide themselves according Brazilian legislation establishing criteria for Waste Management of Construction. In addition, points are studied that prevent the expansion of recycling construction waste. It also offers needs improvements to the implementation of recycling to be carried out on a more expressive than current

Otimização de procedimentos de controle de qualidade em equipamentos radiográficos convencionais do Instituto de Eletrotécnica e Energia - USP

Radiography is currently an important method of diagnosis, both medical, dental and veterinary. The image in this type of survey is obtained using an X-ray beam, where the radiologist can possibly view structures of interest. It isn't always possible to get the desired images due to various factors, such as equipment limitations. The Administrative Law 453/98, the State Resolution SS 625/94, and other standards require testing and quality control acceptance limits that guarantee a good performance of the equipment for the security and quality of care, giving service users greater effectiveness in exams. This study were performed in the accompaniment of testing procedures for quality control established by Administrative Law 453/98 in several X-ray equipment to make a comparison and optimization in the descriptions of the procedures used by the Institute for Electrical Energy and the University of São Paulo (IEE / USP / SP).The optimization of the procedures were performed with the aid of a current literature, the Resolution 453/98, State Resolution SS 625/94 and other international standards. On this basis it was possible to observe the importance of regular monitoring of tests for an update, following the technological development of instruments used in the service

Diagnóstico dos resíduos de construção e demolição: uma contribuição à elaboração e implantação da gestão integrada dos RCD no município de Guaratinguetá – SP

The problem of solid waste has caused discussions about the huge amount that is generated in Brazilian cities, in particular the waste from construction and demolition (CDW), called spoil. In many cases these wastes are disposed of improperly and even criminally in urban areas, causing serious economic, social and environmental problems. Due to the lack of public policies and appropriate management of such waste came up with the CONAMA, in its resolution nº 307 of 2002, the obligation of municipalities in deploy the integrated management of construction and demolition wastes for the resolution of problems caused by inadequate management and disposal of such waste. By following a methodology suggested by Pinto & González (2005), with adaptations of other authors, it is proposed in this work the lifting of a diagnosis of the CDW in the municipality of Guaratinguetá-SP, through theoretical analysis and field research, with purpose to guide the public servants in the elaboration and implementation of integrated management. The results must contain information necessary for that end, such as the knowledge of generators, agents, collectors and transporters, disposition areas and the disposal of waste

Diagnóstico dos resíduos de construção e demolição para elaboração e implantação da gestão integrada dos RCD no município de Guanambi – BA

Taking as starting the environmental, social and economic impact of construction and demolition waste in Brazilian cities were created legal mechanisms for management and administration, seeking to minimize the impacts to the maximum, since the irregular deposition can be characterized as environmental crime. CONAMA Resolution No. 307 of 2002 establishing the mandatory implementation of an Integrated Management System Construction Waste and Demolition, guiding the classification and designation of the waste generating agents, collection agents and transporters, and the areas of culling and disposal of waste. The technical partnership between the Ministry of Cities, the Environment Ministry and the Caixa Econômica Federal, coordinated by Pinto & Gonzales (2005) Management in the work and management of construction waste, proposed a guidance manual to guide the implementation of a System Integrated Management of Construction Waste in Municipalities. The municipality of Guanambi in the state of Bahia, in full economic rise, lacks a waste management of construction and demolition, since there has areas for the disposal of waste being proposed in this paper the diagnosis of waste generation in the municipality as part of the methodology proposed by the work of Pinto & Gonzales (2005).

Testes de Controle de Qualidade em Sistema de Processamento Computadorizado FUJI

Computed Radiography (CR) is a term used to describe the system that electronically records a radiographic image. CR systems use receivers or IP (imaging plate) to capture the analog signals and then allow the readers to do the image processing and converted into digital information. With the increasing expansion of the CR for medical diagnostics it is necessary that these systems receive the same type of monitoring related to Quality Control and Acceptance to the conventional processing systems. The current legislation fails to specify the parameters and procedures to be tested, allowing that somehow, some equipment is not fully able to use in clinical routine. In this project we used the standard AAPM Report Number 93, which is already fully established outside the country and displays all test parameters in CR. From there were chosen three types of tests that were performed in a satisfactory sampling of IP´s. With this procedure it was possible to establish which of those IP's should be out of use, which reveals the important purpose of the study, demonstrating the need for Quality Control Testing and Acceptance in Computerized Radiography as soon as possible are included in the legislation regulator in the country

Controle de Qualidade em Raios X Odontológico Periapical

The purpose of this work is to provide quality control requirements and security in dental x-rays in order to obtain good quality image which allows the correct diagnosis, which reduces the dose to the patient, mainly due to the repetition of tests, and decreasing cost. The requirements apply to related activities to quality control and procedures using ionizing radiation for diagnostic imaging in dentistry by evaluating a minimum set of parameters to be tested or verified. Quality control follows the Ordinance No. 453 of the Ministry of Health of 06.01.1998, SS Resolution No. 625 of 12.14.1994 and Resolution No. 64 of the Health Surveillance Center – Department of Health of Sao Paulo and National Health Surveillance Agency – Ministry of Health of Brazil. This study was conducted in the city of Marilia, Sao Paulo, along with the Company P&R Consulting and Medical Physics, in a dental clinic of the University UNIMAR in the x-ray equipment used on that site. The physical parameters of the device were tested with the aid of ionization chambers to measure rates of radiation, electrometer to measure rates of time, kV and doses, radiographic films and positioning devices. Finally, this work demonstrates the need and importance of quality control, which one ensures the proper use of x-ray machines, maintaining efficiency and at the same time it reduces the risks to the patient, to the dentist and to the general public

Desenvolvimento e controle de qualidade físico e microbiológico de emulsão O/A contendo óleo essencial de Melaleuca alternifolia

Sabe-se que na atualidade, é grande a preocupação da comunidade científica mundial, em relação à resistência microbiana frente às substâncias convencionais, utilizadas indiscriminadamente, por isso, é crescente a motivação da pesquisa básica na bioprospecção de novas substâncias, que apresentem atividade antimicrobiana e antifúngica e que possam ser uma alternativa segura e eficaz contra esses microorganismos no tratamento das doenças causadas por eles. As dermatofitoses, por exemplo, são processos infecciosos de pele, pêlo e unhas que acometem muitas pessoas, de todas as faixas etárias, no mundo todo, provocando as chamadas tinhas ou tineas, denominadas corporis, pedis, cruris, capitis, unguium(onicomicose) e outras (dependendo o local do corpo onde estão), causadas pelo dermatófito filamentoso, Trichophyton rubrum. Estudos envolvendo este patógeno são cada vez mais importantes, devido ao aparecimento de linhagens resistentes aos medicamentos antifúngicos disponíveis no mercado, e ao comportamento invasivo deste agente em pacientes com o sistema imune comprometido. Porém, somente a descoberta de novas drogas não é suficiente, é preciso desenvolver produtos eficazes e seguros, que possam veicular essas substâncias sem causar prejuízo ao paciente. Sendo assim, a proposta desse trabalho é desenvolver uma emulsão A/O, contendo óleo essencial de Melaleuca alternifolia (TTO), verificar sua estabilidade preliminar e caracterizá-la realizando o estudo reológico da formulação, determinar a concentração inibitória mínima (CIM) e a concentração fungicida mínima (CFM) do TTO e averiguar a atividade antifúngica in vitro da emulsão frente ao T. rubrum, agente patogênico ao qual se destina o uso do produto

Potencial de aproveitamento de agregados reciclados de resíduos da construção e demolição

CONAMA Resolution 307 / 02, in Article 4, states that the primary goal of those involved in the reuse process of construction and demolition waste is not the generation of such wastes, secondarily is the reduce, reuse, recycling and proper disposal of such material. The disposal problem of large volumes of waste generated coupled with the scarcity of natural resources and environmental degradation involved in the extraction process of such materials resulted in several studies, that after many analyzes proposed various forms of reuse and recycling . The NBR 15.116/04 provides requirements for the use of recycled aggregates in paving and concrete without structural function. This work aims to show the usage potential of recycled aggregates from waste generated in construction and demolition sampled Group AB Areias, Pindamonhangaba (SP) in order to meet the standards in Brazil, as well as the environmental contribution by reducing the use of raw materials extracted from nature. After stabilization and particle size analysis of the California Bearing Ratio and Proctor, obtained mixtures of recycled aggregates showed higher values submitted by the minimum standards related, with excellent potential for use in paving

A prática de treinamento dos corpos dentro da empresa: um estudo sobre uma ferramenta de controle da qualidade

Befor the vast economical growth and wild scientific and technological development, the companies are demanding, more and more qualification and acting of the services rendered by their employees. Like this, tasks are restricted the they be done with excellence, because the companies are always controlling the worker's development. They are several the tools used by the companies, as acting indexes to control the course of the worker's activities or certain section, integrations for new employees with the objective to present the line of work of the company so that the new employee is framed in these patterns, trainings offered for the employees to carry out their services with quality and compromising, evaluations of year end in order to test the worker's knowledge and to demand better results, finally, the companies hope the employee integrates normativamente into the reality of the company, in way to contribute for the atingimento of the organizational strategies, always collecting for this to obtain the best results and contribute to the growth of the company. This way, that research will present a tool of control of the total quality applied in a company in Rio Clearing's city and that it is managed by an educador. They will be verified the objectives that the company has in relationship a this control, the worker's subjectivity as participant subject of the tool of control of the System of Administration of the Quality and the worker's different glances before these aspects throught an interview.

Controle de qualidade e qualificação de fornecedores de matérias primas utilizadas em uma farmácia de manipulação

Este trabalho apresenta uma proposta de qualificação de fornecedores de matérias primas para uma farmácia na cidade de Araraquara, estado de São Paulo. A qualificação de fornecedores é um processo de extrema importância no que diz respeito ao produto acabado e, para que tenha qualidade, essa qualidade deve vir desde as matérias primas que o compõem. A RDC nº 67 de 8 de outubro de 2007 diz que as farmácias devem adquirir matérias primas apenas de fornecedores qualificados. Para o processo de qualificação, a mesma RDC diz que devem ser feitas auditorias e levantamentos de dados dos fornecedores, bem como o controle de qualidade das matérias primas fornecidas. Foram escolhidas quatro matérias primas utilizadas pela farmácia de três fornecedores diferentes. O processo começou com o envio de questionários avaliativos, onde cada fornecedor deveria colocar as informações solicitadas. O passo seguinte é o controle de qualidade das matérias primas. A partir dos dados dos questionários e dos resultados do controle de qualidade, acrescidos de outros fatores como prazo de entrega, compõe-se o Índice de Qualificação do Fornecedor (IQF), que é como uma “nota” que o fornecedor recebe e, através desse índice, pode ser DESQUALIFICADO, QUALIFICADO ou ainda CERTIFICADO. A certificação ocorre após a auditoria do estabelecimento do fornecedor e também entra na composição do IQF. Após o processo de qualificação dos três fornecedores, foi elaborado um Procedimento Operacional Padrão (POP) com todas as etapas que devem ser feitas para a qualificação...

Controle de qualidade em raios-x convencional

The progress in radiology is related with the development of new systems of image formation with the lesser dose in the pacient. The improve of the dose in the pacient, without compromising the quality of the image, is one of the responsibilities of a medical physicist in a sector of diagnosis for image. This research has as objective to evaluate the conditions of use of an equipment of x-rays, from tests of quality control. The results gotten in this work have been part of data of an Effective Program of Quality Control (PECQ) of the sector of diagnosis for image of the Hospital das Clínicas da Faculdade de Medicina de Botucatu - UNESP (HCFMB-UNESP)