Efeitos esqueléticos e dentários decorrentes da expansão rápida maxilar

This study evaluated the maxillary transversal changes caused by the rapid maxillary expansion (RME) accomplished by Hyrax appliance. Sixteen children from both genders were selected and treated, with ages between 7.7 to 10.8 years, who presented unilateral or bilateral posterior crossbite. Postero-anterior radiographs were taken at the beginning of the treatment, end and post-retention period. The treatment promoted an average opening of 8.8 mm of IMD (intermolar distance), 2.33 mm of IAD (interapex distance) and none of IID (interincisal distance). At the end of retention period, relapse was observed, with a decrease of 4.3 mm of IMD, 1.23 mm of IAD, a non-significant enlargement of IID (0,38 mm).These results confirm the significant influence of Hyrax appliance on transverse dimensions, represented by enlargement of IMD and IAD and its effectiveness to solve posterior crossbites.

Ertty System®: distalização segmentar

Introduction: Ertty System® is an intraoral system of biomechanical forces to move teeth anteroposteriorly. The application of forces on this system results in the distalization of the molar and all lateral segment in the side to be distalized, including premolars and canine, resulting in alveolar bone remodeling. This system is indicated to correct uni- or bilateral maxillary dental Class II malocclusion in permanent dentition both in children and adults. It is contraindicated in case of skeletal asymmetries, protrusion of maxillary and mandibular teeth, skeletal Class II and Class II subdivision malocclusions with mandibular midline deviation. This study describes Ertty System® and presents two clinical cases treated using this system. The two female patients presented with Class II malocclusion subdivision and maxillary midline deviation. Results: It was achieved correct alignment and leveling, Class I dental relation and correction of upper midline. Conclusion: The success and stability of results confirmed diagnosis and treatment adequacy.

Otimização do tracionamento de canino impactado pela técnica do arco segmentado: relato de caso clinico

Upper canines impaction are considered the second most frequent and are associated to important esthetics and functional limitations. Among the treatment strategies described in the literature the most commonly used are the extraction of the primary canines and the surgical exposure followed by orthodontic traction, that requires an adequate interdisciplinary approach. The aim of this case report is to draw the attention of the clinician to the possibility of adapting the segmented arch technique to manage a canine impaction clinical case.

Tratamento cirúrgico de canino incluso em mento: relato de caso

The mandibular and maxillary canines when well positioned in the arch, are important functionally and aesthetically. Although these teeth are frequently malpositioned in the dental arch, their absence of eruption are not common, occuring more frequently with the maxillary canine than the mandibular canine. The canine transmigration is a well-known pre eruptive phenomenon in which the tooth goes thru the facial midline, occurring more frequently in the mandible than in maxila. Females are more susceptible than males and the right side more than the left one. Normally the patients do not show any symptoms, and this condition is observed during radiographic exams to diagnose the late exfoliation of the deciduous canine or for any other purpose. Due to the relationship between impacted canines and pathologic lesions, infection, trauma to the adjacent teeth, pain, ectopic eruption and interference with prosthesis, it´s indicated the surgical extraction of these teeth. The goal of this article is to describe and discuss the surgical treatment of an impacted canine (43) in the chin.

Aplicação de engenharia tecidual na elevação de seio maxilar: uma revisão sistemática da literatura

The purpose of this literature review is to present the state-of-the-art on the application of tissue engineering techniques in sinus lifts procedures, reporting the influence of these techniques in increasing bone height and volume in the maxillary sinus, and the osseointegration of the implants installed in the grafted areas. PubMed and Scopus databases were searched using the keywords “scaffold” OR “engineered tissue” AND “sinus augmention” OR “sinus floor elevation”. In the initial search 463 articles were selected, of which 19 were selected abstracts reading, with nine papers selected by the end, for evaluation of the application of tissue engineering techniques in sinus lift procedures. Despite the positive results of tissue engineering procedures in sinus floor elevation reported in the selected articles, further studies are still needed, for a better standardization of experimental models and materials used, leading to definitive conclusions about the effects of the application of tissue engineering procedures on bone formation in maxillary sinus lifting procedures.

O uso de rhBMP-2 para aumento ósseo maxilar: relato de caso clínico

The bone resorption in the anterior maxilla, due to its aesthetic importance, can be considered one of the challenges in implant dentistry. Autogenous bone graft is the most indicated bone augmentation procedure, aiming an implant supported rehabilitation.. Alternatively, some other graft procedures can be done with homogenous and xenogenous bone graft, biomaterials and different associations. Additionally to the mentioned biomaterials, the bone morphogenetic protein (BMP), specially the rhBMP-2, which was characterized as a bone osteoinductor, and consecutively, a potential autogenous graft substitute, with previsibility and no necessity of association to other biomaterial. The objective of this study is to present a single case using the rhBMP-2 for bone augmentation.

Análise clínica, tomográfica e histológica comparativa entre ha+β-tcp isolado ou associado a proteínas derivadas do esmalte utilizadas como enxertos após a elevação da membrana do seio maxilar e colocação de implantes: estudo piloto

The aim of this study was to evaluate the clinical, tomographic, and histological similarity within the use of HA+β-TCP (Boneceramic) alone or associated with enamel matrix derived (EMD) proteins in sinus lifting procedures with subsequent dental implant placement. We selected two patients with residual bony ridges between 3 mm and 5 mm in height in need of bone grafts. Six months later, eight implants were installed (two implants at each site). Biopsies were made, and the tissue was processed and stained with HE solution. Tomographic evaluation showed bone height gain up to 10.0 mm on average. Histology showed new bone formation for both groups, with similar bone density and trabecular interconnectivity. It can be concluded that the HA+β-TCP graft isolated or associated to EMD provided bone height gain in sinus lifting procedures, with similar clinical, tomographic and histological characteristics.

Reabilitação estético-funcional sobre implantes agulhados e endósseos

This report shows the resolution of a case study whose aim was promote the aesthetic and functional rehabilitation of upper left hemi-arch over endosseous and needle implant prostheses. To improve the position of the needle implants, we performed the bucco-palatal bending of needles splinting them with composite resin; we removed the screwed implant prosthesis in the regions of the premolars (24 and 25) and molar (26). The mini-abutments of the last two implants were replaced, and in the first premolar and canine, we used cemented abutments due to implant angulation having planned soldering because of implant size and contact with one needle implant that could interfere with intimate contact bone/implant damaging biomechanics. Pick-up impressions were performed with an open tray, using a retractor cord in the needle implants and respective transfer copings. Therefore, models were related on semi-adjustable articulator after a face-bow recording and interocclusal indexes. After working cast fabrication and try-in of infra-structures, these were adjusted and related into the articulator again. Then, after ceramic build-up, adjustments, finishing, and torque, chemically-activated resin cement was applied on units 21 to 24. At the end of the case, we concluded that a good aesthetic and functional rehabilitation depends on thorough knowledge of techniques for each clinical situation.

Avaliação eletromiográfica dos músculos masseter e temporal, força de mordida e qualidade de vida em pacientes desdentados antes, durante e após a instalação e adaptação de novas próteses - total maxilar e overdenture mandibular sobre implante

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Tumor mamário canino: estudo in vitro, imunomarcação e ação da doxorrubicina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Regeneração óssea guiada com o uso de membrana de copolímero PLA/PGA em levantamento da membrana do seio maxilar: estudo experimental com análises histomorfométrica e imunoistoquímica

Pós-graduação em Odontologia - FOA

Vacina de DNA: uma alternativa para o tratamento do melanoma canino: revisão de literatura

O melanoma é considerado um dos tumores cutâneos de maior importância em cães devido ao seu caráter agressivo, à capacidade de produzir metástases em estágios precoces e à baixa resposta aos tratamentos não cirúrgicos. Recentemente, as vacinas de DNA apresentam-se promissoras na terapêutica do melanoma canino. O objetivo deste trabalho é apresentar uma revisão bibliográfica sobre o assunto. As vacinas de DNA são baseadas em plasmídeos que contêm o gene codificante para o antígeno alvo, expressando-o na célula do hospedeiro e apresentando, assim, vantagens em relação às vacinas tradicionais, como: facilidade de produção, estabilidade térmica, baixo custo e estimulação da resposta imune celular (linfócitos T CD8+). Devido ao sucesso limitado das terapias padrões, o estabelecimento de uma vacina de DNA efetiva aumenta a possibilidade de uma terapia promissora para o melanoma canino, podendo trazer novas expectativas aos animais portadores dessa neoplasia.

Combinação de técnicas para tratamento cirúrgico de fratura do complexo zigomático-maxilar: relato de caso

The zygomatic-maxillary complex due to its projection framed as one of the areas hardest hit by injuries, as well as the nasal bones. Component important in this context, the zygomatic arch fracture is under the direct action of forces due to its structure fragile, resulting in loss of normal convex curvature. Therefore, it is aimed to report a clinical case of male patient, who had leucoderma zygomatic bone fracture using access transcutaneous and intra-oral fracture reduction body of zygoma and zygomatic arch. In addition to evidence combination of closed and open techniques for solving the case. The technique provided the patient excellent cosmetic and functional results.

Raiz dentária impelida para o seio maxilar após exodontia: uma opção de tratamento

Introduction: Upper teeth, especially first premolars and molars, can have a close anatomical relationship with the floor of maxillary sinus. For this reason, accidental displacement of dental roots into the sinus could happen during exodontic procedures. Objective: Description the treatment performed to remove a tooth root within the maxillary sinus, displaced during an extraction procedure. Case Report: Female patient, 39 years of age, which reported being subjected to the extraction of the element 26 for about two months. The patient was reported by the practitioner who performed the extraction that a root was pushed into the maxillary sinus. The treatment plan included surgery to remove the root within the maxillary sinus. Final Comments: Clinicians should be careful during extractions, to prevent these accidents. However, if such complications occur, access to the maxillary sinus is the best treatment option.

Atresia maxilar em adultos: simplificação da técnica cirúrgica

A expansão rápida da maxila cirurgicamente assistida (ERMCA) é realizada por meio de osteotomias nos pilares da maxila e na sutura palatina mediana, promovendo a correção da deficiência transversa da maxila. Técnicas menos invasivas foram descritas, visando à realização desses procedimentos sob anestesia local, eliminando os custos de internação hospitalar e trazendo maior conforto aos pacientes. A proposta deste trabalho foi discutir os aspectos envolvidos na simplificação da técnica da ERMCA sob anestesia local por meio do relato de caso clínico-cirúrgico de paciente com 27 anos de idade. Conclui-se que o diagnóstico por meio da avaliação clínica e dos modelos de estudo é essencial para a indicação da ERMCA e esse procedimento proporciona boa previsibilidade na correção da deficiência transversal, com mínima morbidade. Além disso, a utilização de uma técnica minimamente invasiva é efetiva no tratamento de maxilas atrésicas, com índices de recidiva semelhantes aos das técnicas mais invasivas.