Monitoring and repair of an impact damaged prestressed bridge

This paper details the monitoring and repair of an impact damaged prestressed concrete bridge. The repair was required following an impact from a low-loader carrying an excavator while passing underneath the bridge. The repair was carried out by preloading the bridge in the vicinity of the damage to relieve some prestressing. This preload was removed following the hardening and considerable strength gain of the repair material. The true behaviour of damaged prestressed concrete bridges during repair is difficult to estimate theoretically due to lack of benchmarking and inadequacy of assumed damage models. A network of strain gauges at locations of interest was thus installed during the entire period of repair. Effects of various activities were qualitatively and quantitatively observed. The interaction and rapid, model-free calibration of damaged and undamaged beams, including identification of damaged gauges were also probed. This full scale experiment is expected to be of interest and benefit to the practising engineer and the researcher alike.

Direct Contact as a Moderator of Extended Contact Effects: Cross-Sectional and Longitudinal Impact on Outgroup Attitudes, Behavioral Intentions, and Attitude Certainty

Cross-group friendships (the most effective form of direct contact) and extended contact (i.e., knowing ingroup members who have outgroup friends) constitute two of the most important means of improving outgroup attitudes. Using cross-sectional and longitudinal samples from different intergroup contexts, this research demonstrates that extended contact is most effective when individuals live in segregated neighborhoods having only few, or no, direct friendships with outgroup members. Moreover, by including measures of attitudes and behavioral intentions the authors showed the broader impact of these forms of contact, and, by assessing attitude certainty as one dimension of attitude strength, they tested whether extended contact can lead not only to more positive but also to stronger outgroup orientations. Cross-sectional data showed that direct contact was more strongly related to attitude certainty than was extended contact, but longitudinal data showed both forms of contact affected attitude certainty in the long run.

Buckling/post-buckling strength of friction stir welded aircraft stiffened panels

Assembling aircraft stiffened panels using friction stir welding offers potential to reduce fabrication time in comparison to current mechanical fastener assembly, making it economically feasible to select structurally desirable stiffener pitching and novel panel configurations. With such a departure from the traditional fabrication process, much research has been conducted on producing strong reliable welds, with less examination of the impact of welding process residual effects on panel structural behaviour and the development of appropriate design methods. This article significantly expands the available panel level compressive strength knowledge, demonstrating the strength potential of a welded aircraft panel with multiple lateral and longitudinal stiffener bays. An accompanying computational study has determined the most significant process residual effects that influence panel strength and the potential extent of panel degradation. The experimental results have also been used to validate a previously published design method, suggesting accurate predictions can be made if the conventional aerospace design methods are modified to acknowledge the welding altered panel properties.

The influence of assembly friction stir weld location on wing panel static strength

Finite Element simulations and mechanical tests are undertaken to assess the impact of weld joint location on stiffened panel static strength. An upper wing cover panel, with a manufacturing process of welding multiple near-net-shape multi-stiffener extrusions with a final net-shape machining phase is investigated. The 7000 series aluminium alloy extrusions and skin bay longitudinal friction stir butt welds are examined. Geometric imperfections exhibit the greatest influence on panel collapse, thus for static strength design the selection of weld joint location should minimise imperfection generation. Moreover the analysis demonstrates limited impact on panel collapse strength when an optimised welding process is employed. © 2013 Elsevier Ltd. All rights reserved.

The impact of foreign postings on accompanying military spouses: an ethnographic study

As part of an ethnographic study, the impact of foreign postings on spouses who accompany military personnel was explored. Individual interviews and focus groups with 34 British military spouses based in one location in southern Europe were conducted. Key findings suggested that reaction to a foreign posting was a reflection of personal attitudes, prior experiences, support, ability to adjust to change and strength of relationship with the serving spouse and community. For many the experience was positive due to the increased opportunity for family time, for others this helped to compensate for the difficulties experienced. Some military spouses experienced significant distress on the posting, particularly if the family was not well-supported. The potential implications of military spouses not adapting to foreign postings have significant implications for healthcare practice. Provision of more appropriate support resources before and during the posting would facilitate the transition for the military spouse and their family.

Light and electron microscopy of microstructure and fractography of an ultrahigh-strength martensitic steel

Microstructure, tensile properties and fractography have been examined in the oil-quenched samples of a low-alloy ultrahigh strength 4340 steel. Intergranular fracture was revealed to locate at the fracture origin. However, neither the quenched Charpy V-notched impact samples nor the tempered tensile samples showed such intergranular fracture behavior. The effects of loading rate and precipitation are discussed.

Predicting low velocity impact damage and Compression-After-Impact (CAI) behaviour of composite laminates

Low-velocity impact damage can drastically reduce the residual strength of a composite structure even when the damage is barely visible. The ability to computationally predict the extent of damage and compression-after-impact (CAI) strength of a composite structure can potentially lead to the exploration of a larger design space without incurring significant time and cost penalties. A high-fidelity three-dimensional composite damage model, to predict both low-velocity impact damage and CAI strength of composite laminates, has been developed and implemented as a user material subroutine in the commercial finite element package, ABAQUS/Explicit. The intralaminar damage model component accounts for physically-based tensile and compressive failure mechanisms, of the fibres and matrix, when subjected to a three-dimensional stress state. Cohesive behaviour was employed to model the interlaminar failure between plies with a bi-linear traction–separation law for capturing damage onset and subsequent damage evolution. The virtual tests, set up in ABAQUS/Explicit, were executed in three steps, one to capture the impact damage, the second to stabilize the specimen by imposing new boundary conditions required for compression testing, and the third to predict the CAI strength. The observed intralaminar damage features, delamination damage area as well as residual strength are discussed. It is shown that the predicted results for impact damage and CAI strength correlated well with experimental testing without the need of model calibration which is often required with other damage models.

Tensile and impact properties of low nickel maraging steel

This short communication presents a research update of a new low nickel maraging steel, Fe–12.94%Ni–1.61%Al–1.01%Mo–0.23%Nb (wt%). Its yield stress and the tensile strength are 1080 MPa and 1180 MPa, respectively, after ageing treatment. Tensile specimens show ductile fracture. Fractography demonstrated deep dimples. Impact energy is 22 J on half-size specimens.

Electron-impact excitation of Ar 2+

Context: Emission from Ar III is seen in planetary nebulae, in H II regions, and from laboratory plasmas. The analysis of such spectra requires accurate electron impact excitation data. Aims: The aim of this work is to improve the electron impact excitation data available for Ar2+, for application in studies of planetary nebulae and laboratory plasma spectra. The effects of the new data on diagnostic line ratios are also studied. Methods: Electron-impact excitation collision strengths have been calculated using the R-Matrix Intermediate-Coupling Frame-Transformation method and the R-Matrix Breit-Pauli method. Excitation cross sections are calculated between all levels of the configurations 3s^23p^4, 3s3p^5, 3p^6, 3p^53d, and 3s^23p^3nl (3d ≤ nl ≤ 5s). Maxwellian effective collision strengths are generated from the collision strength data. Results: Good agreement is found in the collision strengths calculated using the two R-Matrix methods. The collision strengths are compared with literature values for transitions within the 3s^23p4 configuration. The new data has a small effect on Te values obtained from the I(λ7135 Å+ λ7751 Å)/ I(λ5192 Å) line ratio, and a larger effect on the Ne values obtained from the I(λ7135 Å)/I(λ9 μm) line ratio. The final effective collision strength data is archived online.

Effects of dietary restraint and oral contraceptives on bone strength and bone turnover in young women

ABSTRACT Introduction The purpose of this study was to assess specific osteoporosis-related health behaviours and physiological outcomes including daily calcium intake, physical activity levels, bone strength, as assessed by quantitative ultrasound, and bone turnover among women between the ages of 18 and 25. Respective differences on relevant study variables, based on dietary restraint and oral contraceptive use were also examined. Methods One hundred women (20.6 ± 0.2 years of age) volunteered to participate in the study. Informed written consent was obtained by all subjects prior to participation. The study and all related procedures were approved by the Brock University Research Ethics Board. Body mass, height, relative body fat, as well as chest, waist and hip circumferences were measured using standard procedures. The 10-item restrained eating subscale of the Dutch Eating Behaviour Questionnaire (DEBQ) was used to assess dietary restraint (van Strien et al., 1986). Daily calcium intake was assessed by the Rapid Assessment Method (RAM) (Hertzler & Frary 1994). Weekly physical activity was documented by the 4-item Godin Leisure-Time Exercise Questionnaire (Godin & Shephard 1985). Bone strength was determined from the speed of sound (SOS) as measured by QUS (Sunlight 7000S). SOS measurements (m/s) were taken of the dominant and non-dominant sides of the distal one third of the radius and the mid-shaft of the tibia. Resting blood samples were collected from all subjects between 9am and 12pm, in order to evaluate the impact of lifestyle factors on biochemical markers of bone turnover. Blood was collected during the early follicular phase of the menstrual cycle (approximately days 1-5) for all subjects. Samples were centrifliged and the serum or plasma was aliquoted into separate tubes and stored at -80°C until analysis. The bone formation markers measured were Osteocalcin (OC), bone specific alkaline phosphatase (BAP) and 25-OH vitamin D. The bone resorption markers measured were the carboxy (CTx) and amino (NTx) terminal telopeptides of type-I collagen crosslinks. All markers were assessed by ELISA. Subjects were divided into high (HDR) and low dietary restrainers (LDR) based on the median DEBQ score, and also into users (BC) and non-users (nBC) of oral contraceptives. A series of multiple one way ANOVA's were then conducted to identify differences between each set of groups for all relevant variables. A two-way ANOVA analysis was used to explore significant interactions between dietary restraint and use of oral contraceptives while a univariate follow-up analysis was also performed when appropriate. Pearson Product Moment Correlations were used to determine relationships among study variables. Results HDR had significantly higher BMI, %BF and circumference measures but lower daily calcium intake than LDR. There were no significant differences in physical activity levels between HDR and LDR. No significant differences were found between BC and nBC in body composition, calcium intake and physical activity. HDR had significantly lower tibial SOS scores than LDR in both the dominant and non-dominant sites. The post-hoc analysis showed that within the non-birth control group, the HDR had significantly lower tibial SOS scores of bone strength when compared to the LDR but Aere were no significant differences found between the two dietary restraint groups for those currently on birth control. HDR had significantly lower levels of OC than LDR and the BC group had lower levels of BAP than the nBC group. Consistently, the follow-up analysis revealed that within those not on birth control, subjects who were classified as HDR had significantly (f*<0.05) lower levels of OC when compared with LDR but no significant differences were observed in bone turnover between the two dietary restraint groups for those currently on birth control. Physical activity was not correlated with SOS scores and bone turnover markers possibly due to the low physical activity variability in this group of women. Conclusion This is the first study to examine the effects of dietary restraint on bone strength and turnover among this population of women. The most important finding of this study was that bone strength and turnover are negatively influenced by dietary restraint independent of relative body fat. In general, the results of the present thesis suggest that dietary restraint, oral contraceptive use, as well as low daily calcium intake and low physical activity levels were widespread behaviours among this population of college-aged women. The young women who were using dietary restraint as a strategy to lose weight, and thus were in the HDR group, despite their higher relative body fat and weight, had lower scores of bone strength and lower levels of markers of bone turnover compared to the low dietary restrainers. Additionally, bone turnover seemed to be negatively affected by oral contraceptives, while bone strength, as assessed by QUS, seemed unaffected by their use in this population of young women. Physical activity (weekly energy expenditure), on the other hand, was not associated with either bone strength or bone tiimover possibly due to the low variability of this variable in this population of young Canadian women.

The impact of tobacco control policies on university students' smoking in Ontario

Objective. Despite steady declines in the prevalence of tobacco use among Canadians, young adult tobacco use has remained stubbornly high over the past two decades (CTUMS, 2005a). Currently in Ontario, young adults have the highest proportion of smokers of all age cohorts at 26%. A growing body of evidence shows that smoking restrictions and other tobacco control policies can reduce tobacco use and consumption among adults and deter initiation among youth; whether young adult university students' smoking participation is influenced by community smoking restrictions, campus tobacco control policies or both remains an empirical question. The purpose of this study is to examine the relationship among current smoking status of students on university campuses across Ontario and various tobacco control policies, 3including clean air bylaws of students' home towns, clean air by-laws of the community where the university is situated, and campus policies. Methods. Two data sets were used. The 200512006 Tobacco Use in a Representative Sample of Post-Secondary Students data set provides information about the tobacco use of 10,600 students from 23 universities and colleges across Ontario. Data screening for this study reduced the sample to 5,114 17-to-24 year old undergraduate students from nine universities. The second data set is researcher-generated and includes information about strength and duration of, and students' exposure to home town, local and campus tobacco control policies. Municipal by-laws (of students' home towns and university towns) were categorized as weak, moderate or strong based on criteria set out in the Ontario Municipal By-law Report; campus policies were categorized in a roughly parallel fashion. Durations of municipal and campus policies were calculated; and length of students' exposure to the policies was estimated (all in months). Multinomial logistic regression analyses were used to examine the relationship between students' current smoking status (daily, less-than-daily, never-smokers) and the following policy measures: strength of, duration of, and students' exposure to campus policy; strength of, duration of, and students' exposure to the by-law in the university town; and, strength of, duration of, and students' exposure to the by-law in the home town they grew up in. Sociodemographic variables were controlled for. Results. Among the Ontario university students surveyed, 7.0% currently use tobacco daily and 15.4% use tobacco less-than-daily. The proportions of students experiencing strong tobacco control policies in their home town, the community in which their university is located and at their current university were 33.9%,64.1 %, and 31.3% respectively. However, 13.7% of students attended a university that had a weak campus policy. Multinomial logistic regressions suggested current smoking status was associated with university town by-law strength, home town by-law strength and the strength of the campus tobacco control policy. In the fmal model, after controlling for sociodemographic factors, a strong by-law in the university town and a strong by-law in students' home town were associated with reduced odds of being both a less-than-daily (OR = 0.64, 95%CI: 0.48-0.86; OR = 0.80, 95%CI: 0.66-0.95) and daily smoker (OR = 0.59, 95%CI: 0.39-0.89; OR = 0.76, 95%CI: 0.58-0.99), while a weak campus tobacco control policy was associated with higher odds of being a daily smoker (OR = 2.08, 95%CI: 1.31-3.30) (but unrelated to less-than-daily smoking). Longer exposure to the municipal by-law (OR = 0.93; 95%CI: 0.90-0.96) was also related to smoking status. Conclusions. Students' smoking prevalence was associated with the strength of the restrictions in university, and with campus-specific tobacco control policies. Lessthan- daily smoking was not as strongly associated with policy measures as daily smoking was. University campuses may wish to adopt more progressive campus policies and support clean air restrictions in the broader community. More research is needed to determine the direction of influence between tobacco control policies and students' smoking.

The effect of a segmental, localized lower limb cooling protocol on muscular strength and balance

The human neuromuscular system is susceptible to changes within the thermal environment. Cold extrinsic temperatures can significantly reduce muscle and nervous system function and communication, which can have consequences for motor performance. A repeated measures design protocol exposed participants to a 12°C cold water immersion (CWI) up to the ankle, knee, and hip to determine the effect that reduced skin and muscle temperature had on balance and strength task execution. Although a linear reduction in the ability to perform balance tasks was seen from the control condition through to the hip CWI, results from the study indicated a significant reduction in dynamic balance (Star Excursion Balance Test reach distance) performance from only the hip CWI (P<0.05). This reduced performance could have been due to an increase in joint stiffness, increased agonist-antagonist co-contraction, and/or reduced isokinetic muscular strength. Reduced physical performance due to cold temperature could negatively impact outdoor recreational athletics.

Maternal High Fat Feeding: Impact of Female Offspring Body Composition and Bone Health

High fat diet (HFD) consumption in rodents alters body composition and weakens bones. Whether female offspring of mothers consuming a HFD are similarly affected at weaning and early adulthood is unclear. This research determined whether maternal HFD contributes to long-lasting alterations in body composition and bone health of female offspring. Rats were fed control or HFD for 10 weeks prior to and throughout pregnancy and lactation. Female offspring were studied at weaning or 3 months of age (consumed control diet). Main findings in female offspring: maternal HFD decreased lean mass, increased fat mass and femoral BMD at weaning, but not at 3 months; weanling femoral lipid composition reflected maternal diet, persisting to 3 months of age (decreased total and n6 polyunsaturates, increased saturates); and no differences in femoral strength at 3 months. In summary, 3 month old female offspring have similar body composition and bone health regardless of maternal diet.

Impact de l’anémie postopératoire sur la récupération fonctionnelle et la qualité de vie après une arthroplastie de la hanche ou du genou

Les transfusions sanguines sont fréquemment employées pour corriger l’anémie secondaire à une arthroplastie de la hanche ou du genou. Il n’y a cependant pas consensus sur les indications de transfuser. La tendance actuelle est d’utiliser une stratégie transfusionnelle restrictive (soit un seuil de 75-80 g/L d’hémoglobine) mais les conséquences d’une telle pratique sur la récupération fonctionnelle et la qualité de vie des patients sont mal connues. Dans un premier temps, nous avons caractérisé la pratique transfusionnelle au Centre hospitalier de l’Université de Montréal (CHUM). Notre hypothèse était que, devant l’imprécision des recommandations, la pratique transfusionnelle serait variable. Une étude rétrospective de 701 dossiers de patients ayant subi une arthroplastie de la hanche ou du genou a été réalisée. Nous avons observé que les transfusions étaient utilisées de la même façon dans les trois hôpitaux et que les médecins basaient leur décision de transfuser principalement sur un seul chiffre, la concentration d’hémoglobine, adoptant une stratégie restrictive. Soixante-six pourcent des patients avaient une concentration d’hémoglobine inférieure à 100 g/L au départ de l’hôpital. Dans un deuxième temps, nous avons évalué l’impact de cette anémie postopératoire sur la récupération fonctionnelle et la qualité de vie des patients. Notre hypothèse était qu’il existe une concentration d’hémoglobine en dessous de laquelle celles-ci sont atteintes. Une étude de cohorte prospective et observationnelle a été menée chez 305 patients regroupés selon leur concentration d’hémoglobine postopératoire. Les groupes d’hémoglobine (≤ 80, 81-90, 91-100 et > 100 g/L) étaient similaires dans l’évolution de la distance de marche en six minutes, de l’évaluation de l’effort fourni, de la force de préhension et des scores de qualité de vie. L’anémie modérée n’est donc pas associée à une atteinte de la récupération fonctionnelle et de la qualité de vie à court terme. D’autres études devront déterminer les conséquences à long terme d’une stratégie transfusionnelle restrictive sur ces patients.

Development of an instrument to assess Human Resource Quality (HRQ) and measuring the impact of TQM efforts on HRQ using the instrument

This research is aimed at developing an instrument for measuring human resource quality in organizations. The researcher has developed the instrument for measuring HRQ based on extensive literature survey and expert opinion. Statistical validity of the Instrument has also been established. This instrument was used to measure the changes in Human Resource Quality in selected organizations wherein quality management practices are being implemented. Data collected was analyzed and presented in this thesis. It has been found that there are significant changes in all the indicators of Human Resource Quality. There is improvement in Cultural Change Index(CCI), Quality of Work Life Index(QWLI) and Employee Satisfaction Index(ESI). The Human Resource Quality index has also increased significantly in all the organizations. It has been observed from the study that implementation of TQM leads to significant changes in Human Resource Quality. This instrument is capable of measuring minor variations in each indicator of HRQ and can be used to identify areas of weakness and strength in the case of Human Resource Quality. The instrument can further be modified by future research. This research work provided excellent opportunities for the researcher for self-development and has made him confident to undertake such activities for the benefit of the learning community.