Unexpectedly superior enantioselectivity for trans-stilbene cis-dihydroxylation over anchored triosmium carbonyl species in confined Al-MCM-41 channels

Superior enantioselectivity in the dihydroxylation of trans-stilbene catalysed by anchored triosmium carbonyl species without using a chiral modifier is observed inside sterically congested MCM-41 channels; this effect is more pronounced through the introduction of surface Al sites into the silicate.

Heterogenisation of Os species on MCM-41 structure for epoxidation of trans-stilbene

Metal organic chemical vapour deposition technique (MOCVD) has been used to immobilise Os species onto the internal porous structure of MCM-41. Evidence suggests that volatile Os-3(CO)(12) cluster reacts with surface silanol groups of the MCM-41 via an oxidative addition reaction to yield a trinuclear HOs3(CO)(10)(OSi-) surface species. After heat treatment in air or at their very low surface coverage, these triangular sites break up to partially oxidised mononuclear surface species. In the presence of tert-butyl hydroperoxide (TBHP) as an oxidant, we demonstrate that the mononuclear species form extremely active species that catalyse the oxidation of trans-stilbene selectively to the corresponding epoxide. By carefully controlling the parameters of the MOCVD method (loading and calcination temperature), we report a new class of optimised MCM-41 porous heterogeneous catalysts carrying isolated but active Os sites for the selective oxidation of trans-stilbene in liquid phase. The reaction selectivity of the solid supported Os is apparently higher than the soluble homogeneous Os-3(CO)(12) cluster. It is envisaged that our solid supported catalysts not only facilitate separation from products but also offer an excellent utilisation of Os for catalysis. (C) 2003 Elsevier Science B.V. All rights reserved.

A method of synthesis of silicious inorganic ordered materials (MCM-41-SBA-1) employing polyacrylic acid-C(n)TAB-TEOS nanoassemblies

In this work we describe the synthesis of a variety of MCM-41 type hexagonal and SBA-1 type cubic mesostructures and mesoporous silicious materials employing a novel synthesis concept based on polyacrylic acid (Pac)-C(n)TAB complexes as backbones of the developing structures. The ordered porosity of the solids was established by XRD and TEM techniques. The synthesis concept makes use of Pac-C(n)TAB nanoassemblies as a preformed scaffold, formed by the gradual increase of pH. On this starting matrix the inorganic precursor species SiO2 precipitate via hydrolysis of TEOS under the influence of increasing pH. The molecular weight (MW) of Pac, as well as the length of carbon chain in C,TAB, determine the physical and structural characteristics of the obtained materials. Longer chain surfactants (C(16)TAB) lead to the formation of hexagonal phase, while shorter chain surfactants (C(14)TAB, C(12)TAB) favor the SBA-1 phase. Lower MW of Pac (approximate to2000) leads to better-organized structures compared to higher MW ( 450,000), which leads to worm-like mesostructures. Cell parameters and pore size increase with increasing polyelectrolyte and/or surfactant chain, while at the same time SEM photography reveals that the particle size decreases. Conductivity experiments provide some insight into the proposed self-assembling pathway. (C) 2003 Elsevier Inc. All rights reserved.

Association of the PPARGC1A gene polymorphism with diabetic nephropathy in an Asian Indian population (CURES-41)

BACKGROUND: The aim of this study was to evaluate the association of polymorphisms of the peroxisome proliferator-activated receptor gamma (PPARG) gene and peroxisome proliferators-activated receptor gamma co-activator 1 alpha (PPARGC1A) gene with diabetic nephropathy (DN) in Asian Indians. METHODS: Six common polymorphisms, 3 of the PPARG gene [-1279G/A, Pro12Ala, and His478His (C/T)] and 3 of the PPARGC1A gene (Thr394Thr, Gly482Ser, and +A2962G) were studied in 571 normal glucose-tolerant (NGT) subjects, 255 type 2 diabetic (T2D) subjects without nephropathy, and 141 DN subjects. Genotypes were determined by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) and direct sequencing. Logistic regression analysis was performed to assess the covariables associated with DN. RESULTS: Among the 6 polymorphisms examined, only the Gly482Ser of the PPARGC1A gene was significantly associated with DN. The genotype frequency of Ser/Ser genotype of the PPARGC1A gene was 8.8% (50/571) in NGT subjects, 7.8% (20/255) in T2D subjects, and 29.8% (42/141) in DN subjects. The odds ratios (ORs) for DN for the susceptible Gly/Ser and Ser/Ser genotype after adjusting for age, sex, body mass index, and duration of diabetes were 2.14 [95% confidence interval (CI), 1.23-3.72; P = 0.007] and 8.01 (95% CI, 3.89-16.47; P < 0.001), respectively. The unadjusted OR for DN for the XA genotype of the Thr394Thr polymorphism was 1.87 (95% CI, 1.20-2.92; P = 0.006) compared to T2D subjects. However, the significance was lost (P = 0.061) when adjusted for age, sex, BMI, and duration of diabetes. The +A2962G of PPARGC1A and the 3 polymorphisms of PPARG were not associated with DN. CONCLUSION: The Gly482Ser polymorphism of the PPARGC1A gene is associated with DN in Asian Indians.

Covalent attachment of 3,4,9,10-perylenediimides onto the walls of mesoporous molecular sieves MCM-41 and SBA-15

This work describes the covalent grafting of 3,4,9,10-perylenediimides (PDI), which are fluorescent dyes with very interesting optical properties, onto the walls of mesoporous molecular sieves MCM-41 and SBA-15. The mesoporous materials were first treated with 3-aminopropyltriethoxysilane (APTES) in anhydrous toluene, generating amine-containing surfaces. The amine-containing materials were then reacted with 3,4,9,10-perylenetetracarboxylic dianhydride (PTCA), generating surface-grafted PDI. Infrared spectra of the materials showed that the reaction with amino groups took place at both anhydride ends of the PTCA molecule, resulting in surface attached diimides. No sign of unreacted anhydride groups were found. The new materials, designated as MCMN2PDI and SBAN(2)PDI, presented absorption and emission spectra corresponding to weakly coupled PDI chromophores, in contrast to the strongly coupled rings usually found in solid PDI samples. The materials showed a red fluorescence, which could be observed by the naked eye under UV irradiation or with a fluorescence microscope. The PDI-modified mesoporous materials showed electrical conductivity when pressed into a pellet. The results presented here show that the new materials are potentially useful in the design of nanowires. (C) 2007 Elsevier Inc. All rights reserved.

IAS 40 ur ett Nordenperspektiv : Jämförelse av regelverkets efterlevnad 2014 jämfört med 2009

Börsnoterade bolag ska i sin koncernredovisning redovisa enligt IFRS och förvaltningsfastigheter skall redovisas enligt IAS 40 Förvaltningsfastigheter. Detta examensarbete undersöker hur Nordiska börsnoterade bolag tillämpar vissa punkter inom IAS 40 i 2014 års redovisning jämfört med 2009 års redovisning. Syftet med undersökningen är att undersöka skillnader mellan de granskade företagens redovisning 2014 och 2009, med utgångspunkten i en tidigare publicerad undersökning (Hedlund & Ersson, 2011). Det som undersöks är om företagen använder samma värderingsmetod, om de informerar om hur värdering av förvaltningsfastigheter skett, om var i resultatrapporten de rapporterar justeringar av verkligt värde samt hur väl de lämnar upplysningar enligt IAS 40 punkt 75. Undersökningen har skett med en kvantitativ metod då det är årsredovisningar som granskats. Undersökt data är årsredovisningar från 2014 och 2009 för samma företag som granskats i den tidigare undersökningen. Några företag har utgått då de inte ingår i urvalsramen Nordiskt börsnoterat fastighetsbolag. Totalt granskades 14 stycken företag. Resultatet visar att efterlevnaden totalt sett är något bättre 2014 jämfört med den tidigare undersökningen. Till stor del beror det på urvalet där de företag som utgått var dåliga på att lämna upplysningar enligt IAS 40 i 2009 års redovisning. Sett till de företag som är med i båda undersökningarna är efterlevnaden likartad de jämförda åren. Det är få företag som lämnar upplysningar om begränsningar i rätten att sälja förvaltningsfastigheter, avtalsenliga förpliktelser att köpa eller hur de skiljer på rörelsefastigheter och förvaltningsfastigheter. Tolkningen kan då göras att det inte finns någon restriktion eller förpliktelse om det inte lämnas några sådana upplysningar. Om det är ett fastighetsbolag så kan det tolkas som att de inte har några rörelsefastigheter. Med dessa tolkningar blir efterlevnaden bland de undersökta företagen god.

Associação de diferentes doses de gonodotrofina coriônica equina (eCG) no tratamento com progestágenos e estrógenos em vacas de corte .

Dois experimentos foram realizados com o objetivo de verificar o efeito de diferentes doses de eCG, após tratamento com progestágeno e estrógeno, sobre a fertilidade de vacas de corte. No experimento 1 foram utilizadas 133 vacas tipo Braford (½ Nelore x ½ Hereford), multíparas, 150 a 155 dias pós-parto, com idades entre 4 e 6 anos e escore de condição corporal (ECC) médio de 3 (escala de 1-5). Todos os animais foram submetidos a colocação de implante auricular subcutâneo (dia 0) contendo 3 mg de norgestomet (N) e aplicação de solução injetável intramuscular (im) de 3 mg de N e 5 mg de valerato de estradiol (VE). No momento da retirada do implante (dia 10), as vacas foram separadas, aleatoriamente, em 4 grupos distintos: Grupo I (n=33): não recebeu eCG; Grupo II (n=34): 300 UI de eCG; Grupo III: 500 UI de eCG e Grupo IV: 700 UI de eCG. As inseminações artificiais (IAs) foram realizadas em tempo fixo, de 52-54 hs após a retirada do implante, com sêmen de qualidade comprovada através de avaliação prévia. Após 15 dias, as fêmeas permaneceram com touros por 45 dias afim de serem submetidas a monta natural (MN) caso retornassem ao estro. Aos 40 e 100 dias após a IA foi realizado, mediante palpação retal, o diagnóstico de gestação para identificação dos animais que conceberam por IA ou MN respectivamente. As taxas de prenhez da IA foram: Grupo I: 33.3% (11/33); Grupo II: 50,0%(17/34); Grupo III: 39,4% (13/33); Grupo IV: 45,5% (15/33). Para a análise estatística das variáveis foi utilizado o teste Qui-Quadrado. As taxas de prenhez não foram diferentes estatisticamente (p=0,539) em relação a dose de eCG utilizada. As taxas de prenhez totais, após a temporada de MN, foram: Grupo I: 78,8% (26/33); Grupo II: 79,4% (27/34); Grupo III: 90,9% (30/33); Grupo IV: 75,8% (25/33). Também não houve diferença estatística (p=0,411) entre os grupos. No Experimento 2, foram utilizadas 56 vacas ( 27 Nelore x Charolês e 26 Braford), multíparas, não lactantes, cíclicas, com idades variando entre 4 e 7 anos e ECC médio de 3,5. As fêmeas receberam aplicação de implante auricular subcutâneo de 3 mg N e aplicação injetável (im) de 3 mg de N e 5 mg de VE no momento da colocação do implante (dia 0). No momento da retirada do implante (dia 10) os animais foram divididos em 3 grupos com a finalidade de receber aplicação injetável (im) de eCG: Grupo I (n=18): 500 UI eCG; Grupo II (n=19): 1.000 UI eCG e Grupo III (n=19): 1.200 UI eCG. A partir do dia seguinte à retirada do implante e aplicação de eCG, os animais tiveram o estro controlado, duas vezes ao dia em intervalos de 12 hs. As IAs foram realizadas 12 hs após a identificação do estro. Nos animais em que o estro não foi identificado, realizou-se IA em tempo fixo de 52-54 hs após a retirada do implante. O diagnóstico de gestação foi realizado mediante palpação retal aos 45 dias após a IA. Os animais diagnosticados prenhes foram acompanhados durante o período de parição com o propósito de avaliar o número de produtos nascidos, já que foram utilizadas altas doses de eCG que poderiam originar nascimentos múltiplos. Através do Qui-Quadrado, primeiramente analisou-se a presença dos sinais de estro em relação a dose de eCG utilizada a cada grupo. No intervalo de 36 a 48 hs após a retirada do implante, 87,5% do animais apresentaram estro. Não houve diferença significativa (p=0,866) entre os grupos, indicando ausência de relação entre estro e dose de eCG utilizada. As taxas de prenhez obtidas em cada grupo também não resultaram diferentes (p=0,25) em função da dosagem de eCG utilizada. Grupo I: 44,4% (8/18); Grupo II: 36,8% (7/19), Grupo III: 63,2% (12/19). Os índices de prenhez dos animais que não demonstraram sinais de estro e que foram inseminados em tempo fixo, foram analisados mediante Regressão Logística e não diferiram (p=0,666) daqueles que foram inseminados 12 hs após a detecção do estro. Não foram observados partos gemelares e distocia nas vacas dos diferentes grupos experimentais. Nas condições de realização destes experimentos, o uso de eCG, ao final do tratamento com progestágenos e estrógenos, não interferiu nos resultados de prenhez em vacas não-lactantes ou lactantes, inseminadas 12 hs após o estro ou em tempo fixo, não demonstrou efeito sobre o aparecimento de estro em vacas solteiras e, nas doses utilizadas, não originou partos gemelares. A IA de vacas não-lactantes realizada em tempo fixo de 52-54 hs após o tratamento apresentou resultados de prenhez semelhantes aos observados nas IAs realizadas 12 após a identificação do estro.

Síntese e impregnação de peneiras moleculares Fe MCM-41 derivada de sílica da casca do arroz

The mesoporous molecular sieves of the MCM-41 and FeMCM-41 type are considered promissory as support for metals used as catalysts in oil-based materials refine processes and as adsorbents for environmental protection proposes. In this work MCM-41 and FeMCM41 were synthesized using rice husk ash - RHA as alternative to the conventional silica source. Hydrothermal synthesis was the method chosen to prepare the materials. Pre-defined synthesis parameters were 100°C for 168 hours, later the precursor was calcinated at 550°C for 2 hours under nitrogen and air flow. The sieves containing different proportions of iron were produced by two routes: introduction of iron salt direct synthesis; and a modification post synthesis consisting in iron salt 1 % and 5% impregnation in the material followed by thermal decomposition. The molecular sieves were characterized by X ray diffraction XRD, Fourier transform infrared spectroscopy FT-IR, X ray fluorescence spectroscopy XFR, scanning electronic microscopy SEM, specific surface area using the BET method, Termogravimetry TG. The kinetic model of Flynn Wall was used with the aim of determining the apparent activation energy of the surfactant remove (CTMABr) in the MCM- 41 porous. The analysis made possible the morphology characterization, identifying the presence of hexagonal structure typical for mesoporous materials, as well as observation of the MCM41 and iron of characteristic bands.

Síntese e caracterização de peneiras moleculares mesoporosas do tipo MCM-41 e AlMCM-41 a partir de fontes alternativas de sílica e de alumínio

The mesoporous molecular sieves of MCM-41 and AlMCM-41 type are considered as promising support for metal in the refining processes of petroleum-based materials as catalysts and adsorbents for environmental protection. In this work the molecular sieves MCM-41 and AlMCM-41 were synthesized by replacing the source of silica conventionally used, for quartz, an alternative and abundant, and the use of waste from the production of diatomaceous earth, an aluminum-silicate, as a source aluminum, due to abundant reserves of diatomaceous earth in the state of Rio Grande do Norte in the city of Ceará-Mirim, with the objective of producing high-value materials that have similar characteristics to traditional commercial catalysts in the market. These materials were synthesized by the method of hydrothermal synthesis at 100 º C for 7 days and subjected to calcination at 500 º C for 2 hours under flow of nitrogen and air. The molecular sieves were characterized by X-ray diffraction (XRD), differential thermal analysis (DTA) and thermogravimetric analysis (TG), adsorption of N2 (BET and BJH methods), spectroscopy in the infra red (FTIR), microscopy scanning electron (SEM) and transmission electron microscopy (TEM). The analysis indicated that the synthesized materials showed characteristic hexagonal structure of mesopores materials with high specific surface area and sort and narrow distribution of size of pores

Preparação e caracterização de catalisadores à base de titânio suportado em MCM-41 para produção de compostos oxigenados através da pirólise catalítica do capim elefante

In recent years, the area of advanced materials has been considerably, especially when it comes to materials for industrial use, such as is the case with structured porosity of catalysts suitable for catalytic processes. The use of catalysts combined with the fast pyrolysis process is an alternative to the oxygenate production of high added value, because, in addition to increasing the yield and quality of products, allows you to manipulate the selectivity to a product of interest, and therefore allows greater control over the characteristics of the final product. Based on these arguments, in this work were prepared titanium catalysts supported on MCM-41 for use in catalytic pyrolysis of biomass, called elephant grass. The reactions of pyrolysis of biomass were performed in a micro pyrolyzer, Py-5200, coupled to GC / MS, the company CDS Corporation, headquartered in the United States. The catalysts Ti-MCM-41 in different molar ratios were characterized by XRD, TG / DTG, FT-IR, SEM, XRF, UV-visible adsorption of nitrogen and the distribution of particle diameter and specific surface area measurement by the BET method. From the catalytic tests it was observed that the catalysts synthesized showed good results for the pyrolysis reaction.The main products were obtained a higher yield of aldehydes, ketones and furan. It was observed that the best reactivity is a direct function of the ratio Si/Ti, nature and concentration of the active species on mesoporous supports. Among the catalysts Ti-MCM-41 (molar ratio Si / Ti = 25 and 50), the ratio Si / Ti = 25 (400 ° C and 600 ° C) favored the cracking of oxygenates such as acids , aldehydes, ketones, furans and esters. Already the sample ratio Si / Ti = 50 had the highest yield of aromatic oxygenates

Reforma a seco de metano com catalisadores Ni/MCM-41 sintetizados a partir de fontes alternativas de sílica

The production of synthesis gas has received renewed attention due to demand for renewable energies to reduce the emissions of gases responsible for enhanced greenhouse effect. This work was carried out in order to synthesize, characterize and evaluate the implementation of nickel catalysts on MCM-41 in dry reforming reactions of methane. The mesoporous molecular sieves were synthesized using as silica sources the tetraethyl orthosilicate (TEOS) and residual glass powder (PV). The sieves were impregnated with 10% nickel to obtain the metallic catalysts (Ni/MCM-41). These materials were calcined and characterized by Thermogravimetric Analysis (TG), Infrared spectroscopy (FTIR), X-ray Diffraction (XRD), Temperature-Programmed Reduction (TPR) and N2 Adsorption/Desorption isotherms (BET/BJH). The catalytic properties of the samples were evaluated in methane dry reforming with CO2 in order to produce synthesis gas to be used in the petrochemical industry. The materials characterized showed hexagonal structure characteristic of mesoporous material MCM-41 type, being maintained after impregnation with nickel. The samples presented variations in the specific surface area, average volume and diameter of pores based on the type of interaction between the nickel and the mesoporous support. The result of the the catalytic tests showed conversions about 91% CO2, 86% CH4, yelds about 85% CO and 81% H2 to Ni/MCM-41_TEOS_C, and conversions about 87% CO2, 82% CH4, yelds about 70% CO and 59% H2 to Ni/MCM-41_PV_C. The similar performance confirms that the TEOS can be replaced by a less noble materials

Degradacao termica e catalitica da borra oleosa de Petroleo com materiais nanoestruturados al-mcm-41 e AL-SBA-15

Aiming to reduce and reuse waste oil from oily sludge generated in large volumes by the oil industry, types of nanostructured materials Al-MCM-41 and Al-SBA-15, with ratios of Si / Al = 50, were synthesized , and calcined solids used as catalysts in the degradation of oily sludge thermocatalytic oil from oilfield Canto do Amaro, in the state of Rio Grande do Norte. Samples of nanostructured materials were characterized by thermogravimetric analysis (TG / DTG), X-ray diffraction (XRD), scanning electron microscopy (SEM), absorption spectroscopy in the infrared Fourier transform (FT-IR) and adsorption nitrogen (BET). The characterization showed that the synthesized materials resulted in a catalyst nanostructure, and ordered pore diameter and surface area according to existing literature. The oily sludge sample was characterized by determining the API gravity and sulfur content and SARA analysis (saturates, aromatics, resins and asphaltenes). The results showed a material equivalent to the average oil with API gravity of 26.1, a low sulfur content and considerable amount of resins and asphaltenes, presented above in the literature. The thermal and catalytic degradation of the oily sludge oil was performed from room temperature to 870 ° C in the ratios of heating of 5, 10 and 20 ° C min-1. The curves generated by TG / DTG showed a more accelerated degradation of oily sludge when it introduced the nanostructured materials. These results were confirmed by activation energy calculated by the method of Flynn-Wall, in the presence of catalysts reduced energy, in particular in the range of cracking, showing the process efficiency, mainly for extraction of lightweight materials of composition of oily sludge, such as diesel and gasoline

Capacidade embriogênica da cultivar IAS-5 de soja

O objetivo deste trabalho foi estudar o controle genético da formação de embriões somáticos da cultivar IAS-5 de soja. O experimento foi conduzido em casa de vegetação, cultivando-se quatro plantas por vaso, sob fotoperíodo de 14 horas e temperatura em torno de 28°C. Efetuaram-se cruzamentos entre os parentais não-embriogênicos (cultivares IAC-6, Paraná e IAC-15) e embriogênico (cultivar IAS-5) e retrocruzamentos para obtenção das gerações F1, F2,RC1P1 e RC1P2. Cotilédones imaturos, com 4-6 mm de comprimento, derivados dos parentais das gerações F1, F2, RC1P1 e RC1P2 foram cultivados em placas de Petri contendo meio N10, por um período de 90 dias, em câmara de crescimento. Os embriões somáticos derivados da indução foram contados, e os números, usados para obtenção dos parâmetros genéticos. Os resultados obtidos mostraram que o caráter capacidade de produção de embriões somáticos da cultivar IAS-5 é de natureza quantitativa e controlado por, aproximadamente, 20 genes.

Síntese, caracterização e aplicação de MCM-41 funcionalizado com diisopropilamina no processo de adsorção do dióxido de carbono

Emissions of CO2 in the atmosphere have increased successively by various mechanisms caused by human action, especially as fossil fuel combustion and industrial chemical processes. This leads to the increase in average temperature in the atmosphere, which we call global warming. The search for new technologies to minimize environmental impacts arising from this phenomenon has been investigated. The capture of CO2 is one of the alternatives that can help reduce emis ions of greenhouse gases. The CO2 can be captured through the process of selective adsorption using adsorbents for this purpose. Were synthesized by hydrothermal method, materials of the type MCM-41 and Al-MCM-41 in the molar ratio Si / Al equal to 50. The synthesis of gels were prepared from a source of silicon, sodium, water and aluminum in the case of Al-MCM-41. The period of synthesis of the materials was 5 days in autoclave at 100°C. After that time materials were filtered, washed and dried in greenhouse at 100 º C for 4 hours and then calcined at 450 º C. Then the calcined material was functionalized with the Di-isopropylamine (DIPA) by the method of wet impregnation. We used 0.5 g of material mesopores to 3.5 mL of DIPA. The materials were functionalized in a closed container for 24 hours, and after this period were dried at brackground temperature for 2 hours. Were subsequently subjected to heat treatment at 250°C for 1 hour. These materials were used for the adsorption of CO2 and were characterized by XRD, FT-IR, BET / BJH, SEM, EDX and TG / DTG. Tests of adsorption of CO2 was carried out under the following conditions: 100 mg of adsorbent, temperature of 75°C under flow of 100 mL/min of CO2 for 2 hours. The desorption of CO2 was carried out by thermogravimetry from ambient temperature to 900ºC under flow of 25 mL min of He and a ratio of 10ºC/min. The difratogramas X-ray for the synthesized samples showed the characteristic peaks of MCM-41, showing that the structure of it was obtained. For samples functionalized there was a decrease of the intensities of these peaks, with a consequent reduction in the structural ordering of the material. However, the structure was preserved mesopores. The adsorption tests showed that the functionalized MCM-41 is presented as a material promising adsorbent, for CO2 capture, with a loss of mass on the desorption CO2 of 7,52%, while that in Al-MCM- 41 functionalized showed no such loss

Síntese, caracterização e aplicação do MCM-41 e A1-MCM-41 na pirólise do resíduo atmosférico de petróleo

In present work, mesoporous materials of the M41S family were synthesized, which were discovered in the early 90s by researchers from Mobil Oil Corporation, thus allowing new perspectives in the field of catalysis. One of the most important members of this family is the MCM-41, which has a hexagonal array of mesopores with pore diameters ranging from 2 to 10 nm and a high surface area, enabling it to become very promising for the use as a catalyst in the refining of oil in the catalytic cracking process, since the mesopores facilitate the access of large hydrocarbon molecules, thereby increasing the production of light products, that are in high demand in the market. The addition of aluminum in the structure of MCM-41 increases the acidity of the material, making it more beneficial for application in the petrochemical industry. The mesoporous materials MCM-41 and Al-MCM-41 (ratio Si / Al = 50) were synthesized through the hydrothermal method, starting with silica gel, NaOH and distilled water. CTMABr was used as template, for structural guiding. In Al-MCM-41 the same reactants were used, with the adding of pseudoboehmite (as a source of aluminum) in the synthesis gel. The syntheses were carried out over a period of four days with a daily adjustment of pH. The optimum conditions of calcination for the removal of the organic template (CTMABr) were discovered through TG / DTG and also through analysis by XRD, FTIR and Nitrogen Adsorption. It was found that both the method of hydrothermal synthesis and calcination conditions of the studies based on TG were promising for the production of mesoporous materials with a high degree of hexagonal array. The acidic properties of the materials were determined by desorption of n-butylamine via thermogravimetry. One proved that the addition of aluminum in the structure of MCM-41 promoted an increase in the acidity of the catalyst. To check the catalytic activity of these materials, a sample of Atmospheric Residue (RAT) that is derived from atmospheric distillation of oil from the Pole of Guamaré- RN was used. This sample was previously characterized by various techniques such as Thermogravimetry, FTIR and XRF, where through thermal analysis of a comparative study between the thermal degradation of the RAT, the RAT pyrolysis + MCM-41 and RAT + Al- MCM-41. It was found that the Al-MCM-41 was most satisfactory in the promotion of a catalytic effect on the pyrolysis of the RAT, as the cracking of heavy products in the waste occurred at temperatures lower than those observed for the pyrolysis with MCM-41, and thereby also decreasing the energy of activation for the process and increasing the rates of conversion of residue into lighter products