Phase separation and gap bowing in zinc-blende InGaN, InAlN, BGaN, and BAlN alloy layers

We present first-principles calculations of the thermodynamic and electronic properties of the zinc-blende ternary InxGa1-xN. InxAl1-xN, BxGa1-xN, and BxAl1-xN alloys. They are based on a generalized quasi-chemical approximation and a pseudopotential-plane-wave method. T-x phase diagrams for the alloys are obtained, We show that due to the large difference in interatomic distances between the binary compounds a significant phase miscibility gap for the alloys is found. In particular for the InxGa1-xN alloy, we show also experimental results obtained from X-ray and resonant Raman scattering measurements, which indicate the presence of an In-rich phase with x approximate to 0.8. For the boron-containing alloy layers we found a very high value for the critical temperature for miscibility. similar to9000 K. providing an explanation for the difficulties encountered to grow these materials with higher boron content. The influence of a biaxial strain on phase diagrams, energy gaps and gap bowing of these alloys is also discussed. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Electronic ballast for multiple fluorescent lamp systems

An electronic ballast for multiple tubular fluorescent lamp systems is presented. The proposed structure has a high value for the power factor, a dimming capability, and soft switching of the semiconductor devices operated at high frequencies. A zero-current switching pulse width modulated SEPIC converter is used as the rectifying stage and it is controlled using the instantaneous average input current technique. The inverting stage consists of classical resonant half-bridge converter with series-resonant parallel-loaded filters. The dimming control technique is based on varying the switching frequency and monitoring the phase shift of the current drained by the filters and lamps in order to establish a closed loop control. Experimental results are presented that validate the theoretical analysis.

Genetic structure of Blastocerus dichotomus populations in the Parana River basin (Brazil) based on protein variability

The population structure of 147 marsh deer (Blastocerus dichotomus) from three areas in the Parana River basin, Brazil, was studied by observing protein polymorphism at 17 loci. Six loci were polymorphic and 11 monomorphic. The proportion of polymorphic loci (P) was 35.29% and the average heterozygosity (H) was 6.31%. Wright's F-ST indicated that only 4.9% of the total variation in allelic frequencies was due to genetic differences between the three groups. The high value of F-IS (0.246) indicated inbreeding in the marsh deer. Genetic distance values (D = 0.014-0.051) showed little divergence between the three areas. We suggest that probable mechanisms accounting for the genetic structure are female phylopatry and polygyny and also that inbreeding has resulted from decreasing areas of wetland leading to isolation, overhunting, and diseases transmitted by cattle.

Correlation between structural data and spectroscopic studies of a new beta-diketonate complex with trivalent europium and gadolinium

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The transformation of the North American apparel industry: is NAFTA a curse or a blessing?

Includes bibliography

Tax reforms and fiscal stabilization in Latin American countries

Includes bibliography

The evaluation of an instrument for pediatric oncology patient classification

The objectives of this study were to assess the interrater reproducibility of the instrument to classify pediatric patients with cancer; verify the adequacy of the patient classification instrument for pediatric patients with cancer; and make a proposal for changing the instrument, thus allowing for the necessary adjustments for pediatric oncology patients. A total of 34 pediatric inpatients of a Cancer Hospital were evaluated by the teams of physicians, nurses and nursing technicians. The Kappa coefficient was used to rate the agreement between the scores, which revealed a moderate to high value in the objective classifications, and a low value in the subjective. In conclusion, the instrument is reliable and reproducible, however, it is suggested that to classify pediatric oncology patients, some items should be complemented in order to reach an outcome that is more compatible with the reality of this specific population.

Análise Genética de Características Reprodutivas Na Raça Brahman

Aiming to establish selection criteria for the Brahman cattle in Brazil, the objective of this paper was to estimate genetic and environmental parameters for birth weight (BW), gestation length (GL) and scrotal circumference at 365 (SC365), 455 (SC455) and 550 (SC 550) days of age, and relative efficiency of indirect versus direct selection for these traits. Data were obtained from 15 851 animals belonging to 16 herds in six states, enrolled in a genetic breeding program. (Co)variance and heritability coefficients and genetic and environmental correlations between traits were estimated by restricted maximum likelihood (REML) under a multi trait animal model. The model included as fixed effects the contemporary group and the age of cow at calving as a covariate (linear and quadratic), and as random the direct genetic, the permanent environmental and residual effects. For BW and GL it was also considered the maternal genetic effect as random. Estimates of direct heritabilities were 0.36, 0.29, 0.55, 0.43 and 0.40 for BW, GL, SC365, SC455 and SC550, respectively. Genetic correlations between BW and GL, GL and SC365, GL and SC455, GL and SC550, SC365 and SC455, SC365 and SC550 and SC455 and SC550, were respectively 0.06, 0.13, 0.20, 0.13, 0.96, 0.98 and 0.99. The heritabilities estimates for all traits indicated these show enough additive genetic variability to respond favorably to selection. For sexual precocity, the best option would be SC365, due to the high value of heritability and to indirect selection at this age being more efficient than direct selection for PE455.

Sustainable production of biologically active molecules of marine based origin

The marine environment offers both economic and scientific potential which are relatively untapped from a biotechnological point of view. These environments whilst harsh are ironically fragile and dependent on a harmonious life form balance. Exploitation of natural resources by exhaustive wild harvesting has obvious negative environmental consequences. From a European industry perspective marine organisms are a largely underutilised resource. This is not due to lack of interest but due to a lack of choice the industry faces for cost competitive, sustainable and environmentally conscientious product alternatives. Knowledge of the biotechnological potential of marine organisms together with the development of sustainable systems for their cultivation, processing and utilisation are essential. In 2010, the European Commission recognised this need and funded a collaborative RTD/SME project under the Framework 7-Knowledge Based Bio-Economy (KBBE) Theme 2 Programme 'Sustainable culture of marine microorganisms, algae and/or invertebrates for high value added products'. The scope of that project entitled 'Sustainable Production of Biologically Active Molecules of Marine Based Origin' (BAMMBO) is outlined. Although the Union is a global leader in many technologies, it faces increasing competition from traditional rivals and emerging economies alike and must therefore improve its innovation performance. For this reason innovation is placed at the heart of a European Horizon 2020 Strategy wherein the challenge is to connect economic performance to eco performance. This article provides a synopsis of the research activities of the BAMMBO project as they fit within the wider scope of sustainable environmentally conscientious marine resource exploitation for high-value biomolecules. © 2013 Elsevier B.V.

Synthesis, structural characterization and photophysical properties of highly photoluminescent crystals of Eu(III), Tb(III) and Dy(III) with 2,5-thiophenedicarboxylate

Lanthanide compounds of general formula [Ln2(2,5-tdc) 3(dmf)2(H2O)2] ·2dmf·H2O (Ln = Eu(III) (1), Tb(III) (2), Gd(III) (3) and Dy(III) (4), dmf = N,N′-dimethylformamide and 2,5-tdc2- = 2,5-thiophedicarboxylate anion) were synthesized and characterized by elemental analysis, X-ray powder diffraction patterns, thermogravimetric analysis and infrared spectroscopy. Phosphorescence data of Gd(III) complex showed that the triplet states (T1) of 2,5-tdc2- ligand have higher energy than the main emitting states of Eu(III), Tb(III) and Dy(III), indicating that 2,5-tdc2- ligand can act as intramolecular energy donor for these metal ions. An energy level diagram was used to establish the most relevant channels involved in the ligand-to-metal energy transfer. The high value of experimental intensity parameter Ω2 for the Eu(III) complex indicate that the europium ion is in a highly polarizable chemical environment. The emission quantum efficiency (η) of the 5D0 emitting level of Eu(III) was also determined. The complexes act as possible light conversion molecular devices (LCMDs). © 2013 Elsevier B.V. All rights reserved.

Produção e caracterização da protease coagulante obtida por fermentação submersa a partir do fungo termofílico Thermomucor indicae-seudaticae N31

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Análise da viabilidade do aproveitamento da palha da cana de açúcar para cogeração de energia numa usina sucroalcooleira

Pós-graduação em Engenharia Mecânica - FEIS

Estudo comparativo de métodos ultra-sonográficos de avaliação da idade gestacional em cadelas

Pós-graduação em Medicina Veterinária - FMVZ

Bainha de segurança para acondicionamento de facão canavieiro durante sua vida útil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos do ultrassom de alta intensidade sob pressão na redução de Listeria monocytogenes em extrato de carne bovina

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE