Períodos de interferência das plantas daninhas em algodoeiro de fibra colorida ‘BRS Safira’

This study aimed to determine the late-season presence of weeds in reddish brown cotton (cultivar BRS Safira) and the critical times for removing weeds. The experiment was carried out in the area of Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) in Missao Velha-CE, Brazil, located at 7 degrees 42'07" S latitude and 39 degrees 24'18" WGr. longitude, during the 2007/2008 season. The treatments consisted of two control groups: weed-free crop during the initial period after crop emergency, and crop kept with weeds during initial period after plant emergency. Both consisted, 0; 20; 40; 60; 80 e 120 days after crop emergency (DAE), the weed community was evaluated by two phytosociological indices (relative dominance and relative importance). Regression analysis was performed as the model of sigmoidal Boltzman, using data from productivity separately within each type of competition, to identify the critical periods of competition, considering 2; 5 and 10% reduction in yield. The community of weeds was composed by 21 species, standing out among them: Richardia grandiflora, Amaranthus deflexus, Eleusine indica, Merremia aegyptia, Eragrotis pilosa, Cenchrus echinatus and Waltheria indica. Considering 2; 5 and 10% reduction in yield fiber as acceptable, the critical period before weed interference were, respectively, 8; 14 and 20 DAE. The critical period of weed interference, for those same levels of losses, were respectively, 100; 82 and 60 days.

Critical periods of weed control in naturally green colored cotton BRS Verde

Cotton with naturally colored fiber is increasing as a commercial crop due specially to its textile processing with reduced environmental impact, as dying is not necessary. The critical period of weed control and the weed community were studied in a field with the naturally green colored fiber cv. BRS Verde cultivated in Missao Velha, Brazil. Without weed control during all the cycle, a reduction of 82.9% in yield was observed. The critical period of weed control was between 31 and 74 days after emergence for a reduction of 5% in yield. The weed community was composed of 21 species, with higher relative importance and dominance of monocotyledonous species. The beginning of the critical period was found to be more influential on yield than the ending. Thus, defining the right moment to start weed control can be more important to yield than determining the moment to cease it. (C) 2011 Elsevier B.V. All rights reserved.

Emergência de plantas daninhas em lavouras de feijão e de trigo após o cultivo de espécies de cobertura de solo

O objetivo do trabalho foi avaliar a emergência das espécies de plantas daninhas Euphorbia heterophylla e Bidens pilosa em áreas de produção de feijão e de trigo, após o cultivo de plantas de cobertura. O trabalho foi conduzido em área sob sistema de plantio direto na palha, manejado por cinco anos consecutivos, na Fazenda Capivara, da Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) Arroz e Feijão, localizada no município de Santo Antônio de Goiás, GO. O solo do local é classificado como Latossolo Vermelho distrófico. Os tratamentos foram constituídos pela combinação de sete plantas de cobertura de solo: braquiarão (Brachiaria brizantha) - cv. Marandu; braquiarão em consórcio com o milho (Zea mays) - híbrido HT BRS 3150; guandu-anão (Cajanus cajan); milheto (Pennisetum glaucum) - cv. BN-2; mombaça (Panicum maximum) cv. Mombaça; sorgo granífero (Sorghum bicolor) - cv. BR 304; e estilosantes (Stylosanthes guianensis) - cv. Mineirão e por duas culturas cultivadas em sucessão nas áreas: feijão cv. Pérola e trigo - Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 42. Todas as plantas de cobertura foram cortadas no mesmo dia, utilizando-se um triturador de palhada, e deixadas na superfície do solo. As semeaduras do feijão e do trigo foram realizadas sessenta dias após o corte das culturas de cobertura. Foram realizadas duas contagens do número de plantas emergidas de E. heterophylla e de B. pilosa, separadas em três estágios de crescimento (plantas com menos de duas folhas, de duas a quatro folhas e com mais de quatro folhas). Entre as plantas de cobertura testadas, braquiarão e mombaça se mostraram as mais promissoras em reduzir a emergência de plantas daninhas em cultivos subseqüentes, apresentando resultados significativos na diminuição do número de plantas de E. heterophylla estabelecidas nas áreas cultivadas com feijão ou com trigo. Não se constataram diferenças quanto à capacidade das culturas de feijão e de trigo em reduzir a população de E. heterophylla e B. pilosa.

Acúmulo e exportação de macronutrientes pelo híbrido de melancia Tide

O objetivo do presente trabalho foi determinar o acúmulo e exportação de macronutrientes pela cultura da melancia, híbrido Tide. O experimento foi conduzido no município de Borborema - SP. As amostragens de plantas foram realizadas aos 15, 30, 45, 60 e 75 dias após transplantio (DAT), para determinação da massa seca e do acúmulo e exportação dos nutrientes (N, P, K, Ca, Mg e S). O acúmulo de massa seca foi lento até os 30 DAT, intensificando-se a partir deste período e atingindo, no final do ciclo, a contribuição média da parte vegetativa de 31% e dos frutos de 69%. Até 30 DAT, o acúmulo de nutrientes também foi pequeno, não ultrapassando 2% do total. Com a frutificação, houve forte incremento na quantidade de nutrientes acumulados. O período de maior demanda para N, Ca e Mg foi de 45 a 60 DAT e para P, K e S de 60 a 75 DAT. do total acumulado, a parte vegetativa foi responsável por 29,6% e os frutos com 70,4%. A ordem decrescente dos nutrientes acumulados pela cultura foi: K>N>Ca>Mg>P>S. Para a produtividade alcançada de 40 t ha-1 observou-se a seguinte exportação de nutrientes pelos frutos: 106,4 kg ha-1 de N, 11,1 kg ha-1 de P, 118,0 kg ha-1 de K, 4,3 kg ha-1 de Ca, 6,8 kg ha-1 de Mg e 6,0 kg ha-1 de S.

Condutividade elétrica em sementes de abóbora, híbrido Bárbara

A condutividade elétrica na solução de embebição de sementes tem sido um procedimento usado com sucesso para avaliar o vigor de sementes. A presente pesquisa foi desenvolvida com o objetivo de determinar os procedimentos adequados para o teste de condutividade elétrica de sementes de abóbora (Cucurbita moschata Duch ex. Lam). Foram utilizadas sementes do híbrido Bárbara, representadas por cinco lotes (1 a 5) na primeira etapa e por outros cinco (6 a 10) na segunda. Foram realizados os teste de germinação, primeira contagem de germinação, emergência de plântulas, índice de velocidade de emergência e de condutividade elétrica (CE). Para o teste de CE, foram estudadas variações no volume de água (50 e 75mL), na temperatura (20, 25 e 30ºC) e no tempo de embebição (1, 2, 4, 8, 12, 16, 20 e 24 horas). Assim, concluiu-se que a condição mais adequada para o teste de CE é a utilização de 50 sementes em 75mL de água por oito horas, à temperatura de 25ºC.

Características agronômicas e qualidade comercial de cultivares de milho pipoca em alta população

Com o objetivo de identificar cultivares de milho pipoca que se constituam em alternativa viável aos produtores foi conduzido um experimento em delineamento experimental de blocos casualizados, com cinco genótipos de milho pipoca (BRS Ângela, Zélia, IAC 112, IAC 12 e IAC TC-01) e quatro repetições, na safra 2003/2004. O experimento foi instalado em espaçamento entre as linhas de 60 cm, com densidade populacional de 75 mil plantas por hectare. No decorrer do experimento, foram avaliadas características agronômicas e comerciais em condição de campo e de laboratório. A variedade BRS Ângela apresentou maior produtividade, seguida pelos híbridos simples IAC, com Zélia (híbrido triplo) apresentando menor produtividade. O híbrido simples IAC 12 apresentou pior qualidade comercial de pipoca. A produção de grãos está associada positivamente com o número de grãos por espiga e com a massa de 1.000 grãos e negativamente com o teor de Ntotal no grão. A qualidade comercial se correlacionou negativamente com a massa de 1.000 grãos.

Resposta de plântulas de arroz cv. brs-soberana à aplicação de zinco via semente

A cultura do arroz constitui um dos principais cereais que apresenta alta resposta à aplicação de zinco, constituindo um dos principais cereais em que isso ocorre. Objetivou-se, no presente trabalho, avaliar a aplicação de zinco em sementes, a partir de duas fontes, sobre a nutrição e o crescimento inicial da cultura do arroz cultivar BRS-Soberana. O delineamento experimental utilizado foi o inteiramente casualizado, em três repetições. Os tratamentos foram cinco doses 1,0; 2,0; 4,0 e 8,0g de Zn por kg de semente, das fontes sulfato e óxido, além da testemunha. Após 30 dias da semeadura, avaliou-se a matéria seca (parte aérea e raiz) e o teor e acúmulo de zinco nas plantas. O sulfato de zinco não diferenciou ao óxido para produção de matéria seca total nas plântulas de arroz, entretanto, proporcionou maior absorção de Zn. A aplicação de zinco na forma de sulfato e óxido, na dose de 8g Zn.kg-1 de semente proporcionou maior produção de matéria seca atingindo teor do nutriente, na parte aérea de 281 e 163 mg.kg-1, respectivamente.

Modos de aplicação de zinco na nutrição e na produção de matéria seca do milho BRS 1001

The culture of the maize is responsive the fertilization with zinc, however, its efficiency can be affected by the method of aplication. Thus, this work had as objective to evaluate the effect of the methods of zinc application in the nutritional state and the initial growth of the culture of the maize. The experiment was in a completely randomized design, with five treatments in four repetitions. The experimental unit was composed for a pot (7 L) filled with a distrofic Red Latosol, clayey texture, with four plants of maize. The treatments had been constituted by four ways of zinc application: in the soil incorporated (3 mg Zn dm(-3)), and located (1 mg Zn dm(-3)); foliar (solution of 23 mg Zn L(-1)); e in seed (40 g Zn kg(-1) of seed) and beyond the witness (control). The treatments had been applied during two cultivation of 42 days, except the Zn incorporated in the soil. In the end of each culture, the cut of the plants for the evaluation of the growth variable (leaf height, number, the diameter of stems and dry matter) and the determination of the zinc text was carried through in the soil and the aerial part. The zinc application promoted increment in the height and the production of matter of the maize. The zinc application soil (incorporated and located), foliar and seed had been similar in the initial development of the culture, however, the foliar way promoted greater absorption of the nutrient for the plant.

Aplicação de zinco em sementes de sorgo cv. BRS 304: efeitos na nutrição e no crescimento inicial

The effect of zinc applied in seeds oil the nutrition of sorghum is affected by the sources and applied rate. The present work aimed to evaluate zinc application, front two sources, on the nutrition and initial growth of a culture of sorghum cv. BRS 304, cultivated in sand. The treatments consisted of five rites (0, 14.3, 28.6, 57.2 and 114.4 g kg(-1) of seed) and two zinc sources - sulphate (22% Zn) and oxide (50% Zn). At 25 days after sowing, the plants were cut. The aerial and root dry mass was evaluated, and the levels and accumulation of Zn in the plants were determined. The of seeds, in oxide form, provided adequate initial growth of application or 14 g Zn kg(-1) sorglitim cv. BRS 304. The sulphate source promoted greater absorption of Zn for the plants, reaching in its highest dosis, high levels of the nutrient in the aerial part (> 4170 mg kg(-1)) and developing characteristic symptoms of phytoxicity.

Resposta do híbrido de sorgo-sudão à adubação nitrogenada e potássica: composição química e digestibilidade in vitro da matéria orgânica

A pesquisa foi instalada no Setor de Forragicultura da FCAV/UNESP-Jaboticabal, objetivando avaliar a composição química e a digestibilidade in vitro da matéria orgânica (DIVMO) do híbrido de Sorgo-sudão cv. AG 2501C, no outono e inverno. O manejo da pastagem foi conduzido simulando o sistema de lotação intermitente. O experimento foi desenvolvido de março a setembro de 2002. A forrageira foi submetida a nove tratamentos: três níveis de nitrogênio (100, 200 e 300 kg de N/ha) e três níveis de potássio (0, 80 e 160 kg de K2O/ha), em delineamento experimental em blocos casualizados e parcelas subdivididas. A adubação nitrogenada e potássica não foram significativas para a DIVMO. O nitrogênio influenciou a proteína bruta (PB) com valores de 15,1; 16,4 e 15,7 %, a fibra em detergente neutro (FDN) com valores de 65,3; 65,8 e 64,5% e fibra em detergente ácido (FDA) com 35,5; 37,8 e 39,6% para 100; 200 e 300 kg N/ha. O potássio aumentou significativamente a lignina das plantas. O melhor nível obtido foi 100 kg/ha de nitrogênio, sem potássio.

Um algoritmo híbrido para o problema de roteamento de veículos com frotas heterogêneas

This paper aims to propose a hybrid meta-heuristics for the Heterogeneous Fleet Vehicle Routing Problem (HVRP), which is a combinatorial optimization problem NP-hard, and is characterized by the use of a limited fleet consists of different vehicles with different capacities. The hybrid method developed makes use of a memetic algorithm associated with the component optimizer Vocabulary Building. The resulting hybrid meta-heuristic was implemented in the programming language C + + and computational experiments generated good results in relation to meta-heuristic applied in isolation, proving the efficiency of the proposed method.

Sistema híbrido para detecção e diagnóstico de falhas em sistemas dinâmicos

The industries are getting more and more rigorous, when security is in question, no matter is to avoid financial damages due to accidents and low productivity, or when it s related to the environment protection. It was thinking about great world accidents around the world involving aircrafts and industrial process (nuclear, petrochemical and so on) that we decided to invest in systems that could detect fault and diagnosis (FDD) them. The FDD systems can avoid eventual fault helping man on the maintenance and exchange of defective equipments. Nowadays, the issues that involve detection, isolation, diagnose and the controlling of tolerance fault are gathering strength in the academic and industrial environment. It is based on this fact, in this work, we discuss the importance of techniques that can assist in the development of systems for Fault Detection and Diagnosis (FDD) and propose a hybrid method for FDD in dynamic systems. We present a brief history to contextualize the techniques used in working environments. The detection of fault in the proposed system is based on state observers in conjunction with other statistical techniques. The principal idea is to use the observer himself, in addition to serving as an analytical redundancy, in allowing the creation of a residue. This residue is used in FDD. A signature database assists in the identification of system faults, which based on the signatures derived from trend analysis of the residue signal and its difference, performs the classification of the faults based purely on a decision tree. This FDD system is tested and validated in two plants: a simulated plant with coupled tanks and didactic plant with industrial instrumentation. All collected results of those tests will be discussed

Comportamento de adesão da madeira de um híbrido clonal de Eucalyptus urophylla x Eucalyptus grandis proveniente de três condições de manejo

This study aimed to evaluate the adhesion ability of eucalyptus lumber from three tillage systems, using adhesives: resorcinol formaldehyde and two adhesives in water emulsion based on vinyl poly-acetate. The management systems were characterized by three strata, the stratum one (E1) characterized by wood from coppice and 70 months of age, the stratum two (E2) characterized by wood and retirement age of 166 months and stratum three (E3), also characterized by retirement at 70 months of age. The wood was derived from a random mixture of the first two sawn logs, each three feet from the base, which comprised three treatments on the adhesive used. We evaluated the shear strength by compression tests and the percentage of wood failure in the glue line. Based on the results obtained, it can be said that the adhesion had satisfactory performance with all the resins used, and the average values of shear strength of the glue line were shown to be equivalent to the shear strength of solid wood only for the samples which adhered with 'Wonderbond' adhesive and also provide higher values for wood failure (97.64%). The highest density present in the wood of the second stratum (E2) influenced only sticking with the resorcinol formaldehyde resin. For polyvinyl acetate (Cascorez 2590), shear values decreased in the third management condition (E3).

Sistema Híbrido de Inferência Baseado em Análise de Componentes Principais e Redes Neurais Artificiais Aplicado a Plantas de Processamento de Gás Natural

Nowadays, where the market competition requires products with better quality and a constant search for cost savings and a better use of raw materials, the research for more efficient control strategies becomes vital. In Natural Gas Processin Units (NGPUs), as in the most chemical processes, the quality control is accomplished through their products composition. However, the chemical composition analysis has a long measurement time, even when performed by instruments such as gas chromatographs. This fact hinders the development of control strategies to provide a better process yield. The natural gas processing is one of the most important activities in the petroleum industry. The main economic product of a NGPU is the liquefied petroleum gas (LPG). The LPG is ideally composed by propane and butane, however, in practice, its composition has some contaminants, such as ethane and pentane. In this work is proposed an inferential system using neural networks to estimate the ethane and pentane mole fractions in LPG and the propane mole fraction in residual gas. The goal is to provide the values of these estimated variables in every minute using a single multilayer neural network, making it possibly to apply inferential control techniques in order to monitor the LPG quality and to reduce the propane loss in the process. To develop this work a NGPU was simulated in HYSYS R software, composed by two distillation collumns: deethanizer and debutanizer. The inference is performed through the process variables of the PID controllers present in the instrumentation of these columns. To reduce the complexity of the inferential neural network is used the statistical technique of principal component analysis to decrease the number of network inputs, thus forming a hybrid inferential system. It is also proposed in this work a simple strategy to correct the inferential system in real-time, based on measurements of the chromatographs which may exist in process under study

Ambiente de simulação híbrido integrando hysys e rede industrial Foundation Fieldbus aplicado ao controle de uma coluna de destilação

The main purpose of this work is to develop an environment that allows HYSYS R chemical process simulator communication with sensors and actuators from a Foundation Fieldbus industrial network. The environment is considered a hybrid resource since it has a real portion (industrial network) and a simulated one (process) with all measurement and control signals also real. It is possible to reproduce different industrial process dynamics without being required any physical network modification, enabling simulation of some situations that exist in a real industrial environment. This feature testifies the environment flexibility. In this work, a distillation column is simulated through HYSYS R with all its variables measured and controlled by Foundation Fieldbus devices