Different behavior of nitrenes and carbenes on photolysis and thermolysis: Formation of azirine, ylidic cumulene, and cyclic ketenimine and the rearrangement of 6-phenanthridylcarbene to 9-phenanthrylnitrene

Flash vacuum thermolysis (FVT) of 9-azidophenanthrene 8, 6-(5-tetrazolyl)phenanthridine 18, and [1,2,3]triazolo[1,5-f]phenanthridine 19 yields 9-cyanofluorene 12 as the principal product and 4-cyanofluorene as a minor product. In all cases, when the product is condensed at or below 77 K, the seven-membered ring ketenimine 24 is detectable by IR spectroscopy (1932 cm(-1)) up to 200 K. Photolysis of Ar matrix isolated 8 at lambda = 308 or 313 nm generates at first the azirine 26, rapidly followed by the ylidic cumulene 27. The latter reverts to azirine 26 at lambda > 405 nm, and the azirine reverts to the ylidic cumulene at 313 nm. Nitrene 9 is observed by ESR spectroscopy following FVT of either azide 8, tetrazole 18, or triazole 19 with Ar matrix isolation of the products. Nitrene 9 and carbene 21 are observed by ESR spectroscopy in the Ar matrix photolyses of azide 8 and triazole 19, respectively.

Dde as a protecting group for carbohydrate synthesis

Oligosaccharide synthesis using aminosugars requires the presence of a suitable amino protecting group. A number of protecting groups are currently used, and while many display favorable properties, most agents available still suffer from certain disadvantages. This report details the use of a hydrazine labile aminosugar protecting group, N -[1-(4,4-dimethyl-2,6-dioxocyclohex-1-ylidene)ethyl] (Dde), which can be introduced and removed in a facile and cost-effective manner.

Azidoprofen as a soft anti-flammatory agent for the topical treatment of Psoriasis

Azidoprofen {2-(4-azidophenyl)propionic acid; AZP}, an azido-substituted arylalkanoic acid, was investigated as a model soft drug candidate for a potential topical non-steroidal anti-inflammatory agent (NSAIA). Reversed-phase high performance liquid chromatography (HPLC) methods were developed for the assay of AZP, a series of ester analogues and their· degradation products. 1H-NMR spectroscopy was also employed as an analytical method in selected cases. Reduction of the azido-group to the corresponding amine has been proposed as a potential detoxification mechanism for compounds bearing this substituent. An in vitro assay to measure the susceptibility of azides towards reduction was developed using dithiothreitol as a model reducing agent. The rate of reduction of AZP was found to be base-dependent, hence supporting the postulated mechanism of thiol-mediated reduction via nucleophilic attack by the thiolate anion. Prodrugs may enhance topical bioavailability through the manipulation of physico-chemical properties of the parent drug. A series of ester derivatives of AZP were investigated for their susceptibility to chemical and enzymatic hydrolysis, which regenerates the parent acid. Use of alcoholic cosolvents with differing alkyl functions to that of the ester resulted in transesterification reactions, which were found to be enzyme-mediated. The skin penetration of AZP was assessed using an in vitro hairless mouse skin model, and silastic membrane in some cases. The rate of permeation of AZP was found to be a similar magnitude to that of the well established NSAIA ibuprofen. Penetration rates were dependent on the vehicle pH and drug concentration when solutions were employed. In contrast, flux was independent of pH when suspension formulations were used. Pretreatment of the skin with various enhancer regimes, including oleic acid and azone in propylene glycol, promoted the penetration of AZP. An intense IR absorption due to the azide group serves as a highly diagnostic marker, enabling azido compounds to be detected in the outer layers of the· stratum corneum following their application to skin, using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). This novel application enabled a non-invasive examination of the percutaneous penetration enhancement of a model azido compound in vivo in man, in the presence of the enhancer oleic acid.

Lipophilic antifolates as potential antipsoriatic agents

The lipophilic dihydrofolate reductase (DHFR) inhibitor m-azidopyrimethamine (MZP) was investigated for suitability for development as a topical antipsoriatic agent. The clinical features and treatments for psoriasis were reviewed. High performance liquid chromatography (HPLC) was employed as the main analytical method, with UV spectroscopy being used in some cases. Reduction of the azido-group was proposed as a potential detoxification mechanism for MZP. The rates of reduction of a series of substituted phenyl azide compounds by dithiothreitol were investigated and found to depend on the substitution pattern of the aryl azide molecular, with electron deficient azides exhibiting faster rates of reduction in the system studied. The rates of reduction of MZP and analogous compounds were also studied using this model. The skin penetration of MZP was assessed using an in vitro hairless mouse skin model. The rate of permeation (flux) of MZP across hairless mouse skin was found to be dependent on the quantity of propylene glycol used as cosolvent in the vehicle and the pH. The use of a pretreatment regime of oleic acid in propylene glycol was shown to greatly increase the penetration of MZP through the hairless mouse skin as compared to application without pretreatment, or pretreatment with other penetration enhancers. The metabolism of MZP was studied in in vitro models comprising skin homogenates, SV-K14 human keratinocyte cell cultures and skin commensal bacterial cultures. No conversion of MZP to the corresponding amine was detected in any of the models. The growth inhibitory properties of MZP were investigated in an in vitro SV-K14 human keratinocyte cell culture model and compared with those of other DHFR inhibitors. [14C]-pyrimethamine was shown to be taken up by the SV-K14 keratinocytes.

Selective in vitro glycosylation of recombinant proteins:semi-synthesis of novel homogeneous glycoforms of human erythropoietin

Background: A natural glycoprotein usually exists as a spectrum of glycosylated forms, where each protein molecule may be associated with an array of oligosaccharide structures. The overall range of glycoforms can have a variety of different biophysical and biochemical properties, although details of structure–function relationships are poorly understood, because of the microheterogeneity of biological samples. Hence, there is clearly a need for synthetic methods that give access to natural and unnatural homogeneously glycosylated proteins. The synthesis of novel glycoproteins through the selective reaction of glycosyl iodoacetamides with the thiol groups of cysteine residues, placed by site-directed mutagenesis at desired glycosylation sites has been developed. This provides a general method for the synthesis of homogeneously glycosylated proteins that carry saccharide side chains at natural or unnatural glycosylation sites. Here, we have shown that the approach can be applied to the glycoprotein hormone erythropoietin, an important therapeutic glycoprotein with three sites of N-glycosylation that are essential for in vivo biological activity. Results: Wild-type recombinant erythropoietin and three mutants in which glycosylation site asparagine residues had been changed to cysteines (His10-WThEPO, His10-Asn24Cys, His10-Asn38Cys, His10-Asn83CyshEPO) were overexpressed and purified in yields of 13 mg l−1 from Escherichia coli. Chemical glycosylation with glycosyl-β-N-iodoacetamides could be monitored by electrospray MS. Both in the wild-type and in the mutant proteins, the potential side reaction of the other four cysteine residues (all involved in disulfide bonds) were not observed. Yield of glycosylation was generally about 50% and purification of glycosylated protein from non-glycosylated protein was readily carried out using lectin affinity chromatography. Dynamic light scattering analysis of the purified glycoproteins suggested that the glycoforms produced were monomeric and folded identically to the wild-type protein. Conclusions: Erythropoietin expressed in E. coli bearing specific Asn→Cys mutations at natural glycosylation sites can be glycosylated using β-N-glycosyl iodoacetamides even in the presence of two disulfide bonds. The findings provide the basis for further elaboration of the glycan structures and development of this general methodology for the synthesis of semi-synthetic glycoproteins. Results: Wild-type recombinant erythropoietin and three mutants in which glycosylation site asparagine residues had been changed to cysteines (His10-WThEPO, His10-Asn24Cys, His10-Asn38Cys, His10-Asn83CyshEPO) were overexpressed and purified in yields of 13 mg l−1 from Escherichia coli. Chemical glycosylation with glycosyl-β-N-iodoacetamides could be monitored by electrospray MS. Both in the wild-type and in the mutant proteins, the potential side reaction of the other four cysteine residues (all involved in disulfide bonds) were not observed. Yield of glycosylation was generally about 50% and purification of glycosylated protein from non-glycosylated protein was readily carried out using lectin affinity chromatography. Dynamic light scattering analysis of the purified glycoproteins suggested that the glycoforms produced were monomeric and folded identically to the wild-type protein. Conclusions: Erythropoietin expressed in E. coli bearing specific Asn→Cys mutations at natural glycosylation sites can be glycosylated using β-N-glycosyl iodoacetamides even in the presence of two disulfide bonds. The findings provide the basis for further elaboration of the glycan structures and development of this general methodology for the synthesis of semi-synthetic glycoproteins

Genetic and Molecular Basis of Encapsulation and Capsule Diversity in Kingella kingae

Kingella kingae is a bacterial pathogen that is increasingly recognized as an etiology of septic arthritis, osteomyelitis, bacteremia, and endocarditis in young children. The pathogenesis of K. kingae disease starts with bacterial adherence to the respiratory epithelium of the posterior pharynx. Previous work has identified type IV pili and a trimeric autotransporter protein called Knh (Kingella NhhA homolog) as critical factors for adherence to human epithelial cells. Additional studies established that the presence of a polysaccharide capsule interferes with Knh-mediated adherence. Given the inhibitory role of capsule during adherence we sought to uncover the genes involved in capsule expression to understand how capsule is elaborated on the cell surface. Additionally, this work aimed to further characterize capsule diversity among K. kingae clinical isolates and to investigate the relationship between capsule type and site of isolation.

We first set out to identify the carbohydrates present in the K. kingae capsule present in the prototype strain 269-492. Glycosyl composition and NMR analysis of surface extractable polysaccharides demonstrated two distinct polysaccharides, one consisting of GalNAc and Kdo with the structure →3)-β-GalpNAc-(1→5)-β-Kdop-(2→ and the other containing galactose alone with the structure →5)-β-Galf-(1→.

To discern the two polysaccharides we disrupted the ctrA gene required for surface localization of the K. kingae polysaccharide capsule and observed a loss of GalNAc and Kdo but no effect on the presence of Gal in bacterial surface extracts. In contrast, deletion of the pamABCDE locus involved in production of a reported galactan exopolysaccharide eliminated Gal but had no effect on the presence of GalNAc and Kdo in surface extracts. These results established that K. kingae strain KK01 produces a polysaccharide capsule with the structure →3)-β-GalpNAc-(1→5)-β-Kdop-(2→ and a separate exopolysaccharide with the structure →5)-β-Galf-(1→.

Having established that K. kingae produces a capsule comprised of GalNAc and Kdo, we next set out to identify the genetic determinants of capsule through a transposon mutagenesis screen. In addition to the previously identified ctrABCD operon, lipA, lipB, and a putative glycosyltransferase termed csaA (capsule synthesis region A gene A) were found to be essential for the production of surface-localized capsule. The ctr operon, lipA, lipB, and csaA were found to be present at unlinked locations throughout the genome, which is atypical for gram-negative organisms that elaborate a capsule dependent on an ABC-type transporter for surface localization. Through examining capsule localization in the ctrA, lipA, lipB, and csaA mutant strains, we determined that the ctrABCD, lipA/lipB, and csaA gene products respectively function in capsule export, assembly, and synthesis, respectively. The GalNAc transferase and Kdo transferase domains found in CsaA further support its role in catalyzing the synthesis of the GalNAc-Kdo capsule in the K. kingae prototype strain.

To investigate the capsule diversity that exists in K. kingae we screened a panel of strains isolated from patients with invasive disease or healthy carriers for the csaA capsule synthesis locus. We discovered that Kingella kingae expresses one of 4 capsule synthesis loci (csa, csb, csc, or csd) associated with a capsule consisting of Kdo and GalNAc (type a), Kdo and GlcNAc (type b), Kdo and ribose (type c), and GlcNAc and galactose (type d), respectively. Cloning of the csa, csb, csc, or csd locus into the empty flanking gene region in a non-encapsulated mutant (creation of an isogenic capsule swap) was sufficient to produce either the type a, type b, or type c capsule, respectively, further supporting the role of these loci in expression of a specific polysaccharide linkage. Capsule type a and capsule type b accounted for 96% of invasive strains. Conversely, capsule type c and capsule type d were found disproportionately among carrier isolates, suggesting that capsule type is important in promoting invasion and dissemination.

In conclusion, we discovered that Kingella kingae expresses a polysaccharide capsule and an exopolysaccharide on its surface that require distinct genetic loci for surface localization. Further investigation into genetic determinants of encapsulation revealed the loci ctrABCD, lipA/lipB, and a putative glycosyltransferase are required for capsule expression, with the gene products having roles in capsule export, assembly, and synthesis, respectively. The putative glycosyltransferase CsaA was determined to be a bifunctional enzyme with both GalNAc-transferase and Kdo-transferase activity. Furthermore, we discovered a total of 4 capsule types expressed in clinical isolates of K. kingae, each with a distinct capsule synthesis locus. The variation in the proportion of capsule types found between invasive strains and carriage strains suggest that capsule type is important in promoting invasion and dissemination. Taken together, this work expands our knowledge of the capsule types expressed among K. kingae carrier and invasive isolates and provides insights into the common genetic determinants of capsule expression. These contributions may lead to selecting clinically relevant capsule types to develop into a capsule based vaccine to prevent K. kingae colonization.

(Figure 4) Stable carbon isotopic values and relative contents of biphytanes and sugars from sediment sample from the Peru margin and from the Pakistan margin

Glycolipids are prominent constituents in the membranes of cells from all domains of life. For example, diglycosyl-glycerol dibiphytanyl glycerol tetraethers (2Gly-GDGTs) are associated with methanotrophic ANME-1 archaea and heterotrophic benthic archaea, two archaeal groups of global biogeochemical importance. The hydrophobic biphytane moieties of 2Gly-GDGTs from these two uncultivated archaeal groups exhibit distinct carbon isotopic compositions. To explore whether the isotopic compositions of the sugar headgroups provide additional information on the metabolism of their producers, we developed a procedure to analyze the d13C values of glycosidic headgroups. Successful determination was achieved by (1) monitoring the contamination from free sugars during lipid extraction and preparation, (2) optimizing the hydrolytic conditions for glycolipids, and (3) derivatizing the resulting sugars into aldononitrile acetate derivatives, which are stable enough to withstand a subsequent column purification step. First results of d13C values of sugars cleaved from 2Gly-GDGTs in two marine sediment samples, one containing predominantly ANME-1 archaea and the other benthic archaea, were obtained and compared with the d13C values of the corresponding biphytanes. In both samples the dominant sugar headgroups were enriched in 13C relative to the corresponding major biphytane. This 13C enrichment was significantly larger in the putative major glycolipids from ANME-1 archaea (~15 per mil) than in those from benthic archaea (<7 per mil). This method opens a new analytical window for the examination of carbon isotopic relationships between sugars and lipids in uncultivated organisms.

Synthèse de sulfilimines et de sulfoximines catalysée par les métaux de transition

Les sulfilimines et les sulfoximines sont des motifs structuraux dont l’intérêt synthétique est grandissant, notamment du fait de leurs applications en chimie médicinale et en agrochimie. Les travaux rapportés dans cet ouvrage décrivent le développement de nouvelles méthodes de synthèse efficaces pour la production de ces unités atypiques. Ces méthodes sont basées sur la réactivité d’une source d’azote électrophile, vis-à-vis de thioéthers et de sulfoxydes. L’utilisation d’un complexe métallique introduit en quantité catalytique a permis de favoriser le processus réactionnel. En tirant bénéfice de l’expertise de notre groupe de recherche sur le développement de réactions d’amination stéréosélectives de liaisons C-H et d’aziridination de styrènes, nous avons d’abord étudié la réactivité des N-mésyloxycarbamates comme source d’azote électrophile. Après avoir optimisé sa synthèse sur grande échelle, ce réactif chiral a été utilisé dans des réactions d’amination de thioéthers et de sulfoxydes, catalysées par un dimère de rhodium (II) chiral. Un processus diastéréosélectif efficace a été mis au point, permettant de produire des sulfilimines et des sulfoximines chirales avec d’excellents rendements et sélectivités. Au cours de l’optimisation de cette méthode de synthèse, nous avons pu constater l’effet déterminant de certains additifs sur la réactivité et la sélectivité de la réaction. Une étude mécanistique a été entreprise afin de comprendre leur mode d’action. Il a été observé qu’une base de Lewis telle que le 4-diméthylaminopyridine (DMAP) pouvait se coordiner au dimère de rhodium(II) et modifier ses propriétés structurales et redox. Les résultats que nous avons obtenus suggèrent que l’espèce catalytique active est un dimère de rhodium de valence mixte Rh(II)/Rh(III). Nous avons également découvert que l’incorporation de sels de bispyridinium avait une influence cruciale sur la diastéréosélectivité de la réaction. D’autres expériences sur la nature du groupe partant du réactif N-sulfonyloxycarbamate nous ont permis de postuler qu’une espèce nitrénoïde de rhodium était l’intermédiaire clé du processus d’amination. De plus, l’exploitation des techniques de chimie en débit continu nous a permis de développer une méthode d’amination de thioéthers et de sulfoxydes très performante, en utilisant les azotures comme source d’azote électrophile. Basée sur la décompositon photochimique d’azotures en présence d’un complexe de fer (III) simple et commercialement disponible, nous avons été en mesure de produire des sulfilimines et des sulfoximines avec d’excellents rendements. Le temps de résidence du procédé d’amination a pu être sensiblement réduit par la conception d’un nouveau type de réacteur photochimique capillaire. Ces améliorations techniques ont permis de rendre la synthèse plus productive, ce qui constitue un élément important d’un point de vue industriel.

Exploring coordination-driven self-assembly with autonomous chemical robots

The work presented herein focused on the automation of coordination-driven self assembly, exploring methods that allow syntheses to be followed more closely while forming new ligands, as part of the fundamental study of the digitization of chemical synthesis and discovery. Whilst the control and understanding of the principle of pre-organization and self-sorting under non-equilibrium conditions remains a key goal, a clear gap has been identified in the absence of approaches that can permit fast screening and real-time observation of the reaction process under different conditions. A firm emphasis was thus placed on the realization of an autonomous chemical robot, which can not only monitor and manipulate coordination chemistry in real-time, but can also allow the exploration of a large chemical parameter space defined by the ligand building blocks and the metal to coordinate. The self-assembly of imine ligands with copper and nickel cations has been studied in a multi-step approach using a self-built flow system capable of automatically controlling the liquid-handling and collecting data in real-time using a benchtop MS and NMR spectrometer. This study led to the identification of a transient Cu(I) species in situ which allows for the formation of dimeric and trimeric carbonato bridged Cu(II) assemblies. Furthermore, new Ni(II) complexes and more remarkably also a new binuclear Cu(I) complex, which usually requires long and laborious inert conditions, could be isolated. The study was then expanded to the autonomous optimization of the ligand synthesis by enabling feedback control on the chemical system via benchtop NMR. The synthesis of new polydentate ligands has emerged as a result of the study aiming to enhance the complexity of the chemical system to accelerate the discovery of new complexes. This type of ligand consists of 1-pyridinyl-4-imino-1,2,3-triazole units, which can coordinate with different metal salts. The studies to test for the CuAAC synthesis via microwave lead to the discovery of four new Cu complexes, one of them being a coordination polymer obtained from a solvent dependent crystallization technique. With the goal of easier integration into an automated system, copper tubing has been exploited as the chemical reactor for the synthesis of this ligand, as it efficiently enhances the rate of the triazole formation and consequently promotes the formation of the full ligand in high yields within two hours. Lastly, the digitization of coordination-driven self-assembly has been realized for the first time using an in-house autonomous chemical robot, herein named the ‘Finder’. The chemical parameter space to explore was defined by the selection of six variables, which consist of the ligand precursors necessary to form complex ligands (aldehydes, alkineamines and azides), of the metal salt solutions and of other reaction parameters – duration, temperature and reagent volumes. The platform was assembled using rounded bottom flasks, flow syringe pumps, copper tubing, as an active reactor, and in-line analytics – a pH meter probe, a UV-vis flow cell and a benchtop MS. The control over the system was then obtained with an algorithm capable of autonomously focusing the experiments on the most reactive region (by avoiding areas of low interest) of the chemical parameter space to explore. This study led to interesting observations, such as metal exchange phenomena, and also to the autonomous discovery of self assembled structures in solution and solid state – such as 1-pyridinyl-4-imino-1,2,3-triazole based Fe complexes and two helicates based on the same ligand coordination motif.

Synthèse de sulfilimines et de sulfoximines catalysée par les métaux de transition

Les sulfilimines et les sulfoximines sont des motifs structuraux dont l’intérêt synthétique est grandissant, notamment du fait de leurs applications en chimie médicinale et en agrochimie. Les travaux rapportés dans cet ouvrage décrivent le développement de nouvelles méthodes de synthèse efficaces pour la production de ces unités atypiques. Ces méthodes sont basées sur la réactivité d’une source d’azote électrophile, vis-à-vis de thioéthers et de sulfoxydes. L’utilisation d’un complexe métallique introduit en quantité catalytique a permis de favoriser le processus réactionnel. En tirant bénéfice de l’expertise de notre groupe de recherche sur le développement de réactions d’amination stéréosélectives de liaisons C-H et d’aziridination de styrènes, nous avons d’abord étudié la réactivité des N-mésyloxycarbamates comme source d’azote électrophile. Après avoir optimisé sa synthèse sur grande échelle, ce réactif chiral a été utilisé dans des réactions d’amination de thioéthers et de sulfoxydes, catalysées par un dimère de rhodium (II) chiral. Un processus diastéréosélectif efficace a été mis au point, permettant de produire des sulfilimines et des sulfoximines chirales avec d’excellents rendements et sélectivités. Au cours de l’optimisation de cette méthode de synthèse, nous avons pu constater l’effet déterminant de certains additifs sur la réactivité et la sélectivité de la réaction. Une étude mécanistique a été entreprise afin de comprendre leur mode d’action. Il a été observé qu’une base de Lewis telle que le 4-diméthylaminopyridine (DMAP) pouvait se coordiner au dimère de rhodium(II) et modifier ses propriétés structurales et redox. Les résultats que nous avons obtenus suggèrent que l’espèce catalytique active est un dimère de rhodium de valence mixte Rh(II)/Rh(III). Nous avons également découvert que l’incorporation de sels de bispyridinium avait une influence cruciale sur la diastéréosélectivité de la réaction. D’autres expériences sur la nature du groupe partant du réactif N-sulfonyloxycarbamate nous ont permis de postuler qu’une espèce nitrénoïde de rhodium était l’intermédiaire clé du processus d’amination. De plus, l’exploitation des techniques de chimie en débit continu nous a permis de développer une méthode d’amination de thioéthers et de sulfoxydes très performante, en utilisant les azotures comme source d’azote électrophile. Basée sur la décompositon photochimique d’azotures en présence d’un complexe de fer (III) simple et commercialement disponible, nous avons été en mesure de produire des sulfilimines et des sulfoximines avec d’excellents rendements. Le temps de résidence du procédé d’amination a pu être sensiblement réduit par la conception d’un nouveau type de réacteur photochimique capillaire. Ces améliorations techniques ont permis de rendre la synthèse plus productive, ce qui constitue un élément important d’un point de vue industriel.

Copper Nanoparticles in Click Chemistry

Conspectus: The challenges of the 21st century demand scientific and technological achievements that must be developed under sustainable and environmentally benign practices. In this vein, click chemistry and green chemistry walk hand in hand on a pathway of rigorous principles that help to safeguard the health of our planet against negligent and uncontrolled production. Copper-catalyzed azide–alkyne cycloaddition (CuAAC), the paradigm of a click reaction, is one of the most reliable and widespread synthetic transformations in organic chemistry, with multidisciplinary applications. Nanocatalysis is a green chemistry tool that can increase the inherent effectiveness of CuAAC because of the enhanced catalytic activity of nanostructured metals and their plausible reutilization capability as heterogeneous catalysts. This Account describes our contribution to click chemistry using unsupported and supported copper nanoparticles (CuNPs) as catalysts prepared by chemical reduction. Cu(0)NPs (3.0 ± 1.5 nm) in tetrahydrofuran were found to catalyze the reaction of terminal alkynes and organic azides in the presence of triethylamine at rates comparable to those achieved under microwave heating (10–30 min in most cases). Unfortunately, the CuNPs underwent dissolution under the reaction conditions and consequently could not be recovered. Compelling experimental evidence on the in situ generation of highly reactive copper(I) chloride and the participation of copper(I) acetylides was provided. The supported CuNPs were found to be more robust and efficient catalyst than the unsupported counterpart in the following terms: (a) the multicomponent variant of CuAAC could be applied; (b) the metal loading could be substantially decreased; (c) reactions could be conducted in neat water; and (d) the catalyst could be recovered easily and reutilized. In particular, the catalyst composed of oxidized CuNPs (Cu2O/CuO, 6.0 ± 2.0 nm) supported on carbon (CuNPs/C) was shown to be highly versatile and very effective in the multicomponent and regioselective synthesis of 1,4-disubstituted 1,2,3-triazoles in water from organic halides as azido precursors; magnetically recoverable CuNPs (3.0 ± 0.8 nm) supported on MagSilica could be alternatively used for the same purpose under similar conditions. Incorporation of an aromatic substituent at the 1-position of the triazole could be accomplished using the same CuNPs/C catalytic system starting from aryldiazonium salts or anilines as azido precursors. CuNPs/C in water also catalyzed the regioselective double-click synthesis of β-hydroxy-1,2,3-triazoles from epoxides. Furthermore, alkenes could be also used as azido precursors through a one-pot CuNPs/C-catalyzed azidosulfenylation–CuAAC sequential protocol, providing β-methylsulfanyl-1,2,3-triazoles in a stereo- and regioselective manner. In all types of reaction studied, CuNPs/C exhibited better behavior than some commercial copper catalysts with regard to the metal loading, reaction time, yield, and recyclability. Therefore, the results of this study also highlight the utility of nanosized copper in click chemistry compared with bulk copper sources.

Tools For Spatiotemporally Specific Proteomic Analysis In Multicellular Organisms

The emergence of mass spectrometry-based proteomics has revolutionized the study of proteins and their abundances, functions, interactions, and modifications. However, in a multicellular organism, it is difficult to monitor dynamic changes in protein synthesis in a specific cell type within its native environment. In this thesis, we describe methods that enable the metabolic labeling, purification, and analysis of proteins in specific cell types and during defined periods in live animals. We first engineered a eukaryotic phenylalanyl-tRNA synthetase (PheRS) to selectively recognize the unnatural L-phenylalanine analog p-azido-L-phenylalanine (Azf). Using Caenorhabditis elegans, we expressed the engineered PheRS in a cell type of choice (i.e. body wall muscles, intestinal epithelial cells, neurons, pharyngeal muscles), permitting proteins in those cells -- and only those cells -- to be labeled with azides. Labeled proteins are therefore subject to "click" conjugation to cyclooctyne-functionalized affnity probes, separation from the rest of the protein pool and identification by mass spectrometry. By coupling our methodology with heavy isotopic labeling, we successfully identified proteins -- including proteins with previously unknown expression patterns -- expressed in targeted subsets of cells. While cell types like body wall or pharyngeal muscles can be targeted with a single promoter, many cells cannot; spatiotemporal selectivity typically results from the combinatorial action of multiple regulators. To enhance spatiotemporal selectivity, we next developed a two-component system to drive overlapping -- but not identical -- patterns of expression of engineered PheRS, restricting labeling to cells that express both elements. Specifically, we developed a split-intein-based split-PheRS system for highly efficient PheRS-reconstitution through protein splicing. Together, these tools represent a powerful approach for unbiased discovery of proteins uniquely expressed in a subset of cells at specific developmental stages.

First comprehensive multi-tissue transcriptome of Cherax quadricarinatus (Decapoda: Parastacidae) reveals unexpected diversity of endogenous cellulase

The Australian freshwater crayfish species, Cherax quadricarinatus Von Martens, 1868, is an important commercial and invasive species that is also being increasingly used as a model organism to address important and interesting questions in crustacean biology. Through deep sequencing of the transcriptome of C. quadricarinatus from the hepatopancreas and four other tissues, we examine the evolution of endogenously transcribed cellulase genes and provide new insights into controversial issues regarding the nutritional biology of crayfishes. A cluster assembly approach yielded one of the highest quality transcriptome assemblies for a decapod crustacean to date. A total of 206,341,872 reads with an average read length of 80 bp were generated from sequencing the transcriptomes from the heart, kidney, hepatopancreas, nerve, and testis tissues. The assembled transcriptome contains a total of 44,525 transcripts. A total of 65 transcripts coding for carbohydrate-active enzymes (CAZy) were identified based on hidden Markov model (HMM), and a majority of them display high relative transcript abundance in the hepatopancreas tissue, supporting their role in nutrient digestion. Comprehensive phylogenetic analyses of proteins belonging to two main glycosyl hydrolase families (GH9 and GH5) suggest shared ancestry of C. quadricarinatus cellulases with other characterized crustacean cellulases. Our study significantly expands the number of known crustacean-derived CAZy-coding transcripts. More importantly, the surprising level of evolutionary diversification of these proteins in C. quadricarinatus suggests that these enzymes may have been of critical importance in the adaptation of freshwater crayfishes to new plant-based food sources as part of their successful invasion of freshwater systems from marine ancestors.