Influência do acabamento e polimento na resistência à flexão de uma cerâmica odontológica

Avaliou-se a influência de dois sistemas de acabamento e polimento na resistência à flexão de uma cerâmica feldspática EX-3 (Noritake). Para isto, confeccionou-se blocos cerâmicos com medidas em conformidade com a ISO 6872/1995. Em seguida obteve-se o glaze natural. A padronização da rugosidade superficial foi conferida com auxílio de um rugosímetro, e os blocos foram então divididos em cinco grupos. O Grupo I (controle) foi testado com glaze. Para os testes realizados nos demais grupos, os blocos receberam um tratamento de asperização por meio de uma ponta diamantada 4137 (KG Sorensen). Em seguida foram polidos com diferentes protocolos. No grupo II, o sistema de polimento dura white (Shofu). No grupo III, o sistema de polimento dura white (shofu) associado a uma pasta diamantada aplicada com disco de feltro. No grupo IV o sistema de polimento Exa Cerapol (Edenta) e no grupo V, este mesmo sistema mais pasta diamantada aplicada com disco de feltro. Após os procedimentos de acabamento e polimento, foi avaliada a rugosidade conseguida (Ra), para se avaliar a eficácia dos métodos testados. A análise estatística por ANOVA (p ≤ 0,05) mostrou não haver diferença estatisticamente significante entre os grupos (G2=3,820,58; G3=3,550,61; G4=4,050,40; G5=3,950.47) . Feito isto, os corpos-de-prova foram submetidos a um ensaio mecânico de resistência à flexão em três pontos, e também neste caso, os resultados depois de tratados estatisticamente não demonstraram diferenças estatísticas entre os grupos glazeados e os grupos que receberam tratamento (G1=132,126,9 MPa; G2=123,317,4 MPa; G3=114,519,3 MPa; G4=104,211,9 MPa e G5=104,719,1 MPa) . Após a realização destas avaliações, tornou-se possível concluir que o uso dos sistemas de acabamento e polimento testados neste trabalho permite obter superfícies com rugosidade similar a obtida com o glaze natural e não interferem na resistência à flexão da cerâmica utilizada.

Caracterização química de fases cristalográficas e física dos cimentos MTA Fillapex, AH Plus, Sealer 26 e Endofill

O objetivo desta pesquisa consiste em analisar através da caracterização química de fases cristalinas a composição e estrutura; e com a caracterização física a densidade, porosidade e área superficial dos seguintes cimentos endodônticos: MTA Fillapex, AH Plus, Sealer 26 e o Endofill. Para tal, foram realizadas análises dos cimentos antes da manipulação (pó e pastas) e depois da manipulação (corpos de prova). Empregando-se as técnicas de caracterização química: DRX e FRX e como técnicas de caracterização física: Picnometria de Hélio, a porosimetria de mercúrio, distribuição granulométrica e área superficial pela metodologia de BET. A caracterização química detalhou a composição dos cimentos sendo compatível com a descrição do fabricante e forneceu a quantificação das suas fases. A caracterização física mostrou que o MTA Fillapex apresentou os melhores resultados: a menor porosidade, o menor volume médio e o menor diâmetro do poro, o Sealer 26 dentre os cimentos resinosos apresentou o pior resultado, o Endofill mostrou-se melhor que o Sealer 26 tendo a maior densidade, o menor diâmetro das partículas, a distribuição granulométrica mais homogênea comparando-se a este. Os cimentos a base de resina mostraram um diâmetro do poro menor que o Endofill. Estes resultados podem estar ligados diretamente aos requisitos de um material obturador ideal. A metodologia utilizada produziu um detalhamento das características químicas e físicas dos cimentos estudados, mostrando um caminho para novas pesquisas na área.

Utilização de materiais restauradores autocondicionantes na prevenção de descoloração coronária causada por minociclina

O objetivo desse estudo foi comparar a capacidade de dois materiais restauradores em prevenir a descoloração coronária causada pela minociclina como medicação intracanal e propor uma técnica de fácil implementação para encorajar o uso da pasta tri-antibiótica para desinfecção do sistema de canais radiculares durante procedimentos de regeneração pulpar sem perda estética. Cem dentes foram selecionados, seus canais radiculares foram instrumentados e divididos em quatro grupos de acordo com o tratamento dentinário utilizado: Grupo OB- Agente adesivo OptiBond All-In-One (KERR); Grupo U200- Cimento resinoso auto-condicionante e auto adesivo RelyX U200 (3M ESPE); Grupo MIN- Sem revestimento; Grupo CN- Sem revestimento (controle negativo). Em todos os grupos, com exceção do CN, foi utilizada pasta de minociclina como medicação intracanal coberta por uma bolinha de algodão e vedados com restauração provisória. As medições de cor foram realizadas com um espectrofotômetro no início do estudo (T0), e 7(T7), 14 (T14), 21 (T21) e 28 dias (T28) pós-minociclina. Os resultados obtidos foram submetidos à análise estatística. As diferenças de cor (E*) foram crescentes nos grupos CN, OB, U200 e MIN, respectivamente. A diferença de luminosidade (L*) foi também crescente nos grupos CN, OB, U200 e MIN, respectivamente. Houve diferença significante entre os grupos MIN e CN, e entre os grupos MIN e U200 (p<0,05). O eixo amarelo-azul (b*) não apresentou alteração de cor significante (p>0,05). Uma alteração de cor significante no eixo vermelho-verde (a*) foi observada no grupo MIN em relação ao grupo CN (p<0,05). Portanto, conclui-se que a técnica foi fácil de ser implementada, ambos materiais reduziram a descoloração da coroa causada pela pasta de minociclina mas foram ineficazes em impedi-la completamente.

Role of transglutaminase-mediated cross-linking of protein in the temperature-dependent setting of Alaska pollack surimi

During the low temperature setting of fish paste, myosin heavy chain (MHC) is polymerized to cross-linked myosin heavy chain (CMHC), which is considered to occur by the action of endogenous transglutaminase (TGase). In this study the contribution of TGase on the setting of Alaska pollack surimi at different temperatures was studied. Alaska pollack surimi was ground with 3% NaCl, 30% h2o and with or without ethylene glycol bis (β-aminoethylether) N, N, N¹,N¹- tetra acetic acid (EGTA), an inhibitor of TGase. Among the pastes without EGTA, highest TGase activity was observed at 25°C but breaking force of the gel set at 25°C was lower than that set at 30°, 35°, and 40°C. Addition of EGTA (5m mol/kg) to the paste suppressed TGase activity at all setting temperatures from 20° to 40°C. Gelation of the pastes and cross-linking of MHC on addition of EGTA were suppressed completely at 20° and 25°C, partially at 30° and 35°C, and not at all at 40°C. The findings suggested that during the setting of Alaska pollack surimi TGase mediated cross-linking of MHC was strong at around 25°C but the thermal aggregation of MHC by non-covalent bonds was strong at above 35°C. Setting of surimi at 40°C and cross-linking of its MHC did not involve TGase.

Effect of microwave pasteurisation on the quality of fish chikuwa

Temperature profile of fish chikuwa was taken during microwave cooking at 100 power level for different durations and subjected to organoleptic evaluation. Moisture content and organoleptic quality of fish chikuwa paste mixed with different levels of moisture and cooked at 100 power levels for 6 minutes were analysed. Microwave cooked fish chikuwa with standardized recipe was heated in microwave oven with hot air at different temperature for different durations. Fish chikuwa microwave cooked at 100 power level for 6 minutes had higher scores for all attributes as compared to those cooked for different durations and also fulfill the condition of pasteurisation of fish chikuwa. Fish chikuwa prepared with 35% moisture had better scores for all attributes unlike those of other levels. Heating of microwave pasteurised fish chikuwa at different temperatures for different durations could not achieve the desired brown colour.

Preparation of pasteurized fish ball in curry and its storage study at 0 to 2°C

Fish ball in curry was prepared as per the standardized method and recipe, pasteurized and subjected to storage at 0 to 2°C in a domestic refrigerator. The curry prepared with tomato at a level of 20% of onion was found to be suitable organoleptically. A level of 3% of spice mixture improved the taste of curry. Fish balls prepared with concentrated curry paste and oil at a level of 0.5% was found to be suitable organoleptically. Curry prepared by adding oil at the rate of 3% scored high values for all attributes as compared to other levels. Curry prepared by diluting curry paste with water at rate of 20% had been adjudged the best as compared to other water levels. Fish ball in curry with a 50 : 50 ratio pasteurized at 85°C for five minutes had scored higher values under organoleptic evaluation. It was observed that the product was acceptable organoleptically up to the 12th day when stored at 0 to 2°C.

Standardisation of recipe for the preparation of lobster analogues

Lobster analogues were prepared with lobster base flavour (paste),h lobster cook water (whole lobster omogenate:water, 1:1 and 1:0.5) and lobster meat mince. In another experiment, different combinations of ginger-garlic paste and lobster base flavour, i.e., 1:3, 1:4, 1:6, 3:3, 3:4, 3:6, 5:3, 5:4 and 5:6 were added to the lobster analogue paste. It was observed that lobster analogues prepared with lobster base flavour (paste) are suitable organoleptically. The combination of ginger garlic paste and lobster base flavour in the ratio of 3:4 was found to be suitable organoleptically. Lobster analogues coloured with annatto seed colour at 1:2 (annatto seed:water) concentration had high values for the colour attribute as compared to orange-red synthetic colour, beetroot colour, caramel colour and paprika colour. It was observed that come-up-time to achieve a temperature of850°C was 28 minutes with a processing period of 11 minutes.

Flow of wet powder in a conical centrifugal filter-an analytical model

A one-dimensional analytical model is developed for the steady state, axisymmetric, slender flow of saturated powder in a rotating perforated cone. Both the powder and the fluid spin with the cone with negligible slip in the hoop direction. They migrate up the wall of the cone along a generator under centrifugal force, which also forces the fluid out of the cone through the powder layer and the porous wall. The flow thus evolves from an over-saturated paste at inlet into a nearly dry powder at outlet. The powder is treated as a Mohr-Coulomb granular solid of constant void fraction and permeability. The shear traction at the wall is assumed to be velocity and pressure dependent. The fluid is treated as Newtonian viscous. The model provides the position of the colour line (the transition from over- to under-saturation) and the flow velocity and thickness profiles over the cone. Surface tension effects are assumed negligible compared to the centrifugal acceleration. Two alternative conditions are considered for the flow structure at inlet: fully settled powder at inlet, and progressive settling of an initially homogeneous slurry. The position of the colour line is found to be similar for these two cases over a wide range of operating conditions. Dominant dimensionless groups are identified which control the position of the colour line in a continuous conical centrifuge. Experimental observations of centrifuges used in the sugar industry provide preliminary validation of the model. © 2011 Elsevier Ltd.

Synthesis of 10 nm Ag nanoparticle polymer composite pastes for low temperature production of high conductivity films

The conversion of silver nanoparticle (NP) paste films into highly conductive films at low sintering temperature is an important requirement for the developing areas of additive fabrication and printed electronics. Ag NPs with a diameter of ∼10 nm were prepared via an improved chemical process to produce viscous paste with a high wt%. The paste consisted of as-prepared Ag NP and an organic vehicle of ethylcellulose that was deposited on glass and Si substrates using a contact lithographic technique. The morphology and conductivity of the imprinted paste film were measured as a function of sintering temperature, sintering time and the percentage ratio of Ag NP and ethylcellulose. The morphology and conductivity were examined using scanning electron microscopy (SEM) and a two-point probe electrical conductivity measurement. The results show that the imprinted films were efficiently converted into conducting states when exposed to sintering temperature in the range of 200-240 °C, this temperature is lower than the previously reported values for Ag paste. © 2010 Elsevier B.V. All rights reserved.

Properties and microstructure of GGBS-magnesia pastes

Reactive magnesia (MgO) was used as an alkali activator for ground granulated blast-furnace slag (GGBS) and its activating efficiency was investigated compared with hydrated lime. GGBS-MgO and GGBS-hydrated lime paste samples with different compositions and different water to solid ratios were prepared and cured for different periods. A range of tests was conducted to investigate the properties and microstructure of the pastes, including compressive strength, X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray and thermogravimetric analysis. The results showed that the reactive MgO acts as an effective alkali activator of GGBS, achieving higher 28-day compressive strength than that of the corresponding GGBS-hydrated lime system. The extensive microstructural investigation indicated that the main hydration product of reactive MgO-activated GGBS and hydrated lime-activated GGBS systems was hydrated calcium silicate, but there was much more hydrotalcite present in the former, which contributed to its superior 28-day compressive strength.

Structure-function analysis of the inverted terminal repeats of the Sleeping Beauty transposon

Translocation of Sleeping Beauty (SB) transposon requires specific binding of SB transposase to inverted terminal repeats (ITRs) of about 230 bp at each end of the transposon, which is followed by a cut-and-paste transfer of the transposon into a target DNA sequence. The ITRs contain two imperfect direct repeats (DRs) of about 32 bp. The outer DRs are at the extreme ends of the transposon whereas the inner DRs are located inside the transposon, 165-166 bp from the outer DRs. Here we investigated the roles of the DR elements in transposition. Although there is a core transposase-binding sequence common to all of the DRs, additional adjacent sequences are required for transposition and these sequences vary in the different DRs. As a result, SB transposase binds less tightly to the outer DRs than to the inner DRs. Two DRs are required in each ITR for transposition but they are not interchangeable for efficient transposition. Each DR appears to have a distinctive role in transposition. The spacing and sequence between the DR elements in an ITR affect transposition rates, suggesting a constrained geometry is involved in the interactions of SB transposase molecules in order to achieve precise mobilization. Transposons are flanked by TA dinucleotide base-pairs that are important for excision; elimination of the TA motif on one side of the transposon significantly reduces transposition while loss of TAs on both flanks of the transposon abolishes transposition. These findings have led to the construction of a more advanced transposon that should be useful in gene transfer and insertional mutagenesis in vertebrates. (C) 2002 Elsevier Science Ltd. All rights reserved.

Preparation of nanoparticles of bipyridineruthenium and silicotungstate and application as electrochemiluminescence sensor

The novel nanoparticles, [Ru(bPY)(3)](2)SiW12O40 center dot 2H(2)O(2) were firstly synthesized and characterized by elemental analysis, IR, and TEM. The nanoparticles were used to fabricate a chemically modified carbon paste electrode (CPE) by dispersing nanoparticles and graphite powder in silicone grease. Thus-prepared CPE shows bifunctional electrocatalytic activities towards the reduction of nitrite and the oxidation of oxalate, and exhibits sensitive electrochemiluminescence (ECL).

Solid-state electrochemiluminescence of tris(2,2 '-bipyridyl) ruthenium

Electrochemiluminescence (ECL) of tris(2,2'-bipyridyl) ruthenium [Ru(bpy)(3)(2+)] has received considerable attention. By immobilizing Ru(bpy)(3)(2+) on an e electrode surface, solid-state ECL provides several advantages over solution-phase ECL, such as reducing consumption of expensive reagent, simplifying experimental design and enhancing the ECL signal.This review presents the state of the art in solid-state ECL of Ru(bpy)(3)(2+).

Simultaneous electrochemical determination of dopamine, uric acid and ascorbic acid using palladium nanoparticle-loaded carbon nanofibers modified electrode

Palladium nanoparticle-loaded carbon nanofibers (Pd/CNFs) were prepared by electrospinning and subsequent thermal treatment processes. Pd/CNFs modified carbon paste electrode (Pd/CNF-CPE) displayed excellent electrochemical catalytic activities towards dopamine (DA), uric acid (UA) and ascorbic acid (AA). The oxidation overpotentials of DA, UA and AA were decreased significantly compared with those obtained at the bare CPE. Differential pulse voltammetry was used for the simultaneous determination of DA, UA and AA in their ternary mixture.

Simultaneous determination of dopamine, ascorbic acid and uric acid with electrospun carbon nanofibers modified electrode

A novel carbon-nanofiber-modified carbon-paste electrode (CNF-CPE) was employed for the simultaneous determination of dopamine (DA), ascorbic acid (AA) and uric acid (UA) with good selectivity and high sensitivity. The CNFs were prepared by combination of electrospinning technique with thermal treatment method and were used without any pretreatment. In application to determination of DA, AA and UA in the ternary mixture, the pristine CNF-CPE exhibited well-separated differential pulse voltammetric peaks with high catalytic current. Low detection limits of 0.04 mu M, 2 mu M and 0.2 mu M for DA, AA and UA were obtained, with the linear calibration curves over the concentration range 0.04-5.6 mu M, 2-64 mu M and 0.8-16.8 mu M, respectively.