181 resultados para GEOPROCESSING
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Serra da Canastra National Park (SCNP) is one of the most important protected areas in the Cerrado biome. Despite its importance to the conservation of rare and endangered species like Brazilian Merganser, two bills were approved in 2010 by Brazil's Chamber of Deputies aiming to reduce SCNP's official boundaries and to transform some of its parts into an Environmental Protection Area (EPA). We evaluated whether such changes would facilitate mining areas to be legally exploited within the park's area, and if those mining areas would represent a threat to Brazilian Merganser populations at SCNP. Results showed that 55% of the mining areas currently within the National Park will be located within the new EPA, and six hydrographic micro-basins inhabited by Brazilian Merganser could be affected by environmental impacts caused by mineral exploitation in those areas. For these reasons, we recommend the two bills be refused at the Federal Senate.
Resumo:
The purpose of this study was to present a spatial analysis of the social vulnerability of teenage pregnancy by geoprocessing data on births and deaths present on the Brazilian Ministry of Health databases in order to support intersectoral management actions and strategies based on spatial analysis in neighborhood areas. The thematic maps of the educational, occupational, birth and marital status of mothers, from all births and deaths in the city, presented a spatial correlation with teenage pregnancy. These maps were superimposed to produce social vulnerability map of adolescent pregnancy and women in general. This process presents itself as a powerful tool for the study of social vulnerability.
Resumo:
Mapping of soil has been highlighted in the scientific community, because as alertness about the environment increases, it is necessary to understand more and more about the distribution of the soil in the landscape, as well as its potential and its limitations for the use. In that way the main aim of this study was to apply indices representing landscape with the use of geoprocessing to give support in the delimitation of different compartments of landscape. Primary indices used were altitude above channel network (AACN) and secondary channel network base level (CNBL), multiresolution index of valley bottom flatness (MRVBF) and Wetness index (ITW), having as object of study the Canguiri Experimental Farm, located in Pinhais, Curitiba's Metropolitan region. To correlate the chemical attributes and granulometric ones in sampling groups, totalizing 17 points (Sugamosto, 2002), a matrix of a simple linear correlation (Pearson) with the indices of the landscape were generated in the Software Statistica. The conclusion is that the indices representing the landscape used in the analysis of groupings were efficient as support to map soil at the level of suborder of Brazilian Soil Classification System.
Resumo:
Detailed environmental land characterization is essential for technical and financial planning, for both the scientific point of view and technological application. This work aimed at the physiographic and pedological characterization and eucalyptus productivity mapping at Itatinga Forest Sciences Experimental Station (southeastern Brazil), using geographic information systems in order to identify possible cause-effect relationships between forest productivity and soil attributes. The digital cartographic dataset was structured as follows: as primary source of data, aerial photograph and field survey were used and, as a secondary source, topographical, geological and land use occupation maps were used. For mapping wood productivity at age six (MAI6, Mean Annual Increment), inventory data of permanent plots (same species, provenance and age) were used, which were obtained from Eucalyptus grandis plantations. Using simple linear correlation and backward stepwise multiple regression analysis, the dependent variable (MAI) was related with physical and chemical characteristics of the soils. Two standards of contour curves were identified, one with close curves, narrow and surrounding the drainage network, in the steeper and lower altitude areas; the other, with spaced contour lines, in the areas of higher altitude and with plane relief. Six types of soils were characterized as being highly related to the physiographic patterns of the area: loamy sandy to sandy clayey Typic Hapludox (LVAd, 47.5%), clayey Rhodic Hapludox (LVd1, 33.4%), sandy clay Rhodic Hapludox (LVd2, 6%), clayey Rhodic Hapludox (LVdf, 9.1%), Entisols (G, 3.4%) and Fluvents soil (RY, 0.6%). There were large variations in wood productivity in the Eucalyptus grandis plantations, characterized in six classes, ranging from 26 to 52 m(3) ha(-1) yr(-1). These productivity changes were strictly related to soil mapping units. Through multiple regression analysis, we found that clay and organic matter contents were the attributes which most strongly explained the productivity differences.
Resumo:
Overpopulation of urban areas results from constant migrations that cause disordered urban growth, constituting clusters defined as sets of people or activities concentrated in relatively small physical spaces that often involve precarious conditions. Aim. Using residential grouping, the aim was to identify possible clusters of individuals in São José do Rio Preto, Sao Paulo, Brazil, who have or have had leprosy. Methods. A population-based, descriptive, ecological study using the MapInfo and CrimeStat techniques, geoprocessing, and space-time analysis evaluated the location of 425 people treated for leprosy between 1998 and 2010. Clusters were defined as concentrations of at least 8 people with leprosy; a distance of up to 300 meters between residences was adopted. Additionally, the year of starting treatment and the clinical forms of the disease were analyzed. Results. Ninety-eight (23.1%) of 425 geocoded cases were located within one of ten clusters identified in this study, and 129 cases (30.3%) were in the region of a second-order cluster, an area considered of high risk for the disease. Conclusion.This study identified ten clusters of leprosy cases in the city and identified an area of high risk for the appearance of new cases of the disease.
Resumo:
One of the global phenomena with threats to environmental health and safety is artisanal mining. There are ambiguities in the manner in which an ore-processing facility operates which hinders the mining capacity of these miners in Ghana. These problems are reviewed on the basis of current socio-economic, health and safety, environmental, and use of rudimentary technologies which limits fair-trade deals to miners. This research sought to use an established data-driven, geographic information (GIS)-based system employing the spatial analysis approach for locating a centralized processing facility within the Wassa Amenfi-Prestea Mining Area (WAPMA) in the Western region of Ghana. A spatial analysis technique that utilizes ModelBuilder within the ArcGIS geoprocessing environment through suitability modeling will systematically and simultaneously analyze a geographical dataset of selected criteria. The spatial overlay analysis methodology and the multi-criteria decision analysis approach were selected to identify the most preferred locations to site a processing facility. For an optimal site selection, seven major criteria including proximity to settlements, water resources, artisanal mining sites, roads, railways, tectonic zones, and slopes were considered to establish a suitable location for a processing facility. Site characterizations and environmental considerations, incorporating identified constraints such as proximity to large scale mines, forest reserves and state lands to site an appropriate position were selected. The analysis was limited to criteria that were selected and relevant to the area under investigation. Saaty’s analytical hierarchy process was utilized to derive relative importance weights of the criteria and then a weighted linear combination technique was applied to combine the factors for determination of the degree of potential site suitability. The final map output indicates estimated potential sites identified for the establishment of a facility centre. The results obtained provide intuitive areas suitable for consideration
Proposition de nouvelles fonctionnalités WikiSIG pour supporter le travail collaboratif en Geodesign
Resumo:
L’émergence du Web 2.0 se matérialise par de nouvelles technologies (API, Ajax…), de nouvelles pratiques (mashup, geotagging…) et de nouveaux outils (wiki, blog…). Il repose principalement sur le principe de participation et de collaboration. Dans cette dynamique, le Web à caractère spatial et cartographique c’est-à-dire, le Web géospatial (ou GéoWeb) connait lui aussi de fortes transformations technologiques et sociales. Le GéoWeb 2.0 participatif se matérialise en particulier par des mashups entre wikis et géobrowsers (ArgooMap, Geowiki, WikiMapia, etc.). Les nouvelles applications nées de ces mashups évoluent vers des formes plus interactives d’intelligence collective. Mais ces applications ne prennent pas en compte les spécificités du travail collaboratif, en particulier la gestion de traçabilité ou l’accès dynamique à l’historique des contributions. Le Geodesign est un nouveau domaine fruit de l’association des SIG et du design, permettant à une équipe multidisciplinaire de travailler ensemble. Compte tenu de son caractère émergent, le Geodesign n’est pas assez défini et il requiert une base théorique innovante, de nouveaux outils, supports, technologies et pratiques afin de s’adapter à ses exigences complexes. Nous proposons dans cette thèse de nouvelles fonctionnalités de type WikiSIG, bâties sur les principes et technologies du GéoWeb 2.0 et visant en particulier à supporter la dimension collaborative du processus de Geodesign. Le WikiSIG est doté de fonctionnalités wiki dédiées à la donnée géospatiale (y compris dans sa composante géométrique : forme et localisation) permettant d’assurer, de manière dynamique, la gestion documentée des versions des objets et l’accès à ces versions (et de leurs métadonnées), facilitant ainsi le travail collaboratif en Geodesign. Nous proposons également la deltification qui consiste en la capacité de comparer et d’afficher les différences entre deux versions de projets. Finalement la pertinence de quelques outils du géotraitement et « sketching » est évoquée. Les principales contributions de cette thèse sont d’une part d’identifier les besoins, les exigences et les contraintes du processus de Geodesign collaboratif, et d’autre part de proposer des nouvelles fonctionnalités WikiSIG répondant au mieux à la dimension collaborative du processus. Pour ce faire, un cadre théorique est dressé où nous avons identifié les exigences du travail collaboratif de Geodesign et proposé certaines fonctionnalités WikiSIG innovantes qui sont par la suite formalisés en diagrammes UML. Une maquette informatique est aussi développée de façon à mettre en oeuvre ces fonctionnalités, lesquelles sont illustrées à partir d’un cas d’étude simulé, traité comme preuve du concept. La pertinence de ces fonctionnalités développées proposées est finalement validée par des experts à travers un questionnaire et des entrevues. En résumé, nous montrons dans cette thèse l’importance de la gestion de la traçabilité et comment accéder dynamiquement à l’historique dans un processus de Geodesign. Nous proposons aussi d’autres fonctionnalités comme la deltification, le volet multimédia supportant l’argumentation, les paramètres qualifiant les données produites, et la prise de décision collective par consensus, etc.
Resumo:
INTRODUÇÃO: O vírus da dengue é transmitido pela picada do mosquito Aedes aegypti e, o atual programa de controle não atinge o objetivo de impedir sua transmissão. Este trabalho objetivou analisar a relação entre a distribuição espaço-temporal de casos de dengue e os indicadores larvários no município de Tupã, de janeiro de 2004 a dezembro de 2007. MÉTODOS: Foram construídos indicadores larvários por quarteirão e totalidade do município. Utilizou-se o método cross-lagged correlation para avaliar a correlação entre casos de dengue e indicadores larvários. Foi utilizado estimador kernel para análise espacial. RESULTADOS: A correlação cruzada defasada entre casos de dengue e indicadores larvários foi significativa. Os mapas do estimador Kernel da positividade de recipientes indicam uma distribuição heterogênea, ao longo do período estudado. Nos dois anos de transmissão, a epidemia ocorreu em diferentes regiões. CONCLUSÕES: Não ficou evidenciada relação espacial entre infestação larvária e ocorrência de dengue. A incorporação de técnicas de geoprocessamento e análise espacial no programa, desde que utilizados imediatamente após a realização das atividades, podem contribuir com as ações de controle, indicando os aglomerados espaciais de maior incidência.
Resumo:
This study presents an application of the geographical information system technology on plant disease involving a multidisciplinary teamwork of geoprocessing and physiopathology specialists. The spatial analysis tools in a GIS were used to evaluate the spatial distribution of two diseases of maize in Brazil: polysora rusl caused by Puccinia polysora and tropical rust caused by Physopella zeae. A database of cIimate variables (mean temperature. relative humidity. and leaf wetness duration) of cIimatological normal from 1961-1990 was obtained and then related it to a mathematical model of disease development (polysora rust) and to the cIimate intervals (tropical rust) in order to obtain the maps. The choice of the model or the favorable climate interval is the important chalIenge of the method because the difficulty of adequacy to the spatial and temporal scales for the specific application. The major incidence of both disease occurred in almost alI the North region from January to June. although this region has traditionalIy a low production of maize. Considering the biggest producers regions. for both the diseases, favorable areas are located in part of Mato Grosso, Tocanlins. Minas Gerais; Mato Grosso do Sul. and coastal areas of São Paulo, Paraná, and Santa Catarina. varying among the dilferent months from January to June. The method allowed making an adequate distinction of the states and the months considered.
Resumo:
This work presents the results of a survey in oil-producing region of the Macau City, northern coast of Rio Grande do Norte. All work was performed under the Project for Monitoring Environmental Change and the Influence of Hydrodynamic forcing on Morphology Beach Grass Fields, Serra Potiguar in Macau, with the support of the Laboratory of Geoprocessing, linked to PRH22 - Training Program in Geology Geophysics and Information Technology Oil and Gas - Department of Geology/CCET/UFRN and the Post-Graduation in Science and Engineering Oil/PPGCEP/UFRN. Within the economic-ecological context, this paper assesses the importance of mangrove ecosystem in the region of Macau and its surroundings as well as in the following investigative exploration of potential areas for projects involving reforestation and / or Environmental Restoration. At first it was confirmed the ecological potential of mangrove forests, with primary functions: (i) protection and stabilization of the shoreline, (ii) nursery of marine life, and (iii) source of organic matter to aquatic ecosystems, (iv) refuge of species, among others. In the second phase, using Landsat imagery and techniques of Digital Image Processing (DIP), I came across about 18,000 acres of land that can be worked on environmental projects, being inserted in the rules signed the Kyoto Protocol to the market carbon. The results also revealed a total area of 14,723.75 hectares of activity of shrimp production and salting that can be harnessed for the social, economic and environmental potential of the region, considering that over 60% of this area, ie, 8,800 acres, may be used in the planting of the genus Avicennia considered by the literature that the species best sequesters atmospheric carbon, reaching a mean value of 59.79 tons / ha of mangrove
Resumo:
Agricultural management with chemicals may contaminate the soil with heavy metals. The objective of this study was to apply Principal Component Analysis and geoprocessing techniques to identify the origin of the metals Cu, Fe, Mn, Zn, Ni, Pb, Cr and Cd as potential contaminants of agricultural soils. The study was developed in an area of vineyard cultivation in the State of São Paulo, Brazil. Soil samples were collected and GPS located under different uses and coverings. The metal concentrations in the soils were determined using the DTPA method. The Cu and Zn content was considered high in most of the samples, and was larger in the areas cultivated with vineyards that had been under the application of fungicides for several decades. The concentrations of Cu and Zn were correlated. The geoprocessing techniques and the Principal Component Analysis confirmed the enrichment of the soil with Cu and Zn because of the use and management of the vineyards with chemicals in the preceding decades.
Resumo:
This thesis deals with the topic of Road Safety when maintaining its road elements. The aim of the work is the prioritization of maintenance for each barrier that depends on some factors that are related to the topography of the site, deformations, degradation of the composing elements, and the compliance of the barrier installation with the original situation. Based on these components a final coefficient by which the maintenance priority was highlighted, calculated, and associated to each barrier. For easy study and visualization, information was uploaded and processed in a GIS environment, in order to create analyses and choropleth maps. Analyses were exploited by using free and open-source GIS software, namely QGIS. Information on the barriers' features was registered with both on-site and online (i.e., web mapping providers) inspections. With regards to the on-site inspections, a complete geotagged photos database was created, in order to improve the survey. GIS potentialities were fully exploited by applying some geoprocessing tools which allowed deep analyses.