Estudo de dinâmicas populacionais aplicado a processos de tratamento biológico de efluentes

The purpose of this work is to perform studies of mathematical modeling of the relationship of interaction occurring between microrganisms participants from wastewater treatment processes aimed at understanding, through simulations, such as inter-relationships can affect the performance of such units. The methodology was the implementation in FORTRAN computer language of mathematical models of microbial interactions. The first model addresses the interaction of bacteria-forming flakes and filamentous bacteria in activated sludge systems, which seeks to strike a balance between these bacteria to improve efficiency of the process. Another model is studied the interaction between bacteria and protozoa in activated sludge systems and analyzing the efficiency of the process, observing the changes in daily load. Microbial interactions in anaerobic reactors were dealt a third model, in which there is the mutualistic interaction between acidogenic and methanogenic bacteria. In a fourth and final model was examined the relationship between the bacteria Acinetobacter sp. and Gordonia sp., which are present in activated sludge systems, showing the competitive capacity of Acinetobacter sp. can control the growth of unwanted bacteria.

Aplicações do modelo presa-predador ao estudo da influência da dinâmica populacional de espécies de sardinha, cavala e atum e sobre o processo de eutrofização marinha

A discussion concerning marine eutrophication, possible generated from an imbalance of fish population is presented. Simulations through a code in FORCE 2.0 considering a predator-prey model have been made and the numerical results for a three different fish species were plot in ORIGIN code. The populations considered in this study were: Sardines being prey and both mackerel and tuna being the sardine’s predators. Some hipotheses concerning to the marine eutrophication have being made according to the stages of the dynamics of the system. For situations were the prey’s populationis very low, the quality of the water experiences a strong depreciation leading to a possible eutrophication of the water.

Resolução de problema de valor no contorno associado ao projeto de reatores de fluxo disperso empregados no tratamento de efluentes

The objective of this work was to develop a numerical method to solve boundary value problems concerning to the use of dispersion model for describing the hydraulic behavior of chemical or biological reactors employed in the wastewater treatment. The numerical method was implemented in FORTRAN language generating a computational program which was applied to solve cases involving reaction kinetics of both integer and fractional orders. The developed method was able to solve the proposed problems evidencing to be a useful tool that provides more accurate design of wastewater treatment reactors

Estudo de placas elásticas pelo metodo dos elementos de contorno

Este trabajo tiene como objetivo principal oferecer una herramienta alternativa para la resolución de placas finas, presentes en edifícios, relacionadas con los métodos de cálculo adquiridos durante la universidad, calculo a través de tablas con pocas condiciones de controno. El método utilizado es el Método de los elementos de contorno que discretiza la placa en partes finitas, aproximando los resultados obtenidos a valores reales. En este trabajo se ha utilizado el programa de ordenador Placas2.for (TAGUTI,Y. 2010) basado en el Método de los elementos de contorno para la resolución de las placas finas con varias condiciones de contorno geométricas y de cargas

O efeito da autocorrelação no desempenho dos gráficos de X e R e dos gráficos de X e S²

Control charts are very important tools in statistical quality control of industrial processes and its use started last century. Since its development, the charts have always been attributed to independent processes, i.e. without any correlation between samples. But nowadays, with the high level of automation in the industrial environment, it is noticeable the autocorrelation factor between samples. The main Xcharts used in monitoring quality characteristics represented by continuous variables are the mean (X ), amplitude (R) and variance (S²). Therefore, this work aims to analyze the performance of X and R charts and in of X and S² charts with different sample sizes (4 and 5) for monitoring autocorrelated processes. Through computer simulations using the Fortran software and the use of mathematical expressions was possible to obtain data and performance analysis of the detection power charts for independent observations and for autocorrelated observations according to the model AR (1). The results show that the effect of autocorrelation reduces the ability of monitoring the control charts and that, the greater this effect, the slower the chart becomes in misfits signaling

Heurística especializada aplicada na alocação ótima de bancos de capacitores em sistemas de distribuição radial

Pós-graduação em Engenharia Elétrica - FEIS

Reconfiguração de sistemas de distribuição operando em vários níveis de demanda através de uma meta-heurística de busca em vizinhança variável

Pós-graduação em Engenharia Elétrica - FEIS

Gráficos de T² para o monitoramento de processos multivariados autocorrelacionados

In which refers to statistical process control, the analysis of univariate cases is not enough for many types of company, being necessary to resort to multivariate cases. Besides, it is usually supposed that the observations are independent. However, the violation of this hypothesis indicates the existence of autocorrelation in the process. In this work, by a basic quantitative approach for an exploratory and experimental research, the study target are the multivariate autocorrelated control charts, using Hotteling T². The ARL values were collected by simulations of a computational program on FORTRAN language, with objective of studying the charts properties, in addition to compare with the

Gráficos de T² para o monitoramento de processos multivariados autocorrelacionados

In which refers to statistical process control, the analysis of univariate cases is not enough for many types of company, being necessary to resort to multivariate cases. Besides, it is usually supposed that the observations are independent. However, the violation of this hypothesis indicates the existence of autocorrelation in the process. In this work, by a basic quantitative approach for an exploratory and experimental research, the study target are the multivariate autocorrelated control charts, using Hotteling T². The ARL values were collected by simulations of a computational program on FORTRAN language, with objective of studying the charts properties, in addition to compare with the

Tokamak TCABR: Acquisition system, data analysis, and remote participation using MDSplus

Each plasma physics laboratory has a proprietary scheme to control and data acquisition system. Usually, it is different from one laboratory to another. It means that each laboratory has its own way to control the experiment and retrieving data from the database. Fusion research relies to a great extent on international collaboration and this private system makes it difficult to follow the work remotely. The TCABR data analysis and acquisition system has been upgraded to support a joint research programme using remote participation technologies. The choice of MDSplus (Model Driven System plus) is proved by the fact that it is widely utilized, and the scientists from different institutions may use the same system in different experiments in different tokamaks without the need to know how each system treats its acquisition system and data analysis. Another important point is the fact that the MDSplus has a library system that allows communication between different types of language (JAVA, Fortran, C, C++, Python) and programs such as MATLAB, IDL, OCTAVE. In the case of tokamak TCABR interfaces (object of this paper) between the system already in use and MDSplus were developed, instead of using the MDSplus at all stages, from the control, and data acquisition to the data analysis. This was done in the way to preserve a complex system already in operation and otherwise it would take a long time to migrate. This implementation also allows add new components using the MDSplus fully at all stages. (c) 2012 Elsevier B.V. All rights reserved.

Experimental and numerical analysis of dry contact in the pin on disc test

The reduction of friction and wear in systems presenting metal-to-metal contacts, as in several mechanical components, represents a traditional challenge in tribology. In this context, this work presents a computational study based on the linear Archard's wear law and finite element modeling (FEM), in order to analyze unlubricated sliding wear observed in typical pin on disc tests. Such modeling was developed using finite element software Abaqus® with 3-D deformable geometries and elastic–plastic material behavior for the contact surfaces. Archard's wear model was implemented into a FORTRAN user subroutine (UMESHMOTION) in order to describe sliding wear. Modeling of debris and oxide formation mechanisms was taken into account by the use of a global wear coefficient obtained from experimental measurements. Such implementation considers an incremental computation for surface wear based on the nodal displacements by means of adaptive mesh tools that rearrange local nodal positions. In this way, the worn track was obtained and new surface profile is integrated for mass loss assessments. This work also presents experimental pin on disc tests with AISI 4140 pins on rotating AISI H13 discs with normal loads of 10, 35, 70 and 140 N, which represent, respectively, mild, transition and severe wear regimes, at sliding speed of 0.1 m/s. Numerical and experimental results were compared in terms of wear rate and friction coefficient. Furthermore, in the numerical simulation the stress field distribution and changes in the surface profile across the worn track of the disc were analyzed. The applied numerical formulation has shown to be more appropriate to predict mild wear regime than severe regime, especially due to the shorter running-in period observed in lower loads that characterizes this kind of regime.

Magnetohydrodynamic Effects On Mixed Convection Flows In Channels And Ducts

This work focuses on magnetohydrodynamic (MHD) mixed convection flow of electrically conducting fluids enclosed in simple 1D and 2D geometries in steady periodic regime. In particular, in Chapter one a short overview is given about the history of MHD, with reference to papers available in literature, and a listing of some of its most common technological applications, whereas Chapter two deals with the analytical formulation of the MHD problem, starting from the fluid dynamic and energy equations and adding the effects of an external imposed magnetic field using the Ohm's law and the definition of the Lorentz force. Moreover a description of the various kinds of boundary conditions is given, with particular emphasis given to their practical realization. Chapter three, four and five describe the solution procedure of mixed convective flows with MHD effects. In all cases a uniform parallel magnetic field is supposed to be present in the whole fluid domain transverse with respect to the velocity field. The steady-periodic regime will be analyzed, where the periodicity is induced by wall temperature boundary conditions, which vary in time with a sinusoidal law. Local balance equations of momentum, energy and charge will be solved analytically and numerically using as parameters either geometrical ratios or material properties. In particular, in Chapter three the solution method for the mixed convective flow in a 1D vertical parallel channel with MHD effects is illustrated. The influence of a transverse magnetic field will be studied in the steady periodic regime induced by an oscillating wall temperature. Analytical and numerical solutions will be provided in terms of velocity and temperature profiles, wall friction factors and average heat fluxes for several values of the governing parameters. In Chapter four the 2D problem of the mixed convective flow in a vertical round pipe with MHD effects is analyzed. Again, a transverse magnetic field influences the steady periodic regime induced by the oscillating wall temperature of the wall. A numerical solution is presented, obtained using a finite element approach, and as a result velocity and temperature profiles, wall friction factors and average heat fluxes are derived for several values of the Hartmann and Prandtl numbers. In Chapter five the 2D problem of the mixed convective flow in a vertical rectangular duct with MHD effects is discussed. As seen in the previous chapters, a transverse magnetic field influences the steady periodic regime induced by the oscillating wall temperature of the four walls. The numerical solution obtained using a finite element approach is presented, and a collection of results, including velocity and temperature profiles, wall friction factors and average heat fluxes, is provided for several values of, among other parameters, the duct aspect ratio. A comparison with analytical solutions is also provided, as a proof of the validity of the numerical method. Chapter six is the concluding chapter, where some reflections on the MHD effects on mixed convection flow will be made, in agreement with the experience and the results gathered in the analyses presented in the previous chapters. In the appendices special auxiliary functions and FORTRAN program listings are reported, to support the formulations used in the solution chapters.

Sea Level Variations from Decades to Millennia: A few Case Studies

The main goals of this Ph.D. study are to investigate the regional and global geophysical components related to present polar ice melting and to provide independent cross validation checks of GIA models using both geophysical data detected by satellite mission, and geological observations from far field sites, in order to determine a lower and upper bound of uncertainty of GIA effect. The subject of this Thesis is the sea level change from decades to millennia scale. Within ice2sea collaboration, we developed a Fortran numerical code to analyze the local short-term sea level change and vertical deformation resulting from the loss of ice mass. This method is used to investigate polar regions: Greenland and Antarctica. We have used mass balance based on ICESat data for Greenland ice sheet and a plausible mass balance for Antarctic ice sheet. We have determined the regional and global fingerprint of sea level variations, vertical deformations of the solid surface of the Earth and variations of shape of the geoid for each ice source mentioned above. The coastal areas are affected by the long wavelength component of GIA process. Hence understanding the response of the Earth to loading is crucial in various contexts. Based on the hypothesis that Earth mantle materials obey to a linear rheology, and that the physical parameters of this rheology can be only characterized by their depth dependence, we investigate the Glacial Isostatic Effect upon the far field sites of Mediterranean area using an improved SELEN program. We presented new and revised observations for archaeological fish tanks located along the Tyrrhenian and Adriatic coast of Italy and new RSL for the SE Tunisia. Spatial and temporal variations of the Holocene sea levels studied in central Italy and Tunisia, provided important constraints on the melting history of the major ice sheets.

Modello di calcolo per la valutazione delle prestazioni propulsive di un motore ibrido

Questo lavoro di tesi, svolto presso AVIO S.P.A, sede di Colleferro (RM), divisione spazio, si inserisce all'interno del progetto Theseus, che ha come scopo finale lo sviluppo di un dimostratore di un motore ibrido a combustibile solido e ossidante gassoso. In particolare, in questo momento è richiesto un codice di calcolo, preciso ma allo stesso tempo abbastanza contenuto nei tempi di calcolo, che permetta l'analisi e le previsioni della balistica interna di tale motore ibrido. Il codice di calcolo si basa su una versione già esistente per i motori a solido (CUBIC) scritto in ambiente FORTRAN, ed è stato riadattato ai motori ibridi. In particolare è stata scritta una routine per il calcolo della velocità di combustione che tiene conto di diversi fattori, tra cui blowing e il fenomeno di entrainment presente in superficie. Sempre per quanto riguarda la velocità di combustione, nel suo calcolo si tiene conto dell'impingement dell'iniettore sul grano e del valore locale (per quanto riguarda la temperatura di fiamma) dell'O/F. Inoltre è stato anche modellato il comportamento termodinamico delle eventuali protezioni termiche presenti internamente al motore, considerando tutti i fenomeni di pirolisi e ablazione che caratterizzano tali materiali. In fine il modello completo è stato testato e validato grazie al fatto che si disponeva di alcuni tiri al banco di un motore ibrido, effettuati presso il dipartimento di Ingegneria Aerospaziale dell'Università di Napoli Federico II.

Vibrational Relaxation of N2O (v2) by Atomic Oxygen Measured by Tunable Diode Laser Absorption Spectroscopy

Through the use of Transient Diode Laser Absorption Spectroscopy (TDLAS), the rate coefficient for the vibrational relaxation of N2O (ν2) by O(3P) at room temperature (32 ºC)) was determined to be (1.51 ± 0.11)x10-12 cm3molecule-1sec-1. A Q-switched, frequency quadrupled (266 nm) Nd:YAG laser pulse was used as the pump for this experiment. This pulse caused the photodissociation of O3 into O2 and O atoms.Excited oxygen (O(1D)) was collisionally quenched to ground state (O(3P)) by Ar and/or Xe. Photodissociation also caused a temperature jump within the system, exciting the ν2 state of N2O molecules. Population in the ν2 state was monitored through a TDLASobservation of a ν3 transition. Data were fit using a Visual Fortran 6.0 Global Fitting program. Analysis of room temperature data taken using only Ar to quench O atoms to the ground state gave the same rate coefficient as analysis of data taken using an Ar/Xe mixture, suggesting Ar alone is a sufficient bath gas. Experimentation was alsoperformed at -27 ºC and -82 ºC for a temperature dependence analysis. A linear regression analysis gave a rate coefficient dependence on temperature of ... for the rate coefficient of the vibrational relaxation of N2O (ν2) by atomic oxygen.