Chemical and morphological features of nanofilled composite resin: influence of finishing and polishing procedures and fluoride solutions

This study evaluated the influence of finishing and polishing procedures and differ-ent fluoride solutions on superficial morphology and chemistry of the nanofilled composite resinSupreme XT (3M) through the EDX analysis and SEM evaluation. Circular specimens (n 5 30) of 10mm diameter and 2 mm thickness were prepared, with half of the sample assays finished and polishedwith Super-Snap1sandpaper. The experimental groups were divided according to the presence or ab-sence of finishing and polishing and solutions (arti ficial saliva, 0.0 5% of manipulated sodium fluoridesolution, Fluordent Re ach, Oral B, Fluorgard). Specimens were immersed in each respective solutionfor 1 min per day, during 60 days and stored in artificial saliva at 37 6 18C between immersion peri-ods. Topography and chemical analysis was qualitative. It was observed that specimens submitted tofinishing and polishing procedures had lower superficial degradation. Fluoride solutio ns promoted su-perficial alterations on specimens, being the highest degradation obtained with Fluordent Reach. Itca n be concluded that finishing and polishing procedures and the immersion media influence the su-perficial morphology of composite resin tested; the Fluordent Reach was the flu oride solution thatmo st affected the material’s surface.

Effect of finishing and polishing on color stability of a nanofilled resin immersed in different media

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Source and frequency of dry season lipid supplementation of grazing, finishing cattle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Interaction Between Roughages and Corn Milling Byproducts in Finishing Cattle Diets

During ethanol production, starch is the primary nutrient fermented and the remaining byproducts are excellent sources of fiber and protein. In addition, inclusion of byproducts in finishing diets may reduce the incidence of acidosis. As a result, roughage level and quality could potentially be reduced in finishing diets containing byproducts. Three experiments were conducted to examine the effects of roughage and wet corn gluten feed (WCGF) in finishing cattle diets containing corn distillers grains plus solubles. Cattle fed finishing diets containing wet distillers grains plus solubles (WDGS) with no roughage had decreased DMI and ADG compared to cattle fed roughage. Within roughage level, ADG was similar for cattle fed alfalfa hay, corn silage or corn stalks when included on an equal NDF basis. Apparent total tract digestibility of OM, NDF, and CP linearly decreased and ruminal pH variables increased linearly due to increasing roughage levels. Roughage sources can be exchanged on an equal NDF basis in beef finishing diets containing 30% WDGS (DM basis). In finishing diets containing modified distillers grains plus solubles (MDGS), DMI linearly increased due to increasing roughage levels but ADG responded quadratically and was lowest for cattle fed diets without roughage. There was also a quadratic response for DMI and ADG due to WCGF inclusion level. Gain:feed decreased linearly with increasing roughage and WCGF inclusion levels. Feeding 15% WCGF resulted in similar cattle performance and carcass traits to cattle fed no WCGF in diets containing 30% MDGS, but cattle fed diets with 60% total byproduct inclusion made up of 30% WCGF and 30% MDGS had reduced performance (DM basis). Additionally, reducing corn silage inclusion level to 7.5% resulted in similar finishing cattle performance and carcass traits to cattle fed 15% corn silage in diets containing 30% MDGS with or without inclusion of WCGF. Elimination of roughage in diets containing either WDGS or MDGS resulted in negative impacts on finishing cattle performance, ruminal metabolism, and carcass traits.

Chemical and morphological features of nanofilled composite resin: Influence of finishing and polishing procedures and fluoride solutions

This study evaluated the influence of finishing and polishing procedures and different fluoride solutions on superficial morphology and chemistry of the nanofilled composite resin Supreme XT (3M) through the EDX analysis and SEM evaluation. Circular specimens (n = 30) of 10 mm diameter and 2 mm thickness were prepared, with half of the sample assays finished and polished with Super-Snap (R) sandpaper. The experimental groups were divided according to the presence or absence of finishing and polishing and solutions (artificial saliva, 0.05% of manipulated sodium fluoride solution, Fluordent Reach, Oral B, Fluorgard). Specimens were immersed in each respective solution for 1 min per day, during 60 days and stored in artificial saliva at 37 +/- 1 degrees C between immersion periods. Topography and chemical analysis was qualitative. It was observed that specimens submitted to finishing and polishing procedures had lower superficial degradation. Fluoride solutions promoted superficial alterations on specimens, being the highest degradation obtained with Fluordent Reach. It can be concluded that finishing and polishing procedures and the immersion media influence the superficial morphology of composite resin tested; the Fluordent Reach was the fluoride solution that most affected the material's surface. Microsc. Res. Tech. 2011., (c) 2011 Wiley Periodicals, Inc.

Effects of Initial Body Condition, Frame Size and Concentration of Dietary Energy on Performance of Finishing Steers

Steers were sorted into four groups based on hip height and fat cover at the start of the finishing period. Each group of sorted steers was fed a diet containing 0.59 or 0.64 Mcal NEg per pound of diet. Steers with less initial fat cover (.08 in.) gained slightly faster, consumed less feed, and therefore tended to be more efficient than steers with greater finish (.16 in.). Steers fed the lower-energy diet consumed more feed, gained similarly, and were less efficient than steers fed the higher-energy diet. The NRC computer model to evaluate beef cattle diets underpredicted performance of cattle in this experiment, but accurately predicted the differences in gain and feed efficiency observed between the leaner and fatter steers and between the two diets. In this study, the shorter steers (49.4 vs 52.2 in. initial height at the hip) gained faster with slightly greater feed intake and the same feed conversion.

Effect of Optimum® High Oil Corn on Performance and Carcass Characteristics of Finishing Yearling Steers

Steers fed Optimum® high oil corn had statistically similar live performance as steers fed isogenetic control corn or the control corn + fat. Numerically steers fed high oil corn gained 3% faster during the 107-day study with similar feed conversion. During the first half of the experiment, steers fed high oil corn did not perform as well as those fed control corn. During the second half of the experiment, steers fed high oil corn gained 21% faster and were 17% more efficient. There were no effects of feeding high oil corn on carcass characteristics, except there were more Choice carcasses from the steers fed high oil corn as compared with control corn (57% vs. 43% Choice).

Evaluation of a Mixture of Corn Steep Liquor and Distillers Solubles as a Replacement for Corn and Supplement in Cattle Finishing Diets

Finishing yearling steers fed a corn-based diet containing steep liquor had statistically similar live performance as steers fed the control diet. Numerically steers fed the steep containing diet were 6% more efficient. Steers fed steep liquor tended to contain less carcass fat (as measured by intramuscular marbling) less kidney, heart and pelvic fat, and less backfat thickness. When priced at $50/ton adding steep liquor at 10% of diet dry matter reduced feed cost for gain 9%.

Value of High-Oil and High-Protein Corn Grains for Finishing Cattle

Three specialty corns, high oil, high protein and high oil with high protein, were compared with control corn in a 113-day steer feeding trial. During the first 63 days of the study, steers fed the corns containing more oil had slower gain and poorer feed conversion compared with the control corn. At the end of the trial there were no statistically significant differences in performance of steers fed the different corns. Steers fed the high protein corn tended to have higher grading carcasses compared with those fed the control corn. Otherwise there were no differences in carcass measurements due to source of corn fed the steers. Feed cost of gain was reduced with the high-protein corn and the corn with high fat and high protein compared with the control corn because of similar feed conversions and the reduced amount of soybean meal needed to supplement the specialty corns.

Responses to Adding Fat to Corn-Based Diets Supplemented with Urea and Soybean Meal for Finishing Steers

Yearling steers were fed corn-based diets supplemented with urea or soybean meal plus urea, and none, 2%, or 4% fat. All steers were implanted with Revalorâ-S and fed for 118 days. Adding fat did not improve performance of the steers in the feedlot or improve carcass characteristics. Feeding soybean meal increased rate of gain, improved feed efficiency, increased carcass weight, and tended to improve carcass quality grades compared with feeding urea. Adding 4% fat decreased feed intake, suggesting that corn-based diets may contain enough oil to approach the quantity of fat that can be utilized effectively in a ruminant diet.

The Effects of Feeding a Live Microbial Product on Feedlot Performance and Carcass Value of Finishing Steers Fed Wet Corn Gluten Feed

This experiment was conducted to evaluate the efficacy of daily feeding a live microbial preparation containing two live organisms to finishing cattle. One organism was a lactobacillus, and the other was a propionibacterium, thought to work in concert to improve fermentation in the rumen and overall digestion. The study was conducted with Angus steers with an average initial weight of 550 lbs that were fed a finishing ration containing 50% wet corn gluten feed on a dry basis for 184 days. Feeding the microbial product improved daily gain and feed efficiency 1.7% and 2.4%, respectively, but the differences were not statistically significant. The microbial preparation increased carcass weights 1% but had no effects on quality or yield grades. It is concluded that potential benefits of this product are more likely to be greater when cattle are fed high grain rations rather than diets containing high concentrations of corn gluten feed.

Relative Value of White Corn When Fed to Finishing Cattle and Its Effects on Color of Carcass Fat

White corn was compared with yellow corn in a 180-day finishing trial with 600 lb. Angus steers fed 90% concentrate diets. Steers fed yellow corn consumed 3.3% less feed and were 3.8% more efficient in feed utilization. Rate of gain and carcass characteristics were similar for steers fed white or yellow corn. The color of subcutaneous fat over the ribs was significantly whiter from carcasses of steers fed white corn compared with those fed yellow corn. The results of this study indicate that white corn may be used instead of barley to produce whiter fat in beef carcasses.

Effect of Frame Size and Hormone Implant on Performance and Carcass Characteristics of Finishing Yearling Heifers: Returns to a Value-Based Market

Four groups of yearling heifers representing different frame sizes—small, medium, and large Angus and medium Simmental—were fed high-grain finishing diets to average Low Choice quality grade. Half the heifers were implanted with estrogen and trenbolone acetate. Backfat and ribeye area were measured by ultrasound four times during the study to assess growth of muscle and fat. Increasing frame size resulted in increased feed intake, greater rates of gain, and a trend towards reduced feed conversion. Greater returns would have been realized from each of the four groups had they been sold in a premium market based on yield grade rather than the conventional grade and yield market. Increasing frame size resulted in greater returns to the value-based market. Implants increased rate of gain and improved feed conversion but did not result in significantly greater returns to the value-based market compared with the grade and yield market. Ribeye area and backfat increased with body weight and time on feed. Increase in ribeye area was linear with time, whereas accumulation of backfat was exponential. Rate of increase in area of ribeye tended to increase and backfat tended to decrease as frame size increased. Implants increased rate of increase in ribeye area but had no effect on rate of deposition of subcutaneous fat. Equations describing growth of ribeye area and backfat for each group predicted average growth for the heifers but did not predict growth of individual heifers. Final carcass yield grade was related to initial thickness of backfat but not to initial ribeye area. These results indicate that the type of cattle selected to be fed for a premium market based on yield grade is important to the success of the program. More work is needed to develop growth equations from ultrasound measurements, but ultrasound will likely be a useful tool in selecting feeder cattle for a value-based market.

Potential Value of Ultrasound to Sort Feeder Cattle into More Uniform Groups for Finishing and Marketing

Cattle in three experiments were scanned with ultrasound as feeders to measure ribeye area and thickness of fat cover to determine if cattle could be sorted into outcome groups with respect to carcass yield. Sorting the cattle into low fat cover or large ribeye groups resulted in improved carcass yield grades. There were no effects on carcass quality grades related to sorting of the cattle. Cattle with greater fat cover at the beginning of the feeding period were heavier, seemed to be more mature and had less muscle growth during the finishing period. There were no significant differences in gain among the groups, but cattle with more fat cover had poorer feed efficiency. Ultrasound seems to have potential to sort feeder cattle, but before it can be used in practice, growth curves need to be developed to predict final end points of individual cattle.