Síntese hidrotérmica assistida por micro-ondas de tiO2, e aplicação em nanocompósito

In recent decades have seen a sharp growth in the study area of nanoscience and nanotechnology and is included in this area, the study of nanocomposites with self-cleaning properties. Since titanium dioxide (TiO2) has high photocatalytic activity and also antimicrobial, self-cleaning surfaces in your application has been explored. In this study a comparison was made between two synthesis routes to obtain TiO2 nanoparticles by hydrothermal method assisted by microwave. And after analysis of XRD and SEM was considered the best material for use in nanocomposites. It was deposited nanocomposite film of poly (dimethyl siloxane) (PDMS) with 0.5, 1, 1.5 and 2% by weight of nanoparticles of titanium dioxide (TiO2) by the spraying method. The nanocomposite was diluted with hexane and the suspension was deposited onto glass substrate, followed by curing in an oven with forced air circulation. The photocatalytic activity of the nanocomposite impregnated with methylene blue was evaluated by UV- vis spectroscopy from the intensity variation of absorption main peak at 660nm with time of exposure to the UV chamber. Changes in the contact angle and microhardness were analyzed before and after UV aging test. The effect of ultraviolet radiation on the chemical structure of the PDMS matrix was evaluated by spectrophotometry Fourier transform infrared (FTIR).The results indicated that the addition of TiO2 nanoparticles in the coating PDMS gave high photocatalytic activity in the decomposition of methylene blue, an important characteristic for the development of self-cleaning coatings

Análise paramétrica da simulação composicional do processo de Drenagem Gravitacional Assistida por Gás (GAGD)

In Brazil and around the world, oil companies are looking for, and expected development of new technologies and processes that can increase the oil recovery factor in mature reservoirs, in a simple and inexpensive way. So, the latest research has developed a new process called Gas Assisted Gravity Drainage (GAGD) which was classified as a gas injection IOR. The process, which is undergoing pilot testing in the field, is being extensively studied through physical scale models and core-floods laboratory, due to high oil recoveries in relation to other gas injection IOR. This process consists of injecting gas at the top of a reservoir through horizontal or vertical injector wells and displacing the oil, taking advantage of natural gravity segregation of fluids, to a horizontal producer well placed at the bottom of the reservoir. To study this process it was modeled a homogeneous reservoir and a model of multi-component fluid with characteristics similar to light oil Brazilian fields through a compositional simulator, to optimize the operational parameters. The model of the process was simulated in GEM (CMG, 2009.10). The operational parameters studied were the gas injection rate, the type of gas injection, the location of the injector and production well. We also studied the presence of water drive in the process. The results showed that the maximum vertical spacing between the two wells, caused the maximum recovery of oil in GAGD. Also, it was found that the largest flow injection, it obtained the largest recovery factors. This parameter controls the speed of the front of the gas injected and determined if the gravitational force dominates or not the process in the recovery of oil. Natural gas had better performance than CO2 and that the presence of aquifer in the reservoir was less influential in the process. In economic analysis found that by injecting natural gas is obtained more economically beneficial than CO2

Estudo da perda de carga e calor no poço injetor no processo De drenagem gravitacional assistida por vapor (SAGD)

The oil companies in the area in general are looking for new technologies that can increase the recovery factor of oil contained in reservoirs. These investments are mainly aimed at reducing the costs of projects which are high. Steam injection is one of these special methods of recovery in which steam is injected into the reservoir in order to reduce the viscosity of the oil and make it more mobile. The process assisted gravity drainage steam (SAGD) using steam injection in its mechanism, as well as two parallel horizontal wells. In this process steam is injected through the horizontal injection well, then a vapor chamber is formed by heating the oil in the reservoir and, by the action of gravitational forces, this oil is drained down to where the production well. This study aims to analyze the influence of pressure drop and heat along the injection well in the SAGD process. Numerical simulations were performed using the thermal simulator STARS of CMG (Computer Modeling Group). The parameters studied were the thermal conductivity of the formation, the flow of steam injection, the inner diameter of the column, the steam quality and temperature. A factorial design was used to verify the influence of the parameters studied in the recovery factor. We also analyzed different injection flow rates for the model with pressure drop and no pressure drop, as well as different maximum flow rates of oil production. Finally, we performed an economic analysis of the two models in order to check the profitability of the projects studied. The results showed that the pressure drop in injection well have a significant influence on the SAGD process.

Dose inseminante para fertilização artificial de ovócitos de dourado

Objetivou-se determinar a dose inseminante adequada para uso na fertilização artificial de ovócitos de dourado (Salminus brasiliensis). Os ovócitos foram distribuídos em delineamento inteiramente casualizado, e fertilizados com uma das relações espermatozoides/ovócito 6,0×10³; 6,0×10(4); 6,0×10(5); 6,0×10(6) ou 3,0×10(7), cada uma com quatro repetições. Considerou-se unidade experimental uma incubadora de volume útil de 2,5 L, contendo 2,0 mL de ovócitos não-hidratados. As taxas de fertilização foram mensuradas 8 horas após o início da fertilização. Com intuito de verificar possíveis efeitos da diluição seminal na movimentação dos espermatozoides, realizou-se a mensuração do tempo de duração da motilidade espermática dos espermatozoides de dourado, ativados por meio de diferentes relações de diluição: 6,8×10-5; 6,8×10-4; 6,8×10-3; 6,8×10-2; 3,4×10-1 e 1,0 mL de sêmen por mL de água. O tempo de duração da motilidade foi avaliado em delineamento inteiramente casualizado composto de seis tratamentos e três repetições. As taxas de fertilização apresentaram relação quadrática com o número de espermatozoides por ovócito. As relações de diluição do sêmen tiveram efeito inversamente proporcional sobre a duração da motilidade espermática. A relação que proporcionou melhores taxas de fertilização artificial de ovócitos de dourado (Salminus brasiliensis) foi de 30.722 espermatozoides por ovócio.

Produtividade de híbridos de cebola em função da população de plantas e da fertilização nitrogenada e potássica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mapeamento das formas do relevo para estimativa de custos de fertilização em cana-de-açúcar

A modelagem matemática associada ao conhecimento da variabilidade dos atributos do solo e mapeamento das formas do relevo pode auxiliar no manejo da fertilidade do solo em usinas sucroalcooleiras. O presente trabalho teve como objetivo avaliar o uso da geoestatística e da modelagem matemática na estimativa de custos de fertilização, em diferentes formas do relevo. em uma área de 200 ha, foram identificadas duas formas de relevo, uma côncava e outra convexa, sendo os solos coletados nos pontos de cruzamento de uma malha, com intervalos regulares de 50 m, perfazendo um total de 623 pontos. As amostras foram submetidas a análises químicas, e, posteriormente, os dados foram avaliados por meio da estatística descritiva, geoestatística e modelagem matemática. Os resultados mostraram que, quando as formas do relevo são incorporadas às análises geoestatística e de modelagem matemática, ocorre aumento na eficiência de aplicação do calcário, fósforo e potássio no solo.

Ovário-histerectomia vídeo-assistida com único portal em cadelas: estudo retrospectivo de 20 casos

O objetivo do presente estudo foi avaliar retrospectivamente as 20 primeiras ovário-histerectomias vídeo-assistidas com único portal (SPVA-OSH), realizadas por um cirurgião não proficiente nessa técnica. Vinte cadelas foram submetidas à laparoscopia para SPVA-OSH, com o auxílio de um endoscópio de 10mm, com canal de trabalho de 5mm, inserido por um trocarte, posicionado na região pré-púbica, e coagulação bipolar. O tempo cirúrgico médio foi de 22,95±5,17 minutos. Os cinco primeiros procedimentos consumiram mais tempo cirúrgico do que os demais. A abordagem aos pedículos ovarianos direito e esquerdo foram as etapas que apresentaram maior tempo de execução. Houve complicação leve ou moderada em seis (30%) das 20 cadelas operadas. As complicações foram: hemorragia leve ou moderada em um dos pedículos ovarianos em quatro (20%) cadelas e hemorragia grave, devido à punção do baço com agulha de Veress em dois (10%) animais. A SPVA-OSH foi realizada em cadelas por um cirurgião no início da curva de aprendizado, sem complicações maiores.

Efeitos de peixes zooplanctívoros e onívoros sobre a resposta de comunidades planctônicas à fertilização por nutrientes

The food chain theory predict that presence of omnivory prevent the trophic cascade and could be a strong stabilizing factor over resource and consumer community dynamics, and that the nutrient enrichment destabilize populations dynamics. Most of the freshwater tropical reservoirs are eutrophic, and strategies that seek improve the water quality through the control of phytoplankton biomass and nutrient input, become essential for the improvement and preservation of water quality. The aim of this study was test the zooplanktivory (when larvae) and omnivory (when young and adult) effects of Nile Tilapia over the structure and dynamics of plankton communities, in addition or absence of nutrients enrichment. For this, one field experiment was performed with a factorial design 2x3 resulting in six treatments: control, without fish and nutrient (C); with omnivorous fish (O); with zooplanktivorous fish (Z); without fish and with enrichment of nutrients (NP); with omnivorous fish and nutrients (ONP); and, with zooplanktivorous fish and nutrients (ZNP). The two planktivory types reduced the zooplankton biomass and increased the phytoplankton biomass, but the omnivory of filter-feeding fish attenuated the trophic cascade magnitude. The fertilization by nutrients increases the nutrient concentrations in water and the phytoplankton biomass, but the effect on zooplankton is dependent of the trophic structure. In a general way, the effects of the fish and nutrient addition were addictive, but significant interactions among those factors were observed in the answer of some zooplankton groups. The effects of omnivorous fish over the temporal variability of phytoplankton and zooplankton biomass were very variable, the increase or reduce in variability of the plankton depending of the level of nutrients and of the analyzed variable. With base in this study, we conclude that the planktivory type exercised by the fish and the concentrations of nutrients in the water affects the force of pelagic trophic cascades and probably the success of biomanipulation programs for the handling of water quality in lakes and tropical reservoirs

Fertilização nitrogenada, densidade de plantas e rendimento de milho cultivado no sistema plantio direto

In maize (Zea mays L.), the inadequate nitrogen supply and planting density are considered limiting factors to the grain yield. The objective of this study was to evaluate the influence of different nitrogen levels and plant densities to the maize yield components and productivity. The experiment was carried out in the Cerrado region, located in the southern of the Maranhao State, Brazil, in a clay Oxisol (Ustox), cropped under the no-tillage system for six years. The randomized completed blocks experimental design with four replications was used, with treatments arrangement in a 5 x 4 factorial. The treatments were a combination of five doses of nitrogen as urea (0, 50, 100, 150 and 200 kg ha(-1)) and four plant densities (25,000; 50,000; 75,000 and 100,000 plants he). The grain number and mass per spike and grain mass per plant were improved by increased N and decreased plant density. Higher incomes of grains were obtained with adding concomitantly in N doses and in plants density. The maximum grain yield (11,9 Mg ha(-1)) was obtained with 120 kg ha(-1) of N and 83,000 plants ha(-1).

Fertilização potássica na cultura do alho vernalizado

O objetivo do presente trabalho foi verificar a validade do parcelamento da adubação potássica, bem como a época mais adequada de aplicação, no controle do superbrotamento e no desenvolvimento e produção de bulbos na cultura do alho vernalizado (cv. Roxo Pérola de Caçador). Foram instalados dois experimentos em estufa agrícola, em vasos de cimento amianto com capacidade para 55 L de terra. O experimento 1 consistiu de sete épocas de aplicação da metade da dose de potássio necessária para a cultura, aos 50, 60, 70, 81, 91, 101 e 111 dias após a emergência (dae), sendo que o experimento 2 consistiu da aplicação de quatro doses de potássio no plantio combinadas a outras quatro em cobertura, aos 81 dae. O parcelamento da adubação potássica em diferentes estádios de desenvolvimento não influenciou a produção de bulbos e o superbrotamento na cultura do alho. A absorção de potássio, cálcio e magnésio pelas plantas foi influenciada pela adubação potássica no plantio e em cobertura, observando-se um efeito antagônico do potássio sobre a absorção de cálcio e magnésio. A elevação no nível de potássio no solo por ocasião do plantio proporcionou aumento na produção de bulbos, sendo que esta não foi influenciada por variações na dose de adubação potássica em cobertura.

Estudo da recuperação de óleo por drenagem gravitacional assistida por injeção de vapor

Steam assisted gravity drainage process (SAGD) involves two parallel horizontal wells located in a same vertical plane, where the top well is used as steam injector and the bottom well as producer. The dominant force in this process is gravitational. This improved oil recovery method has been demonstrated to be economically viable in commercial projects of oil recovery for heavy and extra heavy oil, but it is not yet implemented in Brazil. The study of this technology in reservoirs with characteristics of regional basins is necessary in order to analyze if this process can be used, minimizing the steam rate demand and improving the process profitability. In this study, a homogeneous reservoir was modeled with characteristics of Brazilian Northeast reservoirs. Simulations were accomplished with STARS , a commercial software from Computer Modelling Group, which is used to simulate improved oil recovery process in oil reservoirs. In this work, a steam optimization was accomplished in reservoirs with different physical characteristics and in different cases, through a technical-economic analysis. It was also studied a semi-continuous steam injection or with injection stops. Results showed that it is possible to use a simplified equation of the net present value, which incorporates earnings and expenses on oil production and expenses in steam requirement, in order to optimize steam rate and obtaining a higher net present value in the process. It was observed that SAGD process can be or not profitable depending on reservoirs characteristics. It was also obtained that steam demand can still be reduced injecting in a non continuous form, alternating steam injection with stops at several time intervals. The optimization of these intervals allowed to minimize heat losses and to improve oil recovery

Ver, lembrar e narrar: a conformação das memórias sobre a ditadura militar na recepção assistida do audiovisual

Subjective and socially constructed instance, the memory is not a natural phenomenon, but an area of contention between various social organizations for control and legitimation of a past. With the development of writing and the advent of new technical devices, it creates new ways to store and transport information. The memory is no longer restricted to the limits of the here and now of the subject and undergoes transformations. In this scenario, the media start to play an important role in publicizing and construction of embodiments of memory. This study aims to analyze the conformation of the memory of political groups during the process of receiving audiovisual fiction. For this purpose, a corpus of four chapters of the soap opera Love and Revolution was used as a cognitive device for remembering. The television series, broadcast by SBT between April 2011 and January 2012, went back to the beginning and development of the military dictatorship in Brazil, in the cities of Rio de Janeiro and São Paulo. Three militants of various affiliations Communists who acted against the regime in Rio Grande do Norte and neighboring states, were participants in this study. Using the method of oral history, the research was divided into two stages: in-depth interviews, which dealt with the history of life of employees with the militancy in the Communist parties and other social movements, and the assistance of a drive dramatic soap opera Love and Revolution. Comparing these two phases of the study, we analyze the flow of mediations that crossed memories of militancy and media framework; shifts the narrative of remembrance during reception, and the opposition between memory and represented the experiences of the receivers

Significados de família para adolescentes em liberdade assistida

Guided by the social-historical perspective, this research aimed to understand how the adolescents in Assisted Freedom measure have meaning the family institution. The Pastoral Minor, located in the city of Natal, was chosen as space of investigation, whose social-educative program is the source of our concerns about the attendance of adolescents in conflict with law. The corpus was accomplished, mainly, through the individual semi- structured interview with four adolescents and seven of their relatives that participated of the research. We use another instruments to constitute the corpus, like the documental research of the technical reports on the participants of program files, and the registered notes in the field diary. As resource to data treatment, we use the Thematic Content Analysis. The data discussion was focused on the three thematic units that emerged: Family, Social-Educational Measure, Family and Social-Educational Measure. On the adolescents perspective, the family configures as a group based on the existence of affective bonds. Despite of the vulnerability of their familiar reality and their wish for freedom with their peers, the affective bonds revealed it as being important in their lives. This study, glimpse possibilities to contribute for the construction of public politics and attendance programs, that can be closer of the social-familiar reality of the adolescents who are in conflict with the law and, in this case, to promote their access to the statute of subjects of rights

Síntese e caracterização de carreadores de oxigênio para combustão com recirculação química obtidos via reação de combustão assistida por microondas

Perovskites oxides win importance by its properties and commercials applications, they have a high thermal stability, have conductive properties, electrical, catalytic, electro catalytic, optical and magnetic, and are thermally stable. Because of these properties, are being widely studied as carriers of oxygen in the process of power generation with CO2 capture. In this work, the base carrier system La1-xMexNiO3 (Me = Ca and Sr) were synthesized by the method via the combustion reaction assisted by microwave. were synthesized from the combustion reaction method by microwave process. This method control the synthesi`s conditions to obtain materials with specific characteristics. The carriers calcined at 800 ° C/2h were analyzed by thermal analysis (TG-DTA), to verify its thermal stability, X-ray diffraction (XRD) to verify the phase formation, with subsequent refinement by the Rietveld method, to quantify the percentage of phases formed, the surface area by BET method was determined, scanning electron microscopy (SEM) was obtained to evaluate the material morphology and temperature programmed reduction (TPR) was done to observe the metallic phase of the nickel. After all proposed characterization and analysis of their results can be inferred to these oxides, key features so that they can be applied as carriers for combustion reactions in chemical cycles. The final products showed perovskite-type structures K2NiF4 (main) and ABO3.

Caracterização dos eletrocatalisadores LaMnO3, LaFeO3, LaFe0,2Mn0,8O3 E La0,5Fe0,5MnO3 preparados por autocombustão assistida por microondas para cátodos de células a combustível do tipo SOFC

Materials consisting of perovskite-type oxides (ABO3) have been developed in this work for applications in fuel cell cathodes of solid oxide type (SOFC). These ceramic materials are widely studied for this type of application because they have excellent electrical properties, conductivity and electrocatalytic. The oxides LaMnO3, LaFeO3, LaFe0.2Mn0.8O3 e La0.5Fe0.5MnO3 were synthesized by the method of microwave assisted combustion and after sintering at 800°C in order to obtain the desired phases. The powders were characterized by thermogravimetry (TG), X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM) and voltammetric analysis (cyclic voltammetry and polarization curves). The results obtained by XRF technique showed that the microwave synthesis method was effective in obtaining doping oxides with values near stoichiometric. In general, powders were obtained with particle size less than 0.5 μm, having a porous structure and uniform particle size distribution. The particles showed spherical form, irregular and crowded of varying sizes, according to the analysis of SEM. The behavior of the oxides opposite the thermal stability was monitored by thermogravimetric curves (TG), which showed low weight loss values for all samples, especially those of manganese had its structure. By means of Xray diffraction of the samples sintered at 800°C was possible to observe the formation of powders having high levels of crystallinity. Furthermore, undesirable phases such as La2O3 and MnOx were not identified in the diffractograms. These phases block the transport of oxygen ions in the electrode/electrolyte interface, affecting the electrochemical activity of the system. The voltammetric analysis of the electrocatalysts LF-800, LM-800, LF2M8-800 e L5F5M-800 revealed that these materials are excellent electrical conductors, because it increased the passage of electrical current of the working electrode significantly. Best performance for the oxygen reduction reaction was observed with iron-rich structures, considering that the materials obtained have characteristics suitable for use in fuel cell cathodes of solid oxide type