The LTTE Proposals for an Interim Self-Governing Authority and Future of the Peace Process in Sri Lanka

The political brinkmanship of the Liberation Tigers of the Tamil Eelam has been illustrated vividly by the way in which it brought forward its proposals for an Interim Self-Governing Authority by exploiting the vulnerabilities of the United National Front Government. In the proposals the LTTE articulated its political intentions in concrete constitutional terms for the first time. The Proposals rationalize the armed struggle and a contractual agreement outside the Constitution. The plenary powers of the ISGA exceed the federal formula; effectively exclude the institutions of the state of Sri Lanka from the North-East; and clear the route for a separate state. This situation demands a redirection of the peace process which requires a clear political vision and a proper strategy with alternative proposals on the part of the government. In the face of present impasse of the peace process the challenges before the new Freedom Alliance government are formidable.

Photon Management Structures for Absorption Enhancement in Intermediate Band Solar Cells and Crystalline Silicon Solar Cells

El objetivo de la tesis es investigar los beneficios que el atrapamiento de la luz mediante fenómenos difractivos puede suponer para las células solares de silicio cristalino y las de banda intermedia. Ambos tipos de células adolecen de una insuficiente absorción de fotones en alguna región del espectro solar. Las células solares de banda intermedia son teóricamente capaces de alcanzar eficiencias mucho mayores que los dispositivos convencionales (con una sola banda energética prohibida), pero los prototipos actuales se resienten de una absorción muy débil de los fotones con energías menores que la banda prohibida. Del mismo modo, las células solares de silicio cristalino absorben débilmente en el infrarrojo cercano debido al carácter indirecto de su banda prohibida. Se ha prestado mucha atención a este problema durante las últimas décadas, de modo que todas las células solares de silicio cristalino comerciales incorporan alguna forma de atrapamiento de luz. Por razones de economía, en la industria se persigue el uso de obleas cada vez más delgadas, con lo que el atrapamiento de la luz adquiere más importancia. Por tanto aumenta el interés en las estructuras difractivas, ya que podrían suponer una mejora sobre el estado del arte. Se comienza desarrollando un método de cálculo con el que simular células solares equipadas con redes de difracción. En este método, la red de difracción se analiza en el ámbito de la óptica física, mediante análisis riguroso con ondas acopladas (rigorous coupled wave analysis), y el sustrato de la célula solar, ópticamente grueso, se analiza en los términos de la óptica geométrica. El método se ha implementado en ordenador y se ha visto que es eficiente y da resultados en buen acuerdo con métodos diferentes descritos por otros autores. Utilizando el formalismo matricial así derivado, se calcula el límite teórico superior para el aumento de la absorción en células solares mediante el uso de redes de difracción. Este límite se compara con el llamado límite lambertiano del atrapamiento de la luz y con el límite absoluto en sustratos gruesos. Se encuentra que las redes biperiódicas (con geometría hexagonal o rectangular) pueden producir un atrapamiento mucho mejor que las redes uniperiódicas. El límite superior depende mucho del periodo de la red. Para periodos grandes, las redes son en teoría capaces de alcanzar el máximo atrapamiento, pero sólo si las eficiencias de difracción tienen una forma peculiar que parece inalcanzable con las herramientas actuales de diseño. Para periodos similares a la longitud de onda de la luz incidente, las redes de difracción pueden proporcionar atrapamiento por debajo del máximo teórico pero por encima del límite Lambertiano, sin imponer requisitos irrealizables a la forma de las eficiencias de difracción y en un margen de longitudes de onda razonablemente amplio. El método de cálculo desarrollado se usa también para diseñar y optimizar redes de difracción para el atrapamiento de la luz en células solares. La red propuesta consiste en un red hexagonal de pozos cilíndricos excavados en la cara posterior del sustrato absorbente de la célula solar. La red se encapsula en una capa dieléctrica y se cubre con un espejo posterior. Se simula esta estructura para una célula solar de silicio y para una de banda intermedia y puntos cuánticos. Numéricamente, se determinan los valores óptimos del periodo de la red y de la profundidad y las dimensiones laterales de los pozos para ambos tipos de células. Los valores se explican utilizando conceptos físicos sencillos, lo que nos permite extraer conclusiones generales que se pueden aplicar a células de otras tecnologías. Las texturas con redes de difracción se fabrican en sustratos de silicio cristalino mediante litografía por nanoimpresión y ataque con iones reactivos. De los cálculos precedentes, se conoce el periodo óptimo de la red que se toma como una constante de diseño. Los sustratos se procesan para obtener estructuras precursoras de células solares sobre las que se realizan medidas ópticas. Las medidas de reflexión en función de la longitud de onda confirman que las redes cuadradas biperiódicas consiguen mejor atrapamiento que las uniperiódicas. Las estructuras fabricadas se simulan con la herramienta de cálculo descrita en los párrafos precedentes y se obtiene un buen acuerdo entre la medida y los resultados de la simulación. Ésta revela que una fracción significativa de los fotones incidentes son absorbidos en el reflector posterior de aluminio, y por tanto desaprovechados, y que este efecto empeora por la rugosidad del espejo. Se desarrolla un método alternativo para crear la capa dieléctrica que consigue que el reflector se deposite sobre una superficie plana, encontrándose que en las muestras preparadas de esta manera la absorción parásita en el espejo es menor. La siguiente tarea descrita en la tesis es el estudio de la absorción de fotones en puntos cuánticos semiconductores. Con la aproximación de masa efectiva, se calculan los niveles de energía de los estados confinados en puntos cuánticos de InAs/GaAs. Se emplea un método de una y de cuatro bandas para el cálculo de la función de onda de electrones y huecos, respectivamente; en el último caso se utiliza un hamiltoniano empírico. La regla de oro de Fermi permite obtener la intensidad de las transiciones ópticas entre los estados confinados. Se investiga el efecto de las dimensiones del punto cuántico en los niveles de energía y la intensidad de las transiciones y se obtiene que, al disminuir la anchura del punto cuántico respecto a su valor en los prototipos actuales, se puede conseguir una transición más intensa entre el nivel intermedio fundamental y la banda de conducción. Tomando como datos de partida los niveles de energía y las intensidades de las transiciones calculados como se ha explicado, se desarrolla un modelo de equilibrio o balance detallado realista para células solares de puntos cuánticos. Con el modelo se calculan las diferentes corrientes debidas a transiciones ópticas entre los numerosos niveles intermedios y las bandas de conducción y de valencia bajo ciertas condiciones. Se distingue de modelos de equilibrio detallado previos, usados para calcular límites de eficiencia, en que se adoptan suposiciones realistas sobre la absorción de fotones para cada transición. Con este modelo se reproducen datos publicados de eficiencias cuánticas experimentales a diferentes temperaturas con un acuerdo muy bueno. Se muestra que el conocido fenómeno del escape térmico de los puntos cuánticos es de naturaleza fotónica; se debe a los fotones térmicos, que inducen transiciones entre los estados excitados que se encuentran escalonados en energía entre el estado intermedio fundamental y la banda de conducción. En el capítulo final, este modelo realista de equilibrio detallado se combina con el método de simulación de redes de difracción para predecir el efecto que tendría incorporar una red de difracción en una célula solar de banda intermedia y puntos cuánticos. Se ha de optimizar cuidadosamente el periodo de la red para equilibrar el aumento de las diferentes transiciones intermedias, que tienen lugar en serie. Debido a que la absorción en los puntos cuánticos es extremadamente débil, se deduce que el atrapamiento de la luz, por sí solo, no es suficiente para conseguir corrientes apreciables a partir de fotones con energía menor que la banda prohibida en las células con puntos cuánticos. Se requiere una combinación del atrapamiento de la luz con un incremento de la densidad de puntos cuánticos. En el límite radiativo y sin atrapamiento de la luz, se necesitaría que el número de puntos cuánticos de una célula solar se multiplicara por 1000 para superar la eficiencia de una célula de referencia con una sola banda prohibida. En cambio, una célula con red de difracción precisaría un incremento del número de puntos en un factor 10 a 100, dependiendo del nivel de la absorción parásita en el reflector posterior. Abstract The purpose of this thesis is to investigate the benefits that diffractive light trapping can offer to quantum dot intermediate band solar cells and crystalline silicon solar cells. Both solar cell technologies suffer from incomplete photon absorption in some part of the solar spectrum. Quantum dot intermediate band solar cells are theoretically capable of achieving much higher efficiencies than conventional single-gap devices. Present prototypes suffer from extremely weak absorption of subbandgap photons in the quantum dots. This problem has received little attention so far, yet it is a serious barrier to the technology approaching its theoretical efficiency limit. Crystalline silicon solar cells absorb weakly in the near infrared due to their indirect bandgap. This problem has received much attention over recent decades, and all commercial crystalline silicon solar cells employ some form of light trapping. With the industry moving toward thinner and thinner wafers, light trapping is becoming of greater importance and diffractive structures may offer an improvement over the state-of-the-art. We begin by constructing a computational method with which to simulate solar cells equipped with diffraction grating textures. The method employs a wave-optical treatment of the diffraction grating, via rigorous coupled wave analysis, with a geometric-optical treatment of the thick solar cell bulk. These are combined using a steady-state matrix formalism. The method has been implemented computationally, and is found to be efficient and to give results in good agreement with alternative methods from other authors. The theoretical upper limit to absorption enhancement in solar cells using diffractions gratings is calculated using the matrix formalism derived in the previous task. This limit is compared to the so-called Lambertian limit for light trapping with isotropic scatterers, and to the absolute upper limit to light trapping in bulk absorbers. It is found that bi-periodic gratings (square or hexagonal geometry) are capable of offering much better light trapping than uni-periodic line gratings. The upper limit depends strongly on the grating period. For large periods, diffraction gratings are theoretically able to offer light trapping at the absolute upper limit, but only if the scattering efficiencies have a particular form, which is deemed to be beyond present design capabilities. For periods similar to the incident wavelength, diffraction gratings can offer light trapping below the absolute limit but above the Lambertian limit without placing unrealistic demands on the exact form of the scattering efficiencies. This is possible for a reasonably broad wavelength range. The computational method is used to design and optimise diffraction gratings for light trapping in solar cells. The proposed diffraction grating consists of a hexagonal lattice of cylindrical wells etched into the rear of the bulk solar cell absorber. This is encapsulated in a dielectric buffer layer, and capped with a rear reflector. Simulations are made of this grating profile applied to a crystalline silicon solar cell and to a quantum dot intermediate band solar cell. The grating period, well depth, and lateral well dimensions are optimised numerically for both solar cell types. This yields the optimum parameters to be used in fabrication of grating equipped solar cells. The optimum parameters are explained using simple physical concepts, allowing us to make more general statements that can be applied to other solar cell technologies. Diffraction grating textures are fabricated on crystalline silicon substrates using nano-imprint lithography and reactive ion etching. The optimum grating period from the previous task has been used as a design parameter. The substrates have been processed into solar cell precursors for optical measurements. Reflection spectroscopy measurements confirm that bi-periodic square gratings offer better absorption enhancement than uni-periodic line gratings. The fabricated structures have been simulated with the previously developed computation tool, with good agreement between measurement and simulation results. The simulations reveal that a significant amount of the incident photons are absorbed parasitically in the rear reflector, and that this is exacerbated by the non-planarity of the rear reflector. An alternative method of depositing the dielectric buffer layer was developed, which leaves a planar surface onto which the reflector is deposited. It was found that samples prepared in this way suffered less from parasitic reflector absorption. The next task described in the thesis is the study of photon absorption in semiconductor quantum dots. The bound-state energy levels of in InAs/GaAs quantum dots is calculated using the effective mass approximation. A one- and four- band method is applied to the calculation of electron and hole wavefunctions respectively, with an empirical Hamiltonian being employed in the latter case. The strength of optical transitions between the bound states is calculated using the Fermi golden rule. The effect of the quantum dot dimensions on the energy levels and transition strengths is investigated. It is found that a strong direct transition between the ground intermediate state and the conduction band can be promoted by decreasing the quantum dot width from its value in present prototypes. This has the added benefit of reducing the ladder of excited states between the ground state and the conduction band, which may help to reduce thermal escape of electrons from quantum dots: an undesirable phenomenon from the point of view of the open circuit voltage of an intermediate band solar cell. A realistic detailed balance model is developed for quantum dot solar cells, which uses as input the energy levels and transition strengths calculated in the previous task. The model calculates the transition currents between the many intermediate levels and the valence and conduction bands under a given set of conditions. It is distinct from previous idealised detailed balance models, which are used to calculate limiting efficiencies, since it makes realistic assumptions about photon absorption by each transition. The model is used to reproduce published experimental quantum efficiency results at different temperatures, with quite good agreement. The much-studied phenomenon of thermal escape from quantum dots is found to be photonic; it is due to thermal photons, which induce transitions between the ladder of excited states between the ground intermediate state and the conduction band. In the final chapter, the realistic detailed balance model is combined with the diffraction grating simulation method to predict the effect of incorporating a diffraction grating into a quantum dot intermediate band solar cell. Careful optimisation of the grating period is made to balance the enhancement given to the different intermediate transitions, which occur in series. Due to the extremely weak absorption in the quantum dots, it is found that light trapping alone is not sufficient to achieve high subbandgap currents in quantum dot solar cells. Instead, a combination of light trapping and increased quantum dot density is required. Within the radiative limit, a quantum dot solar cell with no light trapping requires a 1000 fold increase in the number of quantum dots to supersede the efficiency of a single-gap reference cell. A quantum dot solar cell equipped with a diffraction grating requires between a 10 and 100 fold increase in the number of quantum dots, depending on the level of parasitic absorption in the rear reflector.

Cadena de valor de papas nativas (Solanum andigenum sp.) en la provincia de Jauja, Perú

La Asamblea General de la ONU, a solicitud del gobierno peruano, declara en el año 2008 el Año Internacional de la Papa, (AIP). Desde el año 2005, el gobierno peruano ha puesto en marcha estrategias en torno a la importancia de la papa, como la declaración del 30 de Mayo como el Día Nacional de la Papa. El año 2014 es declarado por la FAO, (Food and Agriculture Organization of the United Nations), Año Internacional de la Agricultura Familiar, con un enfoque compartido por esta Tesis Doctoral en el apoyo a la familia campesina peruana. El gobierno peruano utiliza las cadenas de valor como una estrategia de promoción de desarrollo sostenible, que ha permitido contribuir a la inclusión social y económica de productores pobres de zonas alto andinas, como las localizadas en la mancomunidad municipal del Yacus, (MMY), provincia de Jauja, departamento de Junín. Esta estrategia, en la que el mercado incorpora a los pequeños agricultores de las zonas altas de los Andes, (que disponen de recursos económicos muy bajos), en procesos productivos rentables, implica una serie de cambios a realizar, como la transformación de los patrones de producción tradicional hacia aquellos productos o servicios que tienen demanda en el mercado, o la variación de la mentalidad del agricultor pequeño hacia una concepción empresarial de su producción. (Fabián, 2013). Por otra parte, la sostenibilidad de las cadenas de valor depende del eslabón más débil, lo que obliga a conocer la situación de todos los eslabones para poder integrar y reforzar la cadena. Se requiere un sistema de transparencia adecuado que facilite el flujo de la información entre los distintos eslabones. (Briz et al., 2012). Además, el establecimiento de la cadena de valor debe hacerse con cuidado, ya que la eficacia y supervivencia de las empresas están cada vez más ligadas a la cadena de valor a la que pertenece y a la coordinación de la misma. (Briz, 2011). En esta situación, adquiere importancia el estudio de la cadena de valor de la papa nativa, para una vez establecidas sus características, poder determinar la viabilidad o no de una cadena de valor de este producto que repercuta parte de la riqueza generada en los pequeños agricultores alto andinos, e incluso, de su extensión hasta España. Existen estudios sobre las papas nativas, realizadas por diferentes universidades de distintos países, e incluso, de diferentes continentes. Sin embargo, la mayoría de los estudios se centran en la mejora de la producción de la papa nativa. La novedad de la investigación realizada en la presente Tesis Doctoral radica en el estudio de la viabilidad de la comercialización de la papa nativa, mediante el establecimiento de una cadena de valor que se inicie en la provincia de Jauja, Perú, y finalice tanto en los mercados peruanos de las regiones de Junín y Lima, como en España. El objetivo planteado en esta investigación es la mejora de las condiciones económicas y sociales de las comunidades agrícolas de la provincia de Jauja en el Perú, así como fomentar su desarrollo tecnológico e industrial, mediante el fomento de la cadena de valor de la papa nativa y sus derivados. Se establecen como objetivos específicos la caracterización de los eslabones de la cadena de valor de la papa nativa y sus derivados en la provincia de Jauja del Perú y en España, de manera que se determine el valor agregado en los mismos; el fortalecimiento de las organizaciones de productores de papas nativas para la comercialización de sus producciones y para el fomento de la cultura empresarial; y el desarrollo de una cadena de comercialización papas nativas y sus derivados con origen en la Provincia de Jauja, Perú, y que finalice en España, con la venta al consumidor español. Para alcanzar estos objetivos la metodología utilizada es la cadena de valor agroalimentaria, utilizando como herramientas de análisis el análisis DAFO de la cadena de valor de la papa nativa. Las fuentes de información primarias utilizadas proceden en parte del proyecto de cooperación de UPM, “Mejora de la cadena de valor de la patata andina como impulso al desarrollo rural. Caso de tres Comunidades Campesinas en la Provincia de Jauja del Perú”, en el que participó el doctorando, y en parte proceden de la batería de encuestas específicamente diseñadas para los diferentes eslabones de la cadena de valor de la papa nativa. Las fuentes de información secundarias proceden de artículos académicos publicados, de artículos publicados por revistas especializadas del sector y de informes realizados por diferentes instituciones gubernamentales, tanto españolas como peruanas. Las conclusiones de la investigación son las siguientes. La creación de la mancomunidad del Yacus ha beneficiado a los pequeños agricultores. Estos consiguen mejores condiciones de venta y mejores precios para sus productos, lo que repercute en la mejora de sus condiciones de vida. Estas mejoras en las condiciones de venta de los productos se deben a su pertenencia a una cadena de valor de papa nativa que está funcionando de forma eficaz. Las empresas consideradas para constituir la cadena de valor han mostrado interés por formar parte de ella: los campesinos para obtener mejores precios por sus productos y unas mejores condiciones de venta; los distribuidores para asegurarse una calidad determinada de unas variedades fijas de papa nativa; la industria transformadora por disponer de un suministro de producto adecuado al derivado de papa nativa correspondiente, (hojuelas, tunta, etc.); las empresas exportadoras para tener suministro garantizado de los productos que ellos requieren en los volúmenes adecuados. Es una situación ventajosa para todas las empresas participantes. A pesar de trabajar con un producto tradicional, la cadena de valor de la papa nativa presenta innovación en los productos comercializados, tanto en la papa nativa fresca como en sus derivados, en los formatos de los productos, en la red de distribución, en las instituciones peruanas y en el consumidor final. Se percibe una demanda de papa nativa y de sus productos derivados en aquellos países donde existen comunidades de latinoamericanos que han emigrado de sus países de origen. España está entre los países que han acogido a un importante número de personas de origen latinoamericano. A pesar de la fuerte crisis económica sufrida por España, que ha llevado consigo la vuelta a sus países de origen de parte de su comunidad latinoamericana, el tamaño de esta población sigue siendo importante. Esta población demanda productos originarios de sus propios países, y los consumirían de forma frecuente si los precios son adecuados a su capacidad de consumo. El precio de venta de la papa nativa y sus derivados en España es de gran importancia. La importación de estos productos desde Perú hace que este eleve a niveles que le resta competitividad, en especial en la papa fresca. Se aconseja la búsqueda de empresas que puedan adaptar la producción de la papa fresca de forma local, y mantener para los derivados la exportación directa a España. Las preferencias de los consumidores peruanos y españoles en cuanto a formatos y marcas se refieren no son coincidentes. De las encuestas realizadas, se concluye que no puede seguirse la misma estrategia de marketing en ambos países, debiéndose diferenciar los formatos de los paquetes de la papa nativa y de sus derivados en España y en Perú, para así lograr llegar a los consumidores potenciales de ambos países. ABSTRACT At the request of the Peruvian government, the UN General Assembly declared the International Year of the Potato in 2008. Since 2005, the Peruvian government has implemented strategies around the importance of the potato, as the declaration of the 30th of May as the National Day of the Potato. FAO (Food and Agriculture Organization of the United Nations) has declared 2014 as the International Year of Family Farming, with an approach shared by this Ph.D. dissertation about the Peruvian peasant family. The Peruvian government uses value chains as a strategy to promote sustainable development, which has allowed to contribute to the social and economic inclusion of poor farmers in the high Andean regions as those located in the municipal commonwealth of Yacus (MMY) province of Jauja, department of Junín. This strategy, which incorporates small farmers in the high Andean regions, (who have very low income), to the market with profitable production processes, implies a number of changes that should take place, such as changing patterns of traditional production to those products or services that are in demand in the market, or changes in the mentality of the small farmer into a concept of production business. (Fabián, 2013). Moreover, the sustainability of value chains depends on the weakest link, which demands a knowledge of the status of all the links, in order to integrate and strengthen the chain. It is required an adequate transparency to facilitate the flow of information between the various actors. (Briz et al., 2012). Furthermore, the establishment of the value chain should be done carefully, since the effectiveness and the survival of the businesses are increasingly linked to the value chain where the firm is included and to its coordination. (Briz, 2011). In this situation, it becomes important to study the value chain of the native potato, once we establish its features, to be able to determine the feasibility or not of a value chain of this product, which has an impact of the generated wealth in small farms of the high Andean regions, and even the extension of this value chain to Spain. There are studies on native potatoes, made by different universities in several countries and even in more than one continent. However, most studies focus on improving the production of native potato. The originality of the research conducted in this Ph.D. dissertation is the study of the feasibility of commercialization of native potato, by the creation of a value chain that starts in the province of Jauja, Perú, and ends both in Peruvian markets in the region of Lima, and in Spain. The main goal of this research is to improve the economic and social conditions of farming communities in the province of Jauja in Perú, while promoting its technological and industrial development, by the establishment of a value chain of the native potato and derivatives. The specific objectives of the research are the characterization of the links in the value chain of the native potato and its derivatives in the province of Jauja, (Perú) and in Spain, in order to determine the added value; the strengthening of organizations of native potato producers, to commercialize their products and the promotion of enterprise culture; and the development of a chain to market native potato and its derivatives, with its origin in the province of Jauja, (Perú), and its end in Spain, with the sale to the Spanish consumer. In order to achieve these objectives, the used methodology is the agrifood value chain, using as a tool to analysis it the SWOT analysis of the value chain of the native potato. The primary sources of information used in the research come partly from UPM cooperation project, "Improving the value chain of Andean potato as a boost to rural development. Case Three Rural Communities in the Province of Jauja, (Perú)", in which the Ph.D. student was involved, and partly from the surveys, which were specifically designed for the different links of the value chain of the native potato. The secondary sources of information come from academic articles, from articles published by magazines of the industry, and from reports of several government institutions, both Spanish and Peruvian. The conclusions of the research are as follows. The creation of the commonwealth of Yacus has benefited small farmers. They get better sales conditions and better prices for their products, which results in the improvement of their living conditions. These improvements are due to a value chain of native potato which is working effectively. All the firms invited to constitute the value chain have shown interest in being part of it: the farmers to get better prices for their products and better sale conditions; the distributors to ensure a certain quality of fixed varieties of native potato, the processing industry in order to have an adequate supply of product to the corresponding derivative of native potato (chips, “tunta”, etc.); exporting firms to have a guaranteed supply of the products that they require with the right volumes. It's a win-win situation for all participating companies. Despite being a traditional product, the value chain of the native potato presents innovation in marketed products, (both fresh native potato and its derivatives), in the formats of products, in the distribution network, in Peruvian institutions and in relation with the consumer. There is a perceived demand of native potato and its products in countries where communities of Latin Americans have settled down. Spain is among the countries that have received a significant number of people from Latin America. Despite the strong economic crisis suffered by Spain, which has lead to a return to their home countries of part of the Latin American community, the size of this population is still considerable. This population demands products from their own countries, and they frequently consume them if the prices are suitable to their standard of living. The selling price of the native potato and its derivatives in Spain is of great importance. The import of these products from Perú makes the prices rise to levels that reduce competitiveness, especially in fresh native potatoes. It is advised to look for companies which can adapt the fresh potato production in our country, and keep direct export to Spain for the derivatives products. The preferences of Peruvian and Spanish consumers in terms of formats and brands are not the same. The surveys concluded that the same marketing strategy cannot be followed in both countries. Packet formats of native potato and its derivatives should be differentiated in Spain and Perú, in order to reach the potential consumers of both countries.

Las construcciones subterráneas para bodegas, un modelo de ahorro de energía mediante los sistemas constructivos. Estudio de las condiciones higrotérmicas, ventilación y modelos de simulación

Esta tesis se enmarca dentro de una línea de investigación iniciada en el 2004 focalizada en el estudio de soluciones constructivas energéticamente eficientes para la crianza del vino. El objetivo principal es promover el ahorro energético y la sostenibilidad en el diseño de la sala de crianza de las bodegas. Para ello, se profundiza en el estudio de las bodegas subterráneas, ejemplo de eco-construcción, ya que por lo general proporcionan condiciones adecuadas para la crianza sin gasto energético en climatización. En concreto, se abordan aspectos clave para la caracterización y comprensión del funcionamiento de estas construcciones, que en muchas ocasiones condicionan el éxito o el fracaso de las mismas. Así, se analiza el complejo comportamiento de la ventilación natural a lo largo del año, determinando los factores que la condicionan, desvelando el papel que desempeña tanto el túnel de acceso como las chimeneas de ventilación en su funcionamiento. Además, se desarrollan y validan modelos de simulación mediante CFD, que permiten evaluar y predecir con detalle el comportamiento termofluidodinámico de las construcciones subterráneas. Por otra parte, se cuantifica la uniformidad y estabilidad de la sala de crianza a lo largo del año, información que permite fijar recomendaciones y pautas concretas de diseño de los planes de monitorización. Finalmente, se determinan las diferencias de comportamiento higrotérmico existentes entre un amplio abanico de bodegas subterráneas para vino tinto, bodegas representativas de otras soluciones constructivas alternativas de vino tinto, así como bodegas para cavas y vinos generosos, enmarcando el comportamiento de estas bodegas en un contexto global. Además, se desarrollan metodologías adaptadas a las características particulares de estas construcciones, en concreto un sistema de monitorización basado en termografía infrarroja para llevar a cabo inspecciones puntuales para el control ambiental de grandes naves de crianza. Es de esperar que los estudios técnicos y las herramientas desarrolladas ayuden a mejorar el diseño de nuevas bodegas, y a la mejora de las condiciones higrotérmicas de las ya existentes, colaborando a que España siga situada en la vanguardia de la producción de vino de calidad. ABSTRACT This thesis is part of the research started in 2004 and focusing on the study of the energy efficiency in wine aging constructive solutions. The main objective is to promote energy conservation and sustainability in the design of wine aging rooms. To do so, this study focuses on the analysis of the underground cellars, example of eco-construction, since they usually provide adequate conditions for wine aging without using air-conditioning systems. In particular, key aspects for characterizing and understanding these constructions, which often determine the success or failure of them. Thus, the complex behavior of natural ventilation throughout the year is discussed, determining the influencing factors and revealing the role of both the access tunnel and the ventilation chimney. In addition, numerical models are developed and validated using CFD simulation, allowing an in-depth assessment and prediction of the thermofluidynamic behavior in underground constructions. Moreover, uniformity and stability of the aging room throughout the year is quantified, allowing for precise information useful to set recommendations and design guidelines for defining monitoring plans. Finally, hygrothermal behavior differences between a wide range of underground cellars for red wine, red wine wineries with alternative construction solutions and wineries for generous wines and cava wines, In addition, new methodologies adapted towards the particular characteristics of these constructions, a monitoring system based on infrared thermography to perform periodic inspections for environmental controls of the aging rooms, are developed. It is expected that the technical studies and tools developed here will help to improve the design of new wineries, and also the hygrothermal conditions of the existing ones, headed for keeping Spain in the forefront of the countries producing high quality wine.

New systems of management to improve the health and welfare of rabbits in farm conditions = Nuevos sistemas de cría y manejo para mejorar la salud y bienestar de conejos de granja

El objetivo general de esta Tesis Doctoral fue evaluar nuevos sistemas de alojamiento y cría de conejos de granja, estudiando tanto parámetros comportamentales (experimento 1) como productivos y reproductivos (experimento 3). Además, se evaluaron diferentes técnicas de muestreo con el fin de optimizar el tiempo empleado para el estudio del comportamiento animal (experimento 2). En el experimento 1, se estudió el comportamiento de conejas alojadas en dos tipos de jaulas (TJ), convencionales vs. alternativas con una plataforma elevada, en distintos estados fisiológicos (EF), lactantes y gestantes. Se observó el comportamiento de 12 conejas reproductoras con grabaciones de una duración de 24 h continuas. Independientemente del EF y TJ, las conejas pasaron gran parte de su tiempo sobre el reposapatas (57,7 %, de media). Sin embargo, debido al uso de la plataforma (23,0% del tiempo, de media), las conejas lactantes permanecieron un 36,6 % menos de tiempo (P<0,001) sobre el reposapatas y las gestantes un 27,0% menos (P<0,001) sobre el enrejillado en jaulas alternativas que en convencionales. En las jaulas alternativas, las conejas podían adoptar la postura “levantada”, sin embargo ésta fue observada solamente en conejas gestantes una media de 4,6 veces al día. Las conejas bebieron con mas frecuencia en jaulas convencionales que en alternativas (24,6 vs 19,1 veces al día; P<0,05). Se observó una mayor duración y frecuencia del comportamiento “interactuando con compañeras” en conejas gestantes alojadas en jaulas convencionales (276 s/d y 4,6 veces/d; P<0,05). La frecuencia de “interactuando con gazapos” fue menor en jaulas alternativas que en convencionales (2,4 vs 8,6 veces al día; P<0,01). La hora del día afectó al comportamiento de las conejas, teniendo un comportamiento menos activo durante las horas centrales del día. Durante las horas de oscuridad, las conejas estuvieron más inquietas realizando comportamientos como ‘encabritarse’ o amamantar, coincidiendo éstos en el tiempo en el cual las conejas pasaron más tiempo en la plataforma. Las conejas utilizaron frecuentemente la plataforma, independientemente del estado fisiológico. En la fase de lactación, las conejas utilizaron la plataforma para huir de los intentos de mamar por parte de los gazapos cuando éstas no estaban receptivas. El uso de la plataforma puede dar lugar a problemas higiénicos debidos tanto por la acumulación de heces sobre ella como por la caída de heces y orina sobre los animales que están en la parte inferior. La ausencia de estereotipias por parte de las conejas tanto en jaulas alternativas como en convencionales no sugiere una falta de bienestar debida al sistema de alojamiento. En el experimento 2, se compararon distintos métodos de observación simplificada con respecto un método de referencia usando grabaciones continuas de 24 h para la evaluación del comportamiento de conejas en distintos estados fisiológicos (gestantes y lactantes) alojadas en dos tipos de jaulas (convencionales y alternativas). Se analizaron un total de 576 h de grabaciones continuas de 24 h en 12 conejas reproductoras al final del periodo de lactación y en las mismas conejas después del destete. Los comportamientos observados se clasificaron en tres categorías independientes (localización en la jaula, postura y comportamientos funcionales). Se utilizaron grabaciones continuas de 24 h como método de referencia para validar otros cuatro métodos de observación simplificados, utilizando grabaciones de distinta duración y frecuencia a lo largo del día. Métodos regulares: corto y largo con 2.4 y 8 h de observación respectivamente, y métodos irregulares: corto y largo con 6 y 8 h de observación, respectivamente. Como resultado, se observó que independientemente del sistema de alojamiento, el mejor método para reducir el tiempo de observación necesario para evaluar el comportamiento de conejas reproductoras depende del tipo de variable a estudiar y del estado fisiológico de las conejas. En gestantes, los métodos irregulares no fueron adecuados para estimar comportamientos de larga duración tales como tumbada, sentada, descansando y acicalándose. Sin embargo, en ambos estados fisiológicos, los métodos regulares fueron precisos para los comportamientos de los grupos localización y postura y para comportamientos funcionales de larga duración. Por otro lado, los coeficientes de variación de los comportamientos poco frecuentes realizados principalmente durante el periodo de oscuridad fueron muy altos, y el método irregular largo obtuvo los menores errores de estimación para éstos comportamientos. En el experimento 3, se estudió el efecto de un uso combinado de lactaciones largas (hasta 46 días) con jaulas alternativas sobre los parámetros productivos y reproductivos de 104 conejas y sus camadas durante cinco ciclos reproductivos. La mitad de las conejas fueron alojadas en jaulas polivalentes convencionales (39 cm x 100 cm x 30 cm) y la otra mitad en jaulas polivalentes alternativas (39 cm x 100 cm x 60 cm), con una plataforma elevada. Dentro de cada grupo de alojamiento, la mitad de las conejas se destetaron a 32 días y la otra mitad a 46 días tras el parto. Las lactaciones más largas afectaron negativamente al peso (P<0,001), contenido en grasa y energía (P<0,05) de las conejas al final del periodo de lactación, pero éste efecto disminuyó con el número de partos. La fertilidad, prolificidad y la mortalidad de las conejas no fue afectada por la duración de la lactación. El destete tardío dio lugar a un mayor tamaño y peso de la camada al final del periodo de crecimiento (8,9 y 11,3 %, respectivamente) y a un menor índice de conversión por jaula durante el todo el periodo experimental (13,5 %) con respecto al destete convencional (P<0,001). Éstos resultados fueron paralelos a la menor mortalidad global (12,6 vs 17,6 %; P<0,05) observada en gazapos con destete tardío. Las diferencias en los parámetros productivos con las distintas edades al destete sólo fueron observadas en los ciclos con peor estado sanitario (tercer y quinto ciclo), en los cuales el destete tardío redujo la mortalidad. El tipo de jaula no afectó al peso de la coneja, condición corporal, mortalidad, fertilidad ni tamaño de camada durante los cinco primeros ciclos reproductivos. Sin embargo, el peso de la camada y el índice de conversión a los 21 días de edad fueron 4,2% mayor (P<0,001) y 5,0% menor (P<0,005) en animales alojados en jaulas alternativas que en jaulas convencionales. A día 59 las jaulas alternativas dieron lugar a camadas más pesadas (P<0,01); sin embargo, éste efecto fue influenciado por la densidad alcanzada en cada ciclo, ya que cuando la densidad de los animales fue menor que 40kg/m2 (tercer y quinto ciclo), el efecto del tipo de jaula sobre el peso de la camada no fue significativo. De los resultados obtenidos se puede concluir que el uso combinado de lactaciones más largas y jaulas con mayor superficie disponible con una plataforma elevada podría ser una alternativa para mejorar el bienestar animal en determinadas situaciones productivas. ABSTRACT The general aim of this PhD Thesis was to evaluate new housing and husbandry systems of farmed rabbits, studying behavioral (experiment 1), productive and reproductive (experiment 3) parameters. Moreover, different sampling techniques were evaluated in order to optimize the assessment of rabbit behaviour (experiment 2). In experiment 1, the behaviour of rabbit does housed in two different types of cage (TC), conventional vs. alternative with an elevated platform, at different physiological stages (PS), lactation and gestation was to study. Behavioural observations were carried out on 12 commercial rabbit does using continuous 24 hour video recording. Independently of PS and TC, rabbit does spent most of their time on foot mats (57.7 %, as average). However, due to the use of platforms (23.0% of time, as average), lactating does spent 36.6% less time (P<0.001) on foot mats and gestating does spent 27.0% less (P<0.001) time on wire mesh in alternative cages than in conventional cages. Alternative cages allowed for standing posture but this behaviour was only observed in gestating does (4.6 times a day, as average). Frequency of drinking was higher in conventional than in alternative cages (24.6 vs. 19.1 times a day; P<0.05). Gestating does housed in conventional cages reached the highest duration and frequency of interacting with neighbours (276 s/d and 4.6 times/d; P<0.05). The frequency of interacting with kits was lower in alternative than in conventional cages (2.4 vs. 8.6 times a day; P<0.01). Does’ behaviour was influenced by hour of day, being less active at the midday hours. During dark hours rabbit does more frequently performed restless behaviour such as hyperactivity or nursing, matching the time at which rabbit does spent more time on the platform. The platform was frequently used by rabbit does, independent of their physiological state, and during late lactation phase, when mothers were not receptive to nursing, does housed in alternative cages used the platform as a mean to flee from kids trying to suckle. The use of the platform might lead to hygienic problems due to retained faeces on the platform and faeces and urine falling onto animals located in the lower part of the cage. Stereotypies were not observed in any housing system, therefore conventional cages do not suggest lack of animal welfare. In experiment 2, it was compared the results of different simplified sampling methods of behavioural data with respect to reference records of 24-h in order to assess rabbit does behaviours at different physiological stages (gestation and lactation) in animals housed in two types of cages (conventional and alternative). A total of 576 h of continuous video of 12 rabbit does at the end of lactation and on the same females after weaning were analysed. The behavioural observations were studied using three independent categories of classification (location in the cage, posture and functional behaviours). Continuous behavioural recordings of 24 h were considered as the reference method to validate another 4 sampling methods of data collection by aggregated video recordings of different frequency and duration (regular short and long methods with 2.4 and 8 h of observation respectively, and irregular short and long methods with 6 and 8 h of observation, respectively). The current results showed that, independently of housing system, the best method to reduce the total observation time required to assess rabbit does behaviour depends on the trait studied and physiological stage of does. In gestating does, irregular methods were not suitable to estimate behaviours of long duration such as lying, sitting, resting and grooming. However, in both physiological stages, regular methods were accurate for location behaviours, postures and functional behaviours of long duration. Instead, for the study of infrequent behaviours performed mainly during dark period, where coefficients of variation were high, the irregular long method led to the lowest mean estimation errors. In experiment 3, the effects of the combined use of long lactation periods (46 days) with alternative cages on the reproductive and growth performance of 104 rabbit does and their litters during five consecutive reproductive cycles were studied. Half of does were housed in conventional polyvalent cages (39 cm x 100 cm x 30 cm) and the other half in alternative polyvalent cages (39 cm x 100 cm x 60 cm), with a raised platform. Half of the rabbit does in each type of cages were weaned at 32 and the other half at 46 days after parturition. Longer lactations affected negatively to body weight (P<0.001), fat and energy content (P<0.05) of rabbit does at the end of the lactation period, but this effect decreased with the number of parturitions. Fertility, prolificacy and doe mortality were not affected by lactation length. Late weaning led to higher litter size (by 8.9 %) and litter weight (by 11.3 %) at the end of growing period and lower feed conversion ratio per cage during the overall experimental period (13.5 %) than standard weaning (P<0.001). These results were parallels to a lower mortality (12.6 vs 17.6 %; P<0.05) of young rabbit weaned later during the overall experimental period. Differences in performances at different weaning ages were only observed during cycles with worst health status (third and fifth cycles) in which late weaning decreased mortality. Type of cage did not affect doe body weight and body condition, mortality, fertility, prolificacy and litter size during the five firsts reproductive cycles. Nevertheless, at day 21 litter weight and feed conversion ratio were 4.2 % higher (P<0.001) and 5.0 % lower (P<0.005) in animals housed in alternative than in conventional cages. Alternative cages also led to heavier litters at 59 days (P<0.01); however, this effect was influenced by density reached in each cycle, as when the density of animals was lower than 40 kg/m2 (cycles three and five), the difference of litter weight between alternative and conventional cages was not significant. From the results obtained it can be concluded that the combined use of longer lactations and cages with higher available surface with a raised platform could be an alternative to improve animal welfare in some productive situations.

What role does climate change play in agricultural market uncertainty? An integrated assessment taking into account market-driven adjustments

Recent studies point to climate change being one of the long-term drivers of agricultural market uncertainty. To advance in the understanding of the influence of climate change on future agricultural market developments, we compare a reference scenario for 2030 with alternative simulation scenarios that differ regarding: (1) emission scenarios; (2) climate projections; and (3) the consideration of carbon fertilization effects. For each simulation scenario, the CAPRI model provides global and EU-wide impacts of climate change on agricultural markets. Results show that climate change would considerably affect agrifood markets up to 2030. Nevertheless, market-driven adaptation strategies (production intensification, trade adjustments) would soften the impact of yield shocks on supply and demand. As a result, regional changes in production would be lower than foreseen by other studies focused on supply effects.

O CADERNO FOLHETIM E O JORNALISMO CULTURAL DA FOLHA DE S. PAULO (1977 - 1989)

O caderno semanal Folhetim, da Folha de S. Paulo, foi publicado entre 1977 e 1989. Teve três fases distintas, caracterizadas pela semelhança com a imprensa alternativa (no período 1977-1979), pela abertura de espaços à discussão sobre a retomada da democracia, sobre temas sociais e por uma aproximação com as universidades (1979-1982) e pela publicação de ensaios altamente especializados (1982-1989). Procura-se analisar os fatores determinantes dessas reorientações editoriais do Folhetim, como a influência do mercado de jornais, do processo de abertura política e das reformas operadas na Folha a partir de 1974.(AU)

O CADERNO FOLHETIM E O JORNALISMO CULTURAL DA FOLHA DE S. PAULO (1977 - 1989)

O caderno semanal Folhetim, da Folha de S. Paulo, foi publicado entre 1977 e 1989. Teve três fases distintas, caracterizadas pela semelhança com a imprensa alternativa (no período 1977-1979), pela abertura de espaços à discussão sobre a retomada da democracia, sobre temas sociais e por uma aproximação com as universidades (1979-1982) e pela publicação de ensaios altamente especializados (1982-1989). Procura-se analisar os fatores determinantes dessas reorientações editoriais do Folhetim, como a influência do mercado de jornais, do processo de abertura política e das reformas operadas na Folha a partir de 1974.(AU)

Substrate-specific inhibition of RecQ helicase

The RecQ helicases constitute a small but highly conserved helicase family. Proteins in this family are of particular interest because they are critical to maintenance of genomic stability in prokaryotes and eukaryotes. Eukaryotic RecQ helicase family members have been shown to unwind not only DNA duplexes but also DNAs with alternative structures, including structures stabilized by G quartets (G4 DNAs). We report that Escherichia coli RecQ can also unwind G4 DNAs, and that unwinding requires ATP and divalent cation. RecQ helicase is comparably active on duplex and G4 DNA substrates, as measured by direct comparison of protein activity and by competition assays. The porphyrin derivative, N-methyl mesoporphyrin IX (NMM), is a highly specific inhibitor of RecQ unwinding activity on G4 DNA but not duplex DNA: the inhibition constant (Ki) for NMM inhibition of G4 DNA unwinding is 1.7 µM, approximately two orders of magnitude below the Ki for inhibition of duplex DNA unwinding (>100 µM). NMM may therefore prove to be a valuable compound for substrate-specific inhibition of other RecQ family helicases in vitro and in vivo.

Heterogeneity in polyadenylation cleavage sites in mammalian mRNA sequences: implications for SAGE analysis

The analysis of a human thyroid serial analysis of gene expression (SAGE) library shows the presence of an abundant SAGE tag corresponding to the mRNA of thyroglobulin (TG). Additional, less abundant tags are present that can not be linked to any other known gene, but show considerable homology to the wild-type TG tag. To determine whether these tags represent TG mRNA molecules with alternative cleavage, 3′-RACE clones were sequenced. The results show that the three putative TG SAGE tags can be attributed to TG transcripts and reflect the use of alternative polyadenylation cleavage sites downstream of a single polyadenylation signal in vivo. By screening more than 300 000 sequences corresponding to human, mouse and rat transcripts for this phenomenon we show that a considerable percentage of mRNA transcripts (44% human, 22% mouse and 22% rat) show cleavage site heterogeneity. When analyzing SAGE-generated expression data, this phenomenon should be considered, since, according to our calculations, 2.8% of human transcripts show two or more different SAGE tags corresponding to a single gene because of alternative cleavage site selection. Both experimental and in silico data show that the selection of the specific cleavage site for poly(A) addition using a given polyadenylation signal is more variable than was previously thought.

Estudo do impacto visual de alguns sinais horizontais de trânsito: avaliação utilizando métodos da psicofísica

Neste trabalho são feitas comparações entre os principais sinais horizontais de trânsito (Parada Obrigatória, Faixa de Pedestre e Lombada) padronizados pelo Código de Trânsito Brasileiro (CTB), com modelos alternativos que sofreram variações na forma e/ou cor, alguns deles já usados em algumas cidades brasileiras, com o objetivo de identificar se essas alterações melhoram ou não a percepção do sinal (impacto visual). Para isso são utilizados dois métodos da Psicofísica. Numa primeira etapa a análise é feita utilizando o Método de Comparação aos Pares, para um grupo de quatro estímulos para cada sinal estudado. Em seguida, aplicando o Método de Estimativa das Categorias, foi avaliado o impacto visual do sinal horizontal de Parada Obrigatória quanto à presença ou ausência de orla externa. Por fim, também pelo Método de Comparação aos Pares, foi avaliado o impacto visual causado pelo uso conjugado de sinais horizontais em cruzamentos não semaforizados. Foram estudadas as combinações entre os sinais de parada obrigatória, faixa de pedestres e faixa de retenção. Os resultados obtidos permitem inferir as seguintes conclusões: as alterações na forma e cor propostas para os sinais de parada obrigatória e faixa de pedestres causam maior impacto visual quando comparadas ao modelo padronizado pelo CTB mas, no caso das lombadas, a sinalização padrão mostrou-se ser mais perceptível; quanto a presença ou não da orla externa no sinal de parada obrigatória, esta demonstrou ser positiva; o uso conjugado dos sinais de parada obrigatória, faixa de pedestres e faixa de retenção é a combinação que mais desperta a atenção dos usuários.

Remembering Liberal Feminism In Radical Ways: Locating Conservative Strategies In The Narratives Of Dr. Christina Hoff Sommers, Tammy Bruce, And Dr. Laura Schlessinger

This dissertation identifies and challenges post-feminist narratives that remember the second wave or 1960s and 1970s liberal feminism as a radical form of activism. The narratives of three prominent post-feminist authors: Dr. Christina Hoff Sommers, Tammy Bruce and Dr. Laura Schlessinger are used as examples of how identification works as a rhetorical device that motivates individual actors to join in a struggle against liberal and radical feminist ideologies. I argue that each author draws on classically liberal and politically conservative virtues to define a "true" feminism that is at odds with alternative feminist commitments. I demonstrate how these authors create a subject position of a "true feminist" that is reminiscent of the classically liberal suffragist. In Burkean terms, each author constitutes the suffragist as a friend and juxtaposes her with the enemy--modern liberal and radical feminists. I articulate the consequences of such dialectical portrayals of feminist activism and further suggest that these authors' visions of feminism reinforce patriarchal practices, urging women to assimilate into a classically liberal society at the cost of social justice. In opposition to their memories of feminism, I offer a radical democratic approach of remembering feminism that is less concerned with the definition of feminism or feminist than it is with holistically addressing oppression and what oppression means to subjugated populations.

The Impact of Transit Oriented Development on the Travel Behaviors of Workers in Denver, Colorado

To combat unsustainable transportation systems characterized by reliance on petroleum, polluting emissions, traffic congestion and suburban sprawl, planners encourage mixed use, densely populated areas that provide individuals with opportunities to live, work, eat and shop without necessarily having to drive private automobiles to accommodate their needs. Despite these attempts, the frequency and duration of automobile trips has consistently increased in the United States throughout past decades. While many studies have focused on how residential proximity to transit influences travel behavior, the effect of workplace location has largely been ignored. This paper asks, does working near a TOD influence the travel behaviors of workers differently than workers living near a TOD? We examine the non-work travel behaviors of workers based upon their commuting mode and proximity to TODs. The data came from a 2009 travel behavior survey by the Denver Regional Council of Governments, which contains 8,000 households, 16,000 individuals, and nearly 80,000 trips. We measure sustainable travel behaviors as reduced mileage, reduced number of trips, and increased use of non-automobile transportation. The results of this study indicate that closer proximity of both households and workplaces to TODs decrease levels of car commuting and that non-car commuting leads to more sustainable personal travel behaviors characterized by more trips made with alternative modes.

Cross-Disciplinary Collaboration Behavior of Practitioners in the Treatment of Anxiety Disorders

Current research on the collaborative behaviors of conventional and alternative health care providers for the treatment of anxiety is lacking. While there are multiple studies looking at alternative health care integration into primary care, none of them look at anxiety specifically. The purpose of this paper is to provide a preliminary exploration of possible barriers to collaboration between conventional and alternative health care providers for the treatment of anxiety. Quantitative data on collaboration behavior patterns were obtained with an anonymous survey. Data from the surveys were analyzed using a chi-square analysis. Along with these numerical data narrative data from the survey and interviews were collected in order to assess beliefs about the barriers to collaboration from different health care providers. The results indicate that conventional providers collaborate the least with alternative providers and alternative providers collaborate the least with conventional providers. The descriptive results regarding the barriers to collaboration from the study illustrated a common theme, specifically, the lack of education of conventional providers on alternative health care practices on anxiety. This is an exploratory study: therefore it would be beneficial for future researchers to look deeper into the beliefs of health care providers on the barriers to collaboration, possibly identifying the specific barriers to collaboration for each type of healthcare provider.

An evolutionary approach to the delineation of functional areas based on travel-to-work flows

This paper presents a new approach to the delineation of local labor markets based on evolutionary computation. The aim of the exercise is the division of a given territory into functional regions based on travel-to-work flows. Such regions are defined so that a high degree of inter-regional separation and of intra-regional integration in both cases in terms of commuting flows is guaranteed. Additional requirements include the absence of overlap between delineated regions and the exhaustive coverage of the whole territory. The procedure is based on the maximization of a fitness function that measures aggregate intra-region interaction under constraints of inter-region separation and minimum size. In the experimentation stage, two variations of the fitness function are used, and the process is also applied as a final stage for the optimization of the results from one of the most successful existing methods, which are used by the British authorities for the delineation of travel-to-work areas (TTWAs). The empirical exercise is conducted using real data for a sufficiently large territory that is considered to be representative given the density and variety of travel-to-work patterns that it embraces. The paper includes the quantitative comparison with alternative traditional methods, the assessment of the performance of the set of operators which has been specifically designed to handle the regionalization problem and the evaluation of the convergence process. The robustness of the solutions, something crucial in a research and policy-making context, is also discussed in the paper.