A matrix-calculation-based algorithm for numerical change propagation analysis

Engineering changes (ECs) are raised throughout the lifecycle of engineering products. A single change to one component produces knock-on effects on others necessitating additional changes. This change propagation significantly affects the development time and cost and determines the product's success. Predicting and managing such ECs is, thus, essential to companies. Some prediction tools model change propagation by algorithms, whereof a subgroup is numerical. Current numerical change propagation algorithms either do not account for the exclusion of cyclic propagation paths or are based on exhaustive searching methods. This paper presents a new matrix-calculation-based algorithm which can be applied directly to a numerical product model to analyze change propagation and support change prediction. The algorithm applies matrix multiplications on mutations of a given design structure matrix accounting for the exclusion of self-dependences and cyclic propagation paths and delivers the same results as the exhaustive search-based Trail Counting algorithm. Despite its factorial time complexity, the algorithm proves advantageous because of its straightforward matrix-based calculations which avoid exhaustive searching. Thereby, the algorithm can be implemented in established numerical programs such as Microsoft Excel which promise a wider application of the tools within and across companies along with better familiarity, usability, practicality, security, and robustness. © 1988-2012 IEEE.

Factores explicativos de las actitudes hacia el castigo juvenil. Evidencias de un diseño factorial

El rol desempeñado por la opinión pública en el desarrollo de la política criminal actual justifica el incremento de investigaciones destinadas a evaluar las actitudes de los ciudadanos hacia el castigo. No obstante, los avances en este ámbito han sido limitados debido a la utilización de rudimentarios instrumentos de medida. Por ello, el presente trabajo tiene como propósito explorar el efecto que generan en la opinión ciudadana ciertas variables referidas al hecho delictivo y al infractor, precisando su contribución relativa y la interacción existente entre ellas. Para satisfacer este objetivo se recurrió a un diseño factorial de la encuesta, creando una población de 256 casos-escenario fruto de la combinación de cuatro factores: la edad del joven, su historial delictivo, el grado de implicación en el hecho y el tipo de delito cometido. Los mismos fueron distribuidos en grupos de ocho casos ordenados aleatoriamente y fueron suministrados a 32 sujetos. Posteriormente se aplicaron análisis de regresión logística binaria. Los resultados obtenidos revelan que la naturaleza violenta de los hechos, la implicación activa de los jóvenes y el historial delictivo son predictores importantes de las condenas punitivas. Sin embargo la edad, una variable fundamental en la configuración de la justicia juvenil, no resulta significativa. De este modo, el trabajo muestra el potencial explicativo de este conjunto de factores y debate sus implicaciones teóricas y metodológicas para la investigación futura en este terreno.

Rasch Analysis of the Daily Living Tasks Dependent on Vision (DLTV)

PURPOSE. To examine internal consistency, refine the response scale, and obtain a linear scoring system for the visual function instrument, the Daily Living Tasks Dependent on Vision (DLTV). METHODS. Data were available from 186 participants with a clinical diagnosis of AMD who completed the 22-item DLTV (DLTV-22) according to four-point ordinal response scale. An independent group of 386 participants with AMD were administered a reduced version of the DLTV with 11 items (DLTV-11), according to a five-point response scale. Rasch analysis was performed on both datasets and used to generate item statistics for measure order, response odds ratios per item and per person, and infit and outfit mean square statistics. The Rasch output from the DLTV-22 was examined to identify redundant items and for factorial validity and person item measure separation reliabilities. RESULTS. The average rating for the DLTV-22 changed monotonically with the magnitude of the latent person trait. The expected versus observed average measures were extremely close, with step calibrations evenly separated for the four-point ordinal scale. In the case of the DLTV-11, step calibrations were not as evenly separated, suggesting that the five-point scale should be reduced to either a four- or three-point scale. Five items in the DLTV-22 were removed, and all 17 remaining items had good infit and outfit mean squares. PCA with residuals from Rasch analysis identified two domains containing 7 and 10 items each. The domains had high person separation reliabilities (0.86 and 0.77 for domains 1 and 2, respectively) and item measure reliabilities (0.99 and 0.98 for domains 1 and 2, respectively). CONCLUSIONS. With the improved internal consistency, establishment of the accuracy and precision of the rating scale for the DLTV and the establishment of a valid domain structure we believe that it constitutes a useful instrument for assessing visual function in older adults with age-related macular degeneration.

Antioxidants, but not B-group vitamins increase the resistance of low-density lipoprotein to oxidation:a randomized, factorial design, placebo-controlled trial

We have conducted an intervention trial to assess the effects of antioxidants and B-group vitamins on the susceptibility of low-density lipoprotein (LDL) to oxidation. A total of 509 men aged 30-49 from a local workforce were screened for total plasma homocysteine. The 132 selected (homocysteine concentration > or = 8.34 mumol/l) men were randomly assigned, using a factorial design, to one of four groups receiving supplementation with B group vitamins alone (1 mg folic acid, 7.2 mg pyridoxine, 0.02 mg cyanocobalamin), antioxidant vitamins (150 mg ascorbic acid, 67 mg alpha-tocopherol, 9 mg beta-carotene), B vitamins with antioxidant vitamins, or placebo. Intervention was double-blind. A total of 101 men completed the 8-week study. The lag time of LDL isolated ex vivo to oxidation (induced by 2 mumol/l cupric chloride) was increased in the two groups receiving antioxidants whether with (6.88 +/- 1.65 min) or without (8.51 +/- 1.77 min) B-vitamins, compared with placebo (-2.03 +/- 1.50) or B-vitamins alone (-3.34 +/- 1.08) (Mean +/- S.E., P <0.001). Antibodies to malondialdehyde (MDA) modified LDL were also measured, but there were no significant changes in titers of these antibodies in any group of subjects whether receiving antioxidants or not. Contrast analysis showed that there was no interaction between antioxidants and B-group vitamins. This study indicates that while B-group vitamins lower plasma homocysteine they do not have an antioxidant effect. Thus B-group vitamins and antioxidants appear to have separate, independent effects in reducing cardiovascular risk.

Cross-age tutoring in kindergarten and elementary school settings: a systmeatic review and meta-analysis

Background: Qualified teaching staffs are neither available nor affordable to provide large numbers of children with individual attention. One solution to providing individual tuition has been the development of tutoring programs that are delivered by nonprofessional tutors, such as classmates, older children and community volunteers. Objectives: We have conducted a systematic review of cross-age tutoring interventions delivered by non-professional tutors to children between 5 and 11 years old. Only randomized controlled trials with reliable measures of academic outcomes, and continuing for at least 12 weeks, compared to instruction as usual, were included. Results: Searches of electronic databases and previous reviews, and contacts with researchers yielded 11,564 titles; after screening, 15 studies were included in the analysis. Cross-age tutoring showed small significant effects for tutees on the composite measure of reading (g=0.18, 95% CI: 0.08, 0.27, N=8251), decoding skills (g=0.29, 95% CI: 0.13, 0.44, N=7081), and reading comprehension (g=0.11, 95% CI: 0.01, 0.21, N=6945). No significant effects were detected for other reading sub-skills or for mathematics. The quality of evidence is decreased by study limitations and high heterogeneity of effects. Conclusions: The benefits for tutees of non-professional peer and cross-age tutoring can be given a positive but weak recommendation, considering the low quality of evidence and lack of cost information. Subgroup analyses suggested that highly-structured reading programs may be more useful than loosely-structured programs. Large-scale replication trials using factorial design, process evaluations, reliable outcome measures and logic models are needed to better understand under what conditions, and for whom, cross-age non-professional tutoring may be effective.

Cross-age tutoring in kindergarten and elementary school settings: A systematic review and meta-analysis

This systematic review summarizes effects of peer tutoring delivered to children between 5 and 11 years old by non-professional tutors, such as classmates, older children and adult community peer volunteers. Inclusion criteria for the review included tutoring studies with a randomized controlled trial design, reliable measures of academic outcomes, and duration of at least 12 weeks. Searches of electronic databases, previous reviews, and contacts with researchers yielded 11,564 titles. After screening, 15 studies were included in the analysis. Cross-age tutoring showed small significant effects for tutees on the composite measure of reading (g = 0.18, 95% CI: 0.08, 0.27, N = 8251), decoding skills (g = 0.29, 95% CI: 0.13, 0.44, N = 7081), and reading comprehension (g = 0.11, 95% CI: 0.01, 0.21, N = 6945). No significant effects were detected for other reading sub-skills or for mathematics. The benefits to tutees of non-professional cross-age peer tutoring can be given a positive, but weak recommendation. Effect Sizes were modest and in the range −0.02 to 0.29. Questions regarding study limitations, lack of cost information, heterogeneity of effects, and the relatively small number of studies that have used a randomized controlled trial design means that the evidence base is not as strong as it could be. Subgroup analyses of included studies indicated that highly-structured reading programmes were of more benefit than those that were loosely-structured. Large-scale replication trials using factorial designs, reliable outcome measures, process evaluations and logic models are needed to better understand under what conditions, and for whom, cross-age non-professional peer tutoring may be most effective.

Psychometric evaluation of the Student Authorship Questionnaire: a confirmatory factor analysis approach

This research provides new insights into the measurement of students’ authorial identity and its potential for minimising the incidence of unintentional plagiarism by providing evidence about the psychometric properties of the Student Authorship Questionnaire (SAQ). Exploratory and confirmatory factor analyses (EFA and CFA) are employed to investigate the measurement properties of the scales which comprise the SAQ using data collected from accounting students. The results provide limited psychometric support in favour of the factorial structure of the SAQ and raise a number of questions regarding the instrument’s robustness and generalisability across disciplines. An alternative model derived from the EFA outperforms the SAQ model with regard to its psychometric properties. Explanations for these findings are proffered and avenues for future research suggested.

Reliability and factorial validity of Adolescent Time Inventory-Time Attitude (ATI-TA) Scores in Scottish and Northern Irish adolescents

The contemporary literature investigating the construct broadly known as time perspective is replete with methodological and conceptual concerns. These concerns focus on the reliability and factorial validity of measurement tools, and the sample-specific modification of scales. These issues continue to hamper the development of this potentially useful psychological construct. An emerging body of evidence has supported the six-factor structure of scores on the Adolescent Time Inventory-Time Attitudes Scale, as well as their reliability. The present study utilized data from the first wave of a longitudinal study in the United Kingdom to examine the reliability, validity, and cross-cultural invariance of the scale. Results showed that the hypothesized six-factor model provided the best fit for the data; all alpha and omega estimates were >. .70; scores on ATI-TA factors related meaningfully to self-efficacy scores; and the factor structure was invariant across both research sites. Results are discussed in the context of the extant temporal literature.

Molecular genetic analysis of a cattle population to reconstitute the extinct Algarvia breed

Background: Decisions to initiate conservation programmes need to account for extant variability, diversity loss and cultural and economic aspects. Molecular markers were used to investigate if putative Algarvia animals could be identified for use as progenitors in a breeding programme to recover this nearly extinct breed. Methods: 46 individuals phenotypically representative of Algarvia cattle were genotyped for 27 microsatellite loci and compared with 11 Portuguese autochthonous and three imported breeds. Genetic distances and factorial correspondence analyses (FCA) were performed to investigate the relationship among Algarvia and related breeds. Assignment tests were done to identify representative individuals of the breed. Y chromosome and mtDNA analyses were used to further characterize Algarvia animals. Gene- and allelic-based conservation analyses were used to determine breed contributions to overall genetic diversity. Results: Genetic distance and FCA results confirmed the close relationship between Algarvia and southern Portuguese breeds. Assignment tests without breed information classified 17 Algarvia animals in this cluster with a high probability (q > 0.95). With breed information, 30 cows and three bulls were identified (q > 0.95) that could be used to reconstitute the Algarvia breed. Molecular and morphological results were concordant. These animals showed intermediate levels of genetic diversity (MNA = 6.0 ± 1.6, Rt = 5.7 ± 1.4, Ho = 0.63 ± 0.19 and He = 0.69 ± 0.10) relative to other Portuguese breeds. Evidence of inbreeding was also detected (Fis = 0.083, P < 0.001). The four Algarvia bulls had Y-haplotypes H6Y2 and H11Y2, common in Portuguese cattle. The mtDNA composition showed prevalence of T3 matrilines and presence of the African-derived T1a haplogroup. This analysis confirmed the genetic proximity of Algarvia and Garvonesa breeds (Fst = 0.028, P > 0.05). Algarvia cattle provide an intermediate contribution (CB = 6.18, CW = -0.06 and D1 = 0.50) to the overall gene diversity of Portuguese cattle. Algarvia and seven other autochthonous breeds made no contribution to the overall allelic diversity. Conclusions: Molecular analyses complemented previous morphological findings to identify 33 animals that can be considered remnants of the Algarvia breed. Results of genetic diversity and conservation analyses provide objective information to establish a management program to reconstitute the Algarvia breed.

Optimization process of polyester polymer mortars modified with recycled GFRP waste aggregates – application of factorial experiment design-

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remolded, and complex composition of the composite itself, which includes glass fibres, matrix and different types of inorganic fillers. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. There are several methods to recycle GFR thermostable materials: (a) incineration, with partial energy recovery due to the heat generated during organic part combustion; (b) thermal and/or chemical recycling, such as solvolysis, pyrolisis and similar thermal decomposition processes, with glass fibre recovering; and (c) mechanical recycling or size reduction, in which the material is subjected to a milling process in order to obtain a specific grain size that makes the material suitable as reinforcement in new formulations. This last method has important advantages over the previous ones: there is no atmospheric pollution by gas emission, a much simpler equipment is required as compared with ovens necessary for thermal recycling processes, and does not require the use of chemical solvents with subsequent environmental impacts. In this study the effect of incorporation of recycled GFRP waste materials, obtained by means of milling processes, on mechanical behavior of polyester polymer mortars was assessed. For this purpose, different contents of recycled GFRP waste materials, with distinct size gradings, were incorporated into polyester polymer mortars as sand aggregates and filler replacements. The effect of GFRP waste treatment with silane coupling agent was also assessed. Design of experiments and data treatment were accomplish by means of factorial design and analysis of variance ANOVA. The use of factorial experiment design, instead of the one factor at-a-time method is efficient at allowing the evaluation of the effects and possible interactions of the different material factors involved. Experimental results were promising toward the recyclability of GFRP waste materials as polymer mortar aggregates, without significant loss of mechanical properties with regard to non-modified polymer mortars.

Optimization of HS-SPME analytical conditions using factorial design for trihalomethanes determination in swimming pool water samples

Trihalomethanes (THMs) are widely referred and studied as disinfection by-products (DBPs). The THMs that are most commonly detected are chloroform (TCM), bromodichloromethane (BDCM), chlorodibromomethane (CDBM), and bromoform (TBM). Several studies regarding the determination of THMs in swimming pool water and air samples have been published. This paper reviews the most recent work in this field, with a special focus on water and air sampling, sample preparation and analytical determination methods. An experimental study has been developed in order to optimize the headspace solid-phasemicroextraction (HS-SPME) conditions of TCM, BDCM, CDBM and TBM from water samples using a 23 factorial design. An extraction temperature of 45 °C, for 25min, and a desorption time of 5 min were found to be the best conditions. Analysis was performed by gas chromatography with an electron capture detector (GC-ECD). The method was successfully applied to a set of 27 swimming pool water samples collected in the Oporto area (Portugal). TCM was the only THM detected with levels between 4.5 and 406.5 μg L−1. Four of the samples exceeded the guideline value for total THMs in swimming pool water (100 μgL−1) indicated by the Portuguese Health Authority.

Some concepts and models usefulninthe analysis of discrete life time data

This thesis entitled Reliability Modelling and Analysis in Discrete time Some Concepts and Models Useful in the Analysis of discrete life time data.The present study consists of five chapters. In Chapter II we take up the derivation of some general results useful in reliability modelling that involves two component mixtures. Expression for the failure rate, mean residual life and second moment of residual life of the mixture distributions in terms of the corresponding quantities in the component distributions are investigated. Some applications of these results are also pointed out. The role of the geometric,Waring and negative hypergeometric distributions as models of life lengths in the discrete time domain has been discussed already. While describing various reliability characteristics, it was found that they can be often considered as a class. The applicability of these models in single populations naturally extends to the case of populations composed of sub-populations making mixtures of these distributions worth investigating. Accordingly the general properties, various reliability characteristics and characterizations of these models are discussed in chapter III. Inference of parameters in mixture distribution is usually a difficult problem because the mass function of the mixture is a linear function of the component masses that makes manipulation of the likelihood equations, leastsquare function etc and the resulting computations.very difficult. We show that one of our characterizations help in inferring the parameters of the geometric mixture without involving computational hazards. As mentioned in the review of results in the previous sections, partial moments were not studied extensively in literature especially in the case of discrete distributions. Chapters IV and V deal with descending and ascending partial factorial moments. Apart from studying their properties, we prove characterizations of distributions by functional forms of partial moments and establish recurrence relations between successive moments for some well known families. It is further demonstrated that partial moments are equally efficient and convenient compared to many of the conventional tools to resolve practical problems in reliability modelling and analysis. The study concludes by indicating some new problems that surfaced during the course of the present investigation which could be the subject for a future work in this area.

Multi-site time-trend analysis of soil fertility management effects on crop production in sub-Saharan West Africa

Soil fertility constraints to crop production have been recognized widely as a major obstacle to food security and agro-ecosystem sustainability in sub-Saharan West Africa. As such, they have led to a multitude of research projects and policy debates on how best they should be overcome. Conclusions, based on long-term multi-site experiments, are lacking with respect to a regional assessment of phosphorus and nitrogen fertilizer effects, surface mulched crop residues, and legume rotations on total dry matter of cereals in this region. A mixed model time-trend analysis was used to investigate the effects of four nitrogen and phosphorus rates, annually applied crop residue dry matter at 500 and 2000 kg ha^-1, and cereal-legume rotation versus continuous cereal cropping on the total dry matter of cereals and legumes. The multi-factorial experiment was conducted over four years at eight locations, with annual rainfall ranging from 510 to 1300 mm, in Niger, Burkina Faso, and Togo. With the exception of phosphorus, treatment effects on legume growth were marginal. At most locations, except for typical Sudanian sites with very low base saturation and high rainfall, phosphorus effects on cereal total dry matter were much lower with rock phosphate than with soluble phosphorus, unless the rock phosphate was combined with an annual seed-placement of 4 kg ha^-1 phosphorus. Across all other treatments, nitrogen effects were negligible at 500 mm annual rainfall but at 900 mm, the highest nitrogen rate led to total dry matter increases of up to 77% and, at 1300 mm, to 183%. Mulch-induced increases in cereal total dry matter were larger with lower base saturation, reaching 45% on typical acid sandy Sahelian soils. Legume rotation effects tended to increase over time but were strongly species-dependent.

Robust Factor Analysis for Compositional Data

Factor analysis as frequent technique for multivariate data inspection is widely used also for compositional data analysis. The usual way is to use a centered logratio (clr) transformation to obtain the random vector y of dimension D. The factor model is then y = Λf + e (1) with the factors f of dimension k < D, the error term e, and the loadings matrix Λ. Using the usual model assumptions (see, e.g., Basilevsky, 1994), the factor analysis model (1) can be written as Cov(y) = ΛΛT + ψ (2) where ψ = Cov(e) has a diagonal form. The diagonal elements of ψ as well as the loadings matrix Λ are estimated from an estimation of Cov(y). Given observed clr transformed data Y as realizations of the random vector y. Outliers or deviations from the idealized model assumptions of factor analysis can severely effect the parameter estimation. As a way out, robust estimation of the covariance matrix of Y will lead to robust estimates of Λ and ψ in (2), see Pison et al. (2003). Well known robust covariance estimators with good statistical properties, like the MCD or the S-estimators (see, e.g. Maronna et al., 2006), rely on a full-rank data matrix Y which is not the case for clr transformed data (see, e.g., Aitchison, 1986). The isometric logratio (ilr) transformation (Egozcue et al., 2003) solves this singularity problem. The data matrix Y is transformed to a matrix Z by using an orthonormal basis of lower dimension. Using the ilr transformed data, a robust covariance matrix C(Z) can be estimated. The result can be back-transformed to the clr space by C(Y ) = V C(Z)V T where the matrix V with orthonormal columns comes from the relation between the clr and the ilr transformation. Now the parameters in the model (2) can be estimated (Basilevsky, 1994) and the results have a direct interpretation since the links to the original variables are still preserved. The above procedure will be applied to data from geochemistry. Our special interest is on comparing the results with those of Reimann et al. (2002) for the Kola project data

Preliminary factorial structure of the O’Kelly Women’s Belief Scales in Mexican population

A Back-translated Mexican version of the Austra- lian o’Kelly Women’s Belief scales was given to a sample of 363 women born and living in Mexico. A factor analysis with a varimax rotation with cu- toff eigenvalues of 3 showed that 36 out of the 92 items originally developed in the Australian study accounted for 40.138% of the variance, and could be ultimately grouped into two factors: one “ra- tionality” factor, with a total of 14 items, and one “Irrationality” factor with a total of 22 items, and with a very low Pearson’s rs (.119) between them. these results support the equivalency of the Mexi- can version to the original instrument used to iden- tify the presence of the reBt’s absolutistic, rigid beliefs about traditional feminine roles in women.