Tectono-metamorphic evolution of a nappe stack: A case study of the Swiss Alps

Fold-and-thrust belts are prominent structures that occur at the front of compressional orogens. To unravel the tectonic and metamorphic evolution of such complexes, kinematic investigations, quantitative microstructural analysis and geothermometry (calcite–graphite, calcite–dolomite) were performed on carbonate mylonites from thrust faults of the Helvetic nappe stack in Central Switzerland. Paleo-isotherms of peak temperature conditions and cooling stages (fission track) of the nappe pile were reconstructed in a vertical section and linked with the microstructural and kinematic evolution. Mylonitic microstructures suggest that under metamorphic conditions close to peak temperature, strain was highly localized within thrust faults where deformation temperatures spatially continuously increased in both directions, from N to S within each nappe and from top–down in the nappe stack, covering a temperature range of 180–380 °C. Due to the higher metamorphic conditions, thrusting of the lowermost nappe, the Doldenhorn nappe, was accompanied by a much more pronounced nappe internal ductile deformation of carbonaceous rock types than was the case for the overlying Wildhorn- and Gellihorn nappes. Ongoing thrusting brought the Doldenhorn nappe closer to the surface. The associated cooling resulted in a freezing in of the paleo-isotherms of peak metamorphic conditions. Contemporaneous shearing localized in the basal thrust, initially still in the ductile deformation regime and finally as brittle faulting and cataclasis inducing ultimately an inverse metamorphic zonation. With ongoing exhumation and the formation of the Helvetic antiformal nappe stack, a bending of large-scale tectonic structures (thrusts, folds), peak temperature isotherms and cooling isotherms occurred. While this local bending can directly be attributed to active deformation underneath the section investigated up to times of 2–3 ma, a more homogeneous uplift of the entire region is suggested for the very late and still active exhumation stage.

Development of new analytical procedures of isotope geochemistry by mass spectrometry. Application to the study of high-pressure metamorphic rocks from the Iberian Massif

319 p.

Tectonics of Central and Eastern California, Late Cretaceous to Modern

The Late Cretaceous to Modern tectonic evolution of central and eastern California has been studied for many decades, with published work generally focusing on specific geographic areas and time periods. The resulting literature leaves the reader, whether graduate student, faculty member, or layperson, wondering what a coherently integrated tectonic evolution might look like, or if it would be at all possible to undertake such a task. This question is the common thread weaving together the four studies presented in this work. Each of the individual chapters is targeted at a specific location and time period which I have identified as a critical yet missing link in piecing together a coherent regional tectonic story. In the first chapter, we re-discover a set of major west down normal faults running along the western slope of the southern Sierra, the western Sierra fault system (WSFS). We show that one of these faults was offset by roughly a kilometer in Eocene time, and that this activity directly resulted in the incision of much of the relief present in modern Kings Canyon. The second chapter is a basement landscape and thermochronometric study of the hanging wall of the WSFS. New data from this study area provide a significant westward expansion of basement thermochronometric data from the southern Sierra Nevada batholith. Thermal modeling results of these data provide critical new constraints on the early exhumation of the Sierra Nevada batholith, and in the context of the results from Chapter I, allow us to piece together a coherent chronology of tectonic forcings and landscape evolution for the southern Sierra Nevada. In the third chapter, I present a study of the surface rupture of the 1999 Hector Mine earthquake, a dextral strike slip event on a fault in the Eastern California Shear Zone (ECSZ). New constraints on the active tectonics in ECSZ will help future studies better resolve the enigmatic mismatch between geologic slip rates and geodetically determined regional rates. Chapter IV is a magnetostratigraphic pilot study of the Paleocene Goler Formation. This study provides strong evidence that continued investigation will yield new constraints on the depositional age of the only fossil-bearing Paleocene terrestrial deposit on the west coast of North America. Each of these studies aims to provide important new data at critical missing links in the tectonic evolution of central and eastern California.

Extensional orogenic collapse captured by strike-slip tectonics:

The late Paleozoic collision between Gondwana and Laurussia resulted in the polyphase deformation and magmatism that characterizes the Iberian Massif of the Variscan orogen. In the Central Iberian Zone, initial con- tinental thickening (D1; folding and thrusting) was followed by extensional orogenic collapse (D2) responsible for the exhumation of high-grade rocks coeval to the emplacement of granitoids. This study presents a tectonometamorphic analysis of the Trancoso-Pinhel region (Central Iberian Zone) to ex- plain the processes in place during the transition froman extension-dominated state (D2) to a compression-dom- inated one (D3).Wereveal the existence of low-dipping D2 extensional structures later affected by several pulses of subhorizontal shortening, each of them typified by upright folds and strike-slip shearing (D3, D4 and D5, as identified by superimposition of structures). The D2 Pinhel extensional shear zone separates a low-grade domain from an underlying high-grade domain, and it contributed to the thermal reequilibration of the orogen by facil- itating heat advection from lower parts of the crust, crustal thinning, decompression melting, and magma intru- sion. Progressive lessening of the gravitational disequilibrium carried out by this D2 shear zone led to a switch from subhorizontal extension to compression and the eventual cessation and capture of the Pinhel shear zone by strike-slip tectonics during renewed crustal shortening. High-grade domains of the Pinhel shear zone were folded together with low-grade domains to define the current upright folded structure of the Trancoso-Pinhel re- gion, the D3 Tamames-Marofa-Sátão synform. Newdating of syn-orogenic granitoids (SHRIMP U\\Pb zircon dat- ing) intruding the Pinhel shear zone, together with the already published ages of early extensional fabrics constrain the functioning of this shear zone to ca. 331–311 Ma, with maximum tectonomagmatic activity at ca. 321–317 Ma. The capture and apparent cessation of movement of the Pinhel shear zone occurred at ca. 317– 311 Ma.

Subsidence history, thermal maturity, and structural inversion of the Greater Caucasus-Kura-Adjara-Trialeti basin system of central-eastern Georgia

This study aims at defining the tectonic evolution of a portion of the Caucasian region, in Georgia, which experienced a complex pattern of deformation events throughout Mesozoic and Cenozoic times. An integrated approach was applied to unravel the thermo-tectonic history of three inverted sedimentary basins from burial to exhumation. Additionally, this dissertation provides examples of structural inversion of sedimentary basins in response to far-field transmission of compressional stresses away from collision zones, contributing to elucidate the dynamics of stress partitioning during continental collisions. The Adjara-Trialeti fold-and-thrust belt in south-western Georgia results from the structural inversion of a Middle Eocene continental back-arc rift basin opened as a consequence of the Northern Neotethys slab rollback. This study quantitatively defines the subsidence and exhumation history of the Adjara-Trialeti basin, constraining its Middle Miocene inception of structural inversion. The western Kura Basin is a flexural foreland basin trapped between the Lesser Caucasus to the south and the Greater Caucasus to the north. This study constrains successive and competing episodes of flexural subsidence during Oligocene-Miocene times, followed by partial inversion through thick- and thin-skinned tectonics in response to continued convergence between the adjacent, oppositely verging orogenic belts. The Greater Caucasus results from the structural inversion of a Jurassic continental back-arc basin, but the timing of its growth is still debated. An across-strike transect in its southern central domain was studied, indicating that this sector of the Greater Caucasus experienced two phases of structural inversion during Late Cretaceous-Paleocene and Late Miocene times. Overall, the dataset presented in this dissertation points to a complex and episodic history of incremental deformation, characterised by successive phases of extensional and compressional tectonics which developed in response to sequential terrane accretion at the southwestern margin of Eurasia since Late Cretaceous times, eventually determining the current configuration of the Arabia-Eurasia collision zone.

Tectonics of the wedge-top Epiligurian basins and implications for the syn-to-post orogenic evolution of the Northern Apennines fold-and-thrust belt (Italy)

This thesis has the aim to give an overview about the tectonic history of the Epiligurian units, which crop out in the axial portion of the Northern Apennines fold-and-thrust belt, from a structural and thermal point of view, through a multiscalar and multitecnique approach. I focused on a key example of Epiligurian wedge-top basin, (Marzabotto Basin) proceeding from macro-to-microscale approach. The study started from a remote sensing analysis of the lineaments and morphostructures which affected the study area to obtain the regional faulting pattern and an overview about the main tectonic structures, used as basis for the structural investigation at the mesoscale. On the basis of this, it was possible to reconstruct the succession of tectonic events that affected the Marzabotto Basin, consisting in: i) two sets of thrusts indicating a NE-SW and NW-SE shortening of the sedimentary succession; ii) NE-SW-left lateral transtensional faults related to a strike-slip tectonic phase; iii) three main sets of extensional structures which cut and displace the previous thrusts. Normal faults are related to the post-orogenic evolution and have been dated with U-Th method, getting an age of Middle-Late Pleistocene. From a thermal point of view, apatite fission-tracks and (U-Th)/He analyses of detrital minerals and thermal modelling on the middle-upper Eocene siliciclastic deposits allowed me to better constrain the local exhumation history and correlate it with the large-scale tectonic evolution of the Northern Apennines. In particular, the Marzabotto Basin experienced a complex burial-exhumation history, consisting in two cooling cooling phases related to the growth of the Northern Apennines belt (Oligo-Miocene in age) and a later cooling which tracks the accretion in the orogenic wedge concomitant with rollback-driven extension (late Miocene-Pliocene in age). In conclusion it is possible to affirm that the study shed new light on poorly constrained elements of fold-and-thrust belt.