Effects of Passiflora edulis on the Metabolic Profile of Diabetic Wistar Rat Offspring

Dry extract of the genus Passiflora has been shown to help control glycemia and lipid levels. The objective of this study was to evaluate the effects of passion fruit (P. edulis) on the biochemical profile of offspring from diabetic rats. Diabetes was induced by streptozotocin. The diabetes group consisted of 10 rats with glucose levels greater than 200 mg/dL; the nondiabetic (control) group consisted of 10 rats with glucose levels less than 120 mg/dL. After the diagnosis of diabetes, the mating phase was started. By day 21 of pregnancy, the offspring were born; the dams were kept in individual cages with their offspring until the weaning period. The offspring were then divided into 4 groups (n = 15 each): G1 were offspring from control dams, G2 were offspring from treated nondiabetic dams, G3 were offspring from diabetic dams, and G4 were offspring from treated diabetic dams. For 30 consecutive days, G1 and G3 offspring were treated with vehicle (oral gavage) and G2 and G4 offspring were treated with passion fruit juice (oral gavage). After 30-day treatment, the animals were anesthetized and killed, and blood was drawn immediately for analysis of the biochemical profile (total cholesterol, high-density lipoprotein cholesterol, low-density lipoprotein cholesterol, triglycerides, and glucose). The G2 and G4 rats showed significantly reduced total cholesterol, triglyceride, and low-density lipoprotein cholesterol levels and an increased high-density lipoprotein cholesterol level. The use of passion fruit juice improved lipid profiles, suggesting that this plant may have beneficial effects in the prevention and treatment of dyslipidemias and hyperglycemia.

Determination of density of states in PPS from space-charge-limited current measurements

Space-charge-limited currents measurements have been carried out on undoped amorphous poly p-phenylene sulfide. The scaling law is checked for different samples with varying thickness, and J-V data analyzed. The position of the quasi-Fermi level and the density of states was obtained.

The use of pulsed electric acoustic technique for measuring electric field profiles in ferroelectric ceramic

The pulsed electric acoustic technique, PEA, have been usually applied to probe space charge profiles in polymers. In this work we show preliminary results obtained with lead zirconate-titanate and niobium, PZTN, ferroelectric ceramic samples. Experiments showed that induced charge densities on sample electrodes are mainly due to the ferroelectric polarization of the sample. We present results of the typical PEA response and the procedure to deconvolute the signal in order to obtain the charge densities and the electric field profiles. The PEA setup allows us to show a non-uniform polarization during ferroelectric switching.

Development of a new TDR probe for determining soil water content and dry density

A few traditional methods for determining water content in the field are either inaccurate or time consuming. As an alternative, the time domain reflectometry (TDR) technology has been used in the determination of the soil water content for geotechnical applications. This paper presents the preliminary results on the development of a new TDR probe for determining soil water content and dry density at different depths. This new probe is intended to be pushed into the ground using piezocone equipment. Different from the standard TDR probes with straight rods, the new probe consists of two parallel copper stripes coiled around a PVC-steel core. The probe diameter is the same as the standard 10 cm2 piezocone diameter. Through laboratory calibrations, it is possible to establish expressions relating the soil apparent dielectric constant and the bulk electrical conductivity with the gravimetric water content and the dry density. Copyright ASCE 2007.

The interaction of D mesons and nucleons at finite density

We present results on the the influence of changes in the masses and sizes of D mesons and nucleons on elastic DN scattering cross sections and phase shifts in a hadronic medium composed of confined quarks in nucleons. We evaluate the changes of the hadronic masses due to changes of the light constituent quarks at finite baryon density using a chiral quark model based on Coulomb gauge QCD. The model contains a confining Coulomb potential and a transverse hyperfine interaction consistent with a finite gluon propagator in the infrared. We present results for the total cross section and the s-wave phase shift at low energies for isospin I=1-for I=0 and other partial waves the results are similar.

Plasma lipid profile of experimentally induced hyperlipidemic New Zealand white rabbits is not affected by resveratrol

Hyperlipidemia is well recognized as an important risk factor in the development of atherosclerosis. Low-density lipoproteins (LDL) are components of cholesterol that are highly associated to an increased risk of cardiovascular diseases. Hypercholesterolemia induces proteolytic and oxidative changes in vasculature, leading to a local inflammatory response. Since dietary antioxidants have attracted considerable attention as preventive and therapeutic agents, the polyphenolic compound resveratrol seems to play an important role in prevention of human atherosclerosis. Researches show that resveratrol inhibits LDL oxidation and platelet aggregation, as well as vascular prolifer ation of smooth muscle cells. However, recent findings in animal models reveal conflicting results regarding its effects on plasma lipid levels. The aim of the present study was to evaluate the effect of resveratrol on plasma biochemistry profile in New Zealand white rabbits submitted to a hypercholesterolemic diet. Twenty healthy, male, adult New Zealand white rabbits were fed with ordinary diet for one week before being divided into four treatment groups, containing five animals each. Group CT received maintenance diet; group R received maintenance diet and resveratrol (3mg/kg/day) given orally; group CL received maintenance diet enriched with 1.5% cholesterol; and group CR received maintenance diet enriched with 1.5% cholesterol and resveratrol (3mg/kg/day) given orally. During the experiment, from each animal, samples of 3mL venous blood were collected in heparin twice monthly for measurements of total cholesterol, triglycerides, and low- and high-density lipoproteins. The data analysis revealed that resveratrol did not have a hypolipidemic effect in experimentally induced hypercholesterolemic New Zealand white rabbits.

Spatial electric load forecasting using a local movement approach

An agent based model for spatial electric load forecasting using a local movement approach for the spatiotemporal allocation of the new loads in the service zone is presented. The density of electrical load for each of the major consumer classes in each sub-zone is used as the current state of the agents. The spatial growth is simulated with a walking agent who starts his path in one of the activity centers of the city and goes to the limits of the city following a radial path depending on the different load levels. A series of update rules are established to simulate the S growth behavior and the complementarity between classes. The results are presented in future load density maps. The tests in a real system from a mid-size city show a high rate of success when compared with other techniques. The most important features of this methodology are the need for few data and the simplicity of the algorithm, allowing for future scalability. © 2009 IEEE.

To estimate the electric field near electric energy transmission systems by use simple software

The main objective this article is describe a methodology for the calculation of the profile of the electric field in the level soil and proximities originated by electric energy transmission systems real and in operation in the country. It also is commented the equation used and your computational implementation in order to agile and to optimize the studies. The results of simulations were just presented for the transmission system in the voltage class 500 kV for simplify the understanding and space restriction in the article, very although five others types of configurations have also been used in the complete study with very voltages and respective classes. The results were animating and very nearby of values well-known of electric field of other and publications traditional in the area. The graphic exits of program for better visual comprehension and understanding went in accomplished in the plan and in the space © 2010 IEEE.

Harmonic propagation analysis in electric energy distribution systems

An important alteration of the equivalent loads profile has been observed in the electrical energy distribution systems, for the last years. Such fact is due to the significant increment of the electronic processors of electric energy that, in general, behave as nonlinear loads, generating harmonic distortions in the currents and voltages along the electric network. The effects of these nonlinear loads, even if they are concentrated in specific sections of the network, are present along the branch circuits, affecting the behavior of the entire electric network. For the evaluation of this phenomenon it is necessary the analysis of the harmonic currents flow and the understanding of the causes and effects of the consequent voltage harmonic distortions. The usual tools for calculation the harmonic flow consider one-line equivalent networks, balanced and symmetrical systems. Therefore, they are not tools appropriate for analysis of the operation and the influence/interaction of mitigation elements. In this context, this work proposes the development of a computational tool for the analysis of the three-phase harmonic propagation using Norton modified models and considering the real nature of unbalanced electric systems operation. © 2011 IEEE.

Antifungal Efficacy during Candida krusei Infection in Non-Conventional Models Correlates with the Yeast In Vitro Susceptibility Profile

The incidence of opportunistic fungal infections has increased in recent decades due to the growing proportion of immunocompromised patients in our society. Candida krusei has been described as a causative agent of disseminated fungal infections in susceptible patients. Although its prevalence remains low among yeast infections (2-5%), its intrinsic resistance to fluconazole makes this yeast important from epidemiologic aspects. Non mammalian organisms are feasible models to study fungal virulence and drug efficacy. In this work we have used the lepidopteran Galleria mellonella and the nematode Caenorhabditis elegans as models to assess antifungal efficacy during infection by C. krusei. This yeast killed G. mellonella at 25, 30 and 37°C and reduced haemocytic density. Infected larvae melanized in a dose-dependent manner. Fluconazole did not protect against C. krusei infection, in contrast to amphotericin B, voriconazole or caspofungin. However, the doses of these antifungals required to obtain larvae protection were always higher during C. krusei infection than during C. albicans infection. Similar results were found in the model host C. elegans. Our work demonstrates that non mammalian models are useful tools to investigate in vivo antifungal efficacy and virulence of C. krusei. © 2013 Scorzoni et al.

Strain- and electric field-induced band gap modulation in nitride nanomembranes

The hexagonal nanomembranes of the group III-nitrides are a subject of interest due to their novel technological applications. In this paper, we investigate the strain- and electric field-induced modulation of their band gaps in the framework of density functional theory. For AlN, the field-dependent modulation of the bandgap is found to be significant whereas the strain-induced semiconductor-metal transition is predicted for GaN. A relatively flat conduction band in AlN and GaN nanomembranes leads to an enhancement of their electronic mobility compared to that of their bulk counterparts. © 2013 IOP Publishing Ltd.

Metabolic profile and genotoxicity in obese rats exposed to cigarette smoke

Objective Experimental studies have shown that exposure to cigarette smoke has negative effects on lipid metabolism and oxidative stress status. Cigarette smoke exposure in nonpregnant and pregnant rats causes significant genotoxicity (DNA damage). However, no previous studies have directly evaluated the effects of obesity or the association between obesity and cigarette smoke exposure on genotoxicity. Therefore, the aim of the present investigation was to evaluate DNA damage levels, oxidative stress status and lipid profiles in obese Wistar rats exposed to cigarette smoke. Design and Methods Female rats subcutaneously (sc) received a monosodium glutamate solution or vehicle (control) during the neonatal period to induce obesity. The rats were randomly distributed into three experimental groups: control, obese exposed to filtered air, and obese exposed to tobacco cigarette smoke. After a 2-month exposure period, the rats were anesthetized and killed to obtain blood samples for genotoxicity, lipid profile, and oxidative stress status analyses. Results The obese rats exposed to tobacco cigarette smoke presented higher DNA damage, triglycerides, total cholesterol, free fatty acids, VLDL-c, HDL-c, and LDL-c levels compared to control and obese rats exposed to filtered air. Both obese groups showed reduced SOD activity. These results showed that cigarette smoke enhanced the effects of obesity. Conclusion In conclusion, the association between obesity and cigarette smoke exposure exacerbated the genotoxicity, negatively impacted the biochemical profile and antioxidant defenses and caused early glucose intolerance. Thus, the changes caused by cigarette smoke exposure can trigger the earlier onset of metabolic disorders associated with obesity, such as diabetes and metabolic syndrome. Copyright © 2012 The Obesity Society.

Perfis de polietileno reciclado carregado com fibra de açaí

Foram obtidos perfis tubulares porosos de polietileno (PE) e de polietileno/fibra de açaí (PE/PA) 80/20 extrudados a partir de partículas granuladas de polietileno de alta densidade reciclado de embalagens pós-consumo de 600 μm, e deste com fibra de açaí de 300 μm. Para o processamento das peças foi desenvolvida uma extrusora mono-rosca de bancada, com sistema mecânico acionado por um motor elétrico de ½ CV (0,37 kw) controlado por um inversor de freqüência, com canhões, roscas, matriz e sistema de aquecimento substituíveis. Para permitir uma visualização didática de condições de operação do equipamento de modo simplificado foram realizados testes com parafina em canhão de vidro variando-se a velocidade de rotação do parafuso e perfil de temperatura, ajustando vazão mássica e pressão na saída. Para a extrusão dos perfis porosos foram realizados ensaios reológicos de PE e PE/FA sendo selecionado rosca, barril e matriz de alumínio; rosca com passo de 9 mm e relação comprimento diâmetro (L/D) 22, composta de um elemento misturador e um elemento de flutuação na zona de controle de vazão; ângulo entre o filete e o eixo da rosca 17º, folga entre a rosca e o barril 0,15 mm; rotação de 1,3 rpm; aquecimento ao longo do canhão de 120ºC; matriz tubular com 21 mm de diâmetro interno e mandril de 19 mm de diâmetro externo. Os perfis PE e PE/FA apresentaram poros com diâmetros médios de 0,7 e 0,6 mm; densidade relativa à água a 28ºC de 0,77 e 0,73; módulo de elasticidade de 1,002 e 2,601 GPa e máximo inchamento aparente do extrudado de 100 e 80%.

Influência de estruturas geológicas bidimensionais no campo geoeletromagnético na presença do eletrojato equatorial

A Terra atua como um grande magneto esférico, cujo campo assemelha-se àquele gerado por um dipolo magnético. Este campo apresenta mudanças de intensidade que variam com a localização e a hora local. A parte principal do campo geomagnético se origina no interior da Terra através de processos eletromagnéticos. Extensivos estudos mostraram ainda que existem contribuições de origem externa ao planeta, principalmente de origem solar. Dentre estas fontes há anomalias do campo magnético que surgem a partir de um aumento diurno da corrente elétrica em uma estreita faixa da ionosfera, de direção leste-oeste, centrada no equador magnético e denominada Eletrojato Equatorial (EEJ). Ocasionalmente estas correntes podem apresentar reversões de fluxo, sendo denominadas Contra-Eletrojato (CEJ). Vários autores têm estudado os efeitos do EEJ e CEJ sobre as observações geoeletromagnéticas. Eles estão interessados no efeito combinado do EEJ e estruturas geológicas condutivas 1-D e 2-D. Nestes trabalhos a estrutura 2-D sempre se apresentava paralela ao eletrojato, o que é uma hipótese bastante restritiva ao se modelar ambientes geológicos mais realistas, em que corpos bidimensionais podem ter qualquer strike em relação ao EEJ. Neste trabalho apresentamos a solução deste problema sem esta restrição. Assim, mostramos os campos geoeletromagnéticos devidos a estruturas bidimensionais que possuam strike oblíquo em relação ao EEJ, através de perfis dos campos elétrico e magnéticos calculados na superfície e formando direção arbitrária à heterogeneidade condutiva 2-D. Com esta resposta avaliamos ainda qual a influência que estruturas bidimensionais exercem sobre a resposta magnetotelúrica, sob influência do Eletrojato Equatorial. Durante o desenvolvimento deste trabalho, utilizamos o método de elementos finitos, tendo por fonte eletromagnética o EEJ e o CEJ, que por sua vez foram representados por uma combinação de distribuições gaussianas de densidade de corrente. Estas fontes foram decompostas nas direções paralela e perpendicular à estrutura 2-D, resultando nos modos de propagação TE₁ e TE₂ e TM acoplados, respectivamente. Resolvemos o modo acoplado aplicando uma Transformada de Fourier nas equações de Maxwell e uma Transformada Inversa de Fourier na solução encontrada. De acordo com os experimentos numéricos realizados em um modelo interpretativo da Anomalia Condutiva da Bacia do Parnaíba, formado por uma enorme estrutura de 3000 ohm-m dentro de um corpo externo condutivo (1 ohm-m), concluímos que a presença do CEJ causa uma inversão na anomalia, se compararmos com o resultado do EEJ. Concluímos também que para as frequências mais altas as componentes do campo elétrico apresentam menor influência da parte interna do corpo 2-D do que da parte externa. Já para frequências mais baixas este comportamento se observa com as componentes do campo magnético. Com relação à frequência, vimos os efeitos do “skin-depth”, principalmente nas respostas magnéticas. Além disso, quando a estrutura 2-D está paralela ao eletrojato, o campo elétrico é insensível à estrutura interna do modelo para todos os valores de frequência utilizados. Com respeito ao ângulo θ_h entre a heterogeneidade e a fonte, vimos que o modo TM se manifesta naturalmente quando θ_h é diferente de 0°. Neste caso, o modo TE é composto por uma parte devido à componente da fonte paralela à heterogeneidade e a outra devido à componente da fonte perpendicular, que é acoplada ao modo TM. Assim, os campos calculados têm relação direta com o valor de θ_h. Analisando a influência do ângulo entre a direção do perfil dos campos e o strike da heterogeneidade verificamos que, à medida que θ_h se aproxima de 90°, os campos primários tornam-se variáveis para valores de θ_p diferentes de 90°. Estas variações causam uma assimetria na anomalia e dão uma idéia da inclinação da direção do perfil em relação aos corpos. Finalmente, concluímos que uma das influências que a distância entre o centro do EEJ e o centro da estrutura 2-D, causa sobre as componentes dos campos está relacionado às correntes reversas do EEJ e CEJ, pois a 500 km do centro da fonte estas correntes têm máxima intensidade. No entanto, com o aumento da distância, as anomalias diminuem de intensidade. Nas sondagens MT, nós também usamos o EEJ e o CEJ como fonte primária e comparamos nossos resultados com a resposta da onda plana. Deste modo observamos que as componentes do campo geoeletromagnético, usadas para calcular a impedância, têm influência do fator de acoplamento entre os modos TE₂ e TM. Além disso, esta influência se torna maior em meios resistivos e nas frequências mais baixas. No entanto, o fator de acoplamento não afeta os dados magnetotelúricos em frequências maiores de 10^-2 Hz. Para frequências da ordem de 10^-4 Hz os dados MT apresentam duas fontes de perturbação: a primeira e mais evidente é devido à presença fonte 2-D (EEJ e CEJ), que viola a hipótese da onda plana no método MT; e a segunda é causada pelo acoplamento entre os modos TE₂ e TM, pois quando a estrutura bidimensional está obliqua à fonte 2-D temos correntes elétricas adicionais ao longo da heterogeneidade. Concluimos assim, que o strike de uma grande estrutura condutiva bidimensional relativamente à direção do EEJ ou CEJ tem de fato influência sobre o campo geomagnético. Por outro lado, para estudos magnetotelúricos rasos (frequências maiores de 10^-3 Hz) o efeito do ângulo entre a estrutura geológica 2-D e a direção do EEJ não é tão importante. Contudo, em estudos de litosfera frequências menores de 10^-3 Hz) o acoplamento entre os modos TE₂ e TM não pode ser ignorado.

Investigação da condução elétrica em fitas duplas de dna imobilizadas em eletrodos de ouro por medidas eletroquímicas

Pós-graduação em Química - IQ