Certificação duma parte M "completa" (subparte G + F) para aviação geral

O presente trabalho foi realizado no âmbito de um estágio curricular, em parceria com o Instituto de Formação Aeronáutica, tendo como tema a “Certificação de uma Parte M completa (Subparte G + F) para Aviação Geral”. Note-se que quando o autor faz referência à aviação geral, dirige-se às aeronaves não envolvidas no transporte aéreo comercial e cuja massa máxima à descolagem é inferior ou igual a 5700 kg. No entanto no desenrolar da elaboração deste trabalho, o IFA optou pela obtenção da certificação de acordo com a Parte 145, o que permitirá a realização de manutenção no âmbito da aviação comercial e geral, o que torna irrazoável a certificação apenas de acordo com a Parte M Subparte F, já que esta se direcciona única e exclusivamente para a aviação geral. Por conseguinte, o autor optou por desenvolver e abordar apenas a certificação de acordo com a Parte M Subparte G. Com efeito, como principal objectivo pretende-se elaborar um Manual de Gestão da Continuidade da Aeronavegabilidade, por forma a criar as condições necessárias para certificar uma nova empresa, vulgo “start-up”, a ser incubada no IFA, como uma Organização de Gestão da Continuidade da Aeronavegabilidade de acordo com a Parte M Subparte G. O referido manual permitirá demonstrar perante a Autoridade Aeronáutica que a empresa em apreço preenche os requisitos exigidos e definidos na Regulamentação aplicável. Mais se pretende com este trabalho trazer benefícios para a nova empresa a incubar no IFA, designadamente acelerar todo o processo de formação e permitir que a mesma se possa inserir no mercado com a maior brevidade possível. Importa ainda realçar que o trabalho desenvolvido implicou o levantamento e a análise minuciosa de toda a Legislação e Regulamentação relacionada com a Continuidade da Aeronavegabilidade de aeronaves e seus componentes.

Mobi_System: A Personal Travel Assistance for Electrical Vehicles in Smart Cities

In this work it is proposed the design of a mobile system to assist car drivers in a smart city environment oriented to the upcoming reality of Electric Vehicles (EV). Taking into account the new reality of smart cites, EV introduction, Smart Grids (SG), Electrical Markets (EM), with deregulation of electricity production and use, drivers will need more information for decision and mobility purposes. A mobile application to recommend useful related information will help drivers to deal with this new reality, giving guidance towards traffic, batteries charging process, and city mobility infrastructures (e. g. public transportation information, parking places availability and car & bike sharing systems). Since this is an upcoming reality with possible process changes, development must be based on agile process approaches (Web services).

Intelligent energy resources management in the context of smart grids

Smart grids are envisaged as infrastructures able to accommodate all centralized and distributed energy resources (DER), including intensive use of renewable and distributed generation (DG), storage, demand response (DR), and also electric vehicles (EV), from which plug-in vehicles, i.e. gridable vehicles, are especially relevant. Moreover, smart grids must accommodate a large number of diverse types or players in the context of a competitive business environment. Smart grids should also provide the required means to efficiently manage all these resources what is especially important in order to make the better possible use of renewable based power generation, namely to minimize wind curtailment. An integrated approach, considering all the available energy resources, including demand response and storage, is crucial to attain these goals. This paper proposes a methodology for energy resource management that considers several Virtual Power Players (VPPs) managing a network with high penetration of distributed generation, demand response, storage units and network reconfiguration. The resources are controlled through a flexible SCADA (Supervisory Control And Data Acquisition) system that can be accessed by the evolved entities (VPPs) under contracted use conditions. A case study evidences the advantages of the proposed methodology to support a Virtual Power Player (VPP) managing the energy resources that it can access in an incident situation.

A new bridge between leptonic CP violation and leptogenesis

Flavour effects due to lepton interactions in the early Universe may have played an important role in the generation of the cosmological baryon asymmetry through leptogenesis. If the only source of high-energy CP violation comes from the left-handed leptonic sector, then it is possible to establish a bridge between flavoured leptogenesis and low-energy leptonic CP violation. We explore this connection taking into account our present knowledge about low-energy neutrino parameters and the matter-antimatter asymmetry observed in the Universe. In this framework, we find that leptogenesis favours a hierarchical light neutrino mass spectrum, while for quasi-degenerate and inverted hierarchical neutrino masses there is a very narrow allowed window. The absolute neutrino mass scale turns out to be m less than or similar to 0.1 eV. (c) 2007 Elsevier B.V. All rights reserved.

Thermodynamic pathway for the formation of SnSe and SnSe2 polycrystalline thin films by selenization of metal precursors

In this work, tin selenide thin films (SnSex) were grown on soda lime glass substrates by selenization of dc magnetron sputtered Sn metallic precursors. Selenization was performed at maximum temperatures in the range 300 °C to 570 °C. The thickness and the composition of the films were analysed using step profilometry and energy dispersive spectroscopy, respectively. The films were structurally and optically investigated by X-ray diffraction, Raman spectroscopy and optical transmittance and reflectance measurements. X-Ray diffraction patterns suggest that for temperatures between 300 °C and 470 °C, the films are composed of the hexagonal-SnSe2 phase. By increasing the temperature, the films selenized at maximum temperatures of 530 °C and 570 °C show orthorhombic-SnSe as the dominant phase with a preferential crystal orientation along the (400) crystallographic plane. Raman scattering analysis allowed the assignment of peaks at 119 cm−1 and 185 cm−1 to the hexagonal-SnSe2 phase and those at 108 cm−1, 130 cm−1 and 150 cm−1 to the orthorhombic-SnSe phase. All samples presented traces of condensed amorphous Se with a characteristic Raman peak located at 255 cm−1. From optical measurements, the estimated band gap energies for hexagonal-SnSe2 were close to 0.9 eV and 1.7 eV for indirect forbidden and direct transitions, respectively. The samples with the dominant orthorhombic-SnSe phase presented estimated band gap energies of 0.95 eV and 1.15 eV for indirect allowed and direct allowed transitions, respectively.

Cu2ZnSnS4 absorber layers obtained through sulphurization of metallic precursors: Graphite box versus sulphur flux

In this work we employed a hybrid method, combining RF-magnetron sputtering with evaporation, for the deposition of tailor made metallic precursors, with varying number of Zn/Sn/Cu (ZTC) periods and compared two approaches to sulphurization. Two series of samples with 1×, 2× and 4× ZTC periods have been prepared. One series of precursors was sulphurized in a tubular furnace directly exposed to a sulphur vapour and N2+5% H2 flux at a pressure of 5.0×10+4 Pa. A second series of identical precursors was sulphurized in the same furnace but inside a graphite box where sulphur pellets have been evaporated again in the presence of N2+5% H2 and at the same pressure as for the sulphur flux experiments. The morphological and chemical analyses revealed a small grain structure but good average composition for all three films sulphurized in the graphite box. As for the three films sulphurized in sulphur flux grain growth was seen with the increase of the number of ZTC periods whilst, in terms of composition, they were slightly Zn poor. The films' crystal structure showed that Cu2ZnSnS4 is the dominant phase. However, in the case of the sulphur flux films SnS2 was also detected. Photoluminescence spectroscopy studies showed an asymmetric broad band emission whichoccurs in the range of 1–1.5 eV. Clearly the radiative recombination efficiency is higher in the series of samples sulphurized in sulphur flux. We have found that sulphurization in sulphur flux leads to better film morphology than when the process is carried out in a graphite box in similar thermodynamic conditions. Solar cells have been prepared and characterized showing a correlation between improved film morphology and cell performance. The best cells achieved an efficiency of 2.4%.

Calix[4]arene-carbazole-containing polymers: synthesis and properties

New highly fluorescent calix[4]arene-containing phenylene-alt-ethynylene-3,6- and 2,7-carbazolylene polymers (CALIX-PPE-CBZs) have been synthesized for the first time and their photophysical properties evaluated. Both polymers were obtained in good isolated yields (70-84%), having M-w ranging from 7660-26,700 g mol(-1). It was found that the diethynyl substitution (3,6- or 2,7-) pattern on the carbazole monomers markedly influences the degree of polymerization. The amorphous yellow polymers are freely soluble in several nonprotic organic solvents and have excellent film forming abilities. TG/DSC analysis evidences similar thermal behaviors for both polymers despite their quite different molecular weight distributions and main-chain connectivities (T-g, in the range 83-95 degrees C and decomposition onsets around 270 degrees C). The different conjugation lengths attained by the two polymers dictates much of their photophysical properties. Thus, whereas the fully conjugated CALIX-PPE-2,7-CBZ has its emission maximum at 430 nm (E-g = 2.84 eV; Phi(F) = 0.62, CHCl3), the 3,6-linked counterpart (CALIX-PPE-3,6-CBZ) fluoresces at 403 nm with a significant lower quantum yield (E-g = 3.06 eV; Phi(F) = 0.31, CHCl3). The optical properties of both polymers are predominantly governed by the intrachain electronic properties of the conjugated backbones owing to the presence of calix[4]arenes along the polymer chain which disfavor significant interchain interactions, either in fluid- or solid-state.

Synthesis of titanate nanostructures using amorphous precursor material and their adsorption/photocatalytic properties

This article reports on a new and swift hydrothermal chemical route to prepare titanate nanostructures (TNS) avoiding the use of crystalline TiO2 as starting material. The synthesis approach uses a commercial solution of TiCl3 as titanium source to prepare an amorphous precursor, circumventing the use of hazardous chemical compounds. The influence of the reaction temperature and dwell autoclave time on the structure and morphology of the synthesised materials was studied. Homogeneous titanate nanotubes with a high length/diameter aspect ratio were synthesised at 160 degrees C and 24 h. A band gap of 3.06 +/- 0.03 eV was determined for the TNS samples prepared in these experimental conditions. This value is red shifted by 0.14 eV compared to the band gap value usually reported for the TiO2 anatase. Moreover, such samples show better adsorption capacity and photocatalytic performance on the dye rhodamine 6G (R6G) photodegradation process than TiO2 nanoparticles. A 98% reduction of the R6G concentration was achieved after 45 min of irradiation of a 10 ppm dye aqueous solution and 1 g L-1 of TNS catalyst.

Is the electric vehicle a solution for the wind power integration in the portuguese power system?

The integration of Plug-in electric vehicles in the transportation sector has a great potential to reduce oil dependency, the GHG emissions and to contribute for the integration of renewable sources into the electricity generation mix. Portugal has a high share of wind energy, and curtailment may occur, especially during the off-peak hours with high levels of hydro generation. In this context, the electric vehicles, seen as a distributed storage system, can help to reduce the potential wind curtailments and, therefore, increase the integration of wind power into the power system. In order to assess the energy and environmental benefits of this integration, a methodology based on a unit commitment and economic dispatch is adapted and implemented. From this methodology, the thermal generation costs, the CO2 emissions and the potential wind generation curtailment are computed. Simulation results show that a 10% penetration of electric vehicles in the Portuguese fleet would increase electrical load by 3% and reduce wind curtailment by only 26%. This results from the fact that the additional generation required to supply the electric vehicles is mostly thermal. The computed CO2 emissions of the EV are 92 g CO2/kWh which become closer to those of some new ICE engines.

Efeito de concentrações subinibitórias de penicilina sobre antígenos de estreptococos do grupo G

O efeito de concentrações subinibitórias de penicilina sobre a produção do antígeno grupo-específico e da hialuronidase extracelular foi avaliado em uma amostra de estreptococo pertencente ao grupo G de Lancefield. Em todas as concentrações uma maior quantidade de antígeno grupo-específico foi extraída das células e a atividade específica de hialuronidase se mostrou aumentada em até 1400% nos sobrenadantes das culturas. O maior aumento na expressão de ambos os antígenos foi observado em 1/2 da CMI.

Radioactivity levels of 238U and 232Th decay series and related dose rates in the surroundings of a coal power plant using high resolution g-spectrometry

Gamma radiations measurements were carried out in the vicinity of a coal-fired power plant located in the southwest coastline of Portugal. Two different gamma detectors were used to assess the environmental radiation within a circular area of 20 km centred in the coal plant: a scintillometer (SPP2 NF, Saphymo) and a high purity germanium detector (HPGe, Canberra). Fifty urban and suburban measurements locations were established within the defined area and two measurements campaigns were carried out. The results of the total gamma radiation ranged from 20.83 to 98.33 counts per second (c.p.s.) for both measurement campaigns and outdoor doses rates ranged from 77.65 to 366.51 Gy/h. Natural emitting nuclides from the U-238 and Th-232 decay series were identified as well as the natural emitting nuclide K-40. The radionuclide concentration from the uranium and thorium series determined by gamma spectrometry ranged from 0.93 to 73.68 Bq/kg, while for K-40 the concentration ranged from 84.14 to 904.38 Bq/kg. The obtained results were used primarily to define the variability in measured environmental radiation and to determine the coal plant’s influence in the measured radiation levels. The highest values were measured at two locations near the power plant and at locations between the distance of 6 and 20 km away from the stacks, mainly in the prevailing wind direction. The results showed an increase or at least an influence from the coal-fired plant operations, both qualitatively and quantitatively.

Quimiotipagem do Cryptococcus neoformans. Revisão da literatura. Novos dados epidemiológicos sobre a criptococose. Nossa experiência com o emprego do meio de C.G.B. no estudo daquela levedura

O presente trabalho, além da revisão da literatura sobre quimiotipagem do C. neoformans, com novos dados sobre a epidemiologia da criptococose, teve por finalidade principal a caracterização das duas variedades desta levedura em pacientes com neurocriptococose, HIV + e HIV -. As variedades neoformans e gattii estão hoje bem definidas bioquimicamente, com o emprego do meio C.G.B., proposto por KWON-CHUNG et al. (1982) 24. O isolamento do C. neoformans var. gattii das flores e folhas do Eucalyptus camaldulensis e do Eucalyptus tereticornis, na Austrália, através dos trabalhos de ELLIS & PFEIFFER (1990)16 e PFEIFFER & ELLIS (1992)41, possibilitou investigações epidemiológicas das mais interessantes sobre este microrganismo, levedura capsulada a qual SANFELICE50, 51, na Itália, em 1894 e 1895 despertou a atenção do meio médico. BUSSE8, em 1894, descrevia o primeiro caso de criptococose humana sob a forma de lesão óssea, simulando sarcoma. As pesquisas nacionais sobre o assunto em foco foram destacadas, seguindo-se a experiência dos Autores com o meio de C.G.B. (L - canavanina, glicina e azul de bromotimol). Foi possível, através deste meio o estudo de 50 amostras de líquor, sendo 39 procedentes de aidéticos (78%) e 11 de não aidéticos (22%). De pacientes HIV+, 37 (74%) foram identificados como C. neoformans var. neoformans e 2 (4%) como C. neoformans var. gattii. Dos HIV- 8 ( 16%) foram classificados como C. neoformans var. neoformans e 3 (6%) como C. neoformans var. gattii. Através deste trabalho, evidencia-se a importância da neurocriptococose, principalmente entre os aidéticos, demonstrando-se mais uma vez o interesse do meio CGB na quimiotipagem do C. neoformans em suas duas variedades, ganhando em importância a demonstração de que duas espécies de eucalipto podem funcionar como "árvores-hospedeiras" para o Cryptococcus neoformans var. gattii.

Hepatitis G virus / GB virus C in Brazil. Preliminary report

Hepatitis G virus/ GB virus C is a novel flavivirus recently detected in hepatitis non A-E cases. In this study, the presence of this virus in chronic non-B, non-C hepatitis patients was evaluated using GBV-C specific PCR and this virus was detected in one out of thirteen patients. This patient has presented a severe liver failure, has lived for a long time in the Western Amazon basin and no other cause for this clinical picture was reported. The impact of the discovery of this new agent is still under evaluation throughout the world. The study of the prevalence of this virus among chronic hepatitis patients and healthy individuals (as blood donors) will furnish subside to evaluate its real pathogenicity.

GB virus C/Hepatitis G virus and other putative hepatitis non A-E viruses

The identification of the major agents causing human hepatitis (Hepatitis A, B, C, D and E Viruses) was achieved during the last 30 years. These viruses are responsible for the vast majority of human viral hepatitis cases, but there are still some cases epidemiologically related to infectious agents without any evidence of infection with known virus, designated as hepatitis non A - E. Those cases are considered to be associated with at least three different viruses: 1 - Hepatitis B Virus mutants expressing its surface antigen (HBsAg) with altered epitopes or in low quantities; 2 - Another virus probably associated with enteral transmitted non A-E hepatitis, called Hepatitis F Virus. Still more studies are necessary to better characterize this agent; 3 - Hepatitis G Virus or GB virus C, recently identified throughout the world (including Brazil) as a Flavivirus responsible for about 10% of parenteral transmitted hepatitis non A-E. Probably still other unknown viruses are responsible for human hepatitis cases without evidence of infection by any of these viruses, that could be called as non A-G hepatitis.