Impact assessment and quality analysis of corporate social responsability (CSR) programs of mining companies and their contribution to sustainable development in the communities they operate: case study Tenke Fungurume Mining SA in the Democratic Republic of Congo (DRC)

Purpose – This case study presents an impact assessment of Corporate Social Responsibility (CSR) programs of the TFM Company in order to understand how they contribute to the sustainable development of communities in areas in which they operate. Design/Methodology/Approach - Data for this study was collected using qualitative data methods that included semi-structured interviews and Focus Group Discussions most of them audio and video recorded. Documentary analysis and a field visit were also undertaken for the purpose of quality analysis of the CSR programs on the terrain. Data collected was analyzed using the Seven Questions to sustainability (7Qs) framework, an evaluation tool developed by the Mining, Minerals and Sustainable Development (MMSD) North America chapter. Content analysis method was on the other hand used to examine the interviews and FGDs of the study participants. Findings - Results shows that CSR programs of TFM SA do contribute to community development, as there have been notable changes in the communities’ living conditions. But whether they have contributed to sustainable development is not yet the case as programs that enhance the capacity of communities and other stakeholders to support these projects development beyond the implementation stage and the mines operation lifetime need to be considered and implemented. Originality/Value – In DRC, there is paucity of information of research studies that focus on impact assessment of CSR programs in general and specifically those of mining companies and their contribution to sustainable development of local communities. Many of the available studies cover issues of minerals and conflict or conflict minerals as mostly referred to. This study addressees this gap.

Thermoeconomic analysis of an evaporative desiccant air conditioning system

In this paper, a thermoeconomic analysis method based on the first and second law of thermodynamics and applied to an evaporative cooling system coupled to an adsorption dehumidifier, is presented. The main objective is the use of a method called exergetic manufacturing cost (EMC) applied to a system that operates in three different conditions to minimize the operation costs. Basic parameters are the RIP ratio (reactivation air/process air) and the reactivation air temperature. Results of this work show that the minimum reactivation temperature and the minimum RIP ratio corresponds to the smaller EMC. This result can be corroborated through an energetic analysis. It is noted that this case is also the one corresponding to smaller energy loss. (C) 2003 Elsevier B.V. Ltd. All rights reserved.

Ergonomics work analysis applied to dentistry - a Brazilian case study

This paper presents the Ergonomic Work Analysis method in a Brazilian Dentist's office. Through the study, the constraints and the strategies in avoiding them were identified. It was found that dentists hardly use the position most indicated by the International Organization for Standardization (ISO) and the Federation Dentaire Internacionale (FDI) for both the patient and the dentist, which is respectively supine and 9 o'clock, due to the limited space and layout. Five types of treatments performed by the professional have been studied. The frequency and duration of actions in these treatments were accounted for and the standard positions adopted were identified. The AET was found to be a very suitable method to grasp the dentist's activity and build a point of view of the profession, which is characterized as: stressful, perfectionist and restrictive. Time management is presented as an important strategy to control the tension arising from performing the treatments.

Carbon isotope analysis in apple nectar beverages

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fault analysis in four-wire distribution networks

The neutral wire in most existing power flow and fault analysis software is usually merged into phase wires using Kron's reduction method. In some applications, such as fault analysis, fault location, power quality studies, safety analysis, loss analysis etc., knowledge of the neutral wire and ground currents and voltages could be of particular interest. A general short-circuit analysis algorithm for three-phase four-wire distribution networks, based on the hybrid compensation method, is presented. In this novel use of the technique, the neutral wire and assumed ground conductor are explicitly represented. A generalised fault analysis method is applied to the distribution network for conditions with and without embedded generation. Results obtained from several case studies on medium- and low-voltage test networks with unbalanced loads, for isolated and multi-grounded neutral scenarios, are presented and discussed. Simulation results show the effects of neutrals and system grounding on the operation of the distribution feeders.

Simultaneous determination of cadmium and lead in wine by electrothermal atomic absorption spectrometry

A method has been developed for the direct simultaneous determination of Cd and Pb in white and red wine by electrothermal atomic absorption spectrometry (ET-AAS) using a transversely heated graphite tube atomizer (THGA) with longitudinal Zeeman-effect background correction. The thermal behavior of both analytes during pyrolysis and atomization stages were investigated in 0.028 mol l(-1) HNO3 and in 1 + 1 v/v diluted wine using mixtures of Pd(NO3)(2) + Mg(NO3)(2) and NH4H2PO4 + Mg(NO3)(2) as chemical modifiers. With 5 mug Pd + 3 mug Mg as the modifiers and a two-step pyrolysis (10 s at 400 degreesC and 10 s at 600 degreesC), the formation of carbonaceous residues inside the atomizer was avoided. For 20 mul of sample (wine + 0.056 mol l(-1) HNO3, 1 + 1, v/v) dispensed into the graphite tube, analytical curves in the 0.10-1.0 mug l(-1) Cd and 5.0-50 mug l(-1) Pb ranges were established. The characteristic mass was approximately 0.6 pg for Cd and 33 pg for Pb, and the lifetime of the tube was approximately 400 firings. The limits of detection (LOD) based on integrated absorbance (0.03 mug l(-1) for Cd, 0.8 mug l(-1) for Pb) exceeded the requirements of Brazilian Food Regulations (decree #55871 from Health Department), which establish the maximum permissible level for Cd at 200 mug l(-1) and for Pb at 500 mug l(-1). The relative standard deviations (n = 12) were typically < 8% for Cd and < 6% for Pb. The recoveries of Cd and Pb added to wine samples varied from 88 to 107% and 93 to 103%, respectively. The accuracy of the direct determination of Cd and Ph was checked for 10 table wines by comparing the results with those obtained for digested wine using single-element ET-AAS, which were in agreement at the 95% confidence level. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Morphological analysis of pits formed on Al 2024-T3 in chloride aqueous solution

It has been used a new image analysis method, based on segmentation by shape parameters, for pits morphology examination from Al 2024 aluminum-copper alloy in chloride aqueous solution. Corrosion behavior of this alloys in naturally aerated 3.5% NaCl solution has been investigated through open circuit potential measurements. Afterwards, pits have been characterized by image analysis taking density and size measurements right from corroded surfaces. Morphological investigation has been conducted for profiles, cut orthogonally from mean surface planes, and observed through light microscopy. Image analysis data could demonstrate that pits are wider than deep, evoluting for conical, quasi-conical or irregular shapes. Most pits have presented a quasi-conical morphology, but the wider ones have evoluted to an irregular shape influenced by sub-surface microstructure. Image analysis based on shape segmentation could enhance the differences on morphological behavior. (C) 2004 Elsevier B.V. All rights reserved.

The asynchronous motor one-dimensional analysis

An application of the linear machine one-dimensional analysis method to the modeling of a conventional asynchronous induction motor, considered as a particular case of linear and sectorial machines, is described. A mathematical model for the calculation of the propulsive force developed by this motor, taking into account the transversal edge effect, is derived from the application of the one-dimensional theory and presented in this paper. As an application example, an induction motor is analyzed by means of the one-dimensional theory.

An image processing method for morphology characterization and pitting corrosion evaluation

A digital image processing and analysis method has been developed to classify shape and evaluate size and morphology parameters of corrosion pits. This method seems to be effective to analyze surfaces with low or high degree of pitting formation. Theoretical geometry data have been compared against experimental data obtained for titanium and aluminum alloys subjected to different corrosion tests. (C) 2002 Elsevier B.V. B.V. All rights reserved.

The dietary regime of detritivorous fish from the River Jacaré Pepira, Brazil

The diet of detritivorous fish was analysed at four distinct habitats in a tropical river during the wet and dry seasons. Two methodologies were used to determine the diet of the fish: (1) the direct analysis of the stomach contents; and (2) the use of stable carbon isotopes. Both methods indicated food partitioning among the fish. The stomach contents showed what the fish had ingested when captured and the 13C isotope indicated what it had assimilated over a long period of time. The 13C isotope suggested the existence of sectional differences in the feeding of the detritivorous fish along the river. Plants employing the C4 photosynthesis pathways seem to have little influence on the diet of these fish. This method proved to be more appropriate for the detection of the main food sources of the captured fish.

Thermoeconomic analysis of a cogeneration system of a university campus

In this paper, a thermoeconomic analysis method based on the First and the Second Law of Thermodynamics and applied to analyse the replacement of an equipment of a cogeneration system is presented. The cogeneration system consists of a gas turbine linked to a waste boiler. The electrical demand of the campus is approximately 9 MW but the cogen system generates approximately one third of the university requirement as well as 1.764 kg/s of saturated steam (at 0.861 MPa), approximately, from a single fuel source. The energy-economic study showed that the best system, based on pay-back period and based on the maximum savings (in 10 years), was the system that used the gas turbine M1T-06 of Kawasaki Heavy Industries and the system that used the gas turbine CCS7 of Hitachi Zosen, respectively. The exergy-economic study showed that the best system, which has the lowest EMC, was the system that used the gas turbine ASE50 of Allied Signal. © 2002 Elsevier Science Ltd. All rights reserved.

Avaliação de diferentes métodos no diagnóstico laboratorial de Giardia lamblia

The protozoan parasite Giardia lamblia is responsible for a common intestinal infection in all regions of the world. In this study, four laboratory tests were evaluated for diagnostic reproducibility in the detection of this infection: Coprotest®, Direct modified method, Faust method and iron-hematoxylin staining. Positive diagnoses were tested for association with factors such as the age group and gender of the subject and the month when the sample was taken. Feces of 200 children in the Araraquara region (SP, Brazil) were examined by all four methods and the results compared. G. lamblia was found to be the most frequent parasite and 8.0% of the children showed giardiasis. There was no apparent correlation with gender, but most of the parasites were found in three- to five-year-olds. The highest frequency of infection occurred in January. The most reliable diagnostic results for G. lamblia were achieved by combining at least two methods of good reproducibility, i.e. Coprotest-Faust, Direct-Faust or Coprotest-Direct (A > 0.81).

Utilização de bulked segregant analysis na identificação de marcadores ligados a genes que controlam a resistência à ferrugem (Puccinia psidii Winter) em Eucalyptus sp

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Hidrocarbonetos policíclicos aromáticos em sedimentos e organismos bentônicos do Terminal de Miramar (Baía do Guajará - Belém - Pará - Amazônia)

ABSTRACT: In Guajará bay, mouth of the Amazon River, is located the capital of Pará state (Belém) and its metropolitan area. Exists in this area an intense boat traffic, as well as transportation and sale of fuels in floating docks and activities related to the storage and transportation of oil in Miramar Petrochemical Terminal (TEMIR). Small spills and discharges of oil in water can serve as sources of pollution by polycyclic aromatic hydrocarbons (PAHs). PAHs are organic compounds generated by incomplete combustion of organic matter (OM) and are among the contaminants of most interest in environmental studies due to their mutagenic and carcinogenic potential. One way to detect and evaluate the impact of PAHs in an environment is using biomonitors, however the qualitative and quantitative analysis in sediments are most widely used. This study aimed to evaluate, by Gas Chromatography/Mass Spectrometry (GC/MS), the 16 PAHs considered as priority by the Environmental Protection Agency of the United States in sediments and benthic organisms (Namalicastys abiuma) of TEMIR. Field expeditions were carried out in December 2012, March, May and June 2013 representing the dried, wet (two samples) and dried seasons successively. Fine sediments levels dominated in both sampling periods and the %Fines in Guajará bays has a direct relationship to the %OM. In relation to the 16 PAHs studied, 10 of them were detected in the wet season sediments samples and 8 in the dried season. Even with a low diversity of aromatic compounds, sediment samples of the dried season presented greater ΣHPAs (1.351,43 ng g^-1) than the sediments of the wet season (263,99 ng g^-1), which can be related to the increased hydrodynamic in Guajará bay this last period. Correlation analysis indicated that ΣHPAs not seem to be influenced by %Fine and %OM. Benzo(a)pyrene accounted for 87% of ΣHPAs during the wet season, the other PAHs showed percentage ≤ 3%. During the other period stood out: pyrene (18% of ΣHPAs) fluoranthene (16%), the chrysene, benzo(b)fluoranthene (15%) and benzo(a)pyrene (11%). The use of the geochemical reason to interpret likely sources of PAHs indicated that there is a predominance of aromatics from pyrolytic origin in TEMIR. The activities that may be responsible for the PAHs levels observed in sediments and benthic organisms in TEMIR are the discharge of untreated domestic sewage and the emissions of particulates from cars and small/medium boats. The ΣHPAs seems to influence the density of polychaetes because a reduction of about 50% in the number of organisms was observed during the dry season when there was the greater amount of ΣHPAs in their body structure. Among the 16 PAHs studied, 11 were detected in the polychaetes during the dry season (ΣHPAs_MED = 848,71 ng g^-1) and 10 in the wet season (ΣHPAs_MED = 141,85 ng g^-1). Were highlighted during the dried season: indeno(1,2,3-c,d)pyrene (47%) and pyrene (23%). While in the wet season: pyrene (23%), chrysene (17%), fluorene (17%) and fluoranthene (13%). The %Rec obtained was >>100% indicating a matrix effect and reducing the quantitative accuracy of results. The use of the polychaete N. abiuma as biomonitor of pollution by PAHs in estuaries not seem to be effective when the sample period is limited, because collecting it requires a great effort to obtain a small amount of mass and it still results in a matrix effect in the chromatographic analysis (method %Rec >> 100%) that may not be corrected due to the restricted availability of sample mass. Studies with a larger number of samples, enabling depth statistical analysis, and covering other collection points in Guajará bay are required to prove mathematically that has been stated in this dissertation.

Cephalometric analysis for the diagnosis of sleep apnea: a comparative study between reference values and measurements obtained for Brazilian subjects

OBJECTIVE: To verify if the reference values of Sleep Apnea cephalometric analysis of North American individuals are similar to the ones of Brazilian individuals presenting no craniofacial anomalies. The study also aimed to identify craniofacial alterations in Obstructive Sleep Apnea-Hypopnea Syndrome (OSAHS) patients in relation to individuals without clinical characteristics of the disease through this cephalometric analysis. METHOD: It were used 55 lateral cephalograms consisting of 29 for the control group of adult individuals without clinical characteristics of OSAHS and 26 apneic adults. All radiographs were submitted to Sleep Apnea cephalometric analysis through Radiocef Studio 2.0. The standard values of this analysis were compared, by means of z test, to the ones obtained from the control group and these were compared to values from apneic group through Student's t test. RESULTS: There were no significant differences between values obtained from control group and standard values. On the group of OSAHS patients it was observed a decrease on the dimensions of upper airways and an increase on the soft palate length. CONCLUSIONS: The standard values of Sleep Apnea analysis can be used as reference in Brazilian individuals. Besides, through lateral cephalograms it was possible to identify craniofacial alterations in OSAHS patients.