Shell Model Study of Local and Global Energy Barriers in KDP

We perform a study of the energetics of KH2PO4 (KDP) by using a shell model (SM) which was constructed by adjusting the interaction parameters to ab initio calculations, and was fitted to reproduce phonons, polarization-inversion energies and structural properties. We calculate the energy profiles by performing global displacements and local distortions following the ferroelectric (FE) mode pattern in clusters of different sizes embedded in a paraelectric (PE) phase matrix. These properties are expected to be relevant to the PE-FE phase transition. The obtained SM results are compared to corresponding ab initio (AI) data. The global instabilities are found in good agreement for both KDP and DKDP. We also find qualitative good agreement in the KDP structure and even quantitative agreement in the expanded DKDP structure for the local distortions. The SM results reproduce well different trends like increasing instabilities as the cluster sizes grows, as the heavier atoms are included, and as the volume is increased, in accordance with the corresponding data from AI calculations.

Web crippling behaviour of cold-formed steel channel sections with offset web holes subjected to interior-two-flange loading

Cold-formed steel sections are often used as wall studs or floor joists; such sections often include web holes for ease of installation of the services. Cold-formed steel design codes, however, do not consider the effect of such web holes. In this paper, a combination of experimental tests and non-linear elasto-plastic finite element analyses are used to investigate the effect of such holes on web crippling under interior-two-flange (ITF) loading conditions; the cases of both flange fastened and flange unfastened are considered. A good agreement between the experimental tests and finite element analyses was obtained. The finite element model was then used for the purposes of a parametric study on the effect of different sizes and position of holes in the web. It was demonstrated that the main factors influencing the web crippling strength are the ratio of the hole depth to the depth of the web, and the ratio of the distance from the edge of the bearing to the flat depth of web. Design recommendations in the form of web crippling strength reduction factors are proposed, that are conservative to both the experimental and finite element results.

Systematic Engineering of Uniform, Highly Efficient, Targeted and Shielded Viral-Mimetic Nanoparticles

In the past decades, numerous types of nanomedicines have been developed for the efficient and safe delivery of nucleic acid-based drugs for cancer therapy. Given that the destination sites for nucleic acid-based drugs are inside cancer cells, delivery systems need to be both targeted and shielded in order to overcome the extracellular and intracellular barriers. One of the major obstacles that has hindered the translation of nanotechnology-based gene-delivery systems into the clinic has been the complexity of the design and assembly processes, resulting in non-uniform nanocarriers with unpredictable surface properties and efficiencies. Consequently, no product has reached the clinic yet. In order to address this shortcoming, a multifunctional targeted biopolymer is genetically engineered in one step, eliminating the need for multiple chemical conjugations. Then, by systematic modulation of the ratios of the targeted recombinant vector to PEGylated peptides of different sizes, a library of targeted-shielded viral-mimetic nanoparticles (VMNs) with diverse surface properties are assembled. Through the use of physicochemical and biological assays, targeted-shielded VMNs with remarkably high transfection efficiencies (>95%) are screened. In addition, the batch-to-batch variability of the assembled targeted-shielded VMNs in terms of uniformity and efficiency is examined and, in both cases, the coefficient of variation is calculated to be below 20%, indicating a highly reproducible and uniform system. These results provide design parameters for engineering uniform, targeted-shielded VMNs with very high cell transfection rates that exhibit the important characteristics for in vivo translation. These design parameters and principles could be used to tailor-make and assemble targeted-shielded VMNs that could deliver any nucleic acid payload to any mammalian cell type.

The impact of global routing on the performance of NoCs in FPGAs

With the over-provisioned routing resource on FPGA, the topology choice for NoC implementation on FPGA is more flexible than on ASIC. However, it is well understood that the global wire routing impacts the performance of NoC on FPGA because the topology is routed by using fixed routing fabric. An important question that arises is: will the benefit of diameter reduction by using a highly connective topology outweigh the impact of global routing? To answer this question, we investigate FPGA based packet switched NoC implementations with different sizes and topologies, and quantitatively measure the impact of global routing to each of these networks. The result shows that with sufficient routing resources on modern FPGA, the global routing is not on the critical path of the system, and thus is not a dominating factor for the performance of practical multi-hop NoC system. © 2011 IEEE.

Cough-generated aerosols of Pseudomonas aeruginosa and other Gram-negative bacteria from patients with cystic fibrosis

BACKGROUND: Pseudomonas aeruginosa is the most common bacterial pathogen in patients with cystic fibrosis (CF). Current infection control guidelines aim to prevent transmission via contact and respiratory droplet routes and do not consider the possibility of airborne transmission. It was hypothesised that subjects with CF produce viable respirable bacterial aerosols with coughing.

METHODS: A cross-sectional study was undertaken of 15 children and 13 adults with CF, 26 chronically infected with P aeruginosa. A cough aerosol sampling system enabled fractioning of respiratory particles of different sizes and culture of viable Gram-negative non-fermentative bacteria. Cough aerosols were collected during 5 min of voluntary coughing and during a sputum induction procedure when tolerated. Standardised quantitative culture and genotyping techniques were used.

RESULTS: P aeruginosa was isolated in cough aerosols of 25 subjects (89%), 22 of whom produced sputum samples. P aeruginosa from sputum and paired cough aerosols were indistinguishable by molecular typing. In four cases the same genotype was isolated from ambient room air. Approximately 70% of viable aerosols collected during voluntary coughing were of particles <or=3.3 microm aerodynamic diameter. P aeruginosa, Burkholderia cenocepacia, Stenotrophomonas maltophilia and Achromobacter xylosoxidans were cultivated from respiratory particles in this size range. Positive room air samples were associated with high total counts in cough aerosols (p = 0.003). The magnitude of cough aerosols was associated with higher forced expiratory volume in 1 s (r = 0.45, p = 0.02) and higher quantitative sputum culture results (r = 0.58, p = 0.008).

CONCLUSION: During coughing, patients with CF produce viable aerosols of P aeruginosa and other Gram-negative bacteria of respirable size range, suggesting the potential for airborne transmission.

Distribuição por tamanhos do aerosol atmosférico na Península Ibérica

Um dos principais fatores que afetam negativamente a qualidade do ambiente em muitas cidades em todo o mundo é o material particulado (PM). A sua presença na atmosfera pode ter impactos negativos na saúde humana, clima, património edificado e ecossistemas. Muitos dos estudos realizados em áreas urbanas focam apenas as frações respiráveis (PM10 e PM2,5). No entanto, os processos de formação, a identificação das fontes emissoras e os efeitos dependem muito da distribuição granulométrica das partículas. A atenção tem recaído na análise de hidrocarbonetos poliaromáticos (PAHs), devida à sua carcinogenicidade e a informação disponível sobre outros compostos é escassa. O presente estudo consistiu na obtenção do PM distribuído por diferentes frações de tamanho e na análise detalhada da sua composição química, em dois locais urbanos da Península Ibérica (Madrid e Lisboa). Dado que os veículos representam uma das principais fontes emissoras em ambientes urbanos, efetuou-se uma caracterização mais detalhada deste tipo de emissões, conduzindo uma campanha de amostragem num túnel rodoviário (Marquês de Pombal, Lisboa). As amostragens, em ambas as cidades, decorreram durante um mês, quer no verão quer no inverno, em dois locais urbanos distintos, um junto a uma via com influência de tráfego e outro numa área urbana de fundo. No túnel a amostragem foi realizada apenas durante uma semana. Em Madrid e no túnel, o PM foi recolhido utilizando um amostrador de elevado volume com impactor em cascata com quatro tamanhos: 10-2,5, 2,5-0,95, 0,95-0,49 e < 0,49 μm. Em Lisboa, foi utilizado um impactor em cascata com apenas dois tamanhos, 10- 2,5 e < 2,5 μm. As amostras foram quimicamente analisadas e determinadas as concentrações de compostos carbonados (OC, EC e carbonatos), iões inorgânicos solúveis em água (Cl−, NO3−, SO42−, Na+, NH4+, K+, Mg2+, Ca2+),metais e compostos orgânicos. Em Madrid, as concentrações médias de PM10 foram 44 e 48% maiores nas amostras recolhidas junto à estrada do que as de fundo urbano no verão e inverno, respetivamente. A fração grosseira e o PM0,5 apresentaram concentrações mais elevadas no verão do que no inverno devido às condições climatéricas pouco usuais. No verão, as amostragens decorreram num mês em que as temperaturas foram muito elevadas e em que ocorreram vários episódios de intrusão de poeira africana. Durante o período de amostragem de inverno, as temperaturas foram muito baixas e registaram-se vários dias de precipitação quer sob a forma de chuva, quer sob a forma de neve. As situações meteorológicas sinóticas mais comuns, incluindo aquelas que causam o transporte de massas de ar com poeiras Africanas, foram identificadas em ambas as estações do ano. As concentrações mássicas de PM10, EC e OC foram encontrados predominantemente na fração de tamanho ultrafino em ambos os locais de amostragem e estações do ano. Nas restantes frações não se observou nenhuma tendência sazonal. O carbono orgânico secundário (SOC) mostrou um claro padrão sazonal, com concentrações muito mais elevadas no verão do que no inverno, em ambos os lugares. A partir do balanço mássico de iões, observou-se que, no verão, a formação de compostos inorgânicos secundários (SIC) conduziu a um enriquecimento pouco comum de Ca2+ na fração submicrométrica, quer nas amostras de tráfego, quer em fundo urbano. Os alcanos, PAHs, os álcoois e os ácidos foram as classes de compostos orgânicos identificados e quantificados no material particulado. Globalmente, representaram 0,26 e 0,11 μg m−3 no verão e inverno, respetivamente, no local de tráfego e 0,28 e 0,035 μg m−3 na área urbana de fundo. Os diferentes compostos orgânicos também apresentaram padrões sazonais, sugerindo fontes de emissão (e.g. escapes dos veículos e fontes biogénicas) ou processos de formação com contribuições variáveis ao longo do ano. As concentrações de benzoapireno equivalente foram menores que 1 ng m-3 e o risco carcinogénico estimado é baixo. No verão, os maiores enriquecimentos de metais ocorreram na fração submicrométrica, e no inverno na fração grosseira. No verão, os enriquecimentos foram ≥ 80% para o Mn, Ni, Cu, Zn, Cd, Sb e Co, no inverno, estes traçadores de emissões do tráfego foram menores, exceto para o Zn. Em Lisboa, a concentração média de PM10 foi de 48 μg m-3 no verão e de 44 μg m-3 no inverno, junto à estrada. Na área de fundo urbano, registaram-se níveis comparáveis nas duas estações (27 μg m-3 e 26 μg m-3). A média do rácio PM2,5/PM10 foi de 65% no verão e 44% no inverno na área de tráfego e 62% e 59% na área urbana de fundo. Estes resultados significam que o PM2,5 é um dos principais contaminantes que afetam a qualidade do ar no centro da cidade de Lisboa. A relação OC/EC, que reflete a composição das emissões de combustão dos veículos, variou entre 0,3 e 0,4 no interior do túnel. Os rácios de OC/EC mínimos obtidos junto às vias de tráfego em Madrid e em Lisboa encontram-se entre os do túnel e os registados em atmosferas urbanas de fundo, sugerindo que os valores mínimos habitualmente obtidos para este parâmetro em ambientes urbanos abertos sobrestimam as emissões diretas de OC pelo transporte rodoviário. Espera-se que os resultados deste trabalho contribuam para suprir, pelo menos em parte, as lacunas de informação quer sobre a composição de várias granulometrias de PM, quer sobre fontes e processos de formação em atmosferas urbanas. Como a exposição a poluentes do ar ultrapassa o controle dos indivíduos e exige ação das autoridades públicas a nível nacional, regional e até mesmo internacional, é importante propor medidas mitigadoras focadas nas principais fontes de emissão identificadas.

Perception-based painterly rendering: funcionality and interface design

Painterly rendering (non-photorealistic rendering or NPR) aims at translating photographs into paintings with discrete brush strokes, simulating certain techniques (im- or expressionism) and media (oil or watercolour). Recently, our research into visual perception and models of processes in the visual cortex resulted in a new rendering scheme, in which detected lines and edges at different scales are translated into brush strokes of different sizes. In order to prepare a version which is suitable for many users, including children, the design of the interface in terms of window and menu system is very important. Discussions with artists and non-artists led to three design criteria: (1) the interface must reflect the procedures and possibilities that real painters follow and use, (2) it must be based on only one window, and (3) the menu system must be very simple, avoiding a jungle of menus and sub-menus. This paper explains the interface that has been developed.

Production of laminar extrudates containing particles of a model drug processed by supercritical fluids

Tese de doutoramento, Farmácia (Tecnologia Farmacêutica), Universidade de Lisboa, Faculdade de Farmácia, 2015

Control of endosomal Toll-like receptor (TLR) signaling by nanoparticles and applications in cancer therapy

Thesis (Ph.D.)--University of Washington, 2014

Just noticeable differences in perceived image contrast with changes in displayed image size

An evaluation of the change in perceived image contrast with changes in displayed image size was carried out. This was achieved using data from four psychophysical investigations, which employed techniques to match the perceived contrast of displayed images of five different sizes. A total of twenty-four S-shape polynomial functions were created and applied to every original test image to produce images with different contrast levels. The objective contrast related to each function was evaluated from the gradient of the mid-section of the curve (gamma). The manipulation technique took into account published gamma differences that produced a just-noticeable-difference (JND) in perceived contrast. The filters were designed to achieve approximately half a JND, whilst keeping the mean image luminance unaltered. The processed images were then used as test series in a contrast matching experiment. Sixty-four natural scenes, with varying scene content acquired under various illumination conditions, were selected from a larger set captured for the purpose. Results showed that the degree of change in contrast between images of different sizes varied with scene content but was not as important as equivalent perceived changes in sharpness.

Occupational exposure to particulate matter and respiratory symptoms in Portuguese swine barn workers

Certain environmental conditions in animal and plant production have been associated with increased frequency in respiratory illnesses, including asthma, chronic bronchitis, and hypersensitivity pneumonitis, in farmers occupationally exposed in swine production. The aim of this study was to characterize particulate matter (PM) contamination in seven Portuguese swine farms and determine the existence of clinical symptoms associated with asthma and other allergy diseases, utilizing the European Community Respiratory Health Survey questionnaire. Environmental assessments were performed with portable direct-reading equipment, and PM contamination including five different sizes (PM0.5, PM1.0, PM2.5, PM5.0, PM10) was determined. The distribution of particle size showed the same trend in all swine farms, with high concentrations of particles with PM5 and PM10. Results from the questionnaire indicated a trend such that subjects with diagnosis of asthma were exposed to higher concentrations of PM with larger size (PM2.5, PM5, and PM10) while subjects with sneezing, runny nose, or stuffy nose without a cold or flu were exposed to higher concentrations of PM with smaller size (PM0.5 and PM1). Data indicate that inhalation of PM in swine farm workers is associated with increased frequency of respiratory illnesses.

Fungal contamination in two Portuguese wastewater treatment plants

The presence of filamentous fungi was detected in wastewater and air collected at wastewater treatment plants (WWTP) from several European countries. The aim of the present study was to assess fungal contamination in two WWTP operating in Lisbon. In addition, particulate matter (PM) contamination data was analyzed. To apply conventional methods, air samples from the two plants were collected through impaction using an air sampler with a velocity air rate of 140 L/min. Surfaces samples were collected by swabbing the surfaces of the same indoor sites. All collected samples were incubated at 27°C for 5 to 7 d. After lab processing and incubation of collected samples, quantitative and qualitative results were obtained with identification of the isolated fungal species. For molecular methods, air samples of 250 L were also collected using the impinger method at 300 L/min airflow rate. Samples were collected into 10 ml sterile phosphate-buffered saline with 0.05% Triton X-100, and the collection liquid was subsequently used for DNA extraction. Molecular identification of Aspergillus fumigatus and Stachybotrys chartarum was achieved by real-time polymerase chain reaction (RT-PCR) using the Rotor-Gene 6000 qPCR Detection System (Corbett). Assessment of PM was also conducted with portable direct-reading equipment (Lighthouse, model 3016 IAQ). Particles concentration measurement was performed at five different sizes: PM0.5, PM1, PM2.5, PM5, and PM10. Sixteen different fungal species were detected in indoor air in a total of 5400 isolates in both plants. Penicillium sp. was the most frequently isolated fungal genus (58.9%), followed by Aspergillus sp. (21.2%) and Acremonium sp. (8.2%), in the total underground area. In a partially underground plant, Penicillium sp. (39.5%) was also the most frequently isolated, also followed by Aspergillus sp. (38.7%) and Acremonium sp. (9.7%). Using RT-PCR, only A. fumigatus was detected in air samples collected, and only from partial underground plant. Stachybotrys chartarum was not detected in any of the samples analyzed. The distribution of particle sizes showed the same tendency in both plants; however, the partially underground plant presented higher levels of contamination, except for PM2.5. Fungal contamination assessment is crucial to evaluating the potential health risks to exposed workers in these settings. In order to achieve an evaluation of potential health risks to exposed workers, it is essential to combine conventional and molecular methods for fungal detection. Protective measures to minimize worker exposure to fungi need to be adopted since wastewater is the predominant internal fungal source in this setting.

Estudo da resistência e mecanismos de dano em juntas adesivas entre materiais compósitos com defeitos de adesão

A necessidade de utilizar métodos de ligação entre componentes de forma mais rápida, eficaz e com melhores resultados tem causado a crescente utilização das juntas adesivas, em detrimento dos métodos tradicionais de ligação. A utilização das juntas adesivas tem vindo a aumentar em diversas aplicações industriais por estas apresentarem vantagens, das quais se destacam a redução de peso, redução de concentrações de tensões e facilidade de fabrico. No entanto, uma das limitações das juntas adesivas é a dificuldade em prever a resistência da junta após fabrico e durante a sua vida útil devido à presença de defeitos no adesivo. Os defeitos são normalmente gerados pela preparação inadequada das juntas ou degradação do adesivo devido ao ambiente (por exemplo, humidade), reduzindo a qualidade da ligação e influenciando a resistência da junta. Neste trabalho é apresentado um estudo experimental e numérico de juntas de sobreposição simples (JSS) com a inclusão de defeitos centrados na camada de adesivo para comprimentos de sobreposição (LO) diferentes. Os adesivos utilizados foram o Araldite® AV138, apresentado como sendo frágil, e o adesivo Sikaforce® 7752, intitulado como adesivo dúctil. A parte experimental consistiu no ensaio à tração das diferentes JSS permitindo a obtenção das curvas força-deslocamento (P-δ). A análise numérica por modelos de dano coesivo (MDC) foi realizada para analisar as tensões de arrancamento ((σy) e as tensões de corte (τxy) na camada adesiva, para estudar a variável de dano do MDC durante o processo de rotura e para avaliar a capacidade dos MDC na previsão da resistência da junta. Constatou-se um efeito significativo dos defeitos de diferentes dimensões na resistência das juntas, que também depende do tipo de adesivo utilizado e do valor de LO. Os modelos numéricos permitiram a descrição detalhada do comportamento das juntas e previsão de resistência, embora para o adesivo dúctil a utilização de uma lei coesiva triangular tenha provocado alguma discrepância relativamente aos resultados experimentais.

Transcatheter aortic valve implantation (TAVI): state of the art techniques and future perspectives.

Transcatheter aortic valve therapies are the newest established techniques for the treatment of high risk patients affected by severe symptomatic aortic valve stenosis. The transapical approach requires a left anterolateral mini-thoracotomy, whereas the transfemoral method requires an adequate peripheral vascular access and can be performed fully percutaneously. Alternatively, the trans-subclavian access has been recently proposed as a third promising approach. Depending on the technique, the fine stent-valve positioning can be performed with or without contrast injections. The transapical echo-guided stent-valve implantation without angiography (the Lausanne technique) relies entirely on transoesophageal echocardiogramme imaging for the fine stent-valve positioning and it has been proved that this technique prevents the onset of postoperative contrast-related acute kidney failure. Recent published reports have shown good hospital outcomes and short-term results after transcatheter aortic valve implantation, but there are no proven advantages in using the transfemoral or the transapical technique. In particular, the transapical series have a higher mean logistic Euroscore of 27-35%, a procedural success rate above 95% and a mean 30-day mortality between 7.5 and 17.5%, whereas the transfemoral results show a lower logistic Euroscore of 23-25.5%, a procedural success rate above 90% and a 30-day mortality of 7-10.8%. Nevertheless, further clinical trials and long-term results are mandatory to confirm this positive trend. Future perspectives in transcatheter aortic valve therapies would be the development of intravascular devices for the ablation of the diseased valve leaflets and the launch of new stent-valves with improved haemodynamic, different sizes and smaller delivery systems.

Rôle du cortex pariétal postérieur dans le processus d'intégration visuomotrice - connexions anatomiques avec le cortex moteur et activité cellulaire lors de la locomotion chez le chat

La progression d’un individu au travers d’un environnement diversifié dépend des informations visuelles qui lui permettent d’évaluer la taille, la forme ou même la distance et le temps de contact avec les obstacles dans son chemin. Il peut ainsi planifier en avance les modifications nécessaires de son patron locomoteur afin d’éviter ou enjamber ces entraves. Ce concept est aussi applicable lorsque le sujet doit atteindre une cible, comme un prédateur tentant d’attraper sa proie en pleine course. Les structures neurales impliquées dans la genèse des modifications volontaires de mouvements locomoteurs ont été largement étudiées, mais relativement peu d’information est présentement disponible sur les processus intégrant l’information visuelle afin de planifier ces mouvements. De nombreux travaux chez le primate suggèrent que le cortex pariétal postérieur (CPP) semble jouer un rôle important dans la préparation et l’exécution de mouvements d’atteinte visuellement guidés. Dans cette thèse, nous avons investigué la proposition que le CPP participe similairement dans la planification et le contrôle de la locomotion sous guidage visuel chez le chat. Dans notre première étude, nous avons examiné l’étendue des connexions cortico-corticales entre le CPP et les aires motrices plus frontales, particulièrement le cortex moteur, à l’aide d’injections de traceurs fluorescents rétrogrades. Nous avons cartographié la surface du cortex moteur de chats anesthésiés afin d’identifier les représentations somatotopiques distales et proximales du membre antérieur dans la partie rostrale du cortex moteur, la représentation du membre antérieur située dans la partie caudale de l’aire motrice, et enfin la représentation du membre postérieur. L’injection de différents traceurs rétrogrades dans deux régions motrices sélectionnées par chat nous a permis de visualiser la densité des projections divergentes et convergentes pariétales, dirigées vers ces sites moteurs. Notre analyse a révélé une organisation topographique distincte de connexions du CPP avec toutes les régions motrices identifiées. En particulier, nous avons noté que la représentation caudale du membre antérieur reçoit majoritairement des projections du côté rostral du sillon pariétal, tandis que la partie caudale du CPP projette fortement vers la représentation rostrale du membre antérieur. Cette dernière observation est particulièrement intéressante, parce que le côté caudal du sillon pariétal reçoit de nombreux inputs visuels et sa cible principale, la région motrice rostrale, est bien connue pour être impliquée dans les fonctions motrices volontaires. Ainsi, cette étude anatomique suggère que le CPP, au travers de connexions étendues avec les différentes régions somatotopiques du cortex moteur, pourrait participer à l’élaboration d’un substrat neural idéal pour des processus tels que la coordination inter-membre, intra-membre et aussi la modulation de mouvements volontaires sous guidage visuel. Notre deuxième étude a testé l’hypothèse que le CPP participe dans la modulation et la planification de la locomotion visuellement guidée chez le chat. En nous référant à la cartographie corticale obtenue dans nos travaux anatomiques, nous avons enregistré l’activité de neurones pariétaux, situés dans les portions des aires 5a et 5b qui ont de fortes connexions avec les régions motrices impliquées dans les mouvements de la patte antérieure. Ces enregistrements ont été effectués pendant une tâche de locomotion qui requiert l’enjambement d’obstacles de différentes tailles. En dissociant la vitesse des obstacles de celle du tapis sur lequel le chat marche, notre protocole expérimental nous a aussi permit de mettre plus d’emphase sur l’importance de l’information visuelle et de la séparer de l’influx proprioceptif généré pendant la locomotion. Nos enregistrements ont révélé deux groupes de cellules pariétales activées en relation avec l’enjambement de l’obstacle: une population, principalement située dans l’aire 5a, qui décharge seulement pendant le passage du membre au dessus del’entrave (cellules spécifiques au mouvement) et une autre, surtout localisée dans l’aire 5b, qui est activée au moins un cycle de marche avant l’enjambement (cellules anticipatrices). De plus, nous avons observé que l’activité de ces groupes neuronaux, particulièrement les cellules anticipatrices, était amplifiée lorsque la vitesse des obstacles était dissociée de celle du tapis roulant, démontrant l’importance grandissante de la vision lorsque la tâche devient plus difficile. Enfin, un grand nombre des cellules activées spécifiquement pendant l’enjambement démontraient une corrélation soutenue de leur activité avec le membre controlatéral, même s’il ne menait pas dans le mouvement (cellules unilatérales). Inversement, nous avons noté que la majorité des cellules anticipatrices avaient plutôt tendance à maintenir leur décharge en phase avec l’activité musculaire du premier membre à enjamber l’obstacle, indépendamment de sa position par rapport au site d’enregistrement (cellules bilatérales). Nous suggérons que cette disparité additionnelle démontre une fonction diversifiée de l’activité du CPP. Par exemple, les cellules unilatérales pourraient moduler le mouvement du membre controlatéral au-dessus de l’obstacle, qu’il mène ou suive dans l’ordre d’enjambement, tandis que les neurones bilatéraux sembleraient plutôt spécifier le type de mouvement volontaire requis pour éviter l’entrave. Ensembles, nos observations indiquent que le CPP a le potentiel de moduler l’activité des centres moteurs au travers de réseaux corticaux étendus et contribue à différents aspects de la locomotion sous guidage visuel, notamment l’initiation et l’ajustement de mouvements volontaires des membres antérieurs, mais aussi la planification de ces actions afin d’adapter la progression de l’individu au travers d’un environnement complexe.