Caracterização química de extratos de Hibiscus tiliaceus : estudo comparativo de métodos de extração

O presente trabalho teve como objetivo estudar a composição química das flores de Hibiscus tiliaceus L usando diferentes técnicas de extração. Os métodos de extração usados foram maceração, Soxhlet, ultra-som, extração com fluido supercrítico e extração com líquido pressurizado. Foram investigadas as variáveis que podem influenciar no processo de extração tais como temperatura, pressão, polaridade do solvente, tempo de extração e massa de amostra, entre outras. A identificação dos compostos foi realizada por cromatografia gasosa acoplada com detector de espectrometria de massas. Os métodos de extração utilizados mostraram-se eficientes para a obtenção dos extratos, com algumas diferenças qualitativas. Quantitativamente, os compostos majoritários, em todas as técnicas de extração usadas, foram ácidos carboxílicos (C16 e C18), hidrocarbonetos com número ímpar de carbonos (C27, C29 e C31) e fitosteróis. Entre os métodos de extração que utilizam solventes orgânicos, a extração com líquido pressurizado apresentou maior rendimento em massa de extrato e maior concentração de alguns dos compostos presentes nas flores de Hibiscus tiliaceus L., com as vantagens de redução de solventes e do tempo de extração. A variável que se mostrou mais importante nos procedimentos de extração foi a polaridade do solvente. A composição química das flores Hibiscus tiliaceus L apresentou além dos compostos citados, álcoois, aldeídos e vitamina E. A determinação do potencial antioxidante da planta, utilizando o método por quimiluminescência, permitiu encontrar valores para TAR e TRAP superiores ao trolox, utilizado como padrão, indicando a presença de antioxidantes nos extratos.

Biorremediação, toxicidade e lesão celular em derrames de gasolina

O presente trabalho abrange um estudo integrado que busca as relações existentes entre processos de biorremediação de solos e alterações das condições fisiológicas dos organismos que habitam os locais contaminados. Nos estudos envolvendo biorremediação, analisou-se como um derrame de gasolina, simulado através de ensaios de laboratório em microcosmos, altera a microbiota do solo e a dinâmica dos contaminantes ao longo do tempo. Para tanto, avaliou-se a população microbiana (através de métodos de contagem direta e métodos qualitativos com lâmina enterrada, e identificação dos microrganismos), o nitrogênio mineral, o pH e a condutividade elétrica do solo, evolução de CO2, cromatografia gasosa, além de ensaios de permeabilidade, pluviometria e agregação de partículas do solo. Observou-se que materiais orgânicos melhoram as características gerais dos solos ao final dos tratamentos, e ao mesmo tempo retém o contaminante – no caso gasolina – por um maior período de tempo. Existe uma evidente influência dos microrganismos nos processos de biorremediação de gasolina e do diesel analisados, comprovada através de cromatografia gasosa. Através de testes em modelo animal, analisados através de parâmetros sangüíneos, histologia, pH e condutividade elétrica de macerados de órgãos, observou-se alterações importantes no metabolismo dos animais e, em especial, identificou-se um novo teste – baseado na variação de condutividade elétrica – que pode auxiliar na análise fisiopatológica de órgãos com supostas lesões. Uma integração entre as áreas de Engenharia Geotécnica, Agronomia, Medicina, Biologia, Farmácia e Bioquímica foi obtida, provando a necessidade de projetos multidisciplinares no futuro da pesquisa.

Estudo do efeito da remoção de graxa nas propriedades das juntas homocinéticas de poliéter-éster

Nesta dissertação, foi estudado o processo de remoção de graxa lubrificante, que estava untada em mangas das juntas homocinéticas de poliéteréster (Hytrel e Arnitel) com solventes. A proposta seria remover esta graxa com solventes e reutilizar as mangas novamente nas juntas homocinéticas, para diminuir o impacto ambiental. Para a limpeza das mangas, os solventes deveriam atender às exigências de máxima capacidade de remoção da graxa, mínima agressão às mangas e compatibilidade com as normas ambientais vigentes. Inicialmente, para a caracterização dos polímeros foram utilizadas as técnicas de análise térmica (TGA, DSC e DMA), e espectroscopia no infravermelho (IR); para os solventes foi utilizada a cromatografia gasosa acoplada à espectrometria de massa (CG/MSD), e para as graxas, o IR. A partir dos ensaios de inchamento dos solventes nos polímeros foram selecionados os três solventes (Solbrax-Eco 145/210, Siderclean 53 e Renotest LM) nos quais as graxas apresentavam maior solubilidade. Numa segunda etapa, estudaram-se as condições nas quais os solventes alterariam as propriedades dos polímeros através dos ensaios térmicos (TGA, DSC e DMA) e mecânicos (ensaio de tração e dureza). A partir do DSC obteve-se a Tm, Tc e o percentual de cristalinidade dos polímeros puros e dos polímeros imersos nos três solventes. Através do DMA, obteve-se o módulo de armazenamento (E’), módulo de perda (E”) e a tangente de perda (tan d) dos polímeros puros e dos polímeros imersos nos solventes (2, 5 e 9 dias). Baseado nos ensaios de tração dos polímeros puros e imersos nos solventes, estudou-se a tensão e o alongamento na ruptura, o módulo de elasticidade, e a força máxima até a ruptura. Concluiu-se, a partir dos ensaios térmicos, que os solventes atuam como plastificantes nos polímeros, alterando fortemente o seu comportamento térmico, dinâmico-mecânica e mecânico. À medida que o tempo de imersão dos polímeros nos solventes aumenta, uma maior quantidade de solvente é incorporada nos polímeros e a região da temperatura de transição vítrea e a tan d das amostras deslocam-se progressivamente para temperaturas mais baixas. Foi igualmente observada uma diminuição do módulo de elasticidade dos polímeros após a imersão nos solventes.

Produção de monoglicéridos através de catalisadores de argila

As reações de esterificação do glicerol com ésteres de ácidos gordos, na presença de catalisador originam monoglicéridos que possuem inúmeras aplicações em diversas indústrias e são emulsionantes e antibacterianos. Para a produção dos monoglicéridos, nomeadamente a monolaurina, recorreu-se à utilização de catalisadores heterogéneos de características básicas, após modificação de uma bentonita recolhida na Serra de Dentro (SD), Ilha do Porto Santo e de uma argila comercial, a K10. Estas argilas foram modificadas recorrendo a uma solução de hidróxido de lítio, e posteriormente calcinadas a diferentes temperaturas, 350, 450, 550 e 650ºC. Todas as argilas foram posteriormente caracterizadas recorrendo à difração de raios X, aos indicadores de Hammett, à titulação potenciométrica e à espectroscopia de infravermelho que confirmaram o carácter básico dos materiais produzidos. Os produtos de reação foram analisados e quantificados por cromatografia gasosa. A caracterização dos catalisadores demonstra que temperaturas de calcinação superiores a 450ºC provocam uma diminuição da força da base devido à excessiva perda de água resultante da calcinação. A produção de monolaurina é maior quando ocorre a reação do glicerol com o laurato de metilo na presença de argilas baseadas na SD, em particular o material calcinado a 450ºC como catalisador (rendimento em monolaurina de 43%). Não se detetaram outros produtos reacionais, mas a sua formação não é de excluir. Para a minimização da produção potencial de subprodutos, testou-se, também, uma reação de acetalização do glicerol com acetona originando o composto solketal. Os resultados desta reação, apesar de indiciarem uma elevada seletividade para o produto pretendido, não foram elucidativos em termos de ordenamento dos catalisadores em termos de atividade catalítica. Posteriormente fez-se uma tentativa de reação do solketal com o laurato de metilo na presença de catalisador heterogéneo básico de argila, não se tendo observado atividade catalítica.

Análises Estruturais e atividades biológicas de exopolissacarídeo extraído do fungo comestível pleurotus Sajor-Caju e de seu derivado sulfatado quimicamente.

The exopolysaccharides are extracellular compounds produced by some species of fungi and bacteria. It is suggested that these molecules, even when in the form of complex polysaccharide-peptide, are the main bioactive molecules of many fungus. Some of the biological activities displayed by these compounds can be accentuated and others may arise when you add chemically polar or nonpolar groups to polysaccharides. The fruiting body of Pleurotus sajor-caju produces a heteropolysaccharide with antineoplastic and antimicrobial activity, but other biological activities of this polymer have not been evaluated. In this work the exopolysaccharide of Pleurotus sajor-caju was sulfated chemically and structurally characterized. We also evaluated the antiproliferative, antioxidant and anticoagulant activities from native exopolysaccharide (PN) and its sulfated derivated (PS). Polyacrylamide gel electrophoresis, infrared spectroscopy and nuclear magnetic resonance (¹³C) proved successful in sulfation of PN to obtain PS. Analysis by gas chromatography-mass spectroscopy showed that PN and PS are composed of mannose, galactose, 3-O-methyl-galactose and glucose in proportion percentage of 44,9:16,3:19,8:19 and 49, 7:14,4:17,7:18,2, respectively. The percentage of sulfate found in PS was 22.5%. Antioxidants assays revealed that the sulfation procedure affects differently the activities of exopolysaccharides, while the total antioxidant capacity, the scavenging activity of superoxide radical and ferric chelating were not affected by sulfation, on the other hand the chemical modification of PN enhanced the scavenging activity of hydroxyl radical and reducing power. PS also showed anticoagulant activity in a dose-dependent manner and clotting time was 3.0 times higher than the baseline value in APTT at 2 mg/mL. The exopolysaccharide not presented antiproliferative activity against HeLa tumor cells, but PS affects the cellular proliferation in a time-dependent manner. After 72 h, the inhibition rate of PS (2.0 mg/mL) on HeLa cells was about 60%. The results showed that PN sulfation increase some of their activities.

Hidrocarbonetos alifáticos em sedimentos de fundo do estuário do Rio Potengi, grande Natal (RN): implicações ambientais

The Potengi river estuary is located in the region of Natal (RN, Brazil), comprising a population of approximately 1,000,000 inhabitants. Besides the dominant urban presence, the estuary has fragments of mangrove forest. The objective of this study is to determine the aliphatic hydrocarbons found in the bottom sediments of this estuary, identifying their levels, distribution and their possible origins through the diagnostic rates, indexes and results comparisons with the local anthropic and natural characteristics. The samples were obtained according to a plan that allowed sampling of the estuary up to 12 km upstream from it as mounth. 36 stations were selected, grouped into 12 cross sections through the course of the river and spaced on average by 1 km. Each section consisted of three stations: the right margin, the deepest point and the left margin. The hydrocarbon n-alkanes from C10 to C36, the isoprenoids pristane and phytane, the unresolved complex mixture (UCM) and the total resolved hydrocarbons were analyzed by gas chromatography. N-alkanes, pristane, phytane and UCM were detected only at some stations. In the other, the concentration was below the detection limit defined by the analytical method (0.1 mg / kg), preventing them from being analyzed to determine the origin of the material found. By using different parameters, the results show that the estuary receives both the input of petrogenic hydrocarbons, but also of biogenic hydrocarbons, featuring a mixture of sources and relatively impacted portions. Based on the characteristics and activities found in the region, it is possible to affirm that petrogenic sources related to oil products enter the estuary via urban runoff or boats traffic, boat washing and fueling. Turning to the biogenic source, the predominant origin was terrestrial, characterized by vascular plants, indicating contribution of mangrove vegetation. It was evident the presence of, at specific points in the estuary, hydrocarbon pollution, and, therefore is recommended the adoption of actions aimed at interrupting or, at least, mitigating the sources potentially capable of damp petrogenic hydrocarbons in the estuary studied.

Tratamento eletroquímico de efluente proveniente de caixas separadoras de água e óleo de postos revendedores de combustíveis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Ruminal methane emission by dairy cattle in Southeast Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção de biodiesel a partir de óleo de coco (Cocos nucifera L

The production of biodiesel has become an important and attractive process for the production of alternative fuels. This work presents a study of the biodiesel production from coconut oil (Cocos nucifera L.), by two routes: direct transesterification using NaOH as catalyst and esterification (with H2SO4) followed by basic transesterification. The reactor was built in pirex with 1L of capacity and was equipped with a jacket coupled with a thermostatic bath to temperature control, a mecanical stirring is also present in the reactor. The analysis of oil composition was carried out by gas chromatography and esters compounds were identified. The parameters of molar ratio oil/alcohol, reaction time and temperature were studied and their influence on the conversion products was evaluated using experimental planning (23). The molar ratio was the most significant variable by the statistical planning analysis. Conversions up to 85.3% where achived in the esterification/transesterification, with molar ratio 1:6 at 60ºC and 90 minutes of reaction. For the direct transesterification, route conversions up 87.4% eas obtained using 1:6.5 molar ratio at 80ºC and 60 minutes of reaction. The Coconut oil was characterized by their physic chemical properties and key constituents of the oil. The lauric acid was the main constituint and the oil showed high acidity. The biodiesel produced was characterized by its main physicochemical properties, indicating satisfactory results when compared to standard values of National Petroleum Agency. The work was supplemented with a preliminary assessment of the reaction kinetic

Avaliação da eficiência de catalisadores comerciais na obtenção de biodiesel de algodão (Gossipium hisutum L.)

The increasing demand for energy and the environment consequences derived from the use of fossil energy, beyond the future scarcity of the oil that currently is the main power plant of the world, it stimulated the research around the production of biodiesel. In this work the synthesis of biodiesel of cotton in the methyl route was carried through, for had been in such a way used catalyst commercial homogeneous, Na-Methylat and the K-Methylat, aiming to the evaluation of the efficiency of them. An experimental planning 23 was elaborated aiming to evaluate the influence of the variable (molar reason oil/alcohol, % of catalyst and temperature) in the process as well as indicating the excellent point of operation in each case. The biodiesel was analyzed by gaseous chromatography, indicating a conversion of 96,79% when used Na-Methylat® as catalytic, and 95,65% when the K-Methylat® was used. Optimum result found with regard to the conversion was obtained at the following conditions: molar reason oil/alcohol (1:8), temperature of 40°C and 1% of catalyst Na-Methylat, reaching a 96,79% conversion, being, therefore, above of the established for the European norm (96.5%). The analysis of regression showed that the only significant effect for a confidence level of 95%, was of the changeable temperature. The variance analysis evidenced that the considered model is fitted quite to the experimental response, being statistically significant; however it does not serve inside for make forecasts of the intervals established for each variable. The best samples were analyzed by infra-red (IR) that identified the strong bands of axial deformation C=O of methylic ester, characterized through analyses physicochemical that had indicated conformity with the norms of the ANP, that with the thermal and rheological analyses had together evidenced that biodiesel can be used as combustible alternative in substitution to diesel

Estudo da remoção de compostos orgânicos, benzeno e tolueno, em solução aquosa por processo oxidativo avançado do tipo Fenton

The oil and petrochemical industry is responsable to generate a large amount of waste and wastewater. Among some efluents, is possible find the benzene, toluene, ethilbenze and isomers of xilenes compounds, known as BTEX. These compounds are very volatily, toxic for environment and potencially cancerigenous in man. Oxidative advanced processes, OAP, are unconventional waste treatment, wich may be apply on treatment and remotion this compounds. Fenton is a type of OAPs, wich uses the Fenton s reactant, hydrogen peroxide and ferrous salt, to promove the organic degradation. While the Photo-Fenton type uses the Fenton s reactant plus UV radiation (ultraviolet). These two types of OAP, according to literature, may be apply on BTEX complex system. This project consists on the consideration of the utilization of technologies Fenton and Photo-Fenton in aqueous solution in concentration of 100 ppm of BTEX, each, on simulation of condition near of petrochemical effluents. Different reactors were used for each type of OAP. For the analyticals results of amount of remotion were used the SPME technique (solid phase microextraction) for extraction in gaseous phase of these analytes and the gas chromatography/mass espectrometry The arrangement mechanical of Photo-Fenton system has been shown big loss by volatilization of these compounds. The Fenton system has been shown capable of degradate benzene and toluene compounds, with massic percentage of remotion near the 99%.

Desenvolvimento de uma unidade laboratorial para quantificação de BTX como poluentes atmosféricos, usando microextração em fase sólida

This dissertation aims the development of an experimental device to determine quantitatively the content of benzene, toluene and xylenes (BTX) in the atmosphere. BTX are extremely volatile solvents, and therefore play an important role in atmospheric chemistry, being precursors in the tropospheric ozone formation. In this work a BTX new standard gas was produced in nitrogen for stagnant systems. The aim of this dissertation is to develop a new method, simple and cheaper, to quantify and monitor BTX in air using solid phase microextraction/ gas chromatography/mass spectrometry (SPME/CG/MS). The features of the calibration method proposed are presented in this dissertation. SPME sampling was carried out under non-equilibrium conditions using a Carboxen/PDMS fiber exposed for 10 min standard gas mixtures. It is observed that the main parameters that affect the extraction process are sampling time and concentration. The results of the BTX multicomponent system studied have shown a linear and a nonlinear range. In the non-linear range, it is remarkable the effect of competition by selective adsorption with the following affinity order p-xylene > toluene > benzene. This behavior represents a limitation of the method, however being in accordance with the literature. Furthermore, this behavior does not prevent the application of the technique out of the non-linear region to quantify the BTX contents in the atmosphere.

Extração supercrítica do óleo de linhaça: construção do extrator, estudo de parâmetros de processo, avaliação química e antioxidante do produto

The aim of the present study was to extract vegetable oil from brown linseed (Linum usitatissimum L.), determine fatty acid levels, the antioxidant capacity of the extracted oil and perform a rapid economic assessment of the SFE process in the manufacture of oil. The experiments were conducted in a test bench extractor capable of operating with carbon dioxide and co-solvents, obeying 23 factorial planning with central point in triplicate, and having process yield as response variable and pressure, temperature and percentage of cosolvent as independent variables. The yield (mass of extracted oil/mass of raw material used) ranged from 2.2% to 28.8%, with the best results obtained at 250 bar and 50ºC, using 5% (v/v) ethanol co-solvent. The influence of the variables on extraction kinetics and on the composition of the linseed oil obtained was investigated. The extraction kinetic curves obtained were based on different mathematical models available in the literature. The Martínez et al. (2003) model and the Simple Single Plate (SSP) model discussed by Gaspar et al. (2003) represented the experimental data with the lowest mean square errors (MSE). A manufacturing cost of US$17.85/kgoil was estimated for the production of linseed oil using TECANALYSIS software and the Rosa and Meireles method (2005). To establish comparisons with SFE, conventional extraction tests were conducted with a Soxhlet device using petroleum ether. These tests obtained mean yields of 35.2% for an extraction time of 5h. All the oil samples were sterilized and characterized in terms of their composition in fatty acids (FA) using gas chromatography. The main fatty acids detected were: palmitic (C16:0), stearic (C18:0), oleic (C18:1), linoleic (C18:2n-6) and α-linolenic (C18:3n-3). The FA contents obtained with Soxhlet dif ered from those obtained with SFE, with higher percentages of saturated and monounsaturated FA with the Soxhlet technique using petroleum ether. With respect to α-linolenic content (main component of linseed oil) in the samples, SFE performed better than Soxhlet extraction, obtaining percentages between 51.18% and 52.71%, whereas with Soxhlet extraction it was 47.84%. The antioxidant activity of the oil was assessed in the β-carotene/linoleic acid system. The percentages of inhibition of the oxidative process reached 22.11% for the SFE oil, but only 6.09% for commercial oil (cold pressing), suggesting that the SFE technique better preserves the phenolic compounds present in the seed, which are likely responsible for the antioxidant nature of the oil. In vitro tests with the sample displaying the best antioxidant response were conducted in rat liver homogenate to investigate the inhibition of spontaneous lipid peroxidation or autooxidation of biological tissue. Linseed oil proved to be more efficient than fish oil (used as standard) in decreasing lipid peroxidation in the liver tissue of Wistar rats, yielding similar results to those obtained with the use of BHT (synthetic antioxidant). Inhibitory capacity may be explained by the presence of phenolic compounds with antioxidant activity in the linseed oil. The results obtained indicate the need for more detailed studies, given the importance of linseed oil as one of the greatest sources of ω3 among vegetable oils

Volatile compounds from organic and conventional passion fruit (Passiflora edulis F. Flavicarpa) pulp

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Migration of diethylhexyl phthalate from PVC bags into intravenous cyclosporine solutions

The migration of diethylhexyl phthalate (DEHP) from PVC bags into LVPS (0.9% NaCl) and LVPS with cyclosporine at concentrations of 2.5 and 0.5 mg/ml was studied. PVC bags were placed in contact with these solutions and stored at 25 1 degrees C. They were taken for analysis each 30 min during 6 h and after this period at each 1 h until 12 h of contact. Water was used as reference, and exposed and analyzed under the same conditions. After contact, the solutions were submitted to extraction with hexane and analyzed by GC-FID. The results showed that DEHP did not migrate into water and LVPS during all the time. Also, no measurable amount of DEHP was detected during the first 3 h of contact between the PVC bag and the diluted cyclosporine solution. However, the amount of released DEHP reached a detectable level after 4 It of contact, increased until 6 h, stabilized, and increased again after 9-10 h. The 12 h of contact showed the highest DEHP levels for both cyclosporine concentrations. The DEHP migrated was 0.02-0.08% of that present in the bag. (c) 2005 Elsevier B.V. All rights reserved.