CRYOPRESERVATION of RED BROCKET DEER SEMEN (MAZAMA AMERICANA): COMPARISON BETWEEN THREE EXTENDERS

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Studies on the cooling minimum quantity and conventional cooling at hardened steels in grinding process

The purpose of this work is to explain the concept of cutting fluids reasonable usage through the fluid minimum quantity in grinding processes. on that purpose, the development of a new nozzle and an own and adequate methodology should be required in order to obtain good results and compare them to the conventional methods. The analysis of the grinding wheel/cutting fluid performance was accomplished from the following input parameters: flow rate variation by nozzle diameter changes (three diameters values: 3mm, 4mm and 5mm), besides the conventional round nozzle already within the machine. Integral oil and a synthetic emulsion were used as cutting fluids and a conventional grinding wheel was employed. The workpieces were made of steel VC 131, tempered and quenched with 60HRc. Thus, as the flow rate and the nozzle diameter changes, keeping steady fluid jet velocity (equal to cutting velocity), attempted to find the best machining conditions, with the purpose to obtain a decrease on the cutting fluid volume, taking into consideration the analysis of the process output variables such as cutting strength, cutting specific energy, grinding wheel wear and surface roughness. It was verified that the 3mm diameter optimized nozzle and the integral oil, in general, was the best combination among all proposed.

Analysis of the Influence of Sparkout Time on Grinding Using Several Lubrication/Cooling Methods

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A sustainable alternative for cooling the machining processes using a refrigerant fluid in recirculation inside the toolholder

This article presents a cooling system for cutting tool in turning based in a toolholder with cooling fluid flowing inside its body being that this fluid must necessarily be able to phase change due to heat generated from machining processes. In this way, the fluid evaporates just under the cutting tool allowing a heat transfer more efficient than if were used a fluid without phase change once the latent heat of evaporation is beneficial for removal heat. Following, the cooling fluid evaporated passes through a condenser located out of the toolholder where it is condensated and returns to the toolholder again and a new cycle is started. In this study, the R-123, a hydrochlorofluorocarbon (HCFC) fluid, was selected for the turning of a Cr-Ni-Nb-Mn-N austenitic steel of hard machinability. The machining tests were carried out under three different machining conditions: dry machining, external cutting fluid (conventional method), and with the toolholder proposed. As result, the developed system allows a surface roughness up to 10% better than dry machining and a tool life close to the conventional method, but 32% superior to dry machining; moreover, there are environmental and economics advantages once the cooling fluid is maintained in a loop circuit.

Superconductors of the BPSCCO system obtained from rapid cooling process

Bi-based (BPSCCO) superconductors have been extensively studied due to their interesting superconducting properties, especially those that present high transition temperature (T-c). In this work, superconductors of the BPSCCO system were prepared from rapid cooling process and studied under its structural and magnetic properties. Sample as-prepared shows an amorphous behavior, which is converted progressively into 2223 phase. This process permits the control of Pb or Bi loss and the crystallization of the desired phase using several heat annealing processes. The 2201 and 2212 phases were also observed as intermediate phases, before the crystallization of the 2223 phase. The superconductor obtained in this work presented a T-c around 77-K. (C) 2005 Springer Science + Business Media, Inc.

Semen parameters, fertility and testosterone levels in male rats exposed prenatally to betamethasone

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Correlation between semen analysis by motile sperm organelle morphology examination and sperm DNA damage

Regression analysis of 538 semen samples demonstrated that percentages of normal nuclear sperm and all spermatozoa with abnormalities of nuclear form at high magnification had significant negative correlation with percentages of DNA fragmentation. on the other hand, there was a positive correlation between percentages of spermatozoa with nuclear vacuoles and those with DNA fragmentation. (Fertil Steril (R) 2010;94:1937-40. (C) 2010 by American Society for Reproductive Medicine.)

Cold Renal Ischemia: Comparison of Efficacy Between Two Techniques of Cooling, in a Swine Model

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A polymerase chain reaction for the detection of Brucella canis in semen of naturally infected dogs

The objective was to evaluate a PCR assay for the detection of Brucella canis in canine semen, comparing its performance with that of bacterial isolation, serological tests and PCR assay of blood. Fifty-two male dogs were examined clinically to detect reproductive abnormalities and their serum was tested by the rapid slide agglutination test, with and without 2-mercaptoethanol (2ME-RSAT and RSAT, respectively). In addition, microbiological culture and PCR assays were performed on blood and semen samples. The findings of the semen PCR were compared (Kappa coefficient and McNemar test) to those of blood PCR, culture of blood and semen, RSAT, and 2ME-RSAT. Nucleic acid extracts from semen collected from dogs not infected with B. canis were spiked with decreasing amounts of B. canis RM6/66 DNA and the resulting samples subjected to PCR. In addition, semen samples of non-infected dogs were spiked with decreasing amounts of B. canis CFU and the resulting suspensions were used for DNA extraction and amplification. of the 52 dogs that were examined, the following tests were positive: RSAT, 16 (30.7%); 2ME-RSAT, 5 (9.6%); blood culture, 14 (26.9%); semen culture, 11 (21.1%); blood PCR, 18 (34.6%); semen PCR, 18 (34.6%). The PCR assay detected as few as 3.8 fg of B. canis DNA experimentally diluted in 444.9 ng of canine DNA (extracted from semen samples of noninfected dogs). In addition, the PCR assay amplified B. canis genetic sequences from semen samples containing as little as 1.0 x 10(0) cfu/mL. We concluded that PCR assay of semen was a good candidate as a confirmatory test for the diagnosis of brucellosis in dogs; its diagnostic performance was similar to blood culture or blood PCR. Furthermore, the PCR assay of semen was more sensitive than the 2ME-RSAT or semen culture. Examination of semen by PCR should be included for diagnosis of brucellosis prior to natural mating or AI; in that regard, some dogs that were negative on serological and microbiological examinations as well as blood PCR were positive on PCR of semen. (c) 2007 Elsevier B.V. All rights reserved.

Adaptation and evaluation of polymerase chain reaction for Brucella ovis detection in semen, urine and organs of rams experimentally infected

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Replacing egg yolk with soybean lecithin in the cryopreservation of stallion semen

The objective of this study was to determine whether replacing the egg yolk with soybean lecithin in the Botu-Crio (R) cryodiluent would maintain the fertility of cryopreserved stallion sperm. Two experiments were performed to evaluate cell freezability. In experiment 1, sperm from 15 stallions were frozen in Botu-Crio (R) (BC) or Botu-Crio (R) which contained 45 g/L soybean lecithin (BCLS45) in place of the egg yolk. In experiment 2, we compared different concentrations of soybean lecithin: 0, 10.0, 12.5, 15.0, 17.5 and 20.0 g/L (BC, BCLS10, BCLS12.5, BCLS17.5 and BCLS20, respectively). In experiment 1, sperm frozen in BC and BCLS45 exhibited similar (P > 0.05) percentages of total motile sperm (61% and 61%, respectively); progressively motile sperm (27% and 27%, respectively) and sperm with intact plasma membranes (IMP; 53% and 57%, respectively). Similarly, sperm frozen in BC or BC containing any concentration of soybean lecithin maintained similar (P > 0.05) percentages of total motile sperm (61-68%) and progressively motile sperm (27-31%). In the first fertility trial, we used cryopreserved semen from a single stallion was inseminated into mares. The semen from the sperm that were frozen in BC diluent resulted in a higher fertility rate (66%, 16/24) compared to the sperm that were frozen in BCLS45 diluent (17%, 5/29; P < 0.01). Similarly, in a second fertility trial, the mares that were inseminated with the sperm that were frozen in BC diluent exhibited a higher fertility rate (66%, 16/24) compared to the mares that were inseminated with the sperm that were frozen in BCLS20 (40%, 10/25; Pc 0.05). Finally, in a third trial, the sperm that were frozen in BC resulted in a higher fertility rate in mares (75%, 18/24) compared to the sperm that were frozen in BCLS10 (41%, 10/24; P < 0.05). Although replacing the egg yolk in the BC cryodiluent with soybean lecithin provided similar laboratory results for stallion sperm, after cryopreservation, the sperm that was frozen with soybean lecithin in the diluent correlated with lower fertility rates. Based on these results, we concluded that the use of BCLS can be used as an alternative diluent for cryopreserving stallion sperm. However, the resulting reduced fertility rate is a matter of concern. Further studies are necessary to clarify the reasons for this decrease in fertility and to determine the optimal lecithin concentration for diluents to freeze stallion sperm. (C) 2011 Elsevier B.V. All rights reserved.

Characteristics of seminal plasma proteins and their correlation with canine semen analysis

The objectives were to separate canine seminal plasma proteins (with SDS-PAGE) and to determine the correlation between specific proteins and semen characteristics. Three ejaculates from 20 mixed-breed dogs, of unknown fertility, were collected by digital manipulation. Ejaculate volume and color, sperm motility, sperm vigor, percentage of morphologically normal spermatozoa, and membrane integrity (hypoosmotic swelling test and fluorescent staining) were assessed. For each dog, seminal plasma was pooled from all three ejaculates and proteins were separated with SDS-PAGE, using polyacrylamide concentrations of 13% and 22% in the separation gels. After staining, gel images were digitized to estimate molecular weights (MW) and integrated optical density (IOD) of each lane and of individual bands. Total seminal plasma protein concentration was 2.19 +/- 1.56 g/dL (mean +/- SD; range 1.12-5.19 g/dL). A total of 37 protein bands were identified (although no dog had all 37 bands). In the 13% gel, molecular weights ranged from 100.6 to 17.1 kDa, with four bands (49.7, 33.2, 26.4, and 19.5 kDa) present in samples from all dogs. In the 22% gel, molecular weights ranged from 15.6 to 3.6 kDa, with nine bands (15.6, 13.5, 12.7, 11.7, 10.5, 8.7, 7.8, 5.6, and 4.9 kDa) present in samples from all dogs. Combined for both gels, the majority of bands (85%) had molecular weights < 17 kDa, with B20 (15.6 kDa) in high concentrations in samples from all dogs. There were positive correlations (P <= 0.01) between two bands, 134 (67 kDa) and B5 (58.6 kDa), and sperm motility (r = 0.66 and r = 0.46), sperm vigor (r = 0.56 and r = 0.66), percentage of morphologically normal spermatozoa (r = 0.55 and r = 0.59), the hypoosmotic swelling test (r = 0.76 and r 0.68), and fluorescent staining (r = 0.56 and r = 0.59), respectively. In conclusion, 37 proteins were identified in seminal plasma; two were significantly correlated with semen characteristics. (c) 2007 Elsevier B.V. All rights reserved.

Testicular thermoregulation in Bos indicus, crossbred and Bos taurus bulls: relationship with scrotal, testicular vascular cone and testicular morphology, and effects on semen quality and sperm production

Mechanisms of testicular thermoregulation, the relationship of scrotal, testicular vascular cone (TVC), and testicular morphology with thermoregulatory capability, and their effects on semen quality and sperm production were studied in 20 Bos indicus, 28 crossbred, and 26 Bos taurus bulls. The ratio of testicular artery length and volume to testicular volume were larger (P < 0.05) in B. indicus and crossbred bulls than in B. taurus bulls (1.03 and 0.94 cm/cm(2). versus 0.48 cm/cm(3); 0.034 and 0.047 ml/cm(3) versus 0.017 ml/cm(3), respectively). Testicular artery wall thickness (average 192.5, 229.0, and 290.0 mum, respectively) and arterial-venous blood distance in the TVC (average 330.5, 373.7, and 609.4 pm, respectively) were smallest in B. indicus, intermediary in crossbred, and greatest in B. taurus bulls (P < 0.05); the proximity between arterial and venous blood was consistent with the estimated decrease in arterial blood temperature after passage through the TVC (5.9, 5.0, and 2.9 degreesC, in B. indicus, crossbred, and B. taurus bulls, respectively). In crossbred and B. taurus bulls, there was a positive top-to-bottom scrotal temperature gradient and a negative testicular subtunic temperature gradient. However, in B. indicus bulls, both scrotal and testicular subtunic temperatures gradients were positive. Differences in the vascular arrangement, characteristics of the artery (e.g. wall thickness) or thickness of the tunica albuginea may have affected the testicular arterial blood and subtunic temperatures in B. indicus bulls. Better testicular thermoregulatory capability was associated with increased scrotal shape (pendulosity), testicular artery length and volume, and top-to-bottom gradient of the distance between the artery wall and the veins in the TVC. Increased semen quality was associated with increased testicular volume and scrotal subcutaneous (SQT) temperature gradient, and with decreased scrotal surface and testicular temperatures. Increased sperm production was associated with increased testicular artery volume, testicular volume, and SQT temperature gradient, and with decreased testicular artery wall thickness, scrotal circumference (SC), and scrotal surface, testicular subtunic, and epididymal temperatures. In conclusion, morphology of the TVC may contribute to the greater resistance of B. indicus bulls to high ambient temperatures by conferring a better testicular blood supply and by facilitating heat transfer between the testicular artery and veins. Testicular thermoregulation was associated with opposing scrotal and testicular subtunic temperatures gradients only in crossbred and B. taurus bulls. Scrotal, TVC, and testicular morphology influence testicular thermoregulatory capability and were associated with differences in semen quality and sperm production. (C) 2003 Elsevier B.V. All rights reserved.