Development of Beluga, Delphinapterus leucas, Capture and Satellite Tagging Protocol in Cook Inlet, Alaska

Attempts to capture and place satellite tags on belugas, Delphinapterus leucas, in Cook Inlet, Alaska were conducted during late spring and summer of 1995, 1997, and 1999. In 1995, capture attempts using a hoop net proved impractical in Cook Inlet. In 1997, capture efforts focused on driving belugas into nets. Although this method had been successful in the Canadian High Arctic, it failed in Cook Inlet due to the ability of the whales to detect and avoid nets in shallow and very turbid water. In 1999, belugas were successfully captured using a gillnet encirclement technique. A satellite tag was attached to a juvenile male, which subsequently provided the first documentation of this species’ movements within Cook Inlet during the summer months (31 May–17 September).

Harvest History of Belugas, Delphinapterus leucas, in Cook Inlet, Alaska

Belugas, Delphinapterus leucas, in Cook Inlet, Alaska, represent a unique and isolated marine mammal population that has been hunted for a variety of purposes since prehistoric times. Archeological studies have shown that both Alutiiq Eskimos and Dena'ina Atabaskan Indians have long utilized many marine resources in Cook Inlet, including belugas. Over the past century, commercial whaling and sport hunting also occurred periodically in Cook Inlet prior to the Marine Mammal Protection Act of 1972 (MMPA). During the 1990's, the hunting mortality by Alaska Natives apparently increased to 40-70 whales per year, which led to the decling of this stock and its subsequent designation in 2000 as depleted under the MMPA. Concerns about the decline of the Cook Inlet stock resulted in a voluntary suspension of the subsistenc hunt by Alaska Natives in 1999. The difficulty in obtaining accurate estimates for the harvest of these whales is due to the inability to identify all of the hunters and, in turn, the size of the harvest. Attempts to reconstruct harvest records based on hunters' recollections and interviews from only a few households have been subject to a wide degree of speculation. To adequately monitor the beluga harvest, the National Marine Fisheries Service established marking and reporting regulations in October 1999. These rules require that Alaska Natives who hunt belugas in Cook Inlet must collect the lowere left jaw from harvested whales and complete a report that includes date and time of the harvest, coloration of the whale, harvest location, and method of harvest. The MMPA was amended in 2000 to require a cooperative agreement between the National Marine Fisheries Service and Alaska Native organizations before hunting could be resumed.

Traditional Knowledge of the Ecology of Belugas, Delphinapterus leucas, in Cook Inlet, Alaska

The population of belugas, Delphinapterus leucas, in Cook Inlet, Alaska, is geographically isolated and appears to be declining. Conservation efforts require appropriate information about population levels and trends, feeding and behavior, reproduction, and natural and anthropogenic impacts. This study documents traditional ecological knowledge of the Alaska Native hunters of belugas in Cook Inlet to add information from this critical source. Traditional knowledge about belugas has been documented elsewhere by the author, and the same methods were used in Cook Inlet to systematically gather information concerning knowledge of the natural history of this beluga population and its habitat. The hunters’knowledge is largely consistent with what is known from previous research, and it extends the published descriptions of the ecology of beluga whales in Cook Inlet. Making this information available and involving the hunters to a greater extent in research and management are important contributions to the conservation of Cook Inlet beluga

History of a Systematics Odyssey: The Marine Flora and Fauna of the Eastern United States

On an early fall day in September 1962 I sat quietly, thoughtfully, at my large desk in a newly renovated corner office in the old Crane wing of the Lillie Building, Marine Biological Laboratory (MBL), Woods Hole, Massachusetts. Looking out through high, ancient windows, I could see the busy main street of Woods Hole in the foreground, Martha's Vineyard beyond, behind me the MBL Stone Candle House, across the street the Woods Hole Oceanographic Institution (WHOI) and to the far right, the Biological Laboratory of the Bureau of Commercial Fisheries (BCF)(Fig. 1). Down the inner hall from my office stretched renovated quarters for the fledgling, ongoing, year-round MBL Systematics-Ecology Program (SEP), which I had been invited to direct.

Construction and Operation of a Two-place Diver's Sled

Fisheries gear researchers have employed scuba diver-operated sleds to evaluate towed fishing systems since the early 1950's. One of the earliest sled designs was a converted Stokes litter in which two divers sat tandem with the forward diver operating the diving controls (Sand, 1956). The litter was relatively easy to maneuver and provided a comfortable platform for observing operational fishing gear. However, the use of underwater photographic equipment to document gear performance was difficult due to the limited mobility of the observer-cameraman.

Adjoint linearised Euler solver in the frequency domain for jet noise modelling

The paper is devoted to extending the new efficient frequency-domain method of adjoint Green's function calculation to curvilinear multi-block RANS domains for middle and farfield sound computations. Numerical details of the method such as grids, boundary conditions and convergence acceleration are discussed. Two acoustic source models are considered in conjunction with the method and acoustic modelling results are presented for a benchmark low-Reynolds-number jet case.

An accelerated 3D Navier-Stokes solver for flows in turbomachines

A new three-dimensional Navier-Stokes solver for flows in turbomachines has been developed. The new solver is based on the latest version of the Denton codes, but has been implemented to run on Graphics Processing Units (GPUs) instead of the traditional Central Processing Unit (CPU). The change in processor enables an order-of-magnitude reduction in run-time due to the higher performance of the GPU. Scaling results for a 16 node GPU cluster are also presented, showing almost linear scaling for typical turbomachinery cases. For validation purposes, a test case consisting of a three-stage turbine with complete hub and casing leakage paths is described. Good agreement is obtained with previously published experimental results. The simulation runs in less than 10 minutes on a cluster with four GPUs. Copyright © 2009 by ASME.

Acceleration of an unstructured hybrid mesh RANS solver by porting to GPU architectures

The modern CFD process consists of mesh generation, flow solving and post-processing integrated into an automated workflow. During the last several years we have developed and published research aimed at producing a meshing and geometry editing system, implemented in an end-to-end parallel, scalable manner and capable of automatic handling of large scale, real world applications. The particular focus of this paper is the associated unstructured mesh RANS flow solver and the porting of it to GPU architectures. After briefly describing the solver itself, the special issues associated with porting codes using unstructured data structures are discussed - followed by some application examples. Copyright © 2011 by W.N. Dawes.

An investigation of the kinetics of CO2 uptake by a synthetic calcium based sorbent

This study examines the kinetics of carbonation by CO2 at temperatures of ca. 750 °C of a synthetic sorbent composed of 15 wt% mayenite (Ca12Al14O33) and CaO, designated HA-85-850, and draws comparisons with the carbonation of a calcined limestone. In-situ XRD has verified the inertness of mayenite, which neither interacts with the active CaO nor does it significantly alter the CaO carbonation–calcination equilibrium. An overlapping grain model was developed to predict the rate and extent of carbonation of HA-85-850 and limestone. In the model, the initial microstructure of the sorbent was defined by a discretised grain size distribution, assuming spherical grains. The initial input to the model – the size distribution of grains – was a fitted parameter, which was in good agreement with measurements made with mercury porosimetry and by the analysis of SEM images of sectioned particles. It was found that the randomly overlapping spherical grain assumption offered great simplicity to the model, despite its approximation to the actual porous structure within a particle. The model was able to predict the performance of the materials well and, particularly, was able to account for changes in rate and extent of reaction as the structure evolved after various numbers of cycles of calcination and carbonation.