Feasibility of replacing multiple ADSL connections with Multi-Dwelling Access

This final project was made for the Broadband/Implementation department of TeliaSonera Finland. The question to be examined is if the operator should replace multiple ADSL connections implemented over a leased line with Multi-Dwelling access based on an Ethernet/Optical Fibre access network. The project starts with describing the technology related to these access network solu-tions and presents the technology that is used in TeliaSonera Finland's access network. It continues from the technology to describe the problem with some of the ADSL implemen-tations of TeliaSonera. The problem is the implementations done over a leased line that can cost TeliaSonera over years as much as a possible investment to extend network when there is several lines leased to the same building. The project proposes a Multi-Dwelling access as a solution to this problem and defines the circumstances when to use it. After a satisfactory solution has found the project takes a view how implementation of the solution might alter the network and a new problem is found. When used commonly to replace need of ADSL implementation Multi-Dwelling access would significantly increase optical cable congestion near operators POP. As a final deed this project also proposes a technical change to existing way to implement multi-dwelling access with EPON technology.

Dynamic price competition with fixed capacities

Many revenue management (RM) industries are characterized by (a) fixed capacities in theshort term (e.g., hotel rooms, seats on an airline flight), (b) homogeneous products (e.g., twoairline flights between the same cities at similar times), and (c) customer purchasing decisionslargely influenced by price. Competition in these industries is also very high even with just twoor three direct competitors in a market. However, RM competition is not well understood andpractically all known implementations of RM software and most published models of RM donot explicitly model competition. For this reason, there has been considerable recent interestand research activity to understand RM competition. In this paper we study price competitionfor an oligopoly in a dynamic setting, where each of the sellers has a fixed number of unitsavailable for sale over a fixed number of periods. Demand is stochastic, and depending on howit evolves, sellers may change their prices at any time. This reflects the fact that firms constantly,and almost costlessly, change their prices (alternately, allocations at a price in quantity-basedRM), reacting either to updates in their estimates of market demand, competitor prices, orinventory levels. We first prove existence of a unique subgame-perfect equilibrium for a duopoly.In equilibrium, in each state sellers engage in Bertrand competition, so that the seller withthe lowest reservation value ends up selling a unit at a price that is equal to the equilibriumreservation value of the competitor. This structure hence extends the marginal-value conceptof bid-price control, used in many RM implementations, to a competitive model. In addition,we show that the seller with the lowest capacity sells all its units first. Furthermore, we extendthe results transparently to n firms and perform a number of numerical comparative staticsexploiting the uniqueness of the subgame-perfect equilibrium.

Focal dystonia and the Sensory-Motor Integrative Loop for Enacting (SMILE).

Performing accurate movements requires preparation, execution, and monitoring mechanisms. The first two are coded by the motor system, the latter by the sensory system. To provide an adaptive neural basis to overt behaviors, motor and sensory information has to be properly integrated in a reciprocal feedback loop. Abnormalities in this sensory-motor loop are involved in movement disorders such as focal dystonia, a hyperkinetic alteration affecting only a specific body part and characterized by sensory and motor deficits in the absence of basic motor impairments. Despite the fundamental impact of sensory-motor integration mechanisms on daily life, the general principles of healthy and pathological anatomic-functional organization of sensory-motor integration remain to be clarified. Based on the available data from experimental psychology, neurophysiology, and neuroimaging, we propose a bio-computational model of sensory-motor integration: the Sensory-Motor Integrative Loop for Enacting (SMILE). Aiming at direct therapeutic implementations and with the final target of implementing novel intervention protocols for motor rehabilitation, our main goal is to provide the information necessary for further validating the SMILE model. By translating neuroscientific hypotheses into empirical investigations and clinically relevant questions, the prediction based on the SMILE model can be further extended to other pathological conditions characterized by impaired sensory-motor integration.

Development of LRFD Procedures for Bridge Pile Foundations in Iowa, September 2011

In response to the mandate on Load and Resistance Factor Design (LRFD) implementations by the Federal Highway Administration (FHWA) on all new bridge projects initiated after October 1, 2007, the Iowa Highway Research Board (IHRB) sponsored these research projects to develop regional LRFD recommendations. The LRFD development was performed using the Iowa Department of Transportation (DOT) Pile Load Test database (PILOT). To increase the data points for LRFD development, develop LRFD recommendations for dynamic methods, and validate the results of LRFD calibration, 10 full-scale field tests on the most commonly used steel H-piles (e.g., HP 10 x 42) were conducted throughout Iowa. Detailed in situ soil investigations were carried out, push-in pressure cells were installed, and laboratory soil tests were performed. Pile responses during driving, at the end of driving (EOD), and at re-strikes were monitored using the Pile Driving Analyzer (PDA), following with the CAse Pile Wave Analysis Program (CAPWAP) analysis. The hammer blow counts were recorded for Wave Equation Analysis Program (WEAP) and dynamic formulas. Static load tests (SLTs) were performed and the pile capacities were determined based on the Davisson’s criteria. The extensive experimental research studies generated important data for analytical and computational investigations. The SLT measured load displacements were compared with the simulated results obtained using a model of the TZPILE program and using the modified borehole shear test method. Two analytical pile setup quantification methods, in terms of soil properties, were developed and validated. A new calibration procedure was developed to incorporate pile setup into LRFD.

How to measure cortical folding from MR images: a step-by-step tutorial to compute local gyrification index.

Cortical folding (gyrification) is determined during the first months of life, so that adverse events occurring during this period leave traces that will be identifiable at any age. As recently reviewed by Mangin and colleagues(2), several methods exist to quantify different characteristics of gyrification. For instance, sulcal morphometry can be used to measure shape descriptors such as the depth, length or indices of inter-hemispheric asymmetry(3). These geometrical properties have the advantage of being easy to interpret. However, sulcal morphometry tightly relies on the accurate identification of a given set of sulci and hence provides a fragmented description of gyrification. A more fine-grained quantification of gyrification can be achieved with curvature-based measurements, where smoothed absolute mean curvature is typically computed at thousands of points over the cortical surface(4). The curvature is however not straightforward to comprehend, as it remains unclear if there is any direct relationship between the curvedness and a biologically meaningful correlate such as cortical volume or surface. To address the diverse issues raised by the measurement of cortical folding, we previously developed an algorithm to quantify local gyrification with an exquisite spatial resolution and of simple interpretation. Our method is inspired of the Gyrification Index(5), a method originally used in comparative neuroanatomy to evaluate the cortical folding differences across species. In our implementation, which we name local Gyrification Index (lGI(1)), we measure the amount of cortex buried within the sulcal folds as compared with the amount of visible cortex in circular regions of interest. Given that the cortex grows primarily through radial expansion(6), our method was specifically designed to identify early defects of cortical development. In this article, we detail the computation of local Gyrification Index, which is now freely distributed as a part of the FreeSurfer Software (http://surfer.nmr.mgh.harvard.edu/, Martinos Center for Biomedical Imaging, Massachusetts General Hospital). FreeSurfer provides a set of automated reconstruction tools of the brain's cortical surface from structural MRI data. The cortical surface extracted in the native space of the images with sub-millimeter accuracy is then further used for the creation of an outer surface, which will serve as a basis for the lGI calculation. A circular region of interest is then delineated on the outer surface, and its corresponding region of interest on the cortical surface is identified using a matching algorithm as described in our validation study(1). This process is repeatedly iterated with largely overlapping regions of interest, resulting in cortical maps of gyrification for subsequent statistical comparisons (Fig. 1). Of note, another measurement of local gyrification with a similar inspiration was proposed by Toro and colleagues(7), where the folding index at each point is computed as the ratio of the cortical area contained in a sphere divided by the area of a disc with the same radius. The two implementations differ in that the one by Toro et al. is based on Euclidian distances and thus considers discontinuous patches of cortical area, whereas ours uses a strict geodesic algorithm and include only the continuous patch of cortical area opening at the brain surface in a circular region of interest.

Development of LRFD Procedures for Bridge Pile Foundations in Iowa: Volume II: Field Testing of Steel Piles in Clay, Sand, and Mixed Soils and Data Analysis, September 2011

In response to the mandate on Load and Resistance Factor Design (LRFD) implementations by the Federal Highway Administration (FHWA) on all new bridge projects initiated after October 1, 2007, the Iowa Highway Research Board (IHRB) sponsored these research projects to develop regional LRFD recommendations. The LRFD development was performed using the Iowa Department of Transportation (DOT) Pile Load Test database (PILOT). To increase the data points for LRFD development, develop LRFD recommendations for dynamic methods, and validate the results ofLRFD calibration, 10 full-scale field tests on the most commonly used steel H-piles (e.g., HP 10 x 42) were conducted throughout Iowa. Detailed in situ soil investigations were carried out, push-in pressure cells were installed, and laboratory soil tests were performed. Pile responses during driving, at the end of driving (EOD), and at re-strikes were monitored using the Pile Driving Analyzer (PDA), following with the CAse Pile Wave Analysis Program (CAPWAP) analysis. The hammer blow counts were recorded for Wave Equation Analysis Program (WEAP) and dynamic formulas. Static load tests (SLTs) were performed and the pile capacities were determined based on the Davisson’s criteria. The extensive experimental research studies generated important data for analytical and computational investigations. The SLT measured loaddisplacements were compared with the simulated results obtained using a model of the TZPILE program and using the modified borehole shear test method. Two analytical pile setup quantification methods, in terms of soil properties, were developed and validated. A new calibration procedure was developed to incorporate pile setup into LRFD.

First principles LDA+U and GGA+U study of cerium oxides: Dependence on the effective U-parameter

The electronic structure and properties of cerium oxides (CeO2 and Ce2O3) have been studied in the framework of the LDA+U and GGA(PW91)+U implementations of density functional theory. The dependence of selected observables of these materials on the effective U parameter has been investigated in detail. The examined properties include lattice constants, bulk moduli, density of states, and formation energies of CeO2 and Ce2O3. For CeO2, the LDA+U results are in better agreement with experiment than the GGA+U results whereas for the computationally more demanding Ce2O3 both approaches give comparable accuracy. Furthermore, as expected, Ce2O3 is much more sensitive to the choice of the U value. Generally, the PW91 functional provides an optimal agreement with experiment at lower U energies than LDA does. In order to achieve a balanced description of both kinds of materials, and also of nonstoichiometric CeO2¿x phases, an appropriate choice of U is suggested for LDA+U and GGA+U schemes. Nevertheless, an optimum value appears to be property dependent, especially for Ce2O3. Optimum U values are found to be, in general, larger than values determined previously in a self-consistent way.

Etat des lieux et potentiel de l'agriculture urbaine en Suisse : analyse de deux projets d'agriculture urbaine sous l'angle des régimes institutionnels des ressources naturelles

Ce travail de recherche dresse un panorama de l'état du développement des pratiques d'agriculture urbaine en Suisse et analyse le potentiel que celles-ci pourraient y développer, compte tenu des particularités du contexte national. La démarche adoptée suit une logique allant du général au particulier, de la théorie à la pratique, du descriptif vers l'analytique. Dans un premier temps, l'agriculture urbaine est abordée sous un angle conceptuel, comprenant un retour historique sur la relation ville-campagne et sur l'apparition récente du terme d'agriculture urbaine, un tour d'horizon de la littérature sur le sujet, une revue de ses diverses approches scientifiques et la circonscription des enjeux de sa définition. Dans un deuxième temps, l'agriculture urbaine est envisagée sous sa forme pratique, en Suisse comme à l'étranger. En ressort un inventaire étendu de ses différents types de mises en application, auquel correspond un panel d'atouts identifiés selon les trois versants du développement durable : social, écologique et économique. En troisième lieu les spécificités du contexte helvétique sont étudiées afin de comprendre quel est le cadre dans lequel le potentiel de l'agriculture urbaine pourrait se développer. Finalement, ce sont deux cas concrets d'agriculture urbaine qui sont analysés et évalués dans les détails, selon l'approche dite des régimes institutionnels des ressources naturelles (RIRN): le « plantage » lausannois du quartier de la Bourdonnette et le Stadiongarten dans le quartier Kreis 5 à Zurich. Au fil de cette recherche, il apparaît que l'agriculture urbaine révèle toute une série d'avantages en termes de développement durable, alors même que les villes suisses sont unanimement reconnues comme présentant un déficit dans ce domaine. De même, malgré les bienfaits importants que présentent ses diverses pratiques, l'agriculture urbaine reste encore très peu répandue en Suisse, le concept lui-même n'apparaissant que très rarement dans le discours des pouvoirs publics. Le principal frein à l'agriculture en ville est identifié comme étant le manque d'espace disponible dans les agglomérations, contrainte pourtant largement surmontable en y regardant de plus près. De par sa configuration topographique, le territoire suisse est particulièrement sujet à une étroite proximité entre espaces urbains et étendues agricoles, accroissant de ce fait la problématique de l'étalement urbain et du mitage du paysage. Parmi les enjeux de la lutte contre ces phénomènes concomitants, l'agriculture urbaine aurait un rôle important à jouer. En conclusion, une série de recommandations sont proposées afin que les projets d'agriculture urbaine puissent se développer et perdurer en Suisse. Abstract : This research paper provides an overview of the state of development of urban agriculture practices in Switzerland. It analyzes their potential of expansion while taking into account the particularities of the national context. The method follows a general to particular, theory to practice and descriptive to analytical reasoning. Firstly, urban agriculture is approached through a conceptual view, including a historical overview of the relationship between town and country and of the recent appearance of the term "urban agriculture". An outline of the literature on the subject, an examination of its various scientific approaches and riding issues of its definition are elaborated as well. In a second step, urban agriculture is considered in its practical form, both in Switzerland and abroad. From this we created an extensive inventory of various types of implementations which corresponds to a panel of assets identified according to the three aspects of sustainable development: social, ecology and economics. Thirdly the specificities of Swiss context are studied in order to understand the frame in which the potential of urban agriculture could be developed. Finally, two case studies of urban agriculture are analyzed and evaluated in detail, according to the so-called institutional regimes of natural resources (RIRN) approach: the "plantage" of the Bourdonnette neighborhood in Lausanne and the "Stadiongarten" in the Kreis 5 neighborhood in Zurich. Throughout this research, urban agriculture reveals a number of advantages in terms of sustainable development, even though the Swiss cities are unanimously recognized as having a deficit in this area. As well, despite the significant benefits that are its various practices, urban agriculture is still very uncommon in Switzerland, the concept itself appearing only rarely in public debates. The main obstacle to city agriculture is identified as the lack of available space in urban areas, however this constraint can easily be surpassed. By its topographical configuration, Switzerland is particularly prone to a close proximity between urban and agricultural spaces, thereby increasing the problems of urban sprawl. Among the stakes in the struggle against these interrelated phenomena, urban agriculture could play an important role. In conclusion, a series of recommendations are proposed so that urban agriculture projects can grow and persist in Switzerland.

Estimating the apparent transverse relaxation time (R2(*)) from images with different contrasts (ESTATICS) reduces motion artifacts.

Relaxation rates provide important information about tissue microstructure. Multi-parameter mapping (MPM) estimates multiple relaxation parameters from multi-echo FLASH acquisitions with different basic contrasts, i.e., proton density (PD), T1 or magnetization transfer (MT) weighting. Motion can particularly affect maps of the apparent transverse relaxation rate R2(*), which are derived from the signal of PD-weighted images acquired at different echo times. To address the motion artifacts, we introduce ESTATICS, which robustly estimates R2(*) from images even when acquired with different basic contrasts. ESTATICS extends the fitted signal model to account for inherent contrast differences in the PDw, T1w and MTw images. The fit was implemented as a conventional ordinary least squares optimization and as a robust fit with a small or large confidence interval. These three different implementations of ESTATICS were tested on data affected by severe motion artifacts and data with no prominent motion artifacts as determined by visual assessment or fast optical motion tracking. ESTATICS improved the quality of the R2(*) maps and reduced the coefficient of variation for both types of data-with average reductions of 30% when severe motion artifacts were present. ESTATICS can be applied to any protocol comprised of multiple 2D/3D multi-echo FLASH acquisitions as used in the general research and clinical setting.

Constraining ACT-R models of decision strategies: An experimental paradigm

It has been repeatedly debated which strategies people rely on in inference. These debates have been difficult to resolve, partially because hypotheses about the decision processes assumed by these strategies have typically been formulated qualitatively, making it hard to test precise quantitative predictions about response times and other behavioral data. One way to increase the precision of strategies is to implement them in cognitive architectures such as ACT-R. Often, however, a given strategy can be implemented in several ways, with each implementation yielding different behavioral predictions. We present and report a study with an experimental paradigm that can help to identify the correct implementations of classic compensatory and non-compensatory strategies such as the take-the-best and tallying heuristics, and the weighted-linear model.

A pipeline approach with spatial information for segmenting multiple sclerosis lesions on brain magnetic resonance imaging

Background: Conventional magnetic resonance imaging (MRI) techniques are highly sensitive to detect multiple sclerosis (MS) plaques, enabling a quantitative assessment of inflammatory activity and lesion load. In quantitative analyses of focal lesions, manual or semi-automated segmentations have been widely used to compute the total number of lesions and the total lesion volume. These techniques, however, are both challenging and time-consuming, being also prone to intra-observer and inter-observer variability.Aim: To develop an automated approach to segment brain tissues and MS lesions from brain MRI images. The goal is to reduce the user interaction and to provide an objective tool that eliminates the inter- and intra-observer variability.Methods: Based on the recent methods developed by Souplet et al. and de Boer et al., we propose a novel pipeline which includes the following steps: bias correction, skull stripping, atlas registration, tissue classification, and lesion segmentation. After the initial pre-processing steps, a MRI scan is automatically segmented into 4 classes: white matter (WM), grey matter (GM), cerebrospinal fluid (CSF) and partial volume. An expectation maximisation method which fits a multivariate Gaussian mixture model to T1-w, T2-w and PD-w images is used for this purpose. Based on the obtained tissue masks and using the estimated GM mean and variance, we apply an intensity threshold to the FLAIR image, which provides the lesion segmentation. With the aim of improving this initial result, spatial information coming from the neighbouring tissue labels is used to refine the final lesion segmentation.Results:The experimental evaluation was performed using real data sets of 1.5T and the corresponding ground truth annotations provided by expert radiologists. The following values were obtained: 64% of true positive (TP) fraction, 80% of false positive (FP) fraction, and an average surface distance of 7.89 mm. The results of our approach were quantitatively compared to our implementations of the works of Souplet et al. and de Boer et al., obtaining higher TP and lower FP values.Conclusion: Promising MS lesion segmentation results have been obtained in terms of TP. However, the high number of FP which is still a well-known problem of all the automated MS lesion segmentation approaches has to be improved in order to use them for the standard clinical practice. Our future work will focus on tackling this issue.

Browsing a component library using Non-functional Information

This paper highlights the role of non-functional information when reusing from a component library. We describe a method for selecting appropriate implementations of Ada packages taking non-functional constraints into account; these constraints model the context of reuse. Constraints take the form of queries using an interface description language called NoFun, which is also used to state non-functional information in Ada packages; query results are trees of implementations, following the import relationships between components. We define two different situations when reusing components, depending whether we take the library being searched as closed or extendible. The resulting tree of implementations can be manipulated by the user to solve ambiguities, to state default behaviours, and by the like. As part of the proposal, we face the problem of computing from code the non-functional information that determines the selection process.

Development of LRFD Design Procedures for Bridge Piles in Iowa – Field Testing of Steel H-Piles in Clay, Sand, and Mixed Soils and Data Analysis (Volume II), TR-583, 2011

In response to the mandate on Load and Resistance Factor Design (LRFD) implementations by the Federal Highway Administration (FHWA) on all new bridge projects initiated after October 1, 2007, the Iowa Highway Research Board (IHRB) sponsored these research projects to develop regional LRFD recommendations. The LRFD development was performed using the Iowa Department of Transportation (DOT) Pile Load Test database (PILOT). To increase the data points for LRFD development, develop LRFD recommendations for dynamic methods, and validate the results of LRFD calibration, 10 full-scale field tests on the most commonly used steel H-piles (e.g., HP 10 x 42) were conducted throughout Iowa. Detailed in situ soil investigations were carried out, push-in pressure cells were installed, and laboratory soil tests were performed. Pile responses during driving, at the end of driving (EOD), and at re-strikes were monitored using the Pile Driving Analyzer (PDA), following with the CAse Pile Wave Analysis Program (CAPWAP) analysis. The hammer blow counts were recorded for Wave Equation Analysis Program (WEAP) and dynamic formulas. Static load tests (SLTs) were performed and the pile capacities were determined based on the Davisson’s criteria. The extensive experimental research studies generated important data for analytical and computational investigations. The SLT measured load-displacements were compared with the simulated results obtained using a model of the TZPILE program and using the modified borehole shear test method. Two analytical pile setup quantification methods, in terms of soil properties, were developed and validated. A new calibration procedure was developed to incorporate pile setup into LRFD.

Do stacked species distribution models reflect altitudinal diversity patterns?

The objective of this study was to evaluate the performance of stacked species distribution models in predicting the alpha and gamma species diversity patterns of two important plant clades along elevation in the Andes. We modelled the distribution of the species in the Anthurium genus (53 species) and the Bromeliaceae family (89 species) using six modelling techniques. We combined all of the predictions for the same species in ensemble models based on two different criteria: the average of the rescaled predictions by all techniques and the average of the best techniques. The rescaled predictions were then reclassified into binary predictions (presence/absence). By stacking either the original predictions or binary predictions for both ensemble procedures, we obtained four different species richness models per taxa. The gamma and alpha diversity per elevation band (500 m) was also computed. To evaluate the prediction abilities for the four predictions of species richness and gamma diversity, the models were compared with the real data along an elevation gradient that was independently compiled by specialists. Finally, we also tested whether our richness models performed better than a null model of altitudinal changes of diversity based on the literature. Stacking of the ensemble prediction of the individual species models generated richness models that proved to be well correlated with the observed alpha diversity richness patterns along elevation and with the gamma diversity derived from the literature. Overall, these models tend to overpredict species richness. The use of the ensemble predictions from the species models built with different techniques seems very promising for modelling of species assemblages. Stacking of the binary models reduced the over-prediction, although more research is needed. The randomisation test proved to be a promising method for testing the performance of the stacked models, but other implementations may still be developed.

Brief alcohol intervention as pragmatic intervention: Who is voluntarily taking an offered intervention?

Brief alcohol interventions (BAI) have shown the potential to decrease problematic alcohol use among adolescents and young adults. Most of the BAI studies have been efficacy trials designed to achieve high internal validity but have raised questions regarding the feasibility of large-scale implementation. Providing interventions for those voluntarily wanting them might offer an alternative, and studies using this design would be more similar to effectiveness studies. The present research compares randomly selected 20-year-old men who took part in a scientific trial (efficacy) with those who voluntarily sought an intervention (effectiveness). Sampling took place during army recruitment procedures that are mandatory for all males in Switzerland. At-risk drinking (20+ drinks per week, or more than one risky drinking occasion of 6+ drinks per month) was determined a posteriori; there was no screening. There were a higher percentage of at-risk drinkers in the volunteer arm at baseline, but at-risk drinkers did not differ from those in the trial arm on any of the assessed alcohol measures. This suggests that offering BAI on a large-scale, voluntary basis may reach at-risk drinkers as effectively as do more scientifically oriented trials, without needing to adhere to screening and stringent research procedures. Nevertheless, BAI was more effective for at-risk drinkers who were invited for trial participation versus those who volunteered. This could be due to behavior that is already consolidated and is difficult to change. Lacking further modifications, real-world implementations of BAI for young men may be less effective than randomized controlled trials designed to test the efficacy of BAI.