A longitudinal investigation of coping processes during a merger: Implications for job satisfaction and organizational identification

This study tested the utility of a stress and coping model of employee adjustment to a merger Two hundred and twenty employees completed both questionnaires (Time 1: 3 months after merger implementation; Time 2: 2 years later). Structural equation modeling analyses revealed that positive event characteristics predicted greater appraisals of self-efficacy and less stress at Time 1. Self-efficacy, in turn, predicted greater use of problem-focused coping at Time 2, whereas stress predicted a greater use of problem-focused and avoidance coping. Finally, problem-focused coping predicted higher levels of job satisfaction and identification with the merged organization (Time 2), whereas avoidance coping predicted lower identification.

Balancing curriculum processes and content in a project centred curriculum - In pursuit of graduate attributes

Chemical engineering education is challenged around the world by demands and rapid changes encompassing a wide range of technical and social drivers. Graduates must be prepared for practice in increasingly diverse workplace environments in which generic or transferable attributes such as communication and teamwork together with technical excellence are mandated by prospective employers and society at large. If academe is to successfully deliver on these graduate attributes, effective curriculum design needs to include appropriate educational processes as well as course content. Conventional teacher centred approaches, stand-alone courses and retro-fitted remedial modules have not delivered the desired outcomes. Development of the broader spectrum of attributes is more likely when students are engaged with realistic and relevant experiences that demand the integration and practice of these attributes in contexts that the students find meaningful. This paper describes and evaluates The University of Queensland's Project Centred Curriculum in Chemical Engineering (PCC), a programme-wide approach to meeting these requirements. PCC strategically integrates project-based learning with more traditional instruction. Data collected shows improved levels of student attainment of generic skills with institutional and nationally benchmarked indicators showing significant increases in student perceptions of teaching quality, and overall satisfaction with the undergraduate experience. Endorsements from Australian academic, professional and industry bodies also support the approach as more effectively aligning engineering education with professional practice requirements.

A corpus-based analysis of transfer effects and connected speech processes in Vietnamese English

This paper presents a corpus-based descriptive analysis of the most prevalent transfer effects and connected speech processes observed in a comparison of 11 Vietnamese English speakers (6 females, 5 males) and 12 Australian English speakers (6 males, 6 females) over 24 grammatical paraphrase items. The phonetic processes are segmentally labelled in terms of IPA diacritic features using the EMU speech database system with the aim of labelling departures from native-speaker pronunciation. An analysis of prosodic features was made using ToBI framework. The results show many phonetic and prosodic processes which make non-native speakers’ speech distinct from native ones. The corpusbased methodology of analysing foreign accent may have implications for the evaluation of non-native accent, accented speech recognition and computer assisted pronunciation- learning.

Adoption of electronic commerce tools in business procurement:enhanced buying center structure and processes

Modern procurement is being shifted from paper-based, people-intensive buying systems toward electronic-based purchase procedures that rely on Internet communications and Web-enhanced buying tools. Develops a typology of e-commerce tools that have come to characterize cutting-edge industrial procurement. E-commerce aspects of purchasing are organized into communication and transaction tools that encompass both internal and external buying activities. Further, a model of the impact of e-commerce on the structure and processes of an organization's buying center is developed. The impact of the changing buying center on procurement outcomes in terms of efficiency and effectiveness is also analyzed. Finally, implications for business-to-business marketers and researchers are discussed.

People, technology, processes and risk knowledge sharing

The present global economic crisis creates doubts about the good use of accumulated experience and knowledge in managing risk in financial services. Typically, risk management practice does not use knowledge management (KM) to improve and to develop new answers to the threats. A key reason is that it is not clear how to break down the “organizational silos” view of risk management (RM) that is commonly taken. As a result, there has been relatively little work on finding the relationships between RM and KM. We have been doing research for the last couple of years on the identification of relationships between these two disciplines. At ECKM 2007 we presented a general review of the literature(s) and some hypotheses for starting research on KM and its relationship to the perceived value of enterprise risk management. This article presents findings based on our preliminary analyses, concentrating on those factors affecting the perceived quality of risk knowledge sharing. These come from a questionnaire survey of RM employees in organisations in the financial services sector, which yielded 121 responses. We have included five explanatory variables for the perceived quality of risk knowledge sharing. These comprised two variables relating to people (organizational capacity for work coordination and perceived quality of communication among groups), one relating to process (perceived quality of risk control) and two related to technology (web channel functionality and RM information system functionality). Our findings so far are that four of these five variables have a significant positive association with the perceived quality of risk knowledge sharing: contrary to expectations, web channel functionality did not have a significant association. Indeed, in some of our exploratory regression studies its coefficient (although not significant) was negative. In stepwise regression, the variable organizational capacity for work coordination accounted for by far the largest part of the variation in the dependent variable perceived quality of risk knowledge sharing. The “people” variables thus appear to have the greatest influence on the perceived quality of risk knowledge sharing, even in a sector that relies heavily on technology and on quantitative approaches to decision making. We have also found similar results with the dependent variable perceived value of Enterprise Risk Management (ERM) implementation.

Semantics of query-driven communication of exact values

We address the question of how to communicate among distributed processes valuessuch as real numbers, continuous functions and geometrical solids with arbitrary precision, yet efficiently. We extend the established concept of lazy communication using streams of approximants by introducing explicit queries. We formalise this approach using protocols of a query-answer nature. Such protocols enable processes to provide valid approximations with certain accuracy and focusing on certain locality as demanded by the receiving processes through queries. A lattice-theoretic denotational semantics of channel and process behaviour is developed. Thequery space is modelled as a continuous lattice in which the top element denotes the query demanding all the information, whereas other elements denote queries demanding partial and/or local information. Answers are interpreted as elements of lattices constructed over suitable domains of approximations to the exact objects. An unanswered query is treated as an error anddenoted using the top element. The major novel characteristic of our semantic model is that it reflects the dependency of answerson queries. This enables the definition and analysis of an appropriate concept of convergence rate, by assigning an effort indicator to each query and a measure of information content to eachanswer. Thus we capture not only what function a process computes, but also how a process transforms the convergence rates from its inputs to its outputs. In future work these indicatorscan be used to capture further computational complexity measures. A robust prototype implementation of our model is available.

Compositional semantics of dataflow networks with query-driven communication of exact values

We develop and study the concept of dataflow process networks as used for exampleby Kahn to suit exact computation over data types related to real numbers, such as continuous functions and geometrical solids. Furthermore, we consider communicating these exact objectsamong processes using protocols of a query-answer nature as introduced in our earlier work. This enables processes to provide valid approximations with certain accuracy and focusing on certainlocality as demanded by the receiving processes through queries. We define domain-theoretical denotational semantics of our networks in two ways: (1) directly, i. e. by viewing the whole network as a composite process and applying the process semantics introduced in our earlier work; and (2) compositionally, i. e. by a fixed-point construction similarto that used by Kahn from the denotational semantics of individual processes in the network. The direct semantics closely corresponds to the operational semantics of the network (i. e. it iscorrect) but very difficult to study for concrete networks. The compositional semantics enablescompositional analysis of concrete networks, assuming it is correct. We prove that the compositional semantics is a safe approximation of the direct semantics. Wealso provide a method that can be used in many cases to establish that the two semantics fully coincide, i. e. safety is not achieved through inactivity or meaningless answers. The results are extended to cover recursively-defined infinite networks as well as nested finitenetworks. A robust prototype implementation of our model is available.

Modeling high-speed network traffic with truncated α-stable processes

It has been reported that high-speed communication network traffic exhibits both long-range dependence (LRD) and burstiness, which posed new challenges in network engineering. While many models have been studied in capturing the traffic LRD, they are not capable of capturing efficiently the traffic impulsiveness. It is desirable to develop a model that can capture both LRD and burstiness. In this letter, we propose a truncated a-stable LRD process model for this purpose, which can characterize both LRD and burstiness accurately. A procedure is developed further to estimate the model parameters from real traffic. Simulations demonstrate that our proposed model has a higher accuracy compared to existing models and is flexible in capturing the characteristics of high-speed network traffic. © 2012 Springer-Verlag GmbH.

Knowledge transfer in website design:exploring the processes and benefits of design collaboration for non-creative Micros

This thesis explores the interaction between Micros (<10 employees) from non-creative sectors and website designers ("Creatives") that occurred when creating a website of a higher order than a basic template site. The research used Straussian Grounded Theory Method with a longitudinal design, in order to identify what knowledge transferred to the Micros during the collaboration, how it transferred, what factors affected the transfer and outcomes of the transfer including behavioural additionality. To identify whether the research could be extended beyond this, five other design areas were also examined, as well as five Small to Medium Enterprises (SMEs) engaged in website and branding projects. The findings were that, at the start of the design process, many Micros could not articulate their customer knowledge, and had poor marketing and visual language skills, knowledge core to web design, enabling targeted communication to customers through images. Despite these gaps, most Micros still tried to lead the process. To overcome this disjoint, the majority of the designers used a knowledge transfer strategy termed in this thesis as ‘Bi-Modal Knowledge Transfer’, where the Creative was aware of the transfer but the Micro was unaware, both for drawing out customer knowledge from the Micro and for transferring visual language skills to the Micro. Two models were developed to represent this process. Two models were also created to map changes in the knowledge landscapes of customer knowledge and visual language – the Knowledge Placement Model and the Visual Language Scale. The Knowledge Placement model was used to map the placement of customer knowledge within the consciousness, extending the known Automatic-Unconscious -Conscious model, adding two more locations – Peripheral Consciousness and Occasional Consciousness. Peripheral Consciousness is where potential knowledge is held, but not used. Occasional Consciousness is where potential knowledge is held but used only for specific tasks. The Visual Language Scale was created to measure visual language ability from visually responsive, where the participant only responds personally to visual symbols, to visually multi-lingual, where the participant can use visual symbols to communicate with multiple thought-worlds. With successful Bi-Modal Knowledge Transfer, the outcome included not only an effective website but also changes in the knowledge landscape for the Micros and ongoing behavioural changes, especially in marketing. These effects were not seen in the other design projects, and only in two of the SME projects. The key factors for this difference between SMEs and Micros appeared to be an expectation of knowledge by the Creatives and failure by the SMEs to transfer knowledge within the company.

Information and communication technology adoption in the Italian road freight haulage industry

Despite the importance of information and communication technology (ICT) in the management of transport and logistics systems, there is a shortage of studies in the road freight haulage sector. This paper is aimed at filling this void through an exploratory survey on ICT adoption and the influencing factors carried out in the Italian road transport market. The paper provides a review of the previous research on this topic that allows the identification of research gaps that have been addressed through a questionnaire survey. The findings provide evidence of a passive stance on ICT usage characterised by the adoption of isolated applications. The financial risk associated with technology investment and human resources are the main barriers to ICT adoption, while the improvement of service level and the reliability of transport operations emerge as stimulating factors. The results suggest that the potential benefits of technology have not been fully exploited and a risk-sensitive stance on ICT is evident preventing the full incorporation of ICT into business processes.

A domain specific modeling approach for coordinating user-centric communication services

Rapid advances in electronic communication devices and technologies have resulted in a shift in the way communication applications are being developed. These new development strategies provide abstract views of the underlying communication technologies and lead to the so-called user-centric communication applications. One user-centric communication (UCC) initiative is the Communication Virtual Machine (CVM) technology, which uses the Communication Modeling Language (CML) for modeling communication services and the CVM for realizing these services. In communication-intensive domains such as telemedicine and disaster management, there is an increasing need for user-centric communication applications that are domain-specific and that support the dynamic coordination of communication services commonly found in collaborative communication scenarios. However, UCC approaches like the CVM offer little support for the dynamic coordination of communication services resulting from inherent dependencies between individual steps of a collaboration task. Users either have to manually coordinate communication services, or reply on a process modeling technique to build customized solutions for services in a specific domain that are usually costly, rigidly defined and technology specific. ^ This dissertation proposes a domain-specific modeling approach to address this problem by extending the CVM technology with communication-specific abstractions of workflow concepts commonly found in business processes. The extension involves (1) the definition of the Workflow Communication Modeling Language (WF-CML), a superset of CML, and (2) the extension of the functionality of CVM to process communication-specific workflows. The definition of WF-CML includes the meta-model and the dynamic semantics for control constructs and concurrency. We also extended the CVM prototype to handle the modeling and realization of WF-CML models. A comparative study of the proposed approach with other workflow environments validates the claimed benefits of WF-CML and CVM.^

Processus d’appropriation des technologies de l’information et de la communication par les enseignants : le cas des tablettes

L’intégration des technologies de l’information et de la communication (TIC) en contexte éducatif représente un moyen concret d’action et de réflexion en sciences de l’éducation. Les scientifiques et les acteurs de terrain se questionnent sur l’intégration des technologies et sur les moyens à mettre en place afin de réussir ce processus parfois complexe. De fait, la pénétration des outils technologiques dans les établissements scolaires a été exponentielle ces dernières années. Il est aujourd’hui nécessaire de comprendre selon quelles perspectives ces outils s’intègrent en salle de classe. Un exemple marquant est celui de la tablette tactile, récemment intégrée massivement dans les écoles d’Amérique du Nord et d’Europe. Cet outil, relativement récent dans la sphère scolaire, demande une réflexion précise vis-à-vis des pratiques pédagogiques des enseignants et des processus d’intégration inhérents. Afin de répondre à ces questionnements, nous avons élaboré une recherche en trois temps. Dans un premier temps, nous avons dressé un portrait exhaustif des pratiques pédagogiques des enseignants utilisant quotidiennement la tablette tactile en salle de classe. Ce portrait nous permet d’esquisser une synthèse des usages et réalités pédagogiques qui entourent cet outil. Dans un deuxième temps, nous avons répertorié, analysé et classifié les modèles d’intégration des TIC présents dans la littérature. L’analyse de ces modèles nous a permis d’en extraire les forces et les lacunes intrinsèques. Ensuite, nous avons créé un modèle synthèse rassemblant les réflexions issues de ces analyses. En parallèle, nous avons créé une typologie permettant d’identifier et de classifier ces modèles. Dans un troisième temps, nous sommes partis des pratiques pédagogiques des enseignants et du modèle général d’intégration des TIC que nous avons conçu afin de comprendre quel était le processus d’intégration de la tablette en salle de classe. Les résultats obtenus mettent en évidence que l’utilisation de la tablette induit des usages pédagogiques novateurs qui facilitent l’enseignement et qui favorisent l’apprentissage des élèves. Cependant, nous constatons que la tablette n’est pas utilisée à son plein potentiel et que certains usages devraient être envisagés selon une perspective plus efficiente et adaptée. En ce qui concerne les processus d’intégration, nous avons identifié plusieurs éléments indispensables: ces processus doivent être itératifs et constructifs, des facteurs internes et externes doivent être considérés et des niveaux d’intégration doivent être identifiés. Le modèle ainsi conçu spécifie le modèle à privilégier et les aboutissants à considérer. À la suite de cette étape, nous avons conçu un modèle d’intégration spécifiquement dédié à la tablette. Celui-ci met en évidence, au-delà des caractéristiques définies dans le modèle général, une nécessaire formation, une implication des acteurs, un ajustement constant des pratiques pédagogiques et une itération indispensable. À la suite de ces considérations, nous constatons que le processus d’appropriation de la tablette est en cours de construction et que les nouvelles implantations, comme les existantes, doivent procéder à une analyse minutieuse des tenants et aboutissants des pratiques médiées par l’intégration de l’outil. En fin de document, une synthèse des résultats et des recommandations est proposée afin de favoriser l’intégration de la tablette tactile - et des TIC en général – dans la salle de classe.

Imagined intergroup contact facilitates intercultural communication for college students on academic exchange programs

Imagined intergroup contact (Crisp & Turner, 2009) is a new cognitive intervention designed to improve intergroup relations. In two studies, we examined whether it could also facilitate intercultural communication among international students and host country natives engaged in a college exchange program. In Study 1, international students who had recently arrived in Italy and participated in an imagined contact session displayed increased self-disclosure toward, and improved evaluation of, host country natives. In Study 2, Italian students mentally simulated positive contact with an unknown native from the host country prior to leaving for the exchange. Results from an online questionnaire administered on their return (on average, more than 7 months after the imagery task) revealed that participants who imagined contact reported spending more time with natives during the stay and enhanced outgroup evaluation, via reduced intergroup anxiety. Implications for enhancing the quality and effectiveness of college student exchange programs are discussed.

Processus d’appropriation des technologies de l’information et de la communication par les enseignants : le cas des tablettes

L’intégration des technologies de l’information et de la communication (TIC) en contexte éducatif représente un moyen concret d’action et de réflexion en sciences de l’éducation. Les scientifiques et les acteurs de terrain se questionnent sur l’intégration des technologies et sur les moyens à mettre en place afin de réussir ce processus parfois complexe. De fait, la pénétration des outils technologiques dans les établissements scolaires a été exponentielle ces dernières années. Il est aujourd’hui nécessaire de comprendre selon quelles perspectives ces outils s’intègrent en salle de classe. Un exemple marquant est celui de la tablette tactile, récemment intégrée massivement dans les écoles d’Amérique du Nord et d’Europe. Cet outil, relativement récent dans la sphère scolaire, demande une réflexion précise vis-à-vis des pratiques pédagogiques des enseignants et des processus d’intégration inhérents. Afin de répondre à ces questionnements, nous avons élaboré une recherche en trois temps. Dans un premier temps, nous avons dressé un portrait exhaustif des pratiques pédagogiques des enseignants utilisant quotidiennement la tablette tactile en salle de classe. Ce portrait nous permet d’esquisser une synthèse des usages et réalités pédagogiques qui entourent cet outil. Dans un deuxième temps, nous avons répertorié, analysé et classifié les modèles d’intégration des TIC présents dans la littérature. L’analyse de ces modèles nous a permis d’en extraire les forces et les lacunes intrinsèques. Ensuite, nous avons créé un modèle synthèse rassemblant les réflexions issues de ces analyses. En parallèle, nous avons créé une typologie permettant d’identifier et de classifier ces modèles. Dans un troisième temps, nous sommes partis des pratiques pédagogiques des enseignants et du modèle général d’intégration des TIC que nous avons conçu afin de comprendre quel était le processus d’intégration de la tablette en salle de classe. Les résultats obtenus mettent en évidence que l’utilisation de la tablette induit des usages pédagogiques novateurs qui facilitent l’enseignement et qui favorisent l’apprentissage des élèves. Cependant, nous constatons que la tablette n’est pas utilisée à son plein potentiel et que certains usages devraient être envisagés selon une perspective plus efficiente et adaptée. En ce qui concerne les processus d’intégration, nous avons identifié plusieurs éléments indispensables: ces processus doivent être itératifs et constructifs, des facteurs internes et externes doivent être considérés et des niveaux d’intégration doivent être identifiés. Le modèle ainsi conçu spécifie le modèle à privilégier et les aboutissants à considérer. À la suite de cette étape, nous avons conçu un modèle d’intégration spécifiquement dédié à la tablette. Celui-ci met en évidence, au-delà des caractéristiques définies dans le modèle général, une nécessaire formation, une implication des acteurs, un ajustement constant des pratiques pédagogiques et une itération indispensable. À la suite de ces considérations, nous constatons que le processus d’appropriation de la tablette est en cours de construction et que les nouvelles implantations, comme les existantes, doivent procéder à une analyse minutieuse des tenants et aboutissants des pratiques médiées par l’intégration de l’outil. En fin de document, une synthèse des résultats et des recommandations est proposée afin de favoriser l’intégration de la tablette tactile - et des TIC en général – dans la salle de classe.