Thermo-Mechanical Treatment Effects on Stress Relaxation and Hydrogen Embrittlement of Cold-Drawn Eutectoid Steels

The effects of the temperature and stretching levels used in the stress-relieving treatment of cold-drawn eutectoid steel wires are evaluated with the aim of improving the stress relaxation behavior and the resistance to hydrogen embrittlement. Five industrial treatments are studied, combining three temperatures (330, 400, and 460 °C) and three stretching levels (38, 50 and 64% of the rupture load). The change of the residual stress produced by the treatments is taken into consideration to account for the results. Surface residual stresses allow us to explain the time to failure in standard hydrogen embrittlement tests

Failure and impact behavior of facade panels made of glass fiber reinforced cement(GRC)

GRC is a cementitious composite material made up of a cement mortar matrix and chopped glass fibers. Due to its outstanding mechanical properties, GRC has been widely used to produce cladding panels and some civil engineering elements. Impact failure of cladding panels made of GRC may occur during production if some tool falls onto the panel, due to stone or other objects impacting at low velocities or caused by debris projected after a blast. Impact failure of a front panel of a building may have not only an important economic value but also human lives may be at risk if broken pieces of the panel fall from the building to the pavement. Therefore, knowing GRC impact strength is necessary to prevent economic costs and putting human lives at risk. One-stage light gas gun is an impact test machine capable of testing different materials subjected to impact loads. An experimental program was carried out, testing GRC samples of five different formulations, commonly used in building industry. Steel spheres were shot at different velocities on square GRC samples. The residual velocity of the projectiles was obtained both using a high speed camera with multiframe exposure and measuring the projectile’s penetration depth in molding clay blocks. Tests were performed on young and artificially aged GRC samples to compare GRC’s behavior when subjected to high strain rates. Numerical simulations using a hydrocode were made to analyze which parameters are most important during an impact event. GRC impact strength was obtained from test results. Also, GRC’s embrittlement, caused by GRC aging, has no influence on GRC impact behavior due to the small size of the projectile. Also, glass fibers used in GRC production only maintain GRC panels’ integrity but have no influence on GRC’s impact strength. Numerical models have reproduced accurately impact tests.

Experimental and Analytical Study of Masonry Infill Reinforced Concrete Frames Retrofitted with Steel Braces

In the present work a seismic retrofitting technique is proposed for masonry infilled reinforced concrete frames based on the replacement of infill panels by K-bracing with vertical shear link. The performance of this technique is evaluated through experimental tests. A simplified numerical model for structural damage evaluation is also formulated according to the notions and principles of continuum damage mechanics. The proposed model is calibrated with the experimental results. The experimental results have shown an excellent energy dissipation capacity with the proposed technique. Likewise, the numerical predictions with the proposed model are in good agreement with experimental results.

Damage tolerance of cold drawn ferritic-austenitic stainless steels wires for prestressed concrete

Damage tolerance of high strength cold-drawn ferritic–austenitic stainless steel wires is assessed by means of tensile fracture tests of cracked wires. The fatigue crack is transversally propagated from the wire surface. The damage tolerance curve of the wires results from the empirical failure load when given as a function of crack depth. As a consequence of cold drawing, the wire microstructure is orientated along its longitudinal axis and anisotropic fracture behaviour is found at macrostructural level at the tensile failure of the cracked specimens. An in situ optical technique known as video image correlation VIC-2D is used to get an insight into this failure mechanism by tensile testing transversally fatigue cracked plane specimens extracted from the cold-drawn wires. Finally, the experimentally obtained damage tolerance curve of the cold-drawn ferritic–austenitic stainless steel wires is compared with that of an elementary plastic collapse model and existing data of two types of high strength eutectoid steel currently used as prestressing steel for concrete.

Effects of hydrogen assisted stress corrosion on damage tolerance of a high-strength duplex stainless steel wire for prestressing concrete

The study brings new insights on the hydrogen assisted stress corrosion on damage tolerance of a high-strength duplex stainless steel wire which concerns its potential use as active reinforcement for concrete prestressing. The adopted procedure was to experimentally state the effect of hydrogen on the damage tolerance of cylindrical smooth and precracked wire specimens exposed to stress corrosion cracking using the aggressive medium of the standard test developed by FIP (International Prestressing Federation). Stress corrosion testing, mechanical fracture tests and scanning electron microscopy analysis allowed the damage assessment, and explain the synergy between mechanical loading and environment action on the failure sequence of the wire. In presence of previous damage, hydrogen affects the wire behavior in a qualitative sense, consistently to the fracture anisotropy attributable to cold drawing, but it does not produce quantitative changes since the steel fully preserves its damage tolerance.

Muro cortina modular con marco de baja transmitancia térmica integrado en el vidrio aislante a través de adhesivos estructurales = Unitised curtain wall with low thermal transmittance frame integrated within the insulating glass unit through structural adhesives

Los muros cortina modulares están constituidos por paneles prefabricados que se fijan al edificio a través de anclajes a lo largo del borde del forjado. El proceso de prefabricación garantiza buena calidad y control de los acabados y el proceso de instalación es rápido y no requiere andamiaje. Por estas razones su uso está muy extendido en torres. Sin embargo, el diseño de los marcos de aluminio podría ser más eficiente si se aprovechara la rigidez de los vidrios para reducir la profundidad estructural de los montantes. Asimismo, se podrían reducir los puentes térmicos en las juntas si se sustituyeran los marcos por materiales de menor conductividad térmica que el aluminio. Esta investigación persigue desarrollar un muro cortina alternativo que reduzca la profundidad estructural, reduzca la transmisión térmica en las juntas y permita un acabado enrasado al interior, sin que sobresalgan los montantes. La idea consiste en conectar un marco de material compuesto de fibra de vidrio a lo largo del borde del vidrio aislante a través de adhesivos estructurales para así movilizar una acción estructural compuesta entre los dos vidrios y lograr una baja transmitancia térmica. El marco ha de estar integrado en la profundidad del vidrio aislante. En una primera fase se han efectuado cálculos estructurales y térmicos preliminares para evaluar las prestaciones a un nivel esquemático. Además, se han realizado ensayos a flexión en materiales compuestos de fibra de vidrio y ensayos a cortante en las conexiones adhesivas entre vidrio y material compuesto. Con la información obtenida se ha seleccionado el material del marco y del adhesivo y se han efectuado cambios sobre el diseño original. Los análisis numéricos finales demuestran una reducción de la profundidad estructural de un 80% y una reducción de la transmisión térmica de un 6% en comparación con un sistema convencional tomado como referencia. El sistema propuesto permite obtener acabados enrasados. ABSTRACT Unitised curtain wall systems consist of pre manufactured cladding panels which can be fitted to the building via pre fixed brackets along the edge of the floor slab. They are universally used for high rise buildings because the factory controlled assembly of units ensures high quality and allows fast installation without external access. However, its frame is structurally over-dimensioned because it is designed to carry the full structural load, failing to take advantage of potential composite contribution of glass. Subsequently, it is unnecessarily deep, occupying valuable space, and protrudes to the inside, causing visual disruption. Moreover, it is generally made of high thermal conductivity metal alloys, contributing to substantial thermal transmission at joints. This research aims to develop a novel frame-integrated unitised curtain wall system that will reduce thermal transmission at joints, reduce structural depth significantly and allow an inside flush finish. The idea is to adhesively bond a Fibre Reinforced Polymer (FRP) frame to the edge of the Insulated Glass Unit (IGU), thereby achieving composite structural behaviour and low thermal transmittance. The frame is to fit within the glazing cavity depth. Preliminary analytical structural and numerical thermal calculations are carried out to assess the performance of an initial schematic design. 4-point bending tests on GFRP and single-lap shear tests on bonded connections between GFRP and glass are performed to inform the frame and adhesive material selection process and to characterise these materials. Based on the preliminary calculations and experimental tests, some changes are put into effect to improve the performance of the system and mitigate potential issues. Structural and thermal numerical analysis carried out on the final detail design confirm a reduction of the structural depth to almost one fifth and a reduction of thermal transmission of 6% compared to a benchmark conventional system. A flush glazed appearance both to the inside and the outside are provided while keeping the full functionality of a unitised system.

El lenguaje de la estructura: Mies van der Rohe y la construcción con acero y hormigón

John Summerson, en El Lenguaje Clásico de la Arquitectura, defiende que los órdenes clásicos que empleaban los arquitectos romanos para decorar sus edificios, no tienen una función estructural pero hacen expresivos a los edificios. Les hacen hablar. Arthur Schopenhauer afirma que “el destino de la Bella Arquitectura es poner de manifiesto la lucha entre el peso y la rigidez de los elementos estructurales”. Y Auguste Perret define la Arquitectura como “el arte de hacer cantar al punto de apoyo”. El objetivo de esta Tesis Doctoral es profundizar en la capacidad de expresión de la estructura. A través del estudio de las estructuras históricas, que se realiza en la primera parte de la Tesis, podemos concluir que existen tres categorías, tres maneras de expresión de la Estructura. Estructuras Vistas, que hablan, Estructuras Ocultas, que se esconden y Estructuras Ilusorias, que fingen. El Partenón y la Sainte Chapelle de París se estudian en el apartado de Estructuras Vistas. El Panteón, el Palacio de Carlos V, la Catedral de San Pablo en Londres, y otras arquitecturas renacentistas y romanas, en el apartado de Estructuras Ocultas. Y como Estructuras Ilusorias, la Alhambra (Dos Hermanas, Comares, el Patio de los Leones), Santa Sofía, y otras arquitecturas del barroco italiano. En la segunda parte de la Tesis se analiza la obra completa de Mies van der Rohe desde el punto de vista de esas tres categorías. Lo visto, lo oculto y lo ilusorio en las estructuras de Mies. Se estudia la evolución en la estructura de la casa, desde las primeras casas con Estructura Oculta de muro de ladrillo, hasta las últimas casas con Estructura Vista y columnas adelantadas, pasando por una etapa intermedia de casas con estructura mixta de muro de ladrillo en la que el acero comienza a hacer su aparición. Se analizan también seis soluciones estructurales en los Bloques y en las Torres: Estructura Vista reverberante, expresiva o inexpresiva vs Estructura Oculta con vestido horizontal, vestido reticular o vestido vertical. Y por último, se estudian las tres soluciones de Estructura Ilusoria que emplea Mies en sus Pabellones. La metodología de trabajo que se ha empleado se divide en cuatro apartados: El análisis bibliográfico; el análisis in situ de los edificios, que nos permite comprobar, por ejemplo, los efectos lumínicos de la columna acanalada del Partenón, o el efecto reverberante de las columnas de la Weissenhofsiedlung; el análisis crítico de planos y detalles constructivos, que nos lleva a concluir que la disposición de pantallas del Pabellón de Barcelona anula la lectura de la crujía estructural, y que la columna del restaurante Cantor se dispone con su alma perpendicular a la cercha, y no paralela, como cabría suponer si se quisiera aprovechar toda la capacidad portante del perfil en H; y por último, el análisis numérico y estructural, que nos lleva a confirmar el sobredimensionado de la Estructura del Patio de los Leones de la Alhambra o el sobredimensionado de la Estructura de la Casa Farnsworth. Lo que se confirma con esta Tesis Doctoral es que la Estructura es algo más, mucho más, que sólo transmisión de las cargas. ABSTRACT John Summerson, in The Classic Language of Architecture, argues that the classic orders used by Roman architects in the decoration of their buildings did not have a structural function, but made buildings expressive. They make them speak. Arthur Schopenhauer affirms that “the goal of Great Architecture is to highlight the struggle between the gravity and rigidity of structural elements”. And Auguste Perret defines Architecture as “the art of making the points of support sing”. The objective of this Doctoral Thesis is to examine the expressive capacity of structure. Following a study of historic structures in the first part of the thesis, we conclude that three categories exist, three ways of expressing Structure. Visible Structures that speak, Concealed Structures that are hidden and Illusory Structures that pretend. The Parthenon and the Sainte Chapelle in Paris are studied in the section on Visible Structures. The Pantheon, the Palace of Charles V, Saint Paul’s Cathedral in London, and other Renaissance and Roman architectures are dealt with in the Concealed Structures section. And, as examples of Illusory Structures, we focus on the Alhambra (The Hall of the Two Sisters, the Comares and the Court of the Lions), Saint Sophia, and other Italian Baroque architectures. In the second part of the Thesis the complete work of Mies van der Rohe is analysed from the perspective of these three categories. The visible, the concealed and the illusory, in the structures of Mies. We study how the structure of the house evolves, from the first houses with the Hidden Structure of the brick wall, to the later houses with Visible Structures and columns, via an intermediate phase of mixed-structure houses with brick walls, where steel first began to make its appearance. We also analyse six structural solutions in the Blocks and Towers: reverberant, expressive or inexpressive Visible Structure vs Concealed Structure with horizontal cladding, reticular cladding or vertical cladding. And finally, we look at the three Illusory Structure solutions that Mies employs in his Pavilions. The methodology employed is divided into four sections: a bibliographic analysis; an analysis in situ of the buildings, which allows us to test, for example, the lighting effects of the fluted column in the Parthenon, or the reverberant effect of the Weissenhofsiedlung columns; a critical analysis of plans and constructive details, which leads us to conclude that the arrangement of panels in the Barcelona Pavilion cancels out the structural centreline, and that the column in the Cantor restaurant is placed with its web perpendicular to the truss, and not parallel to it, as one might expect if one wanted to avail of all the load-bearing capacity of the H beam; and lastly, a numeric and structural analysis, which confirms the oversizing of the Court of the Lions structure in the Alhambra or the oversized structure of Farnsworth House. All of which confirms in this Doctoral Thesis that structure is something more, much more, than a mere conveyor of loads.

The making of the architecture of the plant cell wall: How cells exploit geometry

Cell wall deposition is a key process in the formation, growth, and differentiation of plant cells. The most important structural components of the wall are long cellulose microfibrils, which are synthesized by synthases embedded in the plasma membrane. A fundamental question is how the microfibrils become oriented during deposition at the plasma membrane. The current textbook explanation for the orientation mechanism is a guidance system mediated by cortical microtubules. However, too many contraindications are known in secondary cell walls for this to be a universal mechanism, particularly in the case of helicoidal arrangements, which occur in many situations. An additional construction mechanism involves liquid crystalline self-assembly [A. C. Neville (1993) Biology of Fibrous Composites: Development Beyond the Cell Membrane (Cambridge Univ. Press, Cambridge, U.K.)], but the required amount of bulk material that is able to equilibrate thermally is not normally present at any stage of the wall deposition process. Therefore, we have asked whether the complex ordered texture of helicoidal cell walls can be formed in the absence of direct cellular guidance mechanisms. We propose that they can be formed by a mechanism that is based on geometrical considerations. It explains the genesis of the complicated helicoidal texture and shows that the cell has intrinsic, versatile tools for creating a variety of textures. A compelling feature of the model is that local rules generate global order, a typical phenomenon of life.

Buoyancy-driven, rapid exhumation of ultrahigh-pressure metamorphosed continental crust

Preservation of ultrahigh-pressure (UHP) minerals formed at depths of 90–125 km require unusual conditions. Our subduction model involves underflow of a salient (250 ± 150 km wide, 90–125 km long) of continental crust embedded in cold, largely oceanic crust-capped lithosphere; loss of leading portions of the high-density oceanic lithosphere by slab break-off, as increasing volumes of microcontinental material enter the subduction zone; buoyancy-driven return toward midcrustal levels of a thin (2–15 km thick), low-density slice; finally, uplift, backfolding, normal faulting, and exposure of the UHP terrane. Sustained over ≈20 million years, rapid (≈5 mm/year) exhumation of the thin-aspect ratio UHP sialic sheet caught between cooler hanging-wall plate and refrigerating, downgoing lithosphere allows withdrawal of heat along both its upper and lower surfaces. The intracratonal position of most UHP complexes reflects consumption of an intervening ocean basin and introduction of a sialic promontory into the subduction zone. UHP metamorphic terranes consist chiefly of transformed, yet relatively low-density continental crust compared with displaced mantle material—otherwise such complexes could not return to shallow depths. Relatively rare metabasaltic, metagabbroic, and metacherty lithologies retain traces of phases characteristic of UHP conditions because they are massive, virtually impervious to fluids, and nearly anhydrous. In contrast, H2O-rich quartzofeldspathic, gneissose/schistose, more permeable metasedimentary and metagranitic units have backreacted thoroughly, so coesite and other UHP silicates are exceedingly rare. Because of the initial presence of biogenic carbon, and its especially sluggish transformation rate, UHP paragneisses contain the most abundantly preserved crustal diamonds.

Molecular cloning and sequence analysis of expansins--a highly conserved, multigene family of proteins that mediate cell wall extension in plants.

Expansins are unusual proteins discovered by virtue of their ability to mediate cell wall extension in plants. We identified cDNA clones for two cucumber expansins on the basis of peptide sequences of proteins purified from cucumber hypocotyls. The expansin cDNAs encode related proteins with signal peptides predicted to direct protein secretion to the cell wall. Northern blot analysis showed moderate transcript abundance in the growing region of the hypocotyl and no detectable transcripts in the nongrowing region. Rice and Arabidopsis expansin cDNAs were identified from collections of anonymous cDNAs (expressed sequence tags). Sequence comparisons indicate at least four distinct expansin cDNAs in rice and at least six in Arabidopsis. Expansins are highly conserved in size and sequence (60-87% amino acid sequence identity and 75-95% similarity between any pairwise comparison), and phylogenetic trees indicate that this multigene family formed before the evolutionary divergence of monocotyledons and dicotyledons. Sequence and motif analyses show no similarities to known functional domains that might account for expansin action on wall extension. A series of highly conserved tryptophans may function in expansin binding to cellulose or other glycans. The high conservation of this multigene family indicates that the mechanism by which expansins promote wall extensin tolerates little variation in protein structure.

Green Animal Shelter Design for the Stokes County Humane Society of North Carolina

The Stokes County Humane Society has the opportunity to implement sustainable design concepts and demonstrate long-term fiscal savings in the design of an animal shelter for Stokes County, North Carolina. The proposed renovated structure takes advantage of passive design strategies that convert a cold, steel structure into one with warmth, light, and functionality. Proposed design techniques include an interior courtyard, geothermal heating and cooling, solar panels, a green roof, rainwater harvesting, sustainable landscaping, and clever materials selection. A cost analysis identifies capital costs and long term operational costs for both traditional and sustainable construction techniques. The results are capital costs of a sustainable design that are comparable to a traditional build, with long-term operational cost savings and generated revenue.

An investigation of the slip-casting mechanism as applied to stainless steel powder /

The slip-casting technique, which is successfully employed in the ceramic industry, was utilized to produce sintered stainless steel components experimentally. The procedure used is described, along with an evaluation of the physical and mechanical properties of the samples produced. Specimens were made with properties comparable to those of wrought stainless steel and of cold pressed and sintered steel powder.

Transactions of the American Society for Steel Treating.

Publication suspended Jan. - Oct. 1931.

Chipless machining; methods of cold forming ferrous metals, including heading, rolling, spinning, swaging, extruding, and high-energy-rate forming.

Includes bibliography.

The effect of resin type on the sintering of freeformed maraging steel

The role of the resin type on the sintering of maraging steel with boron additions has been investigated. Two different resins were added to the steel mixture and their subsequent debinding was evaluated and sintering responses compared with that of a resin-free alloy. The two resins used, nylon and a mixture of phenolic resin and synthetic wax, possessed different debinding behaviour, with the latter causing significant carbon contamination of the parts. This caused the formation of a Ti-Mo carbide, depleting the matrix of these elements. Consequently, the microstructure consisted of the equilibrium Fe-Fe2B eutectic, as well as a Mo-rich boride. The liquid phase also appeared to contain significant amounts of carbon, which lowered the temperature at which the liquid formed, resulting in high density occurring at a much lower temperature. When nylon was used as the binder, a similar sintering response to the resin-free alloy was observed. (C) 2002 Published by Elsevier Science B.V.