Deutscher Beitrag zum internationalen Makrelen(Scomber scombrus) und Stöcker- (Trachurus trachurus) Eier-Survey

Based on the results from egg and larvae surveys, mackerel and horse mackerel are thought to form three more or less distinct stocks each in the North Sea and in the waters west of the British Isles. These are firstly the southern stocks in the southern part of the English Channel, Celtic Sea and Bay of Biscay, secondly the North Sea and finally the western stocks of both species, loeated between the Shetlands and southern Norway. It is argued here that in view of the high mobility and the extended seasonal migrations of both species a c1ear separation of the stocks can hardly be maintained. In this context the results of the 1995 mackerel and horse mackerel egg survey to the southern spawning location is presented.

Das europäisches Netzwerk zur Koordination der Altersbestimmung bei Fischen: European Fish Ageing Network (EFAN)

Financial support is going to be applied for from the European Commission in order to establish the European Fish Ageing Network (EFAN). The project, which was planned and initiated from Norway (Floedevigen) is supposed to be a concerted action from 14 European Countries involving about 35 institutions. The primary aim of the network is to coordinate the research in age reading, especially the improvement of data bases for reference material, the transformation of research (e.g. daily ring formation in otoliths) to each interested reader. Moreover, the applied financial support is supposed to be preliminary spent for travel of researcher and technicians to other institutes where the same fish species are aged. Reference material is supposed to be sent to the institutes for check-reading. Specific workshops will be held in cases where heterogeneous results occur from check-reading the reference material.

Internationaler Rotbarschsurvey auf den ozeanischen Sebastes mentella in der Irminger See unter isländischer, deutscher und russischer Beteiligung

A hydroacoustic survey on the oceanic redfish (oceanic Sebastes mentella) in the Irminger Sea and adjacent waters South and East of Greenland was carried out by Iceland, Germany and Russia. During this, about 250 000 nm2 were covered. The acoustic assessment yielded a stock size of approximately 1.6 x 10(6) tonnes or 2.6 x 10(9) individuals. This however, is considered to be an underestimation of the stock, as a result of partial mixing of the stock with the scattering layer. The oceanic redfish concentrations were densest at 200-300 m depth, mainly within temperatures of 3.5 °C to 5 °C. 61 % of the stock were males at an average length of 36 cm and an average weight of 582 g.

Deutsche und internationale Bestandsuntersuchungen an Heringen mit hydroakustischen Methoden

The international hydroacoustic herring survey in the North Sea is carried out since the early eighties with Dutch, Scottish, Danish und Norwegian contribution. Since 1994 Germany also participates in this survey on a regular basis and has taken over a sector in the easter part between the Dogger Bank and the Danish coast. This area is known for the abundance of chiefly juvenile herring and sprat. During the 1995 cruise some 420000 t of herring were found here, most of them being juveniles of age group I. Analyses of plankton hauls showed that planktonic echos were not caused by juvenile herring, instead the echos were apparently produced by small pelagic gastropodes of the genus Spiratella.

Damage detection in civil structures using high-frequency seismograms

The dynamic properties of a structure are a function of its physical properties, and changes in the physical properties of the structure, including the introduction of structural damage, can cause changes in its dynamic behavior. Structural health monitoring (SHM) and damage detection methods provide a means to assess the structural integrity and safety of a civil structure using measurements of its dynamic properties. In particular, these techniques enable a quick damage assessment following a seismic event. In this thesis, the application of high-frequency seismograms to damage detection in civil structures is investigated.

Two novel methods for SHM are developed and validated using small-scale experimental testing, existing structures in situ, and numerical testing. The first method is developed for pre-Northridge steel-moment-resisting frame buildings that are susceptible to weld fracture at beam-column connections. The method is based on using the response of a structure to a nondestructive force (i.e., a hammer blow) to approximate the response of the structure to a damage event (i.e., weld fracture). The method is applied to a small-scale experimental frame, where the impulse response functions of the frame are generated during an impact hammer test. The method is also applied to a numerical model of a steel frame, in which weld fracture is modeled as the tensile opening of a Mode I crack. Impulse response functions are experimentally obtained for a steel moment-resisting frame building in situ. Results indicate that while acceleration and velocity records generated by a damage event are best approximated by the acceleration and velocity records generated by a colocated hammer blow, the method may not be robust to noise. The method seems to be better suited for damage localization, where information such as arrival times and peak accelerations can also provide indication of the damage location. This is of significance for sparsely-instrumented civil structures.

The second SHM method is designed to extract features from high-frequency acceleration records that may indicate the presence of damage. As short-duration high-frequency signals (i.e., pulses) can be indicative of damage, this method relies on the identification and classification of pulses in the acceleration records. It is recommended that, in practice, the method be combined with a vibration-based method that can be used to estimate the loss of stiffness. Briefly, pulses observed in the acceleration time series when the structure is known to be in an undamaged state are compared with pulses observed when the structure is in a potentially damaged state. By comparing the pulse signatures from these two situations, changes in the high-frequency dynamic behavior of the structure can be identified, and damage signals can be extracted and subjected to further analysis. The method is successfully applied to a small-scale experimental shear beam that is dynamically excited at its base using a shake table and damaged by loosening a screw to create a moving part. Although the damage is aperiodic and nonlinear in nature, the damage signals are accurately identified, and the location of damage is determined using the amplitudes and arrival times of the damage signal. The method is also successfully applied to detect the occurrence of damage in a test bed data set provided by the Los Alamos National Laboratory, in which nonlinear damage is introduced into a small-scale steel frame by installing a bumper mechanism that inhibits the amount of motion between two floors. The method is successfully applied and is robust despite a low sampling rate, though false negatives (undetected damage signals) begin to occur at high levels of damage when the frequency of damage events increases. The method is also applied to acceleration data recorded on a damaged cable-stayed bridge in China, provided by the Center of Structural Monitoring and Control at the Harbin Institute of Technology. Acceleration records recorded after the date of damage show a clear increase in high-frequency short-duration pulses compared to those previously recorded. One undamage pulse and two damage pulses are identified from the data. The occurrence of the detected damage pulses is consistent with a progression of damage and matches the known chronology of damage.

Effects of harvesting methods on sustainability of a bay scallop fishery: dredging uproots seagrass and displaces recruits

Fishing is widely recognized to have profound effects on estuarine and marine ecosystems (Hammer and Jansson, 1993; Dayton et al., 1995). Intense commercial and recreational harvest of valuable species can result in population collapses of target and nontarget species (Botsford et al., 1997; Pauly et al., 1998; Collie et al. 2000; Jackson et al., 2001). Fishing gear, such as trawls and dredges, that are dragged over the seafloor inflict damage to the benthic habitat (Dayton et al., 1995; Engel and Kvitek, 1995; Jennings and Kaiser, 1998; Watling and Norse, 1998). As the growing human population, over-capitalization, and increasing government subsidies of fishing place increasing pressures on marine resources (Myers, 1997), a clear understanding of the mechanisms by which fishing affects coastal systems is required to craft sustainable fisheries management.

A Whale of a Deception

In late October of 1966, an imposing ship steamed quietly through the placid waters of the Suez Canal. Clad in drab industrial gray, and flying a Soviet hammer and sickle flag at her masthead, the vessel was accompanied by a large fleet of smaller craft. Any observer able to decipher Cyrillic script could have read, in rusting metallic letters on her bow, the name Sovetskaya Ukraina. The more experienced would perhaps have identified her as a whaling factory ship, traveling with her attendant fleet of catcher boats and scouting vessels on a transit that would take them south into the Red Sea and beyond.

Die vertikale Verteilung von Heringslarven im Greifswalder Bodden

Kurzfassung Im Rahmen einer Bachelorarbeit wurde untersucht, ob die Larven des frühjahrslaichenden Herings der westlichen Ostsee im Greifswalder Bodden eine inhomogene vertikale Verteilung aufweisen, da in bisherigen Studien aufgrund der niedrigen Gewässertiefe des Boddens von hydrografischer Durchmischung und somit homogener Ichthyoplanktonverteilung ausgegangen wurde. Dazu wurden zwei Nullhypothesen überprüft, eine, die annimmt, dass Heringslarven allgemein im Greifswalder Bodden homogen verteilt sind, eine zweite, nach der auch verschiedenen Längenklassen der Heringe homogen verteilt sind. Die Proben, die Mitte April an drei verschiedenen Stationen im Greifswalder Bodden genommen wurden, zeigten signifikante Unterschiede der Larvenabundanzen allgemein zwischen den beprobten Tiefenstufen als auch der Längenklassen zwischen den Tiefenstufen, sodass beide Nullhypothesen abzulehnen sind. Eine homogene Verteilung der Heringslarven kann ausgeschlossen werden. Abstract Larvae of the Western Baltic Spring Spawning Herring were sampled in the Greifswalder Bodden in the course of a Bachelor Thesis to investigate whether they are inhomogeneously vertically distributed. Previous research assumed homogeneous vertical distribution because of the shallowness of the Greifswalder Bodden due to hydrographical mixing of the water and the ichthyoplankton. Two null hypotheses were tested, one which presumes even vertical distribution of the herring larvae and another which presumes even vertical distribution within different length classes in the Greifswalder Bodden. Sampling took place at three different stations in the Greifswalder Bodden during April and results showed significant differences of the larvae abundances between the sampled depths and also significant differences of the length classes between the sampled depths. Therefore both null hypotheses can be rejected and a homogeneous vertical distribution of the herring larvae in the Greifswalder Bodden can be excluded.

Caracterização da distribuição de alelos de loci STR do cromossomo Y com elevada taxa de mutação em uma amostra populacional do Rio de Janeiro

Marcadores genéticos presentes no cromossomo Y, como os microssatélites (Y-STRs) e polimorfismos de único nucleotídeo (Y-SNPs) são utilizados na caracterização de linhagens masculinas, visto que são transmitidos às gerações seguintes sem alterações, a menos que ocorram mutações (Singh et al., 2011; Mitchell & Hammer, 1996; Butler, 2009). Por isso, esses marcadores são amplamente empregados em diversas situações, destacando-se o uso constante dos Y-STRs na genética forense por apresentarem alta capacidade de discriminar linhagens. Recentemente, foram descritos 13 marcadores com taxas de mutação substancialmente superiores àquelas verificadas para loci STR do cromossomo Y, denominados Rapidly Mutating (RM) Y-STRs (Ballantyne et al., 2010; Kayser et al., 2012). Devido às taxas de mutação elevadas, os RM-YSTRs apresentam maior eficiência na discriminação entre indivíduos proximamente relacionados, pertencentes à mesma linhagem patrilínea. O presente trabalho buscou aprofundar o conhecimento acerca das características populacionais e mutacionais dos loci RM-YSTRs em amostra do Rio de Janeiro, contribuindo com estudos desta natureza na população brasileira. Realizou-se a análise de 13 loci do cromossomo Y em 258 indivíduos do sexo masculino, compondo 129 pares de pais e filhos, nascidos no estado do Rio de Janeiro. O DNA das amostras foi extraído, conforme os protocolos vigentes na rotina do LDD-UERJ. As sequências genéticas de interesse foram amplificadas pela técnica de reação em cadeira da polimerase (PCR) através da realização de três PCR multiplex, cujos produtos de amplificação foram separados por eletroforese em sequenciador automático ABI-3500 (Applied Biosystems). Para os pares pai/filho que apresentaram haplótipos mutados, empregou-se a técnica de sequenciamento para confirmação das mutações. Os loci RM-YSTR geraram um poder de discriminação de 1,0 na amostra analisada, o que significa que todos os 129 indivíduos da amostra populacional apresentaram haplótipos diferentes para tais marcadores, com frequências de 0,0077 e diversidade haplotípica igual a 1. Além disso, foram obtidos valores elevados de diversidade gênica para os 13 marcadores. A análise de distância genética e os resultados de AMOVA baseados nos valores de Fst demonstraram que os RM-YSTR não indicam subdivisão populacional e traços ancestrais comuns. Tais valores estão associados às elevadas taxas de mutação encontradas, cuja média foi de 2,11 x 10-2. Foi possível observar que os loci RM-YSTR são muito discriminativos na amostra miscigenada analisada, além de terem maior capacidade de diferenciar indivíduos do que outros conjuntos de marcadores normalmente usados em estudos populacionais e análises forenses. Sendo assim, é possível concluir que os marcadores RM-YSTR são promissores para discriminar indivíduos da mesma linhagem patrilínea, visto que devido às suas elevadas taxas mutacionais e poder de discriminação, são capazes de diferenciar indivíduos de maneira mais eficiente do que os outros conjuntos de STR. Porém, é necessário maior número de estudos para melhor caracterização destes loci em diferentes populações.

Maryland commercial fisheries statistics, 1944-1945

This report presents a statistical analyses of the "fin" fisheries, as distinguished from the crab and oyster fisheries of Maryland, for 1944 and 1945. Comparative data on the catch by species, by area, and by gear, based principally on daily reports from the fishermen, are available for the first time as a result of a comprehensive statistical survey made by the Department of Research and Eduction to determine the results of the new management plan for the fisheries, referred to as the Maryland Management Plan. With the initiation in 1941 of a new system of fishery management in the State, a conservation plan based on the principle of stabilized fishing effort, it became obvious that a more accurate catch record system was needed for the proper administration of the program. The Management Plan stabilized the number of licensed fishermen at the 1939-1940 level, and provided for controlled expansion of the fishery to take place only when and where the industry warranted it as a result of increased fish populations. The text of the Plan may be found in Article 39, Section 60, Annotated Code of Maryland, 1943 Supplement. Publications 1, 2, 5, and 6 of the Educational Series of the Department of Research and Education explain the operating principles and the application of same to two important Maryland species, the shad and the rock or striped bass. Ocean fishery records only cover monthly gross landings.

Shock transmission and eigenvalue veering within a coupled system.

The operation of dynamical systems in harsh environments requires continuous monitoring. Internal sensors may be used to monitor the conditions in real time. A typical example is the sensor and electronic components used in space structures which, especially during launch, are subject to huge g force. The paper will present an experimental and theoretical study on a simplified model used to analyze the possible cause of high acceleration on the enclosed sensors and equipments due to impulsive loading. The model system consists of two beams coupled using compliant connections. An impulse hammer excites one beam, and vibrations are transmitted to the indirectly driven beam. A theoretical model is developed using a Rayleigh-Ritz approach and validated using experimental results in both the frequency and time domains. Monto Carlo simulation was done with random masses positioned on the indirectly driven beam to determine the worst-case conditions for maximum peak acceleration. Highest acceleration levels were found when mode matching in the two beams led to veering behavior in the coupled modes. The results suggest guidelines for the detailed design of internal components of a structure exposed to shock loading from its environment. [The authors thank Schlumberger Cambridge Research for financial support.].

The use of spatial impulse responses to characterise flexible forming processes with mobile tools

A novel test method for the characterisation of flexible forming processes is proposed and applied to four flexible forming processes: Incremental Sheet Forming (ISF), conventional spinning, the English wheel and power hammer. The proposed method is developed in analogy with time-domain control engineering, where a system is characterised by its impulse response. The spatial impulse response is used to characterise the change in workpiece deformation created by a process, but has also been applied with a strain spectrogram, as a novel way to characterise a process and the physical effect it has on the workpiece. Physical and numerical trials to study the effects of process and material parameters on spatial impulse response lead to three main conclusions. Incremental sheet forming is particularly sensitive to process parameters. The English wheel and power hammer are strongly similar and largely insensitive to both process and material parameters. Spinning develops in two stages and is sensitive to most process parameters, but insensitive to prior deformation. Finally, the proposed method could be applied to modelling, classification of existing and novel processes, product-process matching and closed-loop control of flexible forming processes. © 2012 Elsevier B.V.

Vibration of pressurised, elastic, spherical shells

Balloons are one example of pressurised, elastic, spherical shells. Whilst analytical solutions exist for the vibration of pressurised spheres, these models only incorporate constant tension in the membrane. For elastic shells, changes in curvature will result in restoring forces that are proportional to the elasticity in the membrane; hence the assumption of constant tension is not valid. This paper describes an analytical solution for the natural frequencies of an elastic spherical shell subject to internal pressure. When the membrane tension is set to zero, the results are shown to converge to the analytical solution for a spherical shell, and when the skin elasticity is neglected, the results converge to the constant-tension solution. This analytical solution is used to predict the natural frequencies of a small balloon, based on a value for the elastic modulus that is determined using biaxial tensile testing. These predictions are compared to experimental measurements of balloon vibrations using impact hammer testing, and good agreement is seen.

Computer System for Visual Recognition Using Active Knowledge

A system for visual recognition is described, with implications for the general problem of representation of knowledge to assist control. The immediate objective is a computer system that will recognize objects in a visual scene, specifically hammers. The computer receives an array of light intensities from a device like a television camera. It is to locate and identify the hammer if one is present. The computer must produce from the numerical "sensory data" a symbolic description that constitutes its perception of the scene. Of primary concern is the control of the recognition process. Control decisions should be guided by the partial results obtained on the scene. If a hammer handle is observed this should suggest that the handle is part of a hammer and advise where to look for the hammer head. The particular knowledge that a handle has been found combines with general knowledge about hammers to influence the recognition process. This use of knowledge to direct control is denoted here by the term "active knowledge". A descriptive formalism is presented for visual knowledge which identifies the relationships relevant to the active use of the knowledge. A control structure is provided which can apply knowledge organized in this fashion actively to the processing of a given scene.