Dimetildioxirano. 1. Oxidação de compostos de enxofre

A brief review of the chemistry of dimethyldioxirane is presented. This article specifically foccus on the preparation of dimethyldioxirane, its chemical reactivity, and specially on the oxidation of sulfur compounds.

Síntese e caracterização de compostos organometálicos de estanho (IV)

Organotin(IV) derivatives containing bulky R groups have been synthesized and characterized. It is discussed how their syntheses depend on the reaction conditions, such as stoichiometry of starting materials, bulkiness of the organo group attached to the Sn centre as well as temperature in which the reaction is carried out. Finally the molecular structure of Sn2Ph6, determined by X-ray diffraction is reviewed.

Componentes voláteis do café torrado. Parte I: compostos heterocíclicos

A review of heterocyclic compounds in roasted coffee is presented. The contents, precursors and sensorial properties of furans, pyrroles, oxazoles, thiazoles, thiophenes, pyrazines and pyridines are discussed. The impact heterocyclic compounds of coffee aroma are described.

Compostos fosfatados ricos em energia

The chemical and biological properties of energy-rich phosphate compounds, e.g. ATP and acetyl phosphate, were revised. The role of water in the formation of this class of energy-rich compounds in biological systems is also discussed.

Reações de Diels-Alder entre compostos carbonílicos a,b-insaturados e ciclopentadieno

We review herewith the use of solids such as activated alumina and other modern Lewis acid catalysts, as well as the influence of different solvents, including water, on the title reactions, described in the last seven years.

Presença de compostos carbonílicos no ar em ambientes internos na cidade de São Paulo

The presence of low carbonyl compounds (C1-C4) and glutaraldehyde was observed in 14 work-locations in São Paulo city, Brazil, during January to July 1997 period. The quantification of other carbonyls was not possible due to a sampling artifact caused probably by undesirable reactions between the ambient ozone and the organic substract of C18 cartridge used to collect carbonyls. High indoor concentrations, compared to outdoor levels, were observed for all compounds. Formaldehyde was the most abundant species (29 ppb) followed by acetone and acetaldehyde (25 and 17 ppb) with a small contribution of propanal, crotonaldehyde and C4 isomers (0.7 to 1.5 ppb) when related to the total indoor carbonyls level. Glutaraldehyde was observed only in two different occupational locations in a hospital at high concentrations (121 ppb). In general, high individual carbonyl levels as well as total carbonyls levels found in several locations indicated an unpropitious air quality for the occupants of these non-industrial sites.

Reações de inserção intramolecular de diazo compostos polifuncionais catalisadas por ródio(II): síntese de oxetan-3-ona-2-carboxilato e outros heterociclos funcionalizados

gamma-Hydroxy-alpha-diazo-beta-ketoesters are key intermediates in the chemistry of penicilin-based antibiotics and natural products. The method developed here for the synthesis of ethyl 2-diazo-4-hydroxy-3-oxo-butanoate 17 (in two steps from the diazo mercurial 2) compares very favorably with those reported in the literature for similar compounds. The Rh2(OAc)4-mediated intramolecular OH-insertion reaction of the diazo hydroxy ester 17 was investigated, furnishing the oxetan-3-one-2-carboxilate 18 in good yield. When the diazo ester lacks a free hydroxyl group as in the case of the phenoxy diazo ester 11 an intramolecular CH-insertion takes place, affording the 2H-chromene 20 in almost quantitative yield. The behavior of other functionalized diazo esters towards Rh2(OAc)4 was also investigated.

Extração e pré-concentração de compostos orgânicos voláteis por permeação em membrana para análise cromatográfica

This work discusses sample preparation processes for gas chromatography (GC) based on the technique of extraction through membrane permeation (MPE). The MPE technique may be easily coupled to GC via a relatively simple device, which is a module that holds the membrane and is directly connected to the GC column. The possibility of operational errors due to sample handling is substantially reduced in an MPE-GC system because the sample preparation and the chemical analysis are accomplished as a one-step process. The MPE technique is of relatively wide application as it can be used for aqueous samples, solid samples and gaseous samples. Depending on the type of sample the extraction is performed with the membrane in direct contact with the sample or in contact with its headspace. The MPE-GC technique is very useful in trace analysis, due to the time-dependent enrichment of the analyte. A typical application of MPE-GC is the analysis of VOCs present in water that may be accomplished with detection limits at the low ppb (mugL-1) level.

Estudo de alguns compostos organolantanídeos: [LnCp2Cl.PPh3]

In this work we present the synthesis and characterization of some organolanthanide compounds [LnCp2Cl.PPh3], Ln = La, Nd, Eu, Yb and Lu. The catalytic activity of these compounds has been verified in cyclohexene hydrogenation. Cyclohexane was identified by¹H NMR analysis in the reaction products.

Componentes voláteis do café torrado. Parte II. Compostos alifáticos, alicíclicos e aromáticos

This review is about the aliphatic, alicyclic and aromatic compounds (non-heterocyclic compounds) that are present in the volatile fractions of roasted coffees. Herein, the contents, aroma precursors and the sensorial properties of volatile phenols, aldehydes, ketones, alcohols, ethers, hydrocarbons, carboxylic acids, anhydrides, esters, lactones, amines and sulphur compounds are discussed. Special attention is given to the compounds of these groups that are actually important to the final aroma of roasted coffees.

RMN 2D: Detecção inversa e gradiente de campo na determinação estrutural de compostos orgânicos

A view of the general aspects involving the 2D NMR spectroscopy using inverse detection and field gradient techniques is presented through the analysis of a sesquiterpene.

Compostos de mercúrio. Revisão de métodos de determinação, tratamento e descarte

This review article on mercury compounds deals with the differences on toxicity of different forms of this metal, the Brazilian regulation for its disposal and the usual methods of determination. Besides that, the text gives special emphasis on the methods used for the treatment and disposal of residues containing mercury, as well as the new developments being made in this area.

Sobre a aplicabilidade da termogravimetria para a estimativa de parâmetros termoquímicos de compostos de coordenação: os elementos lantanídicos

By using thermochemical data reported for a series of chelates of the type [Ln(thd)3], thd = 2, 2, 6, 6 ­ tetramethyl- 3,5-heptanedione and Ln = La, Pr, Nd, Sm, Gd, Tb, Ho, Er, Tm and Yb, empirical correlations were found involving thermochemical parameters (e.g. dissociation enthalpy) and the thermodynamic temperatures of the beginning of thermal degradation of the chelates, t i. It is shown that t i values are of capital importance in the study of this all class of coordination compounds. Among others, the empirical equation is obtained: r3+ = (-0,013.Z + 1,36)/0,005, that relates the lanthanide cation radius (pm) with the atomic number of the element. The remarkable fact is that this equation is achieved by using thermogravimetric and calorimetric parameters. Is also shown that t i values are related with the P(M) function values, which are very close related with the energy difference, deltaE, between the lowest electronic energy level of the f n s²d¹ configuration and the lowest energy level of the f n+1s² configuration in the neutral gaseous atoms.

Análise por difração de raios x de filmes de óxidos cerâmicos compostos por IrO2/TiO2/CeO2

Independent of the sample form (powder or film), XRD analysis of Ir0,3Ti(0,7-x)Ce xO2, (nominal) mixtures, for x=0, shows the formation of a solid solution phase between IrO2 and TiO2, as well as the rutile phases of IrO2 and TiO2. The presence of the anatase phase of TiO2 is also confirmed. The introduction of 30 mol% CeO2 in the mixture reveals the presence of the CeO2 and Ce2O3 phases, besides the already mentioned ones, in the powder. In the film form, however, an amorphous phase is identified. When all of the TiO2 is substituded by CeO2, for both sample forms, the only phases found are IrO2, CeO2 and Ce2O3. This result suggests cerium oxides are not capable of forming solid solutions with either IrO2 or (Ir,Ti)O2 acting solely as a dispersant matrix for these phases. These results are consistent with the much higher electrochemically active surface area when CeO2 is introduced in the binary Ti/Ir0,3Ti0,7O2 mixture. It was possible to establish a relationship between the electrochemical stability of the supported films and their crystalline structure. The unexpected presence of TiO2 and Ti2O3 in the Ti/Ir0,3Ce0,7O2 (film sample) is attributed to oxidation of the Ti support during the calcination step.

Análise dos álcoois, ésteres e compostos carbonílicos em amostras de óleo fúsel

Analysis of alcohols, esters and carbonyl compounds were performed using HRGC and HPLC techniques in samples of fusel oils from three different Brazilian alcohol distilleries. High content of isoamyl alcohol (390 g.L-1), isobutyl alcohol (158 g.L-1), ethyl alcohol (28,4 g.L-1), methyl alcohol (16,6 g.L-1) and n-propyl alcohol (11,9 g.L-1) were found. These compounds represent 77 ± 8 % of the approximated weight of a liter of fusel oils. The obtained results show the feasibility of using fusel oils as low-cost raw material for the synthesis of chemicals.