Relatório de estágio de educação física realizado na Escola Secundária de Francisco Franco

Este relatório visa analisar criticamente todas as ações que foram concretizadas durante o estágio pedagógico, realizado ao longo do ano letivo 2014/15, na Escola Secundária de Francisco Franco. O estágio pedagógico é constituído por diversas componentes. A prática letiva foi a mais extensa, sendo que as tarefas docentes implicaram a gestão do processo ensino-aprendizagem durante as fases de pré-impacto, impacto e pós-impacto. A assistência às aulas constituiu uma mais-valia para adquirirmos competências enquanto observadores, e para confrontarmos outras estratégias e modelos de ensino. Além da prática letiva, há a considerar outras componentes curriculares, nomeadamente a caracterização da turma e o estudo de caso. As restantes componentes surgem como complementos curriculares, tais como a atividade de extensão curricular, ação de intervenção na comunidade escolar e as atividades de natureza científico-pedagógica. O presente relatório é constituído por 10 capítulos, nos quais procuramos analisar criticamente as atividades referenciadas nos dois parágrafos anteriores. Não pretendemos que seja encarado como o mero descritivo da soma das várias ações, mas sim como uma ação global que ocorreu em vários níveis de intervenção, todos eles com um considerável contributo para a nossa formação docente. A elaboração deste relatório não pretende emergir como uma ode ao trabalho realizado no decurso do ano letivo, mas almeja enquadrar e analisar criticamente esse mesmo trabalho, justificando as decisões tomadas e apresentando sugestões, com vista à melhoria do caminho que percorrido.

Relatório de estágio de educação física da Universidade da Madeira na Escola Básica e Secundária Dr. Ângelo Augusto da Silva

No processo para obter habilitações para a função docente realizámos o estágio pedagógico na Escola Básica e Secundária Dr. Ângelo Augusto da Silva. O presente trabalho tem como objetivo descrever e analisar criticamente o mesmo. O estágio pedagógico caracteriza-se por um conjunto muito abrangente de atividades que procura conferir competências como docentes e investigadores ativos. Desenvolvemos, ao longo do ano letivo de 2014/2015, tarefas incluídas no estágio pedagógico tais como a prática letiva, a observação de aulas, a caracterização da turma, o estudo de caso, a atividade de extensão curricular, a atividade de intervenção na comunidade escolar e duas atividades de natureza científico-pedagógica - uma individual e outra coletiva. Estivemos envolvidos desde o planeamento até à concretização das atividades onde definimos estratégias de organização e de intervenção que foram, no final, analisadas e discutidas criticamente identificando principais dificuldades, opções para as ultrapassar e competências adquiridas. O relatório está dividido em seis secções: enquadramento do estágio pedagógico, onde contextualizamos um conjunto de situações essenciais para melhor compreensão das opções tomadas; a prática letiva que expressa o nosso trabalho desenvolvido junto da turma enquanto docentes e onde são expressas estratégias pedagógico-didáticas utilizadas e reflexões sobre as mesmas; a assistência às aulas do colega de estágio que nos permitiu identificar e analisar a nossa evolução e do colega, ao longo do ano letivo. Na seção seguinte estão presentes as atividades que nos permitiram conhecer melhor os alunos e, assim, adequar estratégias de acordo com as suas necessidades: caracterização da turma, atividade de extensão curricular e estudo de caso. Posteriormente apresentamos a atividade de intervenção na comunidade identificando a interação entre os professores estagiários e a restante comunidade escolar. As atividades de cariz científico-pedagógico apresentam-se de seguida e foram desenvolvidas como meio de promover a contínua formação dos professores. Por fim apresentamos as conclusões.

Obtenção e caracterização de nanopartículas de argilominerais

Natural nanoclays are of great interest particularly for the production of polymer-based nanocomposites. In this work, kaolinite clays from two natural deposits in the State of the Rio Grande do Norte and Paraiba were purified with thermal treatment and chemical treatments, and characterized. Front to the gotten data, had been proposals methodologies for elimination or reduction of coarse particle texts, oxide of iron and organic substance. These methodologies had consisted of the combination of operations with thermal treatments, carried through in electric oven, and acid chemical attacks with and hydrogen peroxide. The Analyzers Thermogravimetric was used to examine the thermal stability of the nanoclays. The analysis indicated weight losses at temperatures under 110 ºC and over the temperature range of 350 to 550 ºC. Based on the thermal analysis data, the samples were submitted to a thermal treatment at 500 °C, for 8 h, to remove organic components. The X-ray diffraction patterns indicated that thermal treatment under 500 °C affect the basic structure of kaolinite. The BET surface area measurements ranged from 32 to 38 m2/g for clay samples with thermal treatment and from 36 to 53 m2/g for chemically treated samples. Thus, although the thermal treatment increased the surface area, through the removal of organic components, the effect was not significant and chemical treatment is more efficient, not affect the basic structure of kaolinite, to improve particle dispersion. SEM analysis confirms that the clay is agglomerated forming micron-size particles

Atividade física na terceira idade: Uma análise de sua contribuições para o estilo de vida através das representações sociais

Temáticas emergentes e estratégicas da política de saúde em nível mundial têm suscitado reflexões para ações sócio educativas com idosos. Esta pesquisa questiona as aspirações desse segmento social face às experiências de qualidade proporcionadas pela atividade física. Objetivo: investigar as representações sociais da atividade física na terceira idade. Método: pesquisa de corte transversal com abordagem quanti-qualitativa. A amostra foi nãoprobabilística e por conveniência apoiada na Teoria das Representações Sociais e a Teoria do Núcleo Central. O estudo foi realizado com alunos de um projeto para a terceira idade com sede no Centro Federal de Educação Tecnológica do Rio Grande do Norte (CEFET), no município de Natal/RN, Brasil. Para a coleta dos dados utilizou-se de questionário semi-estruturado, composto de três partes: A Parte I, para a caracterização social da amostra e identificação da percepção da atividade física para a saúde; a Parte II, com evocação livre de palavras e a Parte III, com uma questão aberta. Análise dos dados: A exploração do material deu-se a partir dos seguintes softs: do SPSS para análise de freqüência simples (parte I); do EVOC (parte II) e do ALCESTE (parte III). Complementarmente, foi utilizada a análise de conteúdo a fim de inferir/corroborar sobre os núcleos de sentido da comunicação. Resultados: O núcleo central da representação foi composto por felicidade/saúde/dança e ginástica, revelando diferentes entendimentos e mostrando também que o conhecimento construído da atividade física assume um papel preponderante na vida de idosos, adquirindo gradativamente, a representação de vida com mais saúde e qualidade na velhice . A composição do núcleo central ao considerar elaborações mentais, emoções, práticas e explicações oriundas do cotidiano que se introduzem na constituição da representação social em foco, poderá influenciar as escolhas e estratégias de se desenvolver melhora nos padrões de saúde e na qualidade de vida dos idosos.

Caracterização ecofisiológica de sementes de espécies lenhosas da Caatinga

Dormancy is an inherent property of the seeds that define the environmental conditions in which they are able to germinate and their presence is an adaptive trait common in species inhabiting semiarid regions. Moreover, the ability of seedling establishment in these environments has been related to the size, strength and chemical characteristics of the seeds. This study investigated patterns of dormancy and germination speed in tree species of the Caatinga, exploring how the seed size influence the processes of germination, seedling size and biomass allocation. In addition, we aim to investigate the chemical characteristics of the reserves, to verify a possible relationship between nutritional content and the process of seed germination. Therefore, seeds were collected from ten species of woody Caatinga for tests of breaking dormancy, germination and biochemical characterization. Overall, the results show that the scarification treatments mechanical and chemical, and thermal shock influenced the percentage and speed of germination in 50 % of the species, suggesting that they have some level of physical dormancy in the seeds. Biochemical characterization showed the existence of large amounts of carbohydrates in the seeds of all species, low proportion of protein and low amounts of neutral lipids. Using linear regression, we demonstrated the existence of a significant relationship between seed size and the ratio of root/shoot where the largest seeds invested a greater amount of resources for shoot growth. The relationship between germination speed and non-reducing sugar content was also significant, so these compounds is related to the maintenance of physiological seed quality. These results confirm some relationships discussed in the literature for cultivated species, but can be applied to the species native to the Caatinga

Análise da Conformidade e Caracterização da Matéria- Prima Empregada na Fabricação de Blocos Cerâmicos na Região Metropolitana de Salvador

The potential market of the metropolitan area of Salvador accounts for the estimated consumption of roughly 800 million horizontally perforated extruded clay bricks a year. The growing demand of consumers along with the competitiveness of the structural ceramic sector has driven forward a number of recent efforts and investments towards improving the quality of structural ceramics. In this scenario, the present study focused on sampling and evaluating the conformity of 8-hole horizontally perforated extruded clay bricks manufactured by different plants (A, B and C) in the metropolitan area of Salvador. In addition, representative clay and sandy-clay materials were collected from each plant and characterized by conventional physical, chemical and mineralogical techniques. Finally, experimental compositions designated as A, B and C, according to the source, were prepared by mixing different contents of the raw materials collected in the plants, fired at different temperatures and characterized. The results revealed a series of non conformities regarding ABNT guidelines. The characterization of raw materials revealed the presence of kaolinite and ilite in concentrations ranging from 64 to 90 wt.% along with free quartz (10 - 25%). The sandy-clay samples consisted basically of kaolinite. All raw materials depicted low contents of organics, amorphous constituents, alkaline oxides and feldspar. An analysis of the firing behavior of all different ceramic compositions revealed that the linear contraction of composition A was rather significant considering the temperature range evaluated, and it justifies the significant dimensional non conformity that was shown by bricks made with the ceramic A

A desistência de alunos na licenciatura em física no Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN): causas e sugestões para o combate

This dissertation proposes studying the issue of withdrawal undergraduate in physics at the Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN) and collaborate with suggestions for dealing with this problem. The first chapter begins with an overview of two significant problems in the Brazilian educational system: the high dropout rates in degrees in physics and the lack of teachers with specific training in this science. Then, we discuss the relevance of this research to the area of physics teaching, as well as justify its completion as part of a professional master's degree. After, we present a proper definition for the term withdrawal, which is based on the existing problem in the IFRN. And, in the same chapter, we explicitly the focus, the objectives and the methodological aspects of this work. The results obtained in our investigation are presented in next four chapters. In the second chapter of this dissertation, we present: a brief history of the creation of IFRN degree in physics, the functioning of this course and the foundation of classrooms 2004.2 and 2006.1. We also show a kind of map of the withdrawal of the groups investigated (the dropout rate was 84.4% in both groups) and an analysis of the relationship between the curricula of each of them and the number of dropouts. In the third chapter, we display a descriptive statistics of the students which dropout and found that the largest dropout occurred with students who are women, married, parents of one kid; workers, joined with a minimum age of 23 years and completed high school at least 6 years. Then in the fourth chapter, we reveal and discuss the students' reports on the causes of their dropout. From the data presented, we can say that the answer to the question "What was the main reason for your dropout?" Is mainly in personal injury claims: another option for upper-level course and lack of time to devote to the course. In the fifth chapter, we show the results related to teacher s opinions about the phenomenon in question. We detected three main causes for the abandonment, according to teachers: the lack of dedication, the lack of interest and lack of integration in the course. In the sixth and final chapter, we discuss the results and present our conclusion and the proposed report - the product of this dissertation, presented as Annex. This report contains mainly suggestions for curricular and institutional actions that can contribute to reducing the dropout degree in Physics in the IFRN. The main actions suggested are: implementation of the curriculum in disciplines, implementation of programs or actions to combat this poor content of basic training, implementation of specific programs or actions for the student worker, and dissemination of IFRN degree in physics in schools through seminars or workshops

Análise da reprodutibilidade de parâmetros no domínio da frequência do sinal EMG utilizados na caracterização da fadiga muscular localizada

The aim of this study was to analyze the reproducibility of the electromyography signal's parameters (EMG) in the frequency domain used in the characterization of localized muscle fatigue. Fifteen male subjects underwent a fatigue test based on isometric knee extension, being held at three different times at intervals of seven days. To assess the reproducibility of data between the tests we calculated the correlation coefficient (ICC) for the median frequency (MF) in total exercise time (MFT), MF obtained for every 10% of exercise time (MF10%) and the powers of the frequency bands obtained by dividing the power spectrum at windows of 20 Hz. The results showed: (1) excellent reproducibility for MFT, (2) good reproducibility for MF10%, and (3) greater variation in the signal EMG bands from 20 to 120 Hz, especially at the bands of 20-40 Hz and 40-60 Hz, which showed greater sensitivity to the process of muscle fatigue. We conclude that the MF is a variable that shows good reproducibility and that the fragmented analysis of the power spectrum, by means of frequency bands, showed that significant variations occur in the EMG signal during the installation of the fatigue process, having potential to become a new method for the characterization of localized muscle fatigue.

Ondaletas e movimento browniano fracionário: aplicação à caracterização de poços de petróleo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Propriedades física de molécilas orgânicas e compostos do tipo perovskita CdSiO3 e CaPbO3

In the first part of this work our concern was to investigate the thermal effects in organic crystals using the theory of the polarons. To analyse such effect, we used the Fröhlich s Hamiltonian, that describes the dynamics of the polarons, using a treatment based on the quantum mechanics, to elucidate the electron-phonon interaction. Many are the forms to analyzing the polaronic phenomenon. However, the measure of the dielectric function can supply important information about the small polarons hopping process. Besides, the dielectric function measures the answer to an applied external electric field, and it is an important tool for the understanding of the many-body effects in the normal state of a polaronic system. We calculate the dielectric function and its dependence on temperature using the Hartree-Fock decoupling method. The dieletric function s dependence on the temperature is depicted by through a 3D graph. We also analyzed the so called Arrhenius resistivity, as a functionof the temperature, which is an important tool to characterize the conductivity of an organic molecule. In the second part we analyzed two perovskita type crystalline oxides, namely the cadmium silicate triclinic (CdSiO3) and the calcium plumbate orthorhombic (CaPbO3), respectively. These materials are normally denominated ABO3 and they have been especially investigated for displaying ferroelectric, piezoelectric, dielectrics, semiconductors and superconductors properties. We found our results through ab initio method within the functional density theory (DFT) in the GGA-PBE and LDA-CAPZ approximations. After the geometry optimization for the two structure using the in two approximations, we found the structure parameters and compared them with the experimental data. We still determined further the angles of connection for the two analyzed cases. Soon after the convergence of the energy, we determined their band structures, fundamental information to characterize the nature of the material, as well as their dielectrics functions, optical absorption, partial density of states and effective masses of electrons and holes

Desenvolvimento e caracterização de dispositivos para reposição de filmes finos por descarga em cátodo oco

In the present work we use a plasma jet system with a hollow cathode to deposit thin TiO2 films on silicon substrates as alternative at sol-gel, PECVD, dip-coating e magnetron sputtering techniques. The cylindrical cathode, made from pure titanium, can be negatively polarized between 0 e 1200 V and supports an electrical current of up to 1 A. An Ar/O2 mixture, with a total flux of 20 sccm and an O2 percentage ranging between 0 and 30%, is passed through a cylindrical hole machined in the cathode. The plasma parameters and your influence on the properties of deposited TiO2 films and their deposition rate was studied. When discharge occurs, titanium atoms are sputtered/evaporated. They are transported by the jet and deposited on the Si substrates located on the substrate holder facing the plasma jet system at a distance ranging between10 and 50 mm from the cathode. The working pressure was 10-3 mbar and the deposition time was 10 -60 min. Deposited films were characterized by scanning electron microscopy and atomic force microscopy to check the film uniformity and morphology and by X-ray diffraction to analyze qualitatively the phases present. Also it is presented the new dispositive denominate ionizing cage, derived from the active screen plasma nitriding (ASPN), but based in hollow cathode effect, recently developed. In this process, the sample was involved in a cage, in which the cathodic potential was applied. The samples were placed on an insulator substrate holder, remaining in a floating potential, and then it was treated in reactive plasma in hollow cathode regime. Moreover, the edge effect was completely eliminated, since the plasma was formed on the cage and not directly onto the samples and uniformity layer was getting in all sampl

Caracterização magnética e estrutural de filmes depositados por gaiola catódica

Iron nitrite films, with hundred of nanometers thick, were deposited using the Cathodic cage plasma nitriding method, with a N2/H2 plasma, over a common glass substract. The structure, surface morphology and magnetic properties were investigated using X-ray diffractometry (XRD), atomic force microscopy (AFM) and vibrating sample magnetometer (VSM). XRD shows the formation of γ FeN phase and a combination of ζFe2N + ɛFe3N phases. The film s saturation magnetization and coercivity depends on morphology, composition, grain size and treatment temperature. Temperature raising from 250 ºC to 350 ºC were followed by an increase in saturation magnetization and film s surface coercivity on the parallel direction in relative proportion. This fact can be attributed to the grain sizes and to the different phases formed, since iron rich fases, like the ɛFe3N phase, emerges more frequently on more elevated treatment s temperature. Using this new and reasonably low cost method, it was possible to deposit films with both good adhesion and good magnetic properties, with wide application in magnetic devices

Validação do questionário Internacional de Atividade Física (IPAQ) através da acelerometria em idosas

Physical activity is one of the main components of a healthy lifestyle, responsible for many health benefits. Despite being considered important for both disease prevention and health promotion there is high prevalence of sedentary behavior in the elderly population. Questionnaires are practical and feasible instruments for assessing levels of physical activity. However, they may have limitations in older age ranges. Accelerometers, movement sensors that make physical activity data more objective, emerge as reliable measuring devices. Aim: Determine the validity of the International Physical Activity Questionnaire (IPAQ) adapted for elderly with accelerometry in elderly women. Methods: 57 elderly women, with mean age of 66.05 ± 5.98 years who took part in hypertension control and physical activity incentive programs were assessed in relation to objective and subjective measures of physical activity. The accelerometer was used for 07 consecutive days, 24 hours per day before the IPAQ was applied. Data were analyzed using measures of central tendency and dispersion to characterize the sample according to variables collected. To check the validity of the data we used the Spearman correlation test, considering a significance level of p <0.05. Results: With respect to the categories of physical activity obtained by IPAQ, 46.4% developed moderate physical activity, followed by a high (30.3%) and low level (23.2%). There was a negative correlation only between self-reported time spent sitting and time spent on light activities as measured by accelerometry (r = - 0.408; p = 0.003) and mean activity level (counts/min) with physical activity levels evaluated by IPAQ (r = 0.297; p = 0.036). Conclusion: The IPAQ used in elderly women shows moderate to low validity levels according to accelerometry measures. Assessment of sedentary activities exhibited acceptable levels compared to accelerometry; however, moderate (r = 0.096; p > 0.05) to vigorous (r = 0.098; p > 0.05) activities were not correlated, demonstrating the inability of IPAQ to evaluate this type of activity in elderly women

Construção de um sistema de caracterização das propriedades de transporte de filmes finos pelo efeito Hall

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Membranas de quitosana micro e macroporosas : preparo, caracterização e estudos de permeabilidade

Two methodologies were proposed to obtain micro and macroporous chitosan membranes, using two different porogenic agents. The methodologies proved to be effective in control the porosity as well as the pore size. Thus, microporous membranes were obtained through the physical blend of chitosan and polyethylene oxide (PEO) on an 80:20 (m/m) ratio, respectively, followed by the partial PEO solubilization in water at 80 ◦C. Macroporous chitosan membranes with asymmetric morphology were obtained using SiO2 as the porogenic agent. In this case, chiotsan-silica ratios used were 1:1, 1:3 and 1:5 (m/m). Membranes characterization were carried out by SEM (scanning electronic microscopy), X-ray diffraction, Fourier Transform Infrared Spectroscopy (FTIR), Thermal analysis (TG, DTG , DSC and DMTA). Permeability studies were performed using two model drugs: sodium sulfamerazine and sulfametoxipyridazine. By transmission FTIR it was possible to confirm the complete removal of SiO2. The SEM images confirmed the porous formation for both micro and macroporous membranes and also determined their respective sizes. By thermal analysis it was possible to show differences related with water sorption capacity as well as thermal stability for both membranes. DTG and DSC allowed evidencing the PEO presence on microporous membranes. The absorbance x time curves obtained on permeability tests for micro and macroporous membranes showed a linear behavior for both drugs in all range of concentration used. It was also observed, through P versus C curves, an increase in permeability of macroporous membranes according to the increase in porosity and also a decrease on P with increase in drug concentration. The influences of the drug molecular structure, as well as test temperatures were also evaluated