Optimisation techniques for planning automatic under frequency load shedding in New Zealand’s power system

Electricity generation is vital in developed countries to power the many mechanical and electrical devices that people require. Unfortunately electricity generation is costly. Though electricity can be generated it cannot be stored efficiently. Electricity generation is also difficult to manage because exact demand is unknown from one instant to the next. A number of services are required to manage fluctuations in electricity demand, and to protect the system when frequency falls too low. A current approach is called automatic under frequency load shedding (AUFLS). This article proposes new methods for optimising AUFLS in New Zealand’s power system. The core ideas were developed during the 2015 Maths and Industry Study Group (MISG) in Brisbane, Australia. The problem has been motivated by Transpower Limited, a company that manages New Zealand’s power system and transports bulk electricity from where it is generated to where it is needed. The approaches developed in this article can be used in electrical power systems anywhere in the world.

Low Power continuous time common mode sensing for common mode feedback circuits

Continuous common mode feedback (CMFB) circuits having high input impedance and low distortion are proposed. The proposed circuits are characterized for 0.18 mu m CMOS process with 1.8 V supply. Simulation results indicate that the proposed common mode detector consumes no standby power and CMFB circuit consumes 27-34% less power than previous high swing CMFB circuits.

Three-Dimensional simulation of deformation fields underneath vickers indenter:Effects of power-law Plasticity

The effects of power-law plasticity (yield strength and strain hardening exponent) on the plastic strain distribution underneath a Vickers indenter was systematically investigated by recourse to three-dimensional finite element analysis, motivated by the experimental macro-and micro-indentation on heat-treated Al-Zn-Mg alloy. For meaningful comparison between simulated and experimental results, the experimental heat treatment was carefully designed such that Al alloy achieve similar yield strength with different strain hardening exponent, and vice versa. On the other hand, full 3D simulation of Vickers indentation was conducted to capture subsurface strain distribution. Subtle differences and similarities were discussed based on the strain field shape, size and magnitude for the isolated effect of yield strength and strain hardening exponent.

Strategies for Power Line Communications Smart Metering Network Deployment

Smart Grids are becoming a reality all over the world. Nowadays, the research efforts for the introduction and deployment of these grids are mainly focused on the development of the field of Smart Metering. This emerging application requires the use of technologies to access the significant number of points of supply (PoS) existing in the grid, covering the Low Voltage (LV) segment with the lowest possible costs. Power Line Communications (PLC) have been extensively used in electricity grids for a variety of purposes and, of late, have been the focus of renewed interest. PLC are really well suited for quick and inexpensive pervasive deployments. However, no LV grid is the same in any electricity company (utility), and the particularities of each grid evolution, architecture, circumstances and materials, makes it a challenge to deploy Smart Metering networks with PLC technologies, with the Smart Grid as an ultimate goal. This paper covers the evolution of Smart Metering networks, together with the evolution of PLC technologies until both worlds have converged to project PLC-enabled Smart Metering networks towards Smart Grid. This paper develops guidelines over a set of strategic aspects of PLC Smart Metering network deployment based on the knowledge gathered on real field; and introduces the future challenges of these networks in their evolution towards the Smart Grid.

Experimental and numerical study on power consumptions in a double-tube-socket pneumatic conveying system

A new methodology is proposed in this paper to predict the lowest power consumption for a double-tube-socket (DTS) pneumatic conveying system. This methodology is established on both experimental work and numerical simulation. After parametric studies by numerical simulation, the desired conveying cases which have the lowest power consumption were obtained. Finally those cases were carried out in our experimental system. The measured power consumption was close to that predicted. In this paper the experimental work is discussed and the numerical simulation introduced. (c) 2010 Elsevier B.V. All rights reserved.

Investment incentives and valuation of power sector infrastructure assets with increasing interconnection, intermittency and decarbonisation

This dissertation applies a variety of quantitative methods to electricity and carbon market data, utility company accounts data, capital and operating costs to analyse some of the challenges associated with investment in energy assets. In particular, three distinct research topics are analysed within this general theme: the efficiency of interconnector trading, the optimal sizing of intermittent wind facilities and the impact of carbon pricing on the cost of capital for investors are researched in successive sections.

Dispossessing bare life: Towards a theoretical framework for examining power relations through economic development at the 2010 FIFA World Cup in South Africa

In the past twenty years an increasing number of Global South nations have vied for the rights to host prestigious and expensive sport mega events. This trend requires significant reflection given the enormous economic costs of these events, which often produce little capital gain for the host nation (Whitson & Horne, 2006). Furthermore, sport mega events are often utilized for their symbolic capital (Belanger, 2009), which sometimes manifests through forcing people from their land for the sake of “beautification” (Davis, 2006). In this project, then, I asked how technologies of power were utilized by FIFA, corporate stakeholders, and the South African government to control people who were marginal to, or impeded the success of, the World Cup in Nelspruit, South Africa. This project consisted of two parts: the first involved constructing a theoretical framework for better understanding power as it operates through sport mega events in general. To this end I employed Marxian notions of the ordering of physical space, Foucauldian conceptions of sovereignty and governmentality, and Agamben’s (1998) state of exception to determine how particular bodies are constituted and controlled through sport mega events. In the second part, I applied this theoretical framework to the events in South Africa to better elucidate how people became displaced and killed because of the 2010 FIFA World Cup. I used South African popular news and documentaries as empirical evidence and conducted a discursive analysis of said news media. Through this coverage it became apparent that the mega event created the conditions in which new forms of rogue sovereign partnerships could arise through a historically and spatially contingent process of capitalism. The rogue sovereigns’ para-juridico-political orders, the discourses and practices of accumulation by dispossession as a tactic and effect of govermentality, and other historical non-capital subjectivities such as racial identity, all contributed to constituting Agamben’s state of exception in which people could be displaced, killed or left to die in the events surrounding the World Cup.

REDUCING DIESEL DEPENDENCE IN NUNAVUT: INTEGRATING RENEWABLE ENERGY TECHNOLOGIES THROUGH POLICY ACTIONS

In the last fifty years, Nunavut has developed a deep dependence on diesel for virtually all of its energy needs, including electricity. This dependence has created a number of economic, environmental and health related challenges in the territory, with an estimated 20% of the territory’s annual budget being spent on energy, thereby limiting the Government of Nunavut’s ability to address other essential infrastructure and societal needs, such as education, nutrition and health care and housing. One solution to address this diesel dependency is the use of renewable energy technologies (RETs), such as wind, solar and hydropower. As such, this thesis explores energy alternatives in Nunavut, and through RETScreen renewable energy simulations, found that solar power and wind power are technically viable options for Nunavut communities and a potentially successful means to offset diesel-generated electricity in Nunavut. However, through this analysis it was also discovered that accurate data or renewable resources are often unavailable for most Nunavut communities. Moreover, through qualitative open-ended interviews, the perspectives of Nunavut residents with regards to developing RETs in Nunavut were explored, and it was found that respondents generally supported the use of renewable energy in their communities, while acknowledging that there still remains a knowledge gap among residents regarding renewable energy, stemming from a lack of communication between the communities, government and the utility company. In addition, the perceived challenges, opportunities and gaps that exist with regards to renewable energy policy and program development were discussed with government policy-makers through further interviews, and it was discovered that often government departments work largely independently of each other rather than collaboratively, creating gaps and oversights in renewable energy policy in Nunavut. Combined, the results of this thesis were used to develop a number of recommended policy actions that could be undertaken by the territorial and federal government to support a shift towards renewable energy in order to develop a sustainable and self-sufficient energy plan in Nunavut. They include: gathering accurate renewable resource data in Nunavut; increasing community consultations on the subject of renewable energy; building strong partnerships with universities, colleges and industry; developing a knowledge sharing network; and finally increasing accessibility to renewable energy programs and policies in Nunavut.

Technology and the architecture of markets: re-configuring the Canadian equity market

This paper examines the relation between technical possibilities, liberal logics, and the concrete reconfiguration of markets. It focuses on the enrolling of innovations in communication and information technologies into the markets traditionally dominated by stock exchanges. With the development of capacities to trade on-screen, the power of incumbent market makers has been challenged as a less stable array of competing quasi-public and private marketplaces emerges. Developing a case study of the Toronto Stock Exchange, I argue that narrative emphasis on the performative power of sociotechnical innovations, the deterritorialisation of financial relations, and the erosion of state capacities needs qualification. A case is made for the importance of developing an understanding of: the spaces of encounter between emerging social technologies and property rights, rules of exchange, and structures of governance; and the interplay of orderings of different institutional composition and spatial reach in the reconfiguration of market architectures. Only then can a better grasp be gained of the evolving dynamics between making markets, the regulatory powers of the state, and their delimitations.

A Study of the Development of the Ability of the Archives Department of the Hudson's Bay Company to Carry Out Document Repairs

The objective of this thesis was to determine whether the establishment and operation of an archives services by the Hudson's Bay Company had an effect on the company's ability to carry out document repairs. Data collection methods included reviews of published material, archival records of the Hudson's Bay Company, and semi-structured interviews. The study found that the Hudson's Bay Company's commitment to operating a modern archives service in accordance with accepted archive administration practices had a substantial effect on its ability to carry out document repairs. The principled approach to repair, as practiced by the Public Record Office, was a major influence. A review of secondary sources placed this development squarely within the context of archival developments in 20th century England. Overall, the thesis findings add to the growing conversation about conservation history in England, in particular, archive conservation history as it occurred outside of the Public Record Office in the 20th century, by discussing how some methods of repair that were devised, adopted and extended by the Public Record Office in the 19th and 20th centuries were adopted and applied in the 20th century by a well-established business corporation.

Radical Change, Accounting and Public Sector Reforms: A Comparison of Italian and Canadian Municipalities

NPM has been generally regarded as an administrative reform for which resilience and consequences have been mainly investigated at a country level. Although accounting played a central role in NPM reforms over the last decades, how accounting change actually took place, and through what organizational dynamics, has been under-investigated. This paper adopts a new perspective, archetype theory, and looks into how intra-organizational dynamics (values, interests, power, capabilities) combine with reform processes to influence the outcome of accounting change. Evidence from Italian (disruptive process) and Canadian (sedimented process) municipalities shows that radical change is associated with specific configurations of intra-organizational dynamics.

Sharing Power: The Case for Public Consultations in Trade

Since the 1960s, public consultation has emerged as an important democratic tool, allowing governments to inform, debate, and learn from the general public. Since the 1980s, international trade agreements have wielded significant influence over domestic law making, as an ever more ‘comprehensive’ set of topics are regulated via treaty. In Canada, these two trends have yet to meet. Neither public nor Parliament is involved in trade policy making raising concerns about the democratic legitimacy of expansive trade agreements. Through the lens of the recent Canada-EU CETA, this article examines whether trade law’s consultation practices can be aligned with those of other federal government departments. We identify five key values that make consultations successful—diversity, education, commitment, accountability, and transparency—and consider the viability of their inclusion in trade consultations.

The role of demand response in future power systems

Power systems are planed and operated according to the optimization of the available resources. Traditionally these tasks were mostly undertaken in a centralized way which is no longer adequate in a competitive environment. Demand response can play a very relevant role in this context but adequate tools to negotiate this kind of resources are required. This paper presents an approach to deal with these issues, by using a multi-agent simulator able to model demand side players and simulate their strategic behavior. The paper includes an illustrative case study that considers an incident situation. The distribution company is able to reduce load curtailment due to load flexibility contracts previously established with demand side players.

Cardiovascular health risk profiling of Niagara Region grade 9 students : implications for elementary curriculum /

The purpose of this study was to determine if Ontario's health and physical education curriculum contributes sufficiently to ensure the health of our children and young adults. To determine the curriculum effect, the health risk profile of Niagara Region's grade 9 students was compared to Canada's adolescent population. All subjects completed a "Heart Health Lifestyle" survey and were measured for height, weight, percent body fat, blood pressure, and total cholesterol and performed the 20-metre shuttle run test as part of their physical and health education classes. The Niagara Region grade 9 population had a healthy risk profile. Aerobic power was inversely related, and cholesterol levels were positively associated to body mass index and percent body fat in the whole group analysis. These results indicate that physical education can offer unique and essential aspects allowing individuals a means to learn and control body movements and keep physically fit while providing protection against modern disease. Ontario's health and physical education curriculum does contribute to the health of our children and adolescents; however, there is a need to implement a stronger mandate for daily vigorous physical activity.