An enhanced stability criterion for time-delay systems via a new bounding technique

In the past few years, a great deal of effort has been devoted to improve delay-dependent conditions for stability of linear systems with an interval time-varying delay. To reduce conservatism of stability conditions, in the framework of the Lyapunov-Krasovskii functional (LKF) method, the bounding technique plays a key role. In this paper, a new bounding technique based on a new integral inequality is proposed. By employing the newly bounding technique proposed in this paper, an enhanced stability criterion for a class of linear systems with an interval time-varying delay is derived. The effectiveness and a significant improvement of the obtained results are shown by numerical examples.

Pair trading in Bovespa with a quantitative approach: cointegration, Ornstein-Uhlenbeck equation and Kelly criterion.

Pair trading is an old and well-known technique among traders. In this paper, we discuss an important element not commonly debated in Brazil: the cointegration between pairs, which would guarantee the spread stability. We run the Dickey-Fuller test to check cointegration, and then compare the results with non-cointegrated pairs. We found that the Sharpe ratio of cointegrated pairs is greater than the non-cointegrated. We also use the Ornstein-Uhlenbeck equation in order to calculate the half-life of the pairs. Again, this improves their performance. Last, we use the leverage suggested by Kelly Formula, once again improving the results.

Is there a general criterion for dynamic efficiency?

This paper analyses an overlapping generations model with absolute bequest motive. It is shown that the widely accepted criterion to verify dynamic efficiency does not apply to this case. In our model the social planner maximizes welfare by choosing a capital stock larger than the golden role and a real rate of interest smaller than the rate of growth of the economy.

Test-day milk yield as a selection criterion for dairy buffaloes (Bubalus bubalis Artiodactyla, Bovidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Genetic parameters for an alternative criterion to improve productive longevity of Nellore cows

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physical resistance as a criterion in the selection of foraging material by Acromyrmex subterraneus brunneus Forel, 1911 (Hym., Formicidae)

Leaf-cutting ants forage on a wide variety of plant species using the physical and chemical characteristics of the plants as a selection criterion. In order to determine the influence of the physical factor on the selection of foraging material, inert materials such as floral sponge, polystyrene, plastic and clay, which possess different degrees of physical resistance to cutting, were offered simultaneously to five Acromyrmex subterraneus brunneus colonies, and assessed 12 and 24 h after foraging. No substrate selectivity was observed during foraging. Physical resistance was used as a decision criterion for the incorporation or return of the foraged material. This fact suggests the existence of a second time of selection of the foraged material inside the colony during cultivation of the symbiontic fungus.

Orthogonality criterion for banishing hydrino states from standard quantum mechanics

Orthogonality criterion is used to show in a very simple and general way that anomalous bound-state solutions for the Coulomb potential (hydrino states) do not exist as bona fide solutions of the Schrodinger, Klein-Gordon and Dirac equations. (C) 2007 Elsevier B.V. All rights reserved.

Using the current Brazilian value for the biological exposure limit applied to blood lead level as a lead poisoning diagnostic criterion

Tradicionalmente, os limites de tolerância biológica são utilizados exclusivamente para a promoção e a preservação da saúde dos trabalhadores, não sendo aplicados com fins diagnósticos. Entretanto, com relação a algumas intoxicações profissionais, o assunto é polêmico. Neste artigo, defende-se a utilização do limite de tolerância aplicado atualmente no Brasil à plumbemia como um critério importante para a realização do diagnóstico da intoxicação profissional pelo chumbo. Argumenta-se que, em oposição ao tradicional critério clínico, deve-se abordar o problema do diagnóstico da intoxicação pelo chumbo sob um ponto de vista epidemiológico, utilizando-se o atual valor do limite de tolerância para a plumbemia como um marcador de risco relativo significativamente aumentado.

Influence of the yielding criterion on total forming force in metallic junctions using elastomers

The production of metallic junctions employing elastomers is an unconventional technique that has been in development in the last 20 years. The forming process gets successfull just if a simultaneous compression between the elastomers and the tube takes place. Exact solutions for problems involving forming with elastomers are quite difficult to determine. However, the upper-bound theory can be used in order to predict the necessary load for junctions forming. Thus, it is necessary to develop a model capable to provide an estimate of the total forming force, which is useful to set-up tools and equipments required for the process. In this work, Von Mises, Hill's 1948 and Hill's 1979 associated yielding theories, and the Hosford's theory (1979) as well, were used in order to study the anisotropic behaviour on total forming force of junctions using elastomers, insuring the functionality of the proposed model. (c) 2006 Elsevier B.V. All rights reserved.

Thermoeconomic analysis: A criterion for the selection of cogeneration systems

The economical viability of three cogeneration schemes as supplying alternatives for a hypothetical industrial process has been studied. A cost appropriation method based on Valero's studies (1986) has been used. This method enables the determination of exergetic flows, the Second Law efficiency of equipment and the monetary costs of the products acquired by the industrial process (steam and electrical energy). The criterion adopted for the selection is the global cost of the supplied products to the industrial process as regarding in Brazilian conditions.

Energy criterion to select the behavior of dynamical masses in technicolor models

We propose a quite general ansatz for the dynamical mass in technicolor models. We impose on this ansatz the condition that it should lead to the deepest minimum of energy. This criterion selects a particular form of the technifermion self energy. © 2002 Elsevier Science B.V. All rights reserved.

Towards criterion validity in classroom language analysis: methodological constraints of metadiscourse and inter-rater agreement

This paper reports on a process to validate a revised version of a system for coding classroom discourse in foreign language lessons, a context in which the dual role of language (as content and means of communication) and the speakers' specific pedagogical aims lead to a certain degree of ambiguity in language analysis. The language used by teachers and students has been extensively studied, and a framework of concepts concerning classroom discourse well-established. Models for coding classroom language need, however, to be revised when they are applied to specific research contexts. The application and revision of an initial framework can lead to the development of earlier models, and to the re-definition of previously established categories of analysis that have to be validated. The procedures followed to validate a coding system are related here as guidelines for conducting research under similar circumstances. The advantages of using instruments that incorporate two types of data, that is, quantitative measures and qualitative information from raters' metadiscourse, are discussed, and it is suggested that such procedure can contribute to the process of validation itself, towards attaining reliability of research results, as well as indicate some constraints of the adopted research methodology.

Nonlinear formulation based on FEM, Mazars damage criterion and Fick's law applied to failure assessment of reinforced concrete structures subjected to chloride ingress and reinforcements corrosion

Structural durability is an important design criterion, which must be assessed for every type of structure. In this regard, especial attention must be addressed to the durability of reinforced concrete (RC) structures. When RC structures are located in aggressive environments, its durability is strongly reduced by physical/chemical/mechanical processes that trigger the corrosion of reinforcements. Among these processes, the diffusion of chlorides is recognized as one of major responsible of corrosion phenomenon start. To accurate modelling the corrosion of reinforcements and to assess the durability of RC structures, a mechanical model that accounts realistically for both concrete and steel mechanical behaviour must be considered. In this context, this study presents a numerical nonlinear formulation based on the finite element method applied to structural analysis of RC structures subjected to chloride penetration and reinforcements corrosion. The physical nonlinearity of concrete is described by Mazars damage model whereas for reinforcements elastoplastic criteria are adopted. The steel loss along time due to corrosion is modelled using an empirical approach presented in literature and the chloride concentration growth along structural cover is represented by Fick's law. The proposed model is applied to analysis of bended structures. The results obtained by the proposed numerical approach are compared to responses available in literature in order to illustrate the evolution of structural resistant load after corrosion start. (C) 2014 Elsevier Ltd. All rights reserved.

Systemic risk in dynamical networks with stochastic failure criterion

Complex non-linear interactions between banks and assets we model by two time-dependent Erdos-Renyi network models where each node, representing a bank, can invest either to a single asset (model I) or multiple assets (model II). We use a dynamical network approach to evaluate the collective financial failure -systemic risk- quantified by the fraction of active nodes. The systemic risk can be calculated over any future time period, divided into sub-periods, where within each sub-period banks may contiguously fail due to links to either i) assets or ii) other banks, controlled by two parameters, probability of internal failure p and threshold T-h ("solvency" parameter). The systemic risk decreases with the average network degree faster when all assets are equally distributed across banks than if assets are randomly distributed. The more inactive banks each bank can sustain (smaller T-h), the smaller the systemic risk -for some Th values in I we report a discontinuity in systemic risk. When contiguous spreading becomes stochastic ii) controlled by probability p(2) -a condition for the bank to be solvent (active) is stochasticthe- systemic risk decreases with decreasing p(2). We analyse the asset allocation for the U.S. banks. Copyright (C) EPLA, 2014