Airborne Laser Quantification of Florida Shoreline and Beach Volume Change Caused by Hurricanes

This dissertation combines three separate studies that measure coastal change using airborne laser data. The initial study develops a method for measuring subaerial and subaqueous volume change incrementally alongshore, and compares those measurements to shoreline change in order to quantify their relationship in Palm Beach County, Florida. A poor correlation (R2 = 0.39) was found between shoreline and volume change before the hurricane season in the northern section of Palm Beach County because of beach nourishment and inlet dynamics. However, a relatively high R2 value of 0.78 in the southern section of Palm Beach County was found due to little disturbance from tidal inlets and coastal engineering projects. The shoreline and volume change caused by the 2004 hurricane season was poorly correlated with R2 values of 0.02 and 0.42 for the north and south sections, respectively. The second study uses airborne laser data to investigate if there is a significant relationship between shoreline migration before and after Hurricane Ivan near Panama City, Florida. In addition, the relationship between shoreline change and subaerial volume was quantified and a new method for quantifying subaqueous sediment change was developed. No significant spatial relationship was found between shoreline migration before and after the hurricane. Utilization of a single coefficient to represent all relationships between shoreline and subaerial volume change was found to be problematic due to the spatial variability in the linear relationship. Differences in bathymetric data show only a small portion of sediment was transported beyond the active zone and most sediment remained within the active zone despite the occurrence of a hurricane. The third study uses airborne laser bathymetry to measure the offshore limit of change, and compares that location with calculated depth of closures and subaqueous geomorphology. There appears to be strong geologic control of the depth of closure in Broward and Miami-Dade Counties. North of Hillsboro Inlet, hydrodynamics control the geomorphology which in turn indicates the location of the depth of closure.

Knot/Knotting Practice in Craft and Space

Knot/knotting Practice in Craft and Space is a three part research-creation project that used a study of knotting techniques to locate craft in an expanded field of spatial practice. The first part consisted of practical, studio based exercises in which I worked with various natural and synthetic fibres to learn common knotting techniques. The second part was an art historical study that combined craft and architecture history with critical theory related to the social production of space. The third part was an exhibition of drawing and knotted objects titled Opening Closures. This document unifies the lines inquiry that define my project. The first chapter presents the art historical justification for knotting to be understood as a spatial practice. Nineteenth-century German architect and theorist Gottfried Semper’s idea that architectural form is derived from four basic material practices allies craft and architecture in my project and is the point of departure from which I make my argument. In the second chapter, to consider the methodological concerns of research-creation as a form of knowledge production and dissemination, I adopt the format of an instruction manual to conduct an analysis of knot types and to provide instructions for the production of several common knots. In the third chapter, I address the formal and conceptual underpinnings of each artwork presented in my exhibition. I conclude with a proposal for an expanded field of spatial practice by adapting art critic and theorist Rosalind Krauss’s well-known framework for assessing sculpture in 1960s.

Sydenham Street Revived: A Public Space Experiment

In 2015, the Sydenham Street Revived pop-up park project (SSR) transformed Sydenham Street between Princess and Queen Streets into a temporary pedestrian-only public space. The goal of the project was to test out the idea of permanently pedestrianizing this street section. But what did this urban experiment ultimately prove? Using video footage, photographs, and observations recorded before and during the project, this report analyzes the use of the space in order to evaluate the claim that SSR created a successful public space and to make recommendations for a permanent public space on Sydenham Street. Two research methods were used: quantitative data collection, consisting of headcounts of both pedestrians and stationary users of the space; and a qualitative observational survey, based on the criteria for successful public spaces developed by the Project for Public Spaces. Data collection occurred two days one week prior to the project, and two days during the project, on days that were similar in terms of temperature and weather. The research revealed that the SSR did create a successful public space, although additional research is needed in order to determine how the space would function as a public place throughout different seasons, to study the street closure’s impact on surrounding residents and businesses, and to understand how private commercial activity would influence use. Recommendations for a permanent public space on Sydenham Street include considerations for flexible street design and a continuous, barrier-free surface; ensuring that there is an abundance of places to sit; making opportunities for public and community-created art; and to improve walkability by connecting the grid using a mid-block walkway.

Towards Mapping of Rock Walls Using a UAV-Mounted 2D Laser Scanner in GPS Denied Environments

In geotechnical engineering, the stability of rock excavations and walls is estimated by using tools that include a map of the orientations of exposed rock faces. However, measuring these orientations by using conventional methods can be time consuming, sometimes dangerous, and is limited to regions of the exposed rock that are reachable by a human. This thesis introduces a 2D, simulated, quadcopter-based rock wall mapping algorithm for GPS denied environments such as underground mines or near high walls on surface. The proposed algorithm employs techniques from the field of robotics known as simultaneous localization and mapping (SLAM) and is a step towards 3D rock wall mapping. Not only are quadcopters agile, but they can hover. This is very useful for confined spaces such as underground or near rock walls. The quadcopter requires sensors to enable self localization and mapping in dark, confined and GPS denied environments. However, these sensors are limited by the quadcopter payload and power restrictions. Because of these restrictions, a light weight 2D laser scanner is proposed. As a first step towards a 3D mapping algorithm, this thesis proposes a simplified scenario in which a simulated 1D laser range finder and 2D IMU are mounted on a quadcopter that is moving on a plane. Because the 1D laser does not provide enough information to map the 2D world from a single measurement, many measurements are combined over the trajectory of the quadcopter. Least Squares Optimization (LSO) is used to optimize the estimated trajectory and rock face for all data collected over the length of a light. Simulation results show that the mapping algorithm developed is a good first step. It shows that by combining measurements over a trajectory, the scanned rock face can be estimated using a lower-dimensional range sensor. A swathing manoeuvre is introduced as a way to promote loop closures within a short time period, thus reducing accumulated error. Some suggestions on how to improve the algorithm are also provided.

Impact des techniques de fermeture utérine lors de la césarienne

Contexte: La césarienne est une procédure chirurgicale qui survient dans plus du quart des accouchements en Amérique du Nord. Les techniques chirurgicales de fermeture de l’utérus lors de la césarienne sont variées, influencent la cicatrisation et le risque de complications chez la femme à court et long terme. Il a été suggéré que la fermeture en un plan barré augmentait le risque de rupture de l’utérus et de défaut de cicatrisation de l’utérus. Cependant, en l’absence d’un haut niveau d’évidence, cette technique est toujours pratiquée au Canada et en Amérique du Nord. Objectif: Comparer l’impact des différentes techniques de fermeture de l’utérus lors de la césarienne sur les complications maternelles à court et long terme. Méthode : Trois revues systématiques et méta-analyses d’études observationnelles ou d’essais randomisés contrôlés (ECR) ont été réalisées. La prévalence des défauts de cicatrisation et les issues à court et long terme ont été comparées entre les techniques de fermeture de l’utérus. Par la suite, un essai randomisé contrôlé a évalué trois techniques de fermeture de l’utérus : un plan barré, deux plans barrés et deux plans non barrés excluant la déciduale, chez 81 femmes avec une césarienne primaire élective à ≥ 38 semaines de grossesse. L’épaisseur du myomètre résiduel a été mesurée six mois après la césarienne à l’aide d’une échographie transvaginale et comparée par un test t de Student. Résultats : Les résultats des revues systématiques et méta-analyses ont montré que 37% à 59% des femmes présentaient un défaut de cicatrisation de l’utérus après leur césarienne. Concernant les complications à court terme, les types de fermeture de l’utérus étudiés sont comparables, à l’exception de la fermeture en un plan barré qui est associée à un temps opératoire plus court que celle en deux plans (-6.1 minutes, 95% intervalle de confiance (IC) -8.7 à -3.4, p<0.001). Les fermetures de l’utérus en un plan barré sont associées à plus de risque de rupture utérine qu’une fermeture en deux plans barrés (rapport de cote 4.96; IC 95%: 2.58–9.52, P< 0.001). L’ECR a également démontré que la fermeture de l’utérus en un plan barré était associée à une épaisseur du myomètre résiduel plus mince que la fermeture en deux plans non barrés excluant la déciduale (3.8 ± 1.6 mm vs 6.1 ± 2.2 mm; p< 0.001). Finalement, aucune différence significative n’a été détectée concernant la fréquence des points d’hémostases entre les techniques (p=1.000). Conclusion : Lors d’une césarienne élective primaire à terme, une fermeture en deux plans non barrés est associée à un myomètre plus épais qu’une fermeture en un plan barré, sans augmenter le recours à des points d’hémostase. De plus, il est suggéré que la fermeture en deux plans réduirait le risque de rupture utérine lors d’une prochaine grossesse. Finalement, la fermeture chez les femmes en travail doit être plus étudiée.

Braid groups, mapping class groups, and Torelli groups

This thesis discusses subgroups of mapping class groups of particular surfaces. First, we study the Torelli group, that is, the subgroup of the mapping class group that acts trivially on the first homology. We investigate generators of the Torelli group, and we give an algorithm that factorizes elements of the Torelli group into products of particular generators. Furthermore, we investigate normal closures of powers of standard generators of the mapping class group of a punctured sphere. By using the Jones representation, we prove that in most cases these normal closures have infinite index in the mapping class group. We prove a similar result for the hyperelliptic mapping class group, that is, the group that consists of mapping classes that commute with a fixed hyperelliptic involution. As a corollary, we recover an older theorem of Coxeter (with 2 exceptional cases), which states that the normal closure of the m-th power of standard generators of the braid group has infinite index in the braid group. Finally, we study finite index subgroups of braid groups, namely, congruence subgroups of braid groups. We discuss presentations of these groups and we provide a topological interpretation of their generating sets.

Effects of trawling on sessile megabenthos in the Great Barrier Reef and evaluation of the efficacy of management strategies

A series of related research studies over 15 years assessed the effects of prawn trawling on sessile megabenthos in the Great Barrier Reef, to support management for sustainable use in the World Heritage Area. These large-scale studies estimated impacts on benthos (particularly removal rates per trawl pass), monitored subsequent recovery rates, measured natural dynamics of tagged megabenthos, mapped the regional distribution of seabed habitats and benthic species, and integrated these results in a dynamic modelling framework together with spatio-temporal fishery effort data and simulated management. Typical impact rates were between 5 and 25% per trawl, recovery times ranged from several years to several decades, and most sessile megabenthos were naturally distributed in areas where little or no trawling occurred and so had low exposure to trawling. The model simulated trawl impact and recovery on the mapped species distributions, and estimated the regional scale cumulative changes due to trawling as a time series of status for megabenthos species. The regional status of these taxa at time of greatest depletion ranged from ∼77% relative to pre-trawl abundance for the worst case species, having slow recovery with moderate exposure to trawling, to ∼97% for the least affected taxon. The model also evaluated the expected outcomes for sessile megabenthos in response to major management interventions implemented between 1999 and 2006, including closures, effort reductions, and protected areas. As a result of these interventions, all taxa were predicted to recover (by 2-14% at 2025); the most affected species having relatively greater recovery. Effort reductions made the biggest positive contributions to benthos status for all taxa, with closures making smaller contributions for some taxa. The results demonstrated that management actions have arrested and reversed previous unsustainable trends for all taxa assessed, and have led to a prawn trawl fishery with improved environmental sustainability. © 2015 International Council for the Exploration of the Sea 2015. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Feasibility study and flow scheduling optimization of a multi-product pipeline system

The first goal of this study is to analyse a real-world multiproduct onshore pipeline system in order to verify its hydraulic configuration and operational feasibility by constructing a simulation model step by step from its elementary building blocks that permits to copy the operation of the real system as precisely as possible. The second goal is to develop this simulation model into a user-friendly tool that one could use to find an “optimal” or “best” product batch schedule for a one year time period. Such a batch schedule could change dynamically as perturbations occur during operation that influence the behaviour of the entire system. The result of the simulation, the ‘best’ batch schedule is the one that minimizes the operational costs in the system. The costs involved in the simulation are inventory costs, interface costs, pumping costs, and penalty costs assigned to any unforeseen situations. The key factor to determine the performance of the simulation model is the way time is represented. In our model an event based discrete time representation is selected as most appropriate for our purposes. This means that the time horizon is divided into intervals of unequal lengths based on events that change the state of the system. These events are the arrival/departure of the tanker ships, the openings and closures of loading/unloading valves of storage tanks at both terminals, and the arrivals/departures of trains/trucks at the Delivery Terminal. In the feasibility study we analyse the system’s operational performance with different Head Terminal storage capacity configurations. For these alternative configurations we evaluated the effect of different tanker ship delay magnitudes on the number of critical events and product interfaces generated, on the duration of pipeline stoppages, the satisfaction of the product demand and on the operative costs. Based on the results and the bottlenecks identified, we propose modifications in the original setup.

Deindustrialisation and industrial communities: the Lanarkshire coalfields c.1947-1983

This thesis examines deindustrialisation, the declining contribution of industrial activities to economic output and employment, in Lanarkshire, Scotland’s largest coalfield between the early nineteenth and mid-twentieth century. It focuses on contraction between the National Coal Board’s (NCB) vesting in 1947 and the closure of Lanarkshire’s last colliery, Cardowan, in 1983. Deindustrialisation was not the natural outcome of either market forces or geological exhaustion. Colliery closures and falling coal employment were the result of policy-makers’ decisions. The thesis consists of four thematic chapters: political economy, moral economy, class and community, and generation and gender. The analysis is based on archival sources including Scottish Office reports and correspondence relating to regional policy, and NCB records. These are supported by National Union of Mineworkers Scottish Area and STUC meeting minutes, and oral history testimonies from over 30 men and women with Lanarkshire coalfield backgrounds, as well as two focus groups. The first two chapters analyse the process of deindustrialisation, with the first offering a top-down perspective and the second a bottom-up viewpoint. In chapter one deindustrialisation is analysed through changes in political economy. Shifts in labour market structure are examined through the development of regional policy and its administration by the Scottish Office. The analysis centres upon a policy network of Scottish business elites and civil servants who shaped a vision of modernisation via industrial diversification through attracting inward investment. In chapter two the perspective shifts to community and workforce. It analyses responses to coalfield contraction through a moral economy of customary rights to colliery employment. A detailed investigation of Lanarkshire colliery closures between the 1940s and 1980s emphasises the protracted nature of deindustrialisation. Chapters three and four consider the social and cultural structures which shaped the moral economy but were heavily altered by deindustrialisation. Chapter three focuses on the dense networks that linked occupation, community, and class consciousness. Increasing coalfield centralisation and remote control of pits from NCB headquarters in London, and mounting hostility to coal closures, contributed to an accentuated sense of Scottish-ness. Chapter four illuminates gender and generational dimensions. The differing experiences of cohorts of men who faced either early retirement, redundancy or transfer to alternative sectors, or those who never attained anticipated industrial employment due to final closures, are analysed in terms of constructions of masculinity and the endurance of cultural as well as material losses. This is counterpoised to women who gained industrial work in assembly plants and the perceived gradual attainment of an improved economic and social position whilst continuing to navigate structures of patriarchy.