Detection of Internal Defects in Concrete Members Using Global Vibration Characteristics

Rock-pocket and honeycomb defects impair overall stiffness, accelerate aging, reduce service life, and cause structural problems in hardened concrete members. Traditional methods for detecting such deficient volumes involve visual observations or localized nondestructive methods, which are labor-intensive, time-consuming, highly sensitive to test conditions, and require knowledge of and accessibility to defect locations. The authors propose a vibration response-based nondestructive technique that combines experimental and numerical methodologies for use in identifying the location and severity of internal defects of concrete members. The experimental component entails collecting mode shape curvatures from laboratory beam specimens with size-controlled rock pocket and honeycomb defects, and the numerical component entails simulating beam vibration response through a finite element (FE) model parameterized with three defect-identifying variables indicating location (x, coordinate along the beam length) and severity of damage (alpha, stiffness reduction and beta, mass reduction). Defects are detected by comparing the FE model predictions to experimental measurements and inferring the low number of defect-identifying variables. This method is particularly well-suited for rapid and cost-effective quality assurance for precast concrete members and for inspecting concrete members with simple geometric forms.

The Social Dynamics of Communal Violence in India

Contrasting strands of explanation of the motives underlying collective action, as either culturally determined, as an attempt at compensation, point towards an understanding of identity politics as a reaction to given conditions. They pay little attention to the social dynamics that evolve in relation to the conflict within a group, and the possible motivation that can ensue from these. This article analyses the mobilisation among Hindu-nationalist organisations. Rather than seeking their attraction in their discursive outputs and the possible answers they might give in times of change, the contention is that they are to be sought in the specific internal dynamics and the possibilities they create within their historical context. These specific opportunities for action are inherent firstly in the mode of operation relying on participation and involvement, on their direct intervention, their localness and accessibility. Moreover, the dichotomisation inherent in violence makes possible the integration of different interests and different discontents under one banner and therefore contributes to the project of unification undertaken by Hindu-nationalism.

PLASMA MEMBRANE GLYCOPROTEINS OF RAT HEPATOCELLULAR CARCINOMA CELLS

Previous investigations have demonstrated qualitative differences in the plasma membrane glycoproteins of normal and malignant rat liver cells. The present investigations were designed to identify and characterize the spectrum of glycoproteins present on the surface of Novikoff and AS-30D hepatocellular carcinoma cells. Three cell-surface radiolabeling techniques were employed to tag specifically the plasma membrane glycoproteins: lactoperoxidase catalyzed iodination, specific for tyrosine residues; galactose oxidase/NaB{('3)H}(,4), specific for galactosyl residues; and NaIO(,4)/NaB{('3)H}(,4), specific for sialic acids. The glycoproteins were resolved by one- and two-dimensional gel electrophoresis and visualized by fluorography or autoradiography. It was found that these glycoproteins are a complex population of molecules. The complexity of this system is reflected not only in the number of individual components that can be detected (> 25), but in the charge heterogeneity of individual glycoproteins due to variable sialic acid content. Certain glycoproteins behaved anamolously on SDS-polyacrylamide gel electrophoresis; the apparent molecular weight decreasing with increasing acrylamide concentrations suggesting a high % carbohydrate. Cell-surface radiolabeling techniques were employed in combination with lectin affinity chromatography, using lectins of different saccharide specificity, to analyze the saccharide determinants present on the spectrum of cell-surface molecules. It was also found that particular glycoproteins differed in their lability to protease or neuraminidase digestion and in their extractability by non-ionic detergents. From these studies, detailed models of the plasma membrane of Novikoff and AS-30D cells were constructed which incorporates information concerning the structure and accessibility of heterosaccharide and peptide moieties, the relationship of the glycolipids, and the interaction of particular glycoproteins with the lipid bilayer. These investigations provide basic information concerning the molecular composition and properties of the plasma membrane of glycoproteins of malignant rat liver cells and lay the groundwork for future comparison to normal hepatocytes. ^

The winner takes it all? Characteristics of adolescents at-risk/problem gamblers in Switzerland

Background: Gambling has and still entertains people in almost all societies throughout the world. Western societies have faced considerable changes in the amount and accessibility of gambling possibilities during the last decades, and the rates of both adolescent gamblers and problem gamblers have increased significantly. Objective: To determine the characteristics of at-risk and problem adolescent gamblers in Switzerland. Subjects: The study population consisted of 3134 students (1669 females) attending post-mandatory education in 15 randomly chosen centres. Participants were divided into non- (n=2207), non-problematic (n=754) and at-risk/ problematic gamblers (n=176). Methods: Both gambling groups were compared to non-gamblers on socio-demographic measures, substance use and Internet use. Overall, 29.6% had gambled during the past year and 5.6% had gambled in a risky or problematic way. Compared to non-gamblers and after controlling for potential confounders, non-problem gamblers were significantly more likely to be male, apprentices and to misuse alcohol. At-risk/problematic gamblers were additionally more likely to smoke cannabis, to be problematic Internet users and to be non-Swiss than non-gamblers. Conclusion: At-risk and problematic adolescent gambling is associated with other health risk behaviours. Health practitioners should include gambling in the psycho-social screening and preventive counselling of adolescents.

Understanding HCI policy in Spain in the context of acces

Spain pioneered policies related to disability and accessibility, especially in the physical environment. The first major piece of legislation was Act 13/1982 on the Social Integration of People with Disabilities. The law was published just a few years after the reinstitution of democracy in Spain in 1977 and the approval of the Spanish Constitution in 1978. Act 13/1982 is a general law that applies accessibility to social services and education, as well as to workplace and physical accessibility. This law targeted first and foremost the social integration of people with disabilities, and it was a significant success, especially in the field of employment, as it made it mandatory for private companies and public administrations to employ a certain percentage of persons with disabilities. This greatly increased the employability of people with disabilities, as highlighted in a document celebrating 30 years of Act 13/1982. Over the past 20 years, policy makers have also focused on accessibility to information and communication technologies (ICT), developing first the national computing accessibility standards and then specialized legislation. Initially, Spanish activities were mostly national but have now gained an international dimension. All these initiatives are strongly related to the discipline of human-computer interaction, as the key component of an accessible system is its user interface.

Modelos predictivos y preventivos para una Administración Pública sostenible

Con la finalidad de ayudar a la creación y desarrollo de modelos de predicción y simulación que permitan al ciudadano/administraciones publicas gestionar el consumo energético de forma más eficiente y respetuosa con el medio ambiente, se ha implementado un sistema de gestión de datos de indicadores energéticos. En 2007 la UE creó una directiva conocida como "20/20/20" en la que la Unión Europea se compromete a ahorrar un 20% del consumo anual de energía primaria desde esa fecha a 2020. En 2009 la Comisión Europea ha llegado a la conclusión de que con las medidas propuestas en dicha directiva no se podría alcanzar el objetivo de reducción del 20% del consumo energético previsto para el 2020, quedándose en menos de la mitad. Para dar un nuevo impulso a la eficiencia energética se redacta una propuesta de directiva: 2011/0172(COD). En esta directiva se obliga a los estados miembros a potenciar y ampliar la información estadística agregada sobre sus clientes finales (los perfiles de carga, la segmentación de los clientes, su ubicación geográfica, etc ). La Unión Europea plantea que incrementar el volumen y la accesibilidad de los datos de consumo energético, ayudará de forma significativa a alcanzar los objetivos. En este marco, parece lógico afirmar que un banco de datos de indicadores energéticos universalmente accesible puede contribuir de un modo efectivo al aumento de la eficiencia energética. Como aplicativo de este PFC se ha desarrollado una aplicación que permite la definición y almacenamiento de indicadores energéticos, en la que los diferentes sistemas, propietarios o abiertos, pueden volcar y extraer datos de una forma poco costosa. Se ha pretendido realizar una aplicación lo más abierta posible, tanto desde el punto de vista de la funcionalidad, permitiendo la definición del propio indicador a través del sistema, como desde el punto de vista de la implementación, usando únicamente código abierto para el desarrollo de la misma. ABSTRACT. In order to assist in the creation and development of forecasting and simulation models that enable citizens / public authorities manage energy consumption more efficient and environmentally friendly, we have implemented a data management system of energy indicators. In 2007 the EU created a policy known as " 20/20/20 " in which the European Union is committed to saving 20 % of the annual primary energy consumption from that date to 2020 . In 2009 the European Commission has concluded that the measures proposed in the directive could not achieve the goal of 20% reduction in energy consumption expected for 2020 , staying in less than half. To give new impetus to energy efficiency is drawn up a draft directive : 2011/0172 ( COD ) . This directive obliges member states to strengthen and expand aggregate statistical information on their final customers ( load profiles , customer segmentation , geographic location, etc. ) . The European Union argues that increasing the volume and accessibility ofenergy data , will significantly help to achieve the objectives . In this context , it seems logical to say that a database of universally accessible energy indicators can contribute in an effective way to increase energy efficiency. As of this PFC application has developed an application that allows the definition and storage of energy indicators , in which different systems, proprietary or open, can tip and extract data from an inexpensive way. We have tried to make an application as open as possible , both from the point of view of functionality , allowing the definition of the indicator itself through the system , and from the point of view of implementation, using only open source development thereof.

Evaluation of a transplantation algorithm for expressive speech synthesis

When designing human-machine interfaces it is important to consider not only the bare bones functionality but also the ease of use and accessibility it provides. When talking about voice-based inter- faces, it has been proven that imbuing expressiveness into the synthetic voices increases signi?cantly its perceived naturalness, which in the end is very helpful when building user friendly interfaces. This paper proposes an adaptation based expressiveness transplantation system capable of copying the emotions of a source speaker into any desired target speaker with just a few minutes of read speech and without requiring the record- ing of additional expressive data. This system was evaluated through a perceptual test for 3 speakers showing up to an average of 52% emotion recognition rates relative to the natural voice recognition rates, while at the same time keeping good scores in similarity and naturality.

Urban built environment analysis: evidence from a mobility survey in Madrid

Applications involving travel behavior from the perspective of land use are dating from the 1990s. Usually, four important components are distinguished: density, diversity and design (3D?s of Cervero and Kockelman) and accessibility (introduced by Geurs and van Wee). But there is not a general agreement on how to measure each of those 4 components. Density is used to be measured as population and employment densities, but others authors separate population density between residential and building densities. A lot of measures have been developed to estimate diversity: among others, a dissimilarity index to indicate the degree to which different land uses lie within one another?s surrounding, an entropy index to quantify the degree of balance across various land use types or proximities to commercial-retail uses. Design has been characterized by site design, and dwelling and street characteristics. Lastly, accessibility has become a frequently used concept, but its meaning on travel behavior field always refers to the ability ?to reach activities or locations by means of a travel mode?, measured as accessibility to jobs, to leisure activities, and others. Furthermore, the previous evidence is mainly based on US data or on north European countries. Therefore, this paper adds some new evidence from a Spanish perspective to the research debate. Through a Madrid smartphone-based survey, factor analysis is used to linearly combine variables into the 3D?s and accessibility dimensions of the built environment. At a first step for future investigations, land use variables will be treated to define accurately the previous 4 components.

Magnificador basado en teléfono móvil: prototipo funcional

Enmarcado en un proyecto más amplio, en este TFG se ha realizado un prototipo funcional de una aplicación Android para realizar una función de magnificador digital de documentos en papel. Para llevarlo a cabo se ha realizado un estudio de los TFG anteriores incluidos en este proyecto, así como un estudio del desarrollo en Android. Posteriormente se ha diseñado la interfaz de usuario del prototipo funcional, partiendo de los resultados de la evaluación del prototipo de baja fidelidad realizado en un TFG anterior. Tras este diseño se ha Implementado el prototipo funcional, usando las librerías desarrolladas en TFG anteriores. Por último, se ha realizado una evaluación de la usabilidad y accesibilidad del prototipo funcional y se han definido una serie de recomendaciones de cambio a partir de esta evaluación de cara al desarrollo del sistema definitivo. ---ABSTRACT---As a part of a larger project, this TFG develops a functional prototype of an Android application to perform a magnifier function to paper documents. This application is aimed at people with low vision problems. To get it done, a study of the previous TFG included in this project as well as a study of Android developing has been made. After that, the user interface of the functional prototype has been designed, starting from the results of the low-fidelity prototype evaluation made in a previous TFG. In this design, several changes have been made regarding the low-fidelity prototype, applying the results of the usability evaluation. After this design, the functional prototype has been implemented using the libraries developed in the previous TFG. In this process some modifications over these libraries have been required. Finally, a usability and accessibility evaluation about the prototype with real users has been made, and there have been defined several change recommendations from this evaluation having in mind the development of the final system.

Diseño e implementación de una herramienta para el reconocimiento automático de términos compuestos dentro de vocabularios biomédicos

En los vocabularios biomédicos actuales más utilizados, suelen existir mecanismos de composición de términos a partir de términos pre-existentes. Estos mecanismos de composición aumentan la potencia de los lenguajes que los poseen pero parten con la desventaja de la posibilidad de representar un mismo concepto con diferentes conceptos base, lo que incluye un componente de ambigüedad en los mismos. Este trabajo de fin de grado consiste en la realización de una herramienta que permita reconocer términos de estos vocabularios biomédicos complejos, es decir, vocabularios con términos compuestos por otros términos como puede ser el caso de SNOMED. Con la consecución de este proyecto, obtendremos una herramienta capaz de identificar las ambigüedades presentes en la representación de estos conceptos compuestos y representar de una forma homogénea dichos conceptos. Para favorecer la interoperabilidad y accesibilidad de la herramienta se ha decidido ofrecerla mediante una interfaz web accesible desde cualquier dispositivo o lugar con acceso a internet. ---ABSTRACT---In the latest and most used biomedical languages, we usually and term composition operations from existing terms. These mechanisms increase the utility of those terminologies they belong to. Despite this, these operations present a disadvantage, that is, the possibility of representing the same concept with diferent base concepts which introduces a certain degree of ambiguity in those complex terms. The objective of this final degree project consists in developing a tool that allows recognizing terms from those complex biomedical vocabularies, that is, terminologies with terms comprised of simpler terms such as SNOMED. By completing this project, we obtained a tool capable of identifying the present ambiguities in the representation of those composite concepts and represent them in a homogenous format. To facilitate the interoperability and accessibility of the tool it was decided to other it through a web interface loadable from any place or device with access to the internet.

Assessment methodology applied to demand measures to change urban mobility behavior

In order to minimize car-based trips, transport planners have been particularly interested in understanding the factors that explain modal choices. Transport modelling literature has been increasingly aware that socioeconomic attributes and quantitative variables are not sufficient to characterize travelers and forecast their travel behavior. Recent studies have also recognized that users’ social interactions and land use patterns influence travel behavior, especially when changes to transport systems are introduced; but links between international and Spanish perspectives are rarely dealt with. The overall objective of the thesis is to develop a stepped methodology that integrate diverse perspectives to evaluate the willingness to change patterns of urban mobility in Madrid, based on four steps: (1st) analysis of causal relationships between both objective and subjective personal variables, and travel behavior to capture pro-car and pro-public transport intentions; (2nd) exploring the potential influence of individual trip characteristics and social influence variables on transport mode choice; (3rd) identifying built environment dimensions on travel behavior; and (4th) exploring the potential influence on transport mode choice of extrinsic characteristics of individual trip using panel data, land use variables using spatial characteristics and social influence variables. The data used for this thesis have been collected from a two panel smartphone-based survey (n=255 and 190 respondents, respectively) carried out in Madrid. Although the steps above are mainly methodological, the application to the area of Madrid allows deriving important results that can be directly used to forecast travel demand and to evaluate the benefits of specific policies that might be implemented in the area. The results demonstrated, respectively: (1st) transport policy actions are more likely to be effective when pro-car intention has been disrupted first; (2nd) the consideration of “helped” and “voluntary” users as tested here could have a positive and negative impact, respectively, on the use of public transport; (3rd) the importance of density, design, diversity and accessibility underlying dimensions responsible for land use variables; and (4th) there are clearly different types of combinations of social interactions, land use and time frame on travel behavior studies. Finally, with the objective to study the impact of demand measures to change urban mobility behavior, those previous results have been considered in a unique way, a hybrid discrete choice model has been used on a 5th step. Then it can be concluded that urban mobility behavior is not only ruled by the maximum utility criterion, but also by a strong psychological-environment concept, developed without the mediation of cognitive processes during choice, i.e., many people using public transport on their way to work do not do it for utilitarian reasons, but because no other choice is available. Regarding built environment dimensions, the more diversity place of residence, the more difficult the use of public transport or walking.

Los paisajes del desecho: reactivación de los lugares del deterioro

Actualmente en nuestro planeta producimos 1.300 millones de toneladas de residuos urbanos al año. Si los extendemos sobre la superficie de un cuadrado de lado 100 m (una hectárea) alcanzarían una altura de 146 km. ¿Cuál es el origen de nuestros residuos? ¿A dónde va esta basura? ¿Cómo nos afecta? ¿Tiene alguna utilidad? Se trata de un problema antiguo que, en los últimos tiempos, ha adquirido una nueva dimensión por el tipo y la cantidad de residuos generados. Las primeras preocupaciones de la ciudad por ordenar estos problemas dieron lugar al establecimiento de espacios o lugares específicos para la acumulación de los residuos urbanos: los vertederos. Los desechos hoy se generan más rápidamente que los medios disponibles para reciclarlos o tratarlos. Los vertederos de residuos urbanos son y seguirán siendo, a corto y medio plazo, soluciones válidas por ser un método de gestión relativamente barato, sobre todo en los países en vías de desarrollo. Como consecuencia y necesidad de lo anterior, se plantea demostrar que la recuperación y la transformación de estos vertederos de residuos urbanos (lugares del deterioro), una vez abandonados, es posible y que además pueden dar lugar a nuevos espacios públicos estratégicos de la ciudad contemporánea. Son espacios de oportunidad, vacíos monumentales producto de una reactivación arquitectónica y paisajística realizada a partir de complejos procesos de ingeniería medioambiental. Pero las soluciones aplicadas a los vertederos de residuos urbanos desde mediados del siglo XX se han realizado exclusivamente desde la ingeniería para tratar de resolver cuestiones técnicas, un modelo agotado que ya no puede gestionar la magnitud que este problema ha alcanzado, haciéndose necesaria e inevitable la participación de la arquitectura para abrir nuevas líneas de investigación y de acción. En estos primeros compases del siglo XXI existe una “nueva” preocupación, un “nuevo” interés en los paradigmas de lo ecológico y de la sostenibilidad, también un interés filosófico (que igualmente otorga un nuevo valor al residuo como recurso), que dirigen su mirada hacia un concepto de paisaje abierto y diferente a modelos anteriores más estáticos, recuperando como punto de partida el ideal pintoresco. El landscape urbanism se consolida como una disciplina capaz de dar respuesta a lo natural y artificial simultáneamente, que sustituye a las herramientas tradicionales de la arquitectura para solucionar los problemas de la ciudad contemporánea, incorporando las infraestructuras de gran escala, como un vertedero de residuos urbanos, y los paisajes públicos que generan como el verdadero mecanismo de organización del urbanismo de hoy. No se trata solo de un modelo formal sino, lo que es más importante: de un modelo de procesos. Esta nueva preocupación permite abordar la cuestión del paisaje de manera amplia, sin restricciones, con un alto grado de flexibilidad en las nuevas propuestas que surgen como consecuencia de estos conceptos, si bien los esfuerzos, hasta la fecha, parecen haberse dirigido más hacia el fenómeno de lo estético, quedando todavía por explorar las consecuencias políticas, sociales, económicas y energéticas derivadas de los residuos. También las arquitectónicas. El proyecto del landscape urbanism se ocupa de la superficie horizontal, del plano del suelo. Desde siempre, la preparación de este plano para desarrollar cualquier actividad humana ha sido un gesto fundacional, un gesto propio necesario de toda arquitectura, que además ahora debe considerarlo como un medio o soporte biológicamente activo. En términos contemporáneos, el interés disciplinar radica en la continuidad y en la accesibilidad del suelo, diluyendo los límites; en que funcione a largo plazo, que se anticipe al cambio, a través de la flexibilidad y de la capacidad de negociación, y que sea público. La recuperación de un vertedero de residuos urbanos ofrece todas estas condiciones. Un breve recorrido por la historia revela los primeros ejemplos aislados de recuperación de estos lugares del deterioro, que han pasado por distintas fases en función de la cantidad y el tipo de los desechos producidos, evolucionando gracias a la tecnología y a una nueva mirada sobre el paisaje, hasta desarrollar una verdadera conciencia de lo ecológico (nacimiento de una ideología). El Monte Testaccio en Roma (siglos I-III d.C.) constituye un caso paradigmático y ejemplar de vertedero planificado a priori no solo como lugar en el que depositar los residuos, sino como lugar que será recuperado posteriormente y devuelto a la ciudad en forma de espacio público. Una topografía de desechos generada por acumulación, organizada y planificada durante tres siglos, que nos hace reflexionar sobre los temas de producción, consumo y proyecto arquitectónico. El Monte Testaccio revela una fuente de inspiración, un arquetipo de gestión sostenible de los recursos y del territorio. A través de la experiencia en la recuperación y transformación en espacios públicos de casos contemporáneos, como el antiguo vertedero de Valdemingómez en Madrid o el de El Garraf en Barcelona, se han analizado las técnicas y las soluciones empleadas para establecer nuevas herramientas de proyecto planteadas en clave de futuro, que revelan la importancia de los procesos frente a la forma, en los cuales intervienen muchos factores (tanto naturales como artificiales), entre ellos la vida y el tiempo de la materia viva acumulada. Son lugares para nuevas oportunidades y ejemplos de una nueva relación con la naturaleza. La reactivación de los vertederos de residuos, a través del proyecto, nos propone una nueva topografía construida en el tiempo, el suelo como soporte, como punto de encuentro de la naturaleza y los sistemas tecnológicos de la ciudad que posibilitan nuevos modos de vida y nuevas actividades. Los vertederos de residuos son inmensas topografías naturales surgidas de procesos artificiales, atalayas desde las que divisar un nuevo horizonte, un nuevo mundo, un nuevo futuro donde sea posible lograr la reversibilidad de nuestros actos del deterioro. Pero la voluntad de estas recuperaciones y transformaciones no consiste exclusivamente en su reintegración al paisaje, sino que han servido como muestra de las nuevas actitudes que la sociedad ha de emprender en relación a los temas medio ambientales. ABSTRACT Here on our planet we currently produce 1.3 billion tonnes of urban waste per year. If we were to spread this over a surface of 100m2 (one hectare), it would reach a height of 146km. What is the origin of this waste? Where does our refuse go? How does it affect us? Does it have any uses? We are dealing with an old problem which, in recent times, has taken on a new dimension due to the type of waste and the amount generated. Cities’ first concerns in resolving these problems gave rise to the establishment of areas or specific places for the accumulation of urban waste: landfills. These days, waste is generated more quickly than the available resources can recycle or process it. Urban waste landfills are and will continue to be, in the short and mid-term, valid solutions, given that they constitute a relatively cheap method for waste management, especially in developing countries. Consequently and necessarily, we plan to demonstrate that it is possible to recover and transform these urban waste landfills (areas of deterioration) once they have been abandoned and that they can give rise to new strategic public areas in contemporary cities. They are areas of opportunity, monumental vacancies produced by an architectural reactivation of the landscape, which is achieved using complex processes of environmental engineering. But the solutions applied to urban waste landfills throughout the 20th century have used engineering exclusively in the attempt to resolve the technical aspects. This is a worn-out model which can no longer handle the magnitude which the problem has attained and therefore, there is an inevitable need for the participation of architecture, which can open new lines of research and action. In these first steps into the 21st century, there is a “new” concern, a “new” interest in the paradigms of environmentalism and sustainability. There is also a philosophical interest (which assigns the new value of ‘resource’ to waste) and all is aimed towards the concept of an open landscape, unlike the previous, more static models, and the intention is to recover picturesque ideals as the starting point. Landscape urbanism has been established as a discipline capable of simultaneously responding to the natural and the artificial, replacing the traditional tools of architecture in order to resolve contemporary cities’ problems. It incorporates large scale infrastructures, such as urban waste landfills, and public landscapes which are generated as the true organisational mechanism of modern day urbanism. It is not merely a formal model, it is more important than that: it is a model of processes. This new concern allows us to address the matter of landscape in a broad way, without restrictions, and with a great degree of flexibility in the new proposals which come about as a consequence of these concepts. However, efforts to date seem to have been more directed at aesthetic aspects and we have yet to explore the political, social, economic and energetic consequences derived from waste – nor have we delved into the architectural consequences. The landscape urbanism project is involved with the horizontal surface, the ground plane. Traditionally, the preparation of this plane for the development of any human activity has been a foundational act, a necessary act of all architecture, but now this plane must be considered as a biologically active medium or support. In contemporary terms, the discipline’s interest lies in the continuity and accessibility of the land, diffusing the limits; in long term functionality; in the anticipation of change, via flexibility and the ability to negotiate; and in it being a public space. The recovery of an urban waste landfill offers all of these conditions. A brief look through history reveals the first isolated examples of recovery of these spaces of deterioration. They have gone through various phases based on the quantity and type of waste produced, they have evolved thanks to technology and a new outlook on the landscape, and a real environmental awareness has been developed (the birth of an ideology). Monte Testaccio in Rome (1st to 3rd Century AD) constitutes a paradigmatic and exemplary case of a landfill that was planned a priori not only as a place to deposit waste but also as a place that would be subsequently recovered and given back to the city in the form of a public space. This spoil mound, generated by organised and planned accumulation over three centuries, makes us reflect on the themes of production, consumption and architectural planning. Monte Testaccio reveals a source of inspiration, an archetype of the sustainable management of resources and land. Using our experience of contemporary cases of land recovery and its transformation into public spaces, such as the former Valdemingómez landfill in Madrid or the Garraf in Barcelona, we analysed the techniques and solutions used in order to establish new project tools. These are proposed with an eye on the future, seeing as they reveal the importance of the processes over the form and involve many factors (both natural and artificial), including the life and age of the accumulated living matter. They are places for new opportunities and examples of our new relationship with nature. The reactivation of landfills, via this project, is a proposal for a new topography built within time, using the ground as the support, as the meeting point between nature and the technological systems of the city which make it possible for new ways of life and new activities to come about. Landfills are immense natural topographical areas produced by artificial processes, watchtowers from which to discern a new horizon, a new world, a new future in which it will be possible to reverse our acts of deterioration. But the intention behind these recoveries and transformations does not only hope for landscape reintegration but it also hopes that they will also serve as a sign of the new attitudes that must be adopted by society with regard to environmental matters.

Los espacios mineros abandonados. El caso de la Comunidad de Madrid

La Comunidad de Madrid ha tenido un pasado minero importante que ha dejado su vestigio en el territorio. Actualmente la explotación de minerales no metálicos y de rocas industriales y ornamentales continúa, pero no así la de la minería metálica que en el pasado fue abundante. Hoy en día todas estas minas están abandonadas, dando lugar a zonas degradadas con un elevado riesgo para la seguridad de las personas y de los animales terrestres que habitan por sus inmediaciones, y necesitan ser intervenidas atendiendo, además, a su integración o recuperación ecológica y paisajística en el territorio. El principal propósito de esta tesis es conocer la situación actual que presentan las minas abandonadas de metales y proponer unos modelos de actuación para la rehabilitación e integración de los espacios mineros abandonados de la Comunidad de Madrid, cuya ventaja también estriba en su posible extrapolación a otras aéreas de gestión con una problemática similar. Partiendo de una selección de cincuenta y siete minas de interior metálicas abandonadas, se ha hecho un diagnostico en función de su seguridad (riesgo), interés cultural, arqueológico e histórico y por su afección a espacios protegidos, resultando que en todas, excepto en tres de ellas, es preciso llevar a cabo medidas protectoras y de restauración e integración en el medio ambiente. El conjunto de minas catalogadas de alto riesgo para la seguridad son veintitrés, y sobre ellas se ha realizado un Análisis Clúster, en el que además de los criterios de gestión formulados: seguridad, protección del patrimonio minero-industrial e integración ecológico-paisajística, se han incorporado otros modificadores como distancia a poblaciones, caminos, pistas y vías pecuarias, y accesibilidad. Con los resultados de este análisis se obtienen una clasificación por grupos de las minas en relación con las características intrínsecas de las explotaciones preseleccionadas y la tipología de problemas que presentan, y a partir de ella se plantean soluciones viables que se concretan en la redacción de una serie de anteproyectos tipo. Una de las principales aportaciones es que se trata de un modelo de inventariocaracterización- actuación extrapolable a otros entornos similares con problemáticas parecidas. Las propuestas de actuación que figuran en los anteproyectos tipo se proponen como medidas aplicables en situaciones similares. La tesis además también incorpora una base de datos georreferenciada que permite la localización de las explotaciones mineras abandonadas, el acceso rápido a sus características y a la propuesta de restauración correspondiente. ABSTRACT The Community of Madrid had an important mining past that left its traces in the territory. Currently the explotation of non-metallic minerals and industrial and ornamental rocks continues, but not so much with the metal deposits that were abundant in the past. Today these mines are abandoned, resulting in degraded areas with a high risk to the safety of nearby people and animals that inhabit its vicinity, and they need to be intervened, by tending to their environment integration or ecological and landscape recovery. The main objective of this thesis is to know the current situation of abandoned metal mines and propose an action model for the rehabilitation and integration of abandoned mining areas of the Community of Madrid, whose advantage also is its possible extrapolation to other management areas with similar problems. From a selection of fifty-seven abandoned metal mines, a diagnosis has been made, based on safety (risk), cultural, archaeological and historical interests and how it can be related to protected areas, resulting that all but three of them need measures of protection, restoration and integration to the environment. The set of mines that are classified as a high security risk are twenty-three, and it has been made on them an Cluster Analysis, as in addition to the management formulated criteria, such as safety, protection of mining and industrial heritage and eco-landscape integration, it has been incorporated other modifying variables, such as distance to populations, roads, tracks and livestock paths, and accessibility. With the results of this analysis, a classification of similar groups of mines in relation with the intrinsic characteristics of the preselected mines and typology problems, and from it a set of viable solutions will be specified, being then drafted on a series of proposals. One of the main contributions of this research is that it consists of an inventorycharacterization- action model, which can be extrapolated to other similar environments with similar problems. The action measures that are contained in the proposals are defined as applicable to similar situations. The thesis also incorporates a geo-referenced database that allows finding the location of abandoned mines, thus giving quick access to its features and its corresponding restoration proposal.

IDR/UPM facilities for liquid bridge experimentation on earth under microgravity conditions

Besides space laboratories for in-orbit experimentation, Earth based facilities for laboratory experimentation are of paramount importance for the enhancement on liquid bridge knowledge. In spite of the constraints imposed by simulated microgravity (which force to work either with very small size liquid bridges or by using the Plateau tank technique, amongst other techniques), the availability and accessibility of Earth facilities can circumvent in many cases the drawbacks associated with simulated microgravity conditions. To support theoretical and in orbit experimental studies on liquid bridges under reduced gravity conditions, several ground facilities were developed at IDR. In the following these ground facilities are briefly described, and main results obtained by using them are cited.

Espacio web para el diseño de un museo virtual de la historia de la informática

El objetivo principal de crear un espacio web para el Museo Histórico de la Informática (MHI) perteneciente a la Escuela Técnica Superior de Ingenieros Informáticos (ETSIINF) de la Universidad Politécnica de Madrid (UPM) es la difusión de la historia de la informática entre el público en general. Si bien es cierto que existe ya una página web de consulta del MHI con algunas imágenes y contenido sobre los objetos que allí se exhiben, es también reseñable que se trata de un espacio obsoleto, lleno de carencias y extremadamente difícil de gestionar y actualizar, por lo que se hacía imprescindible actualizar el diseño del espacio web, los contenidos y el sistema de gestión de los mismos, cosa que es de gran interés para un lugar divulgativo. En la actualidad, existen maneras mucho más amigables para el usuario de navegar por una web; y de la misma manera para un administrador, gestionar el contenido de la misma y mantener a los usuarios bien informados de todo lo que se ofrece en cada momento. Esto es posible gracias a los sistemas de gestión de contenidos o content management system (CMS), de los que se hablará lo largo de todo el documento. Estos sistemas, dan una facilidad mucho mayor a los encargados de llevar al día una página web, sin tener que saber de programación, lenguajes o informática en general, ya que incorporan paneles de control muy intuitivos y fáciles de manejar, que son una ventaja tanto para ellos como para los usuarios. Es por esta razón que, hay páginas web como la de las empresas IKEA, Ubuntu o, en especial para el caso que compete al documento, el museo del Louvre usan gestores de contenidos para sus páginas web. Y es que las ventajas y facilidades que ofrece un CMS son realmente interesantes y se tratará de todas ellas en el documento, de la elección del CMS que mejor se ajusta a los requisitos del museo, las restricciones a la hora del despliegue en el ámbito de la ETSIINF y de cómo mejorará esto la calidad visual y divulgativa del MHI. Este trabajo se desarrolla a lo largo de 11 capítulos, en los que se muestra como construir un sitio web, las posibilidades y la elección final para este caso. En el primer capítulo se hace una pequeña introducción de lo que es el proyecto, se especifican los objetivos, la motivación del mismo y el alcance que tiene. En el segundo capítulo se muestra la información que se ha recopilado en el trabajo de investigación que se hace previo al desarrollo. En él se muestran los distintos tipos de páginas web, que tecnologías y lenguajes se pueden usar para su construcción, una comparativa sobre otras entidades similares al MHI, las limitaciones que presenta el entorno y la elección final que se consideró más adecuada para este caso. En el capítulo tres se empieza a desarrollar la solución a través del diseño. Aquí se puede encontrar el diseño de más bajo nivel que se le presenta al cliente para sentar las bases del trabajo, el diseño de alto nivel con un mayor grado de realidad que el anterior y una preparación de lo que serán los planes de prueba. El capítulo cuatro muestra todo lo que se ha usado en la implementación y la integración de la página web: herramientas, tecnologías, plantillas de diseño y módulos que proporcionan distintas funcionalidades. Llegados al capítulo cinco, se puede ver una detallada documentación de los resultados de las pruebas de usabilidad y accesibilidad realizadas, y las conclusiones que subyacen de estas. Una vez acabada la implementación del sitio web del MHI, en el capítulo seis se intenta hacer una labor de consultoría, mostrando precios y presupuestos de las distintas tareas que se han llevado a cabo para la realización de este proyecto. En el capítulo siete se extraen las conclusiones de todo lo acontecido en los capítulos anteriores y en el ocho unas líneas sobre posibles trabajos futuros que se podrían llevar a cabo en base a lo que ya se tiene en la institución, incluido este trabajo. Para facilitar la comprensión y satisfacer la curiosidad del lector, se ha incluido en el capítulo nueve la bibliografía con toda la documentación consultada y en el diez un glosario de términos para la aclaración de términos y acrónimos más técnicos. Para acabar, en el capítulo once se anexionan tanto el documento que se usó para las pruebas de usabilidad como un manual de administrador para el sitio web, que hace más amigable el entorno para las personas que lo tengan que mantener en un futuro.---ABSTRACT---The main goal of creating a website for the Informatics Historical Museum (“Museo Histórico de la Informática” or MHI) located in the Higher Technical School of Informatics Engineers (“Escuela Técnica Superior de Ingenieros Informáticos” or ETSIINF) of the Polytechnic University of Madrid (“Universidad Politécnica de Madrid” UPM), is to promote the aforementioned museum as to increase its reach to the public. While it is true that there already is a consulting website with some pictures and information about the items which are displayed in the building, it is outdated and the data is scarce. Moreover, it is extremely complicated to manage and to regularly update the web page, which is very important for informative/broadcasting media. Currently, there are easier ways for the users of a website to consult whatever information they want, as well as it is now easy for a website manager to display new content and to keep the users informed about what is been offered at every moment. This is possible because of content management systems (CMS), which will be discussed throughout the entire paper. These systems make it easier to use for the administrator of a website to keep it up to date without the necessity for them of having any knowledge or skills in programming, languages or computing, because the systems have an intuitive control panel that is easy to use, which is an advantage for both managers and users. Because of all these reasons, there are lots of companies that use this kind of systems, such as IKEA, Ubuntu or, especially, the Louvre Museum, to which we direct our attention all throughout this report. It is easy to notice that these systems have an important and very interesting number of perks and benefits. In the next chapters of the document we will explain the benefits of the program as well as the choice on the kind of CMS that best suits the requirements of the museum and, finally, the restrictions of the school for the deployment and of how all of this will improve the visual and informational qualities of the MHI. This work is developed over 11 chapters, shown how to build up a website, the possibilities and the final choice for this case. In the first chapter a brief introduction of the project, goals, motivation and scope thereof having specified are done. Before the development of the website, the second chapter shows de information of the researching work. It discusses the different types of websites, technologies and languages that can be used for build-up, a comparison of similar entities to MHI, the limitations of the environment and the final choice was considered more appropriate for this case. Chapter three begins to develop the design of the solution. Here there are the lowest level design that presents the customer to fix any problem, the high level design with a higher degree of reality than the last and the test plans. Chapter four shows everything that has been used in the implementation and integration of the website: tools, technologies, design templates and modules that provide different functionalities. Reaching the fifth chapter, you can see a detailed documentation of the results of the usability and accessibility tests made to some users and the conclusions of it. Once the implementation of MHI website is done, in chapter six there is a consultancy work, showing prices and budgets of the different tasks which were carried out for this project. In chapter seven there are the conclusions of what happened in the previous chapters and eight chapter shows possible future works that could be carried out based on what the institution already have, including this work. To make easier to the reader understand this paper and satisfy his curiosity, the chapter nine includes the bibliography consulted with all the documentation and chapter ten has a glossary of terms and an explanation of technical terms and acronyms. Finally, in chapter eleven there are attached both the document that was used for usability testing as a manual administrator for the website, making the environment friendlier for people who have to maintain it in the future.