227 resultados para Bombas centrífugas


Relevância:

10.00% 10.00%

Publicador:

Resumo:

This work has the purpose to explain how the sugar and alcohol sector works, detail all the processes which uses pumps and assist in the selection and specification of pumps attached with engines, that will make part in important industry processes in the manufacture of sugar and alcohol. A bibliographic revision about the working of sugar and alcohol sector and about pumps were made to help the analysis of a case. This case had the purpose to analyze the selected pumps that were part of a initial project of an industry which aimed a future expansion. The pumps that were selected to made part of the initial project were over dimensioned and were operating out of the best performance point, making the pumps inefficient because the expansion didn't happened. The solution was to select another pump with bigger performance and less power consumption to have a decrease in the energy consumption and in the operational costs of the industry and using the extra electric energy in the industry or selling it

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper aims to study the thermal aspects involved in a liquid cooling system for processors, analyzing their competitiveness and efficiency across the fins and fan system usually used by personal computers, because electronic components become more potent and consequently current methods of cooling are becoming ineffective. The liquid cooling system and air cooling system have different heat transfer mechanisms that involve mainly convection and conduction heat transfer modes, and, furthermore, requires an analysis of fluid dynamics, which can evaluate the losses involved in the closed system, consisting in an exchanger heat pipe and water blocks in liquid cooling system or heat sink and turbo-axial fan in the air cooling system

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The present work aims to conduct a study of the economic feasibility of the implementation of variable frequency inverters in pump systems with variable flow rates. The concern with the reduction of energy expenditure in industries raised in 2001 due to the energy crisis that hit Brazil at that time, forcing industries to reduce their electric costs under penalty of fines if this were not done (MOREIRA, 2008). Frequency inverter is an electronic device that allow greater control in the operation of pumping systems and also a reduction in electrical consumption, being a viable solution to achieve a reduction in energy consumption. For the development of this work, approaching important topics in pumping systems was necessary in order to make a correct choice of hydraulic pumping and also other components responsible for the operation of the system , such as electric motors and frequency inverters. In the case study, a theoretical analysis of the behavior of electrical consumption in systems with variable flow rates was performed, comparing when the system is operated via frequency inverters and when the system is operated without such a device. As expected, the result of the implantation of the device was quite satisfactory, and the primary goal of reducing energy expenditure was achieved. Also important to highlight the environmental issue of this work, as all forms of energy production affects nature in some way, achieving a reduction in consumption also contributes indirectly in environmental conservation

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The government of a megalopolis, such as São Paulo, shows singular challenges that do not exist in less complex urban contexts. Being a city of a country with a recent industrialized economy, with an income (functional and geographical) highly concentrated, that has resumed the democracy for only one quarter of a century, this megacity lives with its own political and organizational assignments, due to the contradictory character of the political behavior of its habitants/ voters and of the traditionalist nature of populism and patronage in the relationship between the rulers and the ruled and between the Executive and Legislative powers at the local level. In such context, the difficulties to prosecute the assignments of the metropolitan organization, the decentralization and the institutionalization of citizen participatory channels in the governance and administrative activities are huge. The centrifuge forces (of the decentralization of the local government, through subprefectures), the centripetal forces ( of the metropolitan organization process) and the diffuse forces (of the claiming popular participation) act simultaneously over the deciding processes, in São Paulo, receiving, still, state and national political influences, since the city is a very significant historically producer of political and electoral capital. The analysis of the recent experience of the creation of the subprefectures and the representative counsels (fixed in the Municipality Organic Law of 1990) and the attempt to implement the participatory budgeting, in two occasions (1989-1992 and 2001-2004), reveal some of the social and political reasons that make difficult the establishment of a solidly democratic governance and of a more efficient public administration in the metropolitan area of São Paulo.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Persistent Organic Pollutants (POPs) are chemical substances extraordinarily toxic and persistent in the environment. Due to these properties, POPs are targets of the Stockholm Convention which aims to provide means to eliminate production and use by encouraging the reduction and, where possible, eliminating the release of these contaminants to the environment. One of the articles of this _Convention aims to assess the basal levels of such substances in the environment to monitor both the reduction of release to the environment, and to assess human exposure, using analyzes of milk and air for example. Although efforts to control POPs production and release to the environment have been made, data about their levels in Brazil are still scarce, mainly in the atmosphere or indoor environment. Considering the permanence of people inside its house, this study presents a method for POP extraction from XAD-2 sorbent employed in indoor air sampling, with identification and quantification by GC-ECD. GC-ECD linear range of the studied analytes, congeners of polychlorinated biphenyls (PCB) (28, 52, 101, 118, 138, 153 and 180), DDTs and their metabolites (DDDs, DDEs) and endosullan (isomers c - and 13 - and metabolite endosulfan sulfate) ranged between 0.5 and 16.0 ng mL-I with r2 > 0.967. The method developing consist of selecting the extraction solvent system by agitation (90 rpm, 1 hour) with n-hexan,e (2 mL) or n-hexane:acetone (1:1, v/v) (2 mL), concentration the extract with a gentle N2 stream, and evaluation of breakthrough with passage or air through the fortified XAD-2 cartridge before extraction, employing a low volume air suction pump (Pump Model 224 universal-PCXR8; 5-5000 mL min-1, SKC Inc., Eighty Four, PA, USA), Calibrator Dry-Cal DC-Lite (BIOS, Butler, NJ, USA)). Two fortification levels were employed, 15 and 30 ng. After selecting n-hexane as extraction solvent, with accuracy and precision ranging...

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Since ancient times, it has been a huge challenge to all people around the world to manage to get their fresh water, keeping it clean and providing it to every human being, so that it can be used for their daily needs. This is especially true for small properties in the countryside and in isolated areas with low demographic density. Pumping the water in those regions is a solution that rationalizes its use in domestic chores, in animal rearing and in the irrigation systems of cultivated areas. Making feasible local, renewable and non-polluted energetic alternatives is the aim for those areas that are usually far away from the public electric network. Using photovoltaic solar energy is the alternative now proposed. For this objective was built a system with two monocrystalline panels, one pump, two water tanks, two level sensors and a solenoid valve to pump water, using a pump powered an array of monocrystalline solar panels. The main goal was to compare their rate of water flow and their energy consumption. The use of one data acquisition equipment allowed collecting meteorological, electrical and hydraulic values, and also serving for the control and activation of the pumping system. During four months in a row as from April 2009, arrangements with one or two panels were tested. Mathematics correlations and adjustment lines were used to interpret the behavior of obtained dataset. During the analyzed period the system followed the linear equations with great accuracy. The daily average amount of water pumped by the several tested arrays stayed between 1,100 and 2,500 liters, and that is enough to supply a small rural property. The pumping system with two panels effectively showed the major amount of water, but a system with one panel can be an economical solution until 1,500 liters on day. It did not characterize a direct relationship between power or quantity of photovoltaic panels and daily outflow of water pumping.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The End of Course Work this aims, the hydrological cycle of water on our planet, and explain about its importance in the lives of living beings, finally, carry out a detailed analysis regarding the financial feasibility of implementing a system Shauer sustainable in the condominium, the first being the pickup of river water, which will use a reservoir for capitation and filtering, a reservoir for water storage filtered and pumps that will redirects it to outside faucets and toilets use in residences

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We know that the Earth goes through natural cycles that influence its climate and the development of their societies. In recent decades, climate changes and nature began to call world attention to the unbridled exploitation that was carried by the current economic system, causing unrest among scientific, social, political and economic world. The theory that man causes a warming in global temperatures by the release of greenhouse gases made the headlines of major newspapers in the world. From there, it was only a matter of time before environmental concerns became ownership of capital by its excessive appropriation. The fear of nuclear threat by the bombs of Hiroshima and Nagasaki left in fanfare the world, which together with the devastating impact of the exploitation of man and nature gave birth to the Environmental Revolution, a way of trying to change the development patterns of the time and behavior of the population. However, based on the historical form of capitalist domination, this was another measure that was apossada the economic system being transformed into economic value and political exchange. The origin of the conventions, meetings, conferences, parliaments set up to discuss environmental issues, eventually became forums of political and economic talks focused on environmental governance, valuing an asset that is public and everyone. Environmental and climate issue now has a value, thus turning the agenda on the agenda of the United Nations (UN) for its political and economic regulation in the form of global agreement. Given the need for understanding the climate issue, was born the Conference of the Parties (COPs), a regulatory body for climate negotiations, surrounded interests, complexities, conflicts and disagreements between the parties countries, which becomes clear when we analyze their agreements...

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The modernization of the world made the speed, accuracy and reliability of all existing processes become increasingly necessary. For this evolution to occur every day, the evolution of the equipment was strategic, but not as much as needed. It is necessary for such equipment to ensure its function and, in case of failure, an early diagnosis to prevent loss. Therefore the evolution of maintainability and reliability in equipment is also paramount. Thus, the growth of forms of maintenance was driven by this scenario, forming maintenance philosophies. Among many, there is the RCM, which have its focus on the identification, parameters development and performance preview. One of those methodologies from this idea is the FMEA, process that has been studied and implemented this work, aiming the anticipation of failure modes and guidance for the use of a heat exchanger and a pump. This implementation has the aid of another process of RCM, the PHA, which was also shown and implemented, these results being used to start the FMEA process. The results show the activities with the highest chance of failure, presenting also the measures to be taken to avoid or minimize them. It is shown, in this paper, concern with the valves because they maintain control and system security, and its flaws related to accidents with possible danger to people and the whole system, emphasizing the priority of action

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The End of Course Work this aims, the hydrological cycle of water on our planet, and explain about its importance in the lives of living beings, finally, carry out a detailed analysis regarding the financial feasibility of implementing a system Shauer sustainable in the condominium, the first being the pickup of river water, which will use a reservoir for capitation and filtering, a reservoir for water storage filtered and pumps that will redirects it to outside faucets and toilets use in residences

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We know that the Earth goes through natural cycles that influence its climate and the development of their societies. In recent decades, climate changes and nature began to call world attention to the unbridled exploitation that was carried by the current economic system, causing unrest among scientific, social, political and economic world. The theory that man causes a warming in global temperatures by the release of greenhouse gases made the headlines of major newspapers in the world. From there, it was only a matter of time before environmental concerns became ownership of capital by its excessive appropriation. The fear of nuclear threat by the bombs of Hiroshima and Nagasaki left in fanfare the world, which together with the devastating impact of the exploitation of man and nature gave birth to the Environmental Revolution, a way of trying to change the development patterns of the time and behavior of the population. However, based on the historical form of capitalist domination, this was another measure that was apossada the economic system being transformed into economic value and political exchange. The origin of the conventions, meetings, conferences, parliaments set up to discuss environmental issues, eventually became forums of political and economic talks focused on environmental governance, valuing an asset that is public and everyone. Environmental and climate issue now has a value, thus turning the agenda on the agenda of the United Nations (UN) for its political and economic regulation in the form of global agreement. Given the need for understanding the climate issue, was born the Conference of the Parties (COPs), a regulatory body for climate negotiations, surrounded interests, complexities, conflicts and disagreements between the parties countries, which becomes clear when we analyze their agreements...

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The modernization of the world made the speed, accuracy and reliability of all existing processes become increasingly necessary. For this evolution to occur every day, the evolution of the equipment was strategic, but not as much as needed. It is necessary for such equipment to ensure its function and, in case of failure, an early diagnosis to prevent loss. Therefore the evolution of maintainability and reliability in equipment is also paramount. Thus, the growth of forms of maintenance was driven by this scenario, forming maintenance philosophies. Among many, there is the RCM, which have its focus on the identification, parameters development and performance preview. One of those methodologies from this idea is the FMEA, process that has been studied and implemented this work, aiming the anticipation of failure modes and guidance for the use of a heat exchanger and a pump. This implementation has the aid of another process of RCM, the PHA, which was also shown and implemented, these results being used to start the FMEA process. The results show the activities with the highest chance of failure, presenting also the measures to be taken to avoid or minimize them. It is shown, in this paper, concern with the valves because they maintain control and system security, and its flaws related to accidents with possible danger to people and the whole system, emphasizing the priority of action