848 resultados para Bio-economic index
Resumo:
The jambu belongs to the family Asteraceae, tropical crop, nowadays, this plant has been considered as a promising vegetable crop, because to its pharmacological properties. Despite this novelty, the vegetable remains invisible in the statistics of production and market in the state of Para, Brazil. This research was carried out with the aim of comparing the economic productivity and phenological development by the morpho-physiological growth indexes of two cultivars of jambu organic manure and mineral fertilizers. The experiment was carried out at the Sao Manuel Experimental Farm (Sao Manuel-SP), which belongs to the Faculdade de Ciencias Agronomicas - UNESP, campus Botucatu. The experimental design was a factorial randomized blocks (2 x 2) with two fertilization (organic and mineral) and two cultivars (Jambuarana and Nazareth), with six replications, two fertilization (organic and mineral) and two cultivars (Jambuarana and Nazareth). The following characteristics were evaluated: Plant height (cm), Leaf area (cm(2)), Fresh mass (g), Dry mass (g), Leaf area index (LAI), Leaf area ratio (LAR), Specific leaf Area (SLA), Leaf Weight Ratio (LWR), Amount of water in the plant (QAPA) (g per plant set), Leaf specific weight (LSW) (g cm(-2) per plant set) and Economic productivity. All data were statistically analyzed by analysis of variance and the Tukey test (1%) for mean comparison, with the software SISVAR. In the conditions of this experiment was carried out, it was possible to verify that the cultivar Jamburana had not only a good agronomic development and economic productivity under organic fertilization but also the best morpho-physiological indexes, showing that this kind of fertilization increases the agronomic effectiveness of this cultivar.
Resumo:
An outcome of economic growth is increased employment, but this should not be the only measure to assess a country's labour market, it is also important to verify whether the jobs created are considered good jobs. Thus, this study analyses the Brazilian labour market from 2000 to 2009, in terms of the quantity and quality of jobs generated in this period. To this end, a descriptive analysis was performed, in addition to an evaluation using econometrics and the data envelopment analysis (DEA) technique. The results of the research indicated that the Brazilian labour market is growing in terms of its quality.
Resumo:
Pós-graduação em Engenharia Mecânica - FEG
Resumo:
This research deals with the deepening and use of an environmental accounting matrix in Emilia-Romagna, RAMEA air emissions (regional NAMEA), carried out by the Regional Environment Agency (Arpa) in an European project. After a depiction of the international context regarding the widespread needing to integrate economic indicators and go beyond conventional reporting system, this study explains the structure, update and development of the tool. The overall aim is to outline the matrix for environmental assessments of regional plans, draw up sustainable reports and monitor effects of regional policies in a sustainable development perspective. The work focused on an application of a Shift-Share model, on the integration with eco-taxes, industrial waste production, energy consumptions, on applications of the extended RAMEA as a policy tool, following Eurostat guidelines. The common thread is the eco-efficiency (economic-environmental efficiency) index. The first part, in English, treats the methodology used to build a more complete tool; in the second part RAMEA has been applied on two regional case studies, in Italian, to support decision makers regarding Strategic Environmental Assessments’ processes (2001/42/EC). The aim is to support an evidence-based policy making by integrating sustainable development concerns at all levels. The first case study regards integrated environmental-economic analyses in support to the SEA of the Regional Waste management plan. For the industrial waste production an extended and updated RAMEA has been developed as a useful policy tool, to help in analysing and monitoring the state of environmental-economic performances. The second case study deals with the environmental report for the SEA of the Regional Program concerning productive activities. RAMEA has been applied aiming to an integrated environmental-economic analysis of the context, to investigate the performances of the regional production chains and to depict and monitor the area where the program should be carried out, from an integrated environmental-economic perspective.
Resumo:
This research primarily represents a contribution to the lobbying regulation research arena. It introduces an index which for the first time attempts to measure the direct compliance costs of lobbying regulation. The Cost Indicator Index (CII) offers a brand new platform for qualitative and quantitative assessment of adopted lobbying laws and proposals of those laws, both in the comparative and the sui generis dimension. The CII is not just the only new tool introduced in the last decade, but it is the only tool available for comparative assessments of the costs of lobbying regulations. Beside the qualitative contribution, the research introduces an additional theoretical framework for complementary qualitative analysis of the lobbying laws. The Ninefold theory allows a more structured assessment and classification of lobbying regulations, both by indication of benefits and costs. Lastly, this research introduces the Cost-Benefit Labels (CBL). These labels might improve an ex-ante lobbying regulation impact assessment procedure, primarily in the sui generis perspective. In its final part, the research focuses on four South East European countries (Slovenia, Serbia, Montenegro and Macedonia), and for the first time brings them into the discussion and calculates their CPI and CII scores. The special focus of the application was on Serbia, whose proposal on the Law on Lobbying has been extensively analysed in qualitative and quantitative terms, taking into consideration specific political and economic circumstances of the country. Although the obtained results are of an indicative nature, the CII will probably find its place within the academic and policymaking arena, and will hopefully contribute to a better understanding of lobbying regulations worldwide.
Resumo:
Coral reefs are the most biodiverse ecosystems of the ocean and they provide notable ecosystem services. Nowadays, they are facing a number of local anthropogenic threats and environmental change is threatening their survivorship on a global scale. Large-scale monitoring is necessary to understand environmental changes and to perform useful conservation measurements. Governmental agencies are often underfunded and are not able of sustain the necessary spatial and temporal large-scale monitoring. To overcome the economic constrains, in some cases scientists can engage volunteers in environmental monitoring. Citizen Science enables the collection and analysis of scientific data at larger spatial and temporal scales than otherwise possible, addressing issues that are otherwise logistically or financially unfeasible. “STE: Scuba Tourism for the Environment” was a volunteer-based Red Sea coral reef biodiversity monitoring program. SCUBA divers and snorkelers were involved in the collection of data for 72 taxa, by completing survey questionnaires after their dives. In my thesis, I evaluated the reliability of the data collected by volunteers, comparing their questionnaires with those completed by professional scientists. Validation trials showed a sufficient level of reliability, indicating that non-specialists performed similarly to conservation volunteer divers on accurate transects. Using the data collected by volunteers, I developed a biodiversity index that revealed spatial trends across surveyed areas. The project results provided important feedbacks to the local authorities on the current health status of Red Sea coral reefs and on the effectiveness of the environmental management. I also analysed the spatial and temporal distribution of each surveyed taxa, identifying abundance trends related with anthropogenic impacts. Finally, I evaluated the effectiveness of the project to increase the environmental education of volunteers and showed that the participation in STEproject significantly increased both the knowledge on coral reef biology and ecology and the awareness of human behavioural impacts on the environment.
Resumo:
La Fusariosi della spiga (FDS) è una fitopatia diffusa a livello mondiale che colpisce le colture cerealicole, tra cui il frumento duro, ed è in grado di causare gravi danni di tipo qualitativo ed economico. Le specie fungine responsabili appartengono al genere Fusarium, tra cui F. graminearum, F. culmorum e più recentemente F. poae. La conseguenza più rilevante riguarda la contaminazione della granella da micotossine, molecole prodotte dai miceti, considerate dalla comunità scientifica ad alto rischio per la salute dell’uomo e animali. L’eziologia è molto complessa, dal momento che su una stessa spiga di frumento possono coesistere più specie fungine che contribuiscono ad influenzare i quantitativi di micotossine prodotte. Lo scopo della ricerca è incentrato sulla caratterizzazione di ceppi di F. poae, in termini di potenziale patogeno e aggressività. Tramite l’allestimento di un saggio di inoculazione in vitro “Petri-dish” è stato possibile attribuire un indice di aggressività a ciascun isolato fungino, basato su parametri quali AUHPC e AUDPC standard, insieme ad altre variabili come la riduzione della lunghezza del coleottile e del tasso di germinazione. Il saggio è stato esteso anche a F. culmorum, per valutare la riproducibilità del test su altre specie fungine. Il test in vitro offre diversi vantaggi, tra cui affidabilità e rapidità di esecuzione ed è quindi adatto allo screening di ceppi patogeni da utilizzare in successive sperimentazioni. Gli stessi ceppi di F. poae, provenienti da una prova di inoculazione artificiale in serra su piante di frumento duro, sono stati caratterizzati dal punto di vista bio-molecolare. Poichè lo studio della fusariosi della spiga richiede la determinazione quantitativa della biomassa dei patogeni nei tessuti della pianta-ospite, anche in assenza di sintomi, il protocollo di Real-Time PCR con chimica SYBR® Green I qui sviluppato, ha dimostrato essere un buon compromesso tra attendibilità, rapidità e costi complessivi della metodica.
Resumo:
Background The reduction in the amount of food available for European avian scavengers as a consequence of restrictive public health policies is a concern for managers and conservationists. Since 2002, the application of several sanitary regulations has limited the availability of feeding resources provided by domestic carcasses, but theoretical studies assessing whether the availability of food resources provided by wild ungulates are enough to cover energetic requirements are lacking. Methodology/Findings We assessed food provided by a wild ungulate population in two areas of NE Spain inhabited by three vulture species and developed a P System computational model to assess the effects of the carrion resources provided on their population dynamics. We compared the real population trend with to a hypothetical scenario in which only food provided by wild ungulates was available. Simulation testing of the model suggests that wild ungulates constitute an important food resource in the Pyrenees and the vulture population inhabiting this area could grow if only the food provided by wild ungulates would be available. On the contrary, in the Pre-Pyrenees there is insufficient food to cover the energy requirements of avian scavenger guilds, declining sharply if biomass from domestic animals would not be available. Conclusions/Significance Our results suggest that public health legislation can modify scavenger population trends if a large number of domestic ungulate carcasses disappear from the mountains. In this case, food provided by wild ungulates could be not enough and supplementary feeding could be necessary if other alternative food resources are not available (i.e. the reintroduction of wild ungulates), preferably in European Mediterranean scenarios sharing similar and socio-economic conditions where there are low densities of wild ungulates. Managers should anticipate the conservation actions required by assessing food availability and the possible scenarios in order to make the most suitable decisions.
Resumo:
OBJECTIVE: To quantify the economic burden of in-hospital surgical site infections (SSIs) at a European university hospital. DESIGN: Matched case-control study nested in a prospective observational cohort study. SETTING: Basel University Hospital in Switzerland, where an average of 28,000 surgical procedures are performed per year. METHODS: All in-hospital occurrences of SSI associated with surgeries performed between January 1, 2000, and December 31, 2001, by the visceral, vascular, and traumatology divisions at Basel University Hospital were prospectively recorded. Each case patient was matched to a control patient by age, procedure code, and National Nosocomial Infection Surveillance System risk index. The case-control pairs were analyzed for differences in cost of hospital care and in provision of specialized care. RESULTS: A total of 6,283 procedures were performed: 187 SSIs were detected in inpatients, 168 of whom were successfully matched with a control patient. For case patients, the mean additional hospital cost was SwF-19,638 (95% confidence interval [CI], SwF-8,492-SwF-30,784); the mean additional postoperative length of hospital stay was 16.8 days (95% CI, 13-20.6 days); and the mean additional in-hospital duration of antibiotic therapy was 7.4 days (95% CI, 5.1-9.6 days). Differences were primarily attributable to organ space SSIs (n = 76). CONCLUSIONS: In a European university hospital setting, SSIs are costly and constitute a heavy and potentially preventable burden on both patients and healthcare providers.
Resumo:
This Ph.D. research is comprised of three major components; (i) Characterization study to analyze the composition of defatted corn syrup (DCS) from a dry corn mill facility (ii) Hydrolysis experiments to optimize the production of fermentable sugars and amino acid platform using DCS and (iii) Sustainability analyses. Analyses of DCS included total solids, ash content, total protein, amino acids, inorganic elements, starch, total carbohydrates, lignin, organic acids, glycerol, and presence of functional groups. Total solids content was 37.4% (± 0.4%) by weight, and the mass balance closure was 101%. Total carbohydrates [27% (± 5%) wt.] comprised of starch (5.6%), soluble monomer carbohydrates (12%) and non-starch carbohydrates (10%). Hemicellulose components (structural and non-structural) were; xylan (6%), xylose (1%), mannan (1%), mannose (0.4%), arabinan (1%), arabinose (0.4%), galatactan (3%) and galactose (0.4%). Based on the measured physical and chemical components, bio-chemical conversion route and subsequent fermentation to value added products was identified as promising. DCS has potential to serve as an important fermentation feedstock for bio-based chemicals production. In the sugar hydrolysis experiments, reaction parameters such as acid concentration and retention time were analyzed to determine the optimal conditions to maximize monomer sugar yields while keeping the inhibitors at minimum. Total fermentable sugars produced can reach approximately 86% of theoretical yield when subjected to dilute acid pretreatment (DAP). DAP followed by subsequent enzymatic hydrolysis was most effective for 0 wt% acid hydrolysate samples and least efficient towards 1 and 2 wt% acid hydrolysate samples. The best hydrolysis scheme DCS from an industry's point of view is standalone 60 minutes dilute acid hydrolysis at 2 wt% acid concentration. The combined effect of hydrolysis reaction time, temperature and ratio of enzyme to substrate ratio to develop hydrolysis process that optimizes the production of amino acids in DCS were studied. Four key hydrolysis pathways were investigated for the production of amino acids using DCS. The first hydrolysis pathway is the amino acid analysis using DAP. The second pathway is DAP of DCS followed by protein hydrolysis using proteases [Trypsin, Pronase E (Streptomyces griseus) and Protex 6L]. The third hydrolysis pathway investigated a standalone experiment using proteases (Trypsin, Pronase E, Protex 6L, and Alcalase) on the DCS without any pretreatment. The final pathway investigated the use of Accellerase 1500® and Protex 6L to simultaneously produce fermentable sugars and amino acids over a 24 hour hydrolysis reaction time. The 3 key objectives of the techno-economic analysis component of this PhD research included; (i) Development of a process design for the production of both the sugar and amino acid platforms with DAP using DCS (ii) A preliminary cost analysis to estimate the initial capital cost and operating cost of this facility (iii) A greenhouse gas analysis to understand the environmental impact of this facility. Using Aspen Plus®, a conceptual process design has been constructed. Finally, both Aspen Plus Economic Analyzer® and Simapro® sofware were employed to conduct the cost analysis as well as the carbon footprint emissions of this process facility respectively. Another section of my PhD research work focused on the life cycle assessment (LCA) of commonly used dairy feeds in the U.S. Greenhouse gas (GHG) emissions analysis was conducted for cultivation, harvesting, and production of common dairy feeds used for the production of dairy milk in the U.S. The goal was to determine the carbon footprint [grams CO2 equivalents (gCO2e)/kg of dry feed] in the U.S. on a regional basis, identify key inputs, and make recommendations for emissions reduction. The final section of my Ph.D. research work was an LCA of a single dairy feed mill located in Michigan, USA. The primary goal was to conduct a preliminary assessment of dairy feed mill operations and ultimately determine the GHG emissions for 1 kilogram of milled dairy feed.
Resumo:
Consequence analysis is a key aspect of anchoring assessment of landslide impacts to present and long-term development planning. Although several approaches have been developed over the last decade, some of them are difficult to apply in practice, mainly because of the lack of valuable data on historical damages or on damage functions. In this paper, two possible consequence indicators based on a combination of descriptors of the exposure of the elements at risk are proposed in order to map the potential impacts of landslides and highlight the most vulnerable areas. The first index maps the physical vulnerability due to landslide; the second index maps both direct damage (physical, structural, functional) and indirect damage (socio-economic impacts) of landslide hazards. The indexes have been computed for the 200 km2 area of the Barcelonnette Basin (South French Alps), and their potential applications are discussed.
Resumo:
OBJECTIVE Algorithms to predict the future long-term risk of patients with stable coronary artery disease (CAD) are rare. The VIenna and Ludwigshafen CAD (VILCAD) risk score was one of the first scores specifically tailored for this clinically important patient population. The aim of this study was to refine risk prediction in stable CAD creating a new prediction model encompassing various pathophysiological pathways. Therefore, we assessed the predictive power of 135 novel biomarkers for long-term mortality in patients with stable CAD. DESIGN, SETTING AND SUBJECTS We included 1275 patients with stable CAD from the LUdwigshafen RIsk and Cardiovascular health study with a median follow-up of 9.8 years to investigate whether the predictive power of the VILCAD score could be improved by the addition of novel biomarkers. Additional biomarkers were selected in a bootstrapping procedure based on Cox regression to determine the most informative predictors of mortality. RESULTS The final multivariable model encompassed nine clinical and biochemical markers: age, sex, left ventricular ejection fraction (LVEF), heart rate, N-terminal pro-brain natriuretic peptide, cystatin C, renin, 25OH-vitamin D3 and haemoglobin A1c. The extended VILCAD biomarker score achieved a significantly improved C-statistic (0.78 vs. 0.73; P = 0.035) and net reclassification index (14.9%; P < 0.001) compared to the original VILCAD score. Omitting LVEF, which might not be readily measureable in clinical practice, slightly reduced the accuracy of the new BIO-VILCAD score but still significantly improved risk classification (net reclassification improvement 12.5%; P < 0.001). CONCLUSION The VILCAD biomarker score based on routine parameters complemented by novel biomarkers outperforms previous risk algorithms and allows more accurate classification of patients with stable CAD, enabling physicians to choose more personalized treatment regimens for their patients.
Resumo:
BACKGROUND Hand eczema (HE) is a common skin disease with major medical psychological and socio-economic implications. Onset and prognosis of HE are determined by individual as well as environmental factors. So far, most epidemiological data on HE have been reported from Scandinavian and recently German studies. OBJECTIVE To investigate the characteristics and medical care of patients with chronic HE (CHE) in Switzerland, and identify risk factors. METHODS In this cross-sectional study, data from patients with chronic HE were obtained by means of medical history, dermatological examination and patient questionnaires. Multiple logistic regression analysis was applied to identify risk factors for high severity and dermatology life quality index (DLQI). RESULTS In seven dermatology departments, 199 patients (mean age 40.4 years, 50.8% female) with CHE (mean duration 6.6 years) were enrolled. Moderate to severe HE was reported by 70.9% of patients, and was associated with age <30 or >50 years, localization of lesions and pruritus. Because of the CHE, 37.3% of patients were on sick leave over the past 12 months, 14.8% had changed or lost their job. Practically all patients applied topical therapy, 21% were treated with alitretinoin, and 21% with psoralen plus UVA light (PUVA). The effects on the health-related quality of life was moderate to large in 33.7% and 39.4% of CHE patients, respectively. Factors associated with a high impact on DLQI (mean 9.7 ± 5.8) were female sex, lesions on back of the hands and pruritus as well as mechanical skin irritation and wearing gloves. CONCLUSION In agreement with recent studies, the Swiss data demonstrate the high impact of CHE on medical well-being, patient quality of life and work ability. As it is associated with an intense use of health care services, high rate of sick leave, job loss and change, CHE may cause a high socio-economic burden.