Modelling body mass index and endometrial cancer risk in a pooled-analysis of three case-control studies.

OBJECTIVE: To quantify the relation between body mass index (BMI) and endometrial cancer risk, and to describe the shape of such a relation. DESIGN: Pooled analysis of three hospital-based case-control studies. SETTING: Italy and Switzerland. POPULATION: A total of 1449 women with endometrial cancer and 3811 controls. METHODS: Multivariate odds ratios (OR) and 95% confidence intervals (95% CI) were obtained from logistic regression models. The shape of the relation was determined using a class of flexible regression models. MAIN OUTCOME MEASURE: The relation of BMI with endometrial cancer. RESULTS: Compared with women with BMI 18.5 to <25 kg/m(2) , the odds ratio was 5.73 (95% CI 4.28-7.68) for women with a BMI ≥35 kg/m(2) . The odds ratios were 1.10 (95% CI 1.09-1.12) and 1.63 (95% CI 1.52-1.75) respectively for an increment of BMI of 1 and 5 units. The relation was stronger in never-users of oral contraceptives (OR 3.35, 95% CI 2.78-4.03, for BMI ≥30 versus <25 kg/m(2) ) than in users (OR 1.22, 95% CI 0.56-2.67), and in women with diabetes (OR 8.10, 95% CI 4.10-16.01, for BMI ≥30 versus <25 kg/m(2) ) than in those without diabetes (OR 2.95, 95% CI 2.44-3.56). The relation was best fitted by a cubic model, although after the exclusion of the 5% upper and lower tails, it was best fitted by a linear model. CONCLUSIONS: The results of this study confirm a role of elevated BMI in the aetiology of endometrial cancer and suggest that the risk in obese women increases in a cubic nonlinear fashion. The relation was stronger in never-users of oral contraceptives and in women with diabetes. TWEETABLE ABSTRACT: Risk of endometrial cancer increases with elevated body weight in a cubic nonlinear fashion.

Worldwide trends in diabetes since 1980: a pooled analysis of 751 population-based studies with 4.4 million participants.

One of the global targets for non-communicable diseases is to halt, by 2025, the rise in the age-standardised adult prevalence of diabetes at its 2010 levels. We aimed to estimate worldwide trends in diabetes, how likely it is for countries to achieve the global target, and how changes in prevalence, together with population growth and ageing, are affecting the number of adults with diabetes. We pooled data from population-based studies that had collected data on diabetes through measurement of its biomarkers. We used a Bayesian hierarchical model to estimate trends in diabetes prevalence-defined as fasting plasma glucose of 7.0 mmol/L or higher, or history of diagnosis with diabetes, or use of insulin or oral hypoglycaemic drugs-in 200 countries and territories in 21 regions, by sex and from 1980 to 2014. We also calculated the posterior probability of meeting the global diabetes target if post-2000 trends continue. We used data from 751 studies including 4,372,000 adults from 146 of the 200 countries we make estimates for. Global age-standardised diabetes prevalence increased from 4.3% (95% credible interval 2.4-7.0) in 1980 to 9.0% (7.2-11.1) in 2014 in men, and from 5.0% (2.9-7.9) to 7.9% (6.4-9.7) in women. The number of adults with diabetes in the world increased from 108 million in 1980 to 422 million in 2014 (28.5% due to the rise in prevalence, 39.7% due to population growth and ageing, and 31.8% due to interaction of these two factors). Age-standardised adult diabetes prevalence in 2014 was lowest in northwestern Europe, and highest in Polynesia and Micronesia, at nearly 25%, followed by Melanesia and the Middle East and north Africa. Between 1980 and 2014 there was little change in age-standardised diabetes prevalence in adult women in continental western Europe, although crude prevalence rose because of ageing of the population. By contrast, age-standardised adult prevalence rose by 15 percentage points in men and women in Polynesia and Micronesia. In 2014, American Samoa had the highest national prevalence of diabetes (>30% in both sexes), with age-standardised adult prevalence also higher than 25% in some other islands in Polynesia and Micronesia. If post-2000 trends continue, the probability of meeting the global target of halting the rise in the prevalence of diabetes by 2025 at the 2010 level worldwide is lower than 1% for men and is 1% for women. Only nine countries for men and 29 countries for women, mostly in western Europe, have a 50% or higher probability of meeting the global target. Since 1980, age-standardised diabetes prevalence in adults has increased, or at best remained unchanged, in every country. Together with population growth and ageing, this rise has led to a near quadrupling of the number of adults with diabetes worldwide. The burden of diabetes, both in terms of prevalence and number of adults affected, has increased faster in low-income and middle-income countries than in high-income countries. Wellcome Trust.

Trends in adult body-mass index in 200 countries from 1975 to 2014: a pooled analysis of 1698 population-based measurement studies with 19·2 million participants.

BACKGROUND: Underweight and severe and morbid obesity are associated with highly elevated risks of adverse health outcomes. We estimated trends in mean body-mass index (BMI), which characterises its population distribution, and in the prevalences of a complete set of BMI categories for adults in all countries. METHODS: We analysed, with use of a consistent protocol, population-based studies that had measured height and weight in adults aged 18 years and older. We applied a Bayesian hierarchical model to these data to estimate trends from 1975 to 2014 in mean BMI and in the prevalences of BMI categories (<18·5 kg/m(2) [underweight], 18·5 kg/m(2) to <20 kg/m(2), 20 kg/m(2) to <25 kg/m(2), 25 kg/m(2) to <30 kg/m(2), 30 kg/m(2) to <35 kg/m(2), 35 kg/m(2) to <40 kg/m(2), ≥40 kg/m(2) [morbid obesity]), by sex in 200 countries and territories, organised in 21 regions. We calculated the posterior probability of meeting the target of halting by 2025 the rise in obesity at its 2010 levels, if post-2000 trends continue. FINDINGS: We used 1698 population-based data sources, with more than 19·2 million adult participants (9·9 million men and 9·3 million women) in 186 of 200 countries for which estimates were made. Global age-standardised mean BMI increased from 21·7 kg/m(2) (95% credible interval 21·3-22·1) in 1975 to 24·2 kg/m(2) (24·0-24·4) in 2014 in men, and from 22·1 kg/m(2) (21·7-22·5) in 1975 to 24·4 kg/m(2) (24·2-24·6) in 2014 in women. Regional mean BMIs in 2014 for men ranged from 21·4 kg/m(2) in central Africa and south Asia to 29·2 kg/m(2) (28·6-29·8) in Polynesia and Micronesia; for women the range was from 21·8 kg/m(2) (21·4-22·3) in south Asia to 32·2 kg/m(2) (31·5-32·8) in Polynesia and Micronesia. Over these four decades, age-standardised global prevalence of underweight decreased from 13·8% (10·5-17·4) to 8·8% (7·4-10·3) in men and from 14·6% (11·6-17·9) to 9·7% (8·3-11·1) in women. South Asia had the highest prevalence of underweight in 2014, 23·4% (17·8-29·2) in men and 24·0% (18·9-29·3) in women. Age-standardised prevalence of obesity increased from 3·2% (2·4-4·1) in 1975 to 10·8% (9·7-12·0) in 2014 in men, and from 6·4% (5·1-7·8) to 14·9% (13·6-16·1) in women. 2·3% (2·0-2·7) of the world's men and 5·0% (4·4-5·6) of women were severely obese (ie, have BMI ≥35 kg/m(2)). Globally, prevalence of morbid obesity was 0·64% (0·46-0·86) in men and 1·6% (1·3-1·9) in women. INTERPRETATION: If post-2000 trends continue, the probability of meeting the global obesity target is virtually zero. Rather, if these trends continue, by 2025, global obesity prevalence will reach 18% in men and surpass 21% in women; severe obesity will surpass 6% in men and 9% in women. Nonetheless, underweight remains prevalent in the world's poorest regions, especially in south Asia. FUNDING: Wellcome Trust, Grand Challenges Canada.

Distribution and population genetic variation of cryptic species of the Alpine mayfly Baetis alpinus (Ephemeroptera: Baetidae) in the Central Alps.

BACKGROUND: Many species contain evolutionarily distinct groups that are genetically highly differentiated but morphologically difficult to distinguish (i.e., cryptic species). The presence of cryptic species poses significant challenges for the accurate assessment of biodiversity and, if unrecognized, may lead to erroneous inferences in many fields of biological research and conservation. RESULTS: We tested for cryptic genetic variation within the broadly distributed alpine mayfly Baetis alpinus across several major European drainages in the central Alps. Bayesian clustering and multivariate analyses of nuclear microsatellite loci, combined with phylogenetic analyses of mitochondrial DNA, were used to assess population genetic structure and diversity. We identified two genetically highly differentiated lineages (A and B) that had no obvious differences in regional distribution patterns, and occurred in local sympatry. Furthermore, the two lineages differed in relative abundance, overall levels of genetic diversity as well as patterns of population structure: lineage A was abundant, widely distributed and had a higher level of genetic variation, whereas lineage B was less abundant, more prevalent in spring-fed tributaries than glacier-fed streams and restricted to high elevations. Subsequent morphological analyses revealed that traits previously acknowledged as intraspecific variation of B. alpinus in fact segregated these two lineages. CONCLUSIONS: Taken together, our findings indicate that even common and apparently ecologically well-studied species may consist of reproductively isolated units, with distinct evolutionary histories and likely different ecology and evolutionary potential. These findings emphasize the need to investigate hidden diversity even in well-known species to allow for appropriate assessment of biological diversity and conservation measures.

Population connectivity buffers genetic diversity loss in a seabird

Background Ancient DNA has revolutionized conservation genetic studies as it allows monitoring of the genetic variability of species through time and predicting the impact of ecosystems" threats on future population dynamics and viability. Meanwhile, the consequences of anthropogenic activities and climate change to island faunas, particularly seabirds, remain largely unknown. In this study, we examined temporal changes in the genetic diversity of a threatened seabird, the Cory"s shearwater (Calonectris borealis). Findings We analysed the mitochondrial DNA control region of ancient bone samples from the late-Holocene retrieved from the Canary archipelago (NE Atlantic) together with modern DNA sequences representative of the entire breeding range of the species. Our results show high levels of ancient genetic diversity in the Canaries comparable to that of the extant population. The temporal haplotype network further revealed rare but recurrent long-distance dispersal between ocean basins. The Bayesian demographic analyses reveal both regional and local population size expansion events, and this is in spite of the demographic decline experienced by the species over the last millennia. Conclusions Our findings suggest that population connectivity of the species has acted as a buffer of genetic losses and illustrate the use of ancient DNA to uncover such cryptic genetic events.

Ultrafine grinding of FGD and phosphogypsum with an attrition bead mill and a jet mill : optimisation and modelling of grinding and mill comparison

Fine powders of minerals are used commonly in the paper and paint industry, and for ceramics. Research for utilizing of different waste materials in these applications is environmentally important. In this work, the ultrafine grinding of two waste gypsum materials, namely FGD (Flue Gas Desulphurisation) gypsum and phosphogypsum from a phosphoric acid plant, with the attrition bead mill and with the jet mill has been studied. The ' objective of this research was to test the suitability of the attrition bead mill and of the jet mill to produce gypsum powders with a particle size of a few microns. The grinding conditions were optimised by studying the influences of different operational grinding parameters on the grinding rate and on the energy consumption of the process in order to achieve a product fineness such as that required in the paper industry with as low energy consumption as possible. Based on experimental results, the most influential parameters in the attrition grinding were found to be the bead size, the stirrer type, and the stirring speed. The best conditions, based on the product fineness and specific energy consumption of grinding, for the attrition grinding process is to grind the material with small grinding beads and a high rotational speed of the stirrer. Also, by using some suitable grinding additive, a finer product is achieved with a lower energy consumption. In jet mill grinding the most influential parameters were the feed rate, the volumetric flow rate of the grinding air, and the height of the internal classification tube. The optimised condition for the jet is to grind with a small feed rate and with a large rate of volumetric flow rate of grinding air when the inside tube is low. The finer product with a larger rate of production was achieved with the attrition bead mill than with the jet mill, thus the attrition grinding is better for the ultrafine grinding of gypsum than the jet grinding. Finally the suitability of the population balance model for simulation of grinding processes has been studied with different S , B , and C functions. A new S function for the modelling of an attrition mill and a new C function for the modelling of a jet mill were developed. The suitability of the selected models with the developed grinding functions was tested by curve fitting the particle size distributions of the grinding products and then comparing the fitted size distributions to the measured particle sizes. According to the simulation results, the models are suitable for the estimation and simulation of the studied grinding processes.

Mechanistic population Models in Biology: Model Derivation and Application

In general, models of ecological systems can be broadly categorized as ’top-down’ or ’bottom-up’ models, based on the hierarchical level that the model processes are formulated on. The structure of a top-down, also known as phenomenological, population model can be interpreted in terms of population characteristics, but it typically lacks an interpretation on a more basic level. In contrast, bottom-up, also known as mechanistic, population models are derived from assumptions and processes on a more basic level, which allows interpretation of the model parameters in terms of individual behavior. Both approaches, phenomenological and mechanistic modelling, can have their advantages and disadvantages in different situations. However, mechanistically derived models might be better at capturing the properties of the system at hand, and thus give more accurate predictions. In particular, when models are used for evolutionary studies, mechanistic models are more appropriate, since natural selection takes place on the individual level, and in mechanistic models the direct connection between model parameters and individual properties has already been established. The purpose of this thesis is twofold. Firstly, a systematical way to derive mechanistic discrete-time population models is presented. The derivation is based on combining explicitly modelled, continuous processes on the individual level within a reproductive period with a discrete-time maturation process between reproductive periods. Secondly, as an example of how evolutionary studies can be carried out in mechanistic models, the evolution of the timing of reproduction is investigated. Thus, these two lines of research, derivation of mechanistic population models and evolutionary studies, are complementary to each other.

Bayesian methods for estimation, optimization and experimental design

Mathematical models often contain parameters that need to be calibrated from measured data. The emergence of efficient Markov Chain Monte Carlo (MCMC) methods has made the Bayesian approach a standard tool in quantifying the uncertainty in the parameters. With MCMC, the parameter estimation problem can be solved in a fully statistical manner, and the whole distribution of the parameters can be explored, instead of obtaining point estimates and using, e.g., Gaussian approximations. In this thesis, MCMC methods are applied to parameter estimation problems in chemical reaction engineering, population ecology, and climate modeling. Motivated by the climate model experiments, the methods are developed further to make them more suitable for problems where the model is computationally intensive. After the parameters are estimated, one can start to use the model for various tasks. Two such tasks are studied in this thesis: optimal design of experiments, where the task is to design the next measurements so that the parameter uncertainty is minimized, and model-based optimization, where a model-based quantity, such as the product yield in a chemical reaction model, is optimized. In this thesis, novel ways to perform these tasks are developed, based on the output of MCMC parameter estimation. A separate topic is dynamical state estimation, where the task is to estimate the dynamically changing model state, instead of static parameters. For example, in numerical weather prediction, an estimate of the state of the atmosphere must constantly be updated based on the recently obtained measurements. In this thesis, a novel hybrid state estimation method is developed, which combines elements from deterministic and random sampling methods.

A Bayesian Approach for Forecasting Heat Load in a District Heating System

The growing population in cities increases the energy demand and affects the environment by increasing carbon emissions. Information and communications technology solutions which enable energy optimization are needed to address this growing energy demand in cities and to reduce carbon emissions. District heating systems optimize the energy production by reusing waste energy with combined heat and power plants. Forecasting the heat load demand in residential buildings assists in optimizing energy production and consumption in a district heating system. However, the presence of a large number of factors such as weather forecast, district heating operational parameters and user behavioural parameters, make heat load forecasting a challenging task. This thesis proposes a probabilistic machine learning model using a Naive Bayes classifier, to forecast the hourly heat load demand for three residential buildings in the city of Skellefteå, Sweden over a period of winter and spring seasons. The district heating data collected from the sensors equipped at the residential buildings in Skellefteå, is utilized to build the Bayesian network to forecast the heat load demand for horizons of 1, 2, 3, 6 and 24 hours. The proposed model is validated by using four cases to study the influence of various parameters on the heat load forecast by carrying out trace driven analysis in Weka and GeNIe. Results show that current heat load consumption and outdoor temperature forecast are the two parameters with most influence on the heat load forecast. The proposed model achieves average accuracies of 81.23 % and 76.74 % for a forecast horizon of 1 hour in the three buildings for winter and spring seasons respectively. The model also achieves an average accuracy of 77.97 % for three buildings across both seasons for the forecast horizon of 1 hour by utilizing only 10 % of the training data. The results indicate that even a simple model like Naive Bayes classifier can forecast the heat load demand by utilizing less training data.

Bayesian analysis of SEIR epidemic models

This thesis concerns the analysis of epidemic models. We adopt the Bayesian paradigm and develop suitable Markov Chain Monte Carlo (MCMC) algorithms. This is done by considering an Ebola outbreak in the Democratic Republic of Congo, former Zaïre, 1995 as a case of SEIR epidemic models. We model the Ebola epidemic deterministically using ODEs and stochastically through SDEs to take into account a possible bias in each compartment. Since the model has unknown parameters, we use different methods to estimate them such as least squares, maximum likelihood and MCMC. The motivation behind choosing MCMC over other existing methods in this thesis is that it has the ability to tackle complicated nonlinear problems with large number of parameters. First, in a deterministic Ebola model, we compute the likelihood function by sum of square of residuals method and estimate parameters using the LSQ and MCMC methods. We sample parameters and then use them to calculate the basic reproduction number and to study the disease-free equilibrium. From the sampled chain from the posterior, we test the convergence diagnostic and confirm the viability of the model. The results show that the Ebola model fits the observed onset data with high precision, and all the unknown model parameters are well identified. Second, we convert the ODE model into a SDE Ebola model. We compute the likelihood function using extended Kalman filter (EKF) and estimate parameters again. The motivation of using the SDE formulation here is to consider the impact of modelling errors. Moreover, the EKF approach allows us to formulate a filtered likelihood for the parameters of such a stochastic model. We use the MCMC procedure to attain the posterior distributions of the parameters of the SDE Ebola model drift and diffusion parts. In this thesis, we analyse two cases: (1) the model error covariance matrix of the dynamic noise is close to zero , i.e. only small stochasticity added into the model. The results are then similar to the ones got from deterministic Ebola model, even if methods of computing the likelihood function are different (2) the model error covariance matrix is different from zero, i.e. a considerable stochasticity is introduced into the Ebola model. This accounts for the situation where we would know that the model is not exact. As a results, we obtain parameter posteriors with larger variances. Consequently, the model predictions then show larger uncertainties, in accordance with the assumption of an incomplete model.

Pantoprazole intraveineux aux soins intensifs pédiatriques: un modèle de pharmacocinétique de population

Objectifs : Définir les paramètres pharmacocinétiques du pantoprazole intraveineux en soins intensifs pédiatriques et déterminer l’influence qu’exercent sur ceux-ci les facteurs démographiques, le syndrome de réponse inflammatoire systémique (SRIS), la dysfonction hépatique et l’administration d’un inhibiteur du cytochrome (CYP) 2C19. Méthode : Cent cinquante-six concentrations plasmatiques de pantoprazole provenant d’une population de 20 patients (âgés de 10 jours à 16.4 ans) à risque ou atteints d’une hémorragie gastroduodénale de stress, ayant reçu des doses quotidiennes de pantoprazole de 19.9 à 140.6 mg/1.73m2, ont été analysées selon les méthodes non compartimentale et de modélisation non linéaire à effets mixtes. Résultats : Une clairance médiane (CL) de 0.14 L/h/kg, un volume apparent de distribution de 0.20 L/kg et une demi-vie d’élimination de 1.7 h ont été déterminés via l’approche non compartimentale. Le modèle populationnel à deux compartiments avec une infusion d’ordre zéro et une élimination d’ordre un représentait fidèlement la cinétique du pantoprazole. Le poids, le SRIS, la dysfonction hépatique et l’administration d’un inhibiteur du CYP2C19 constituaient les covariables significatives rendant compte de 75 % de la variabilité interindividuelle observée pour la CL. Seul le poids influençait significativement le volume central de distribution (Vc). Selon les estimations du modèle final, un enfant de cinq ans pesant 20 kg avait une CL de 5.28 L/h et un Vc de 2.22 L. La CL du pantoprazole augmentait selon l’âge et le poids tandis qu’elle diminuait respectivement de 62.3%, 65.8% et 50.5% en présence d’un SRIS, d’un inhibiteur du CYP2C19 ou d’une dysfonction hépatique. Conclusion : Ces résultats permettront de guider les cliniciens dans le choix d’une dose de charge et dans l’ajustement des posologies du pantoprazole en soins intensifs pédiatriques dépendamment de facteurs fréquemment rencontrés dans cette population.

Modelling software quality : a multidimensional approach

Les sociétés modernes dépendent de plus en plus sur les systèmes informatiques et ainsi, il y a de plus en plus de pression sur les équipes de développement pour produire des logiciels de bonne qualité. Plusieurs compagnies utilisent des modèles de qualité, des suites de programmes qui analysent et évaluent la qualité d'autres programmes, mais la construction de modèles de qualité est difficile parce qu'il existe plusieurs questions qui n'ont pas été répondues dans la littérature. Nous avons étudié les pratiques de modélisation de la qualité auprès d'une grande entreprise et avons identifié les trois dimensions où une recherche additionnelle est désirable : Le support de la subjectivité de la qualité, les techniques pour faire le suivi de la qualité lors de l'évolution des logiciels, et la composition de la qualité entre différents niveaux d'abstraction. Concernant la subjectivité, nous avons proposé l'utilisation de modèles bayésiens parce qu'ils sont capables de traiter des données ambiguës. Nous avons appliqué nos modèles au problème de la détection des défauts de conception. Dans une étude de deux logiciels libres, nous avons trouvé que notre approche est supérieure aux techniques décrites dans l'état de l'art, qui sont basées sur des règles. Pour supporter l'évolution des logiciels, nous avons considéré que les scores produits par un modèle de qualité sont des signaux qui peuvent être analysés en utilisant des techniques d'exploration de données pour identifier des patrons d'évolution de la qualité. Nous avons étudié comment les défauts de conception apparaissent et disparaissent des logiciels. Un logiciel est typiquement conçu comme une hiérarchie de composants, mais les modèles de qualité ne tiennent pas compte de cette organisation. Dans la dernière partie de la dissertation, nous présentons un modèle de qualité à deux niveaux. Ces modèles ont trois parties: un modèle au niveau du composant, un modèle qui évalue l'importance de chacun des composants, et un autre qui évalue la qualité d'un composé en combinant la qualité de ses composants. L'approche a été testée sur la prédiction de classes à fort changement à partir de la qualité des méthodes. Nous avons trouvé que nos modèles à deux niveaux permettent une meilleure identification des classes à fort changement. Pour terminer, nous avons appliqué nos modèles à deux niveaux pour l'évaluation de la navigabilité des sites web à partir de la qualité des pages. Nos modèles étaient capables de distinguer entre des sites de très bonne qualité et des sites choisis aléatoirement. Au cours de la dissertation, nous présentons non seulement des problèmes théoriques et leurs solutions, mais nous avons également mené des expériences pour démontrer les avantages et les limitations de nos solutions. Nos résultats indiquent qu'on peut espérer améliorer l'état de l'art dans les trois dimensions présentées. En particulier, notre travail sur la composition de la qualité et la modélisation de l'importance est le premier à cibler ce problème. Nous croyons que nos modèles à deux niveaux sont un point de départ intéressant pour des travaux de recherche plus approfondis.

Optimisation de l’administration des médicaments chez les enfants transplantés grâce à la pharmacocinétique de population

Ce travail de thèse porte sur l’application de la pharmacocinétique de population dans le but d’optimiser l’utilisation de certains médicaments chez les enfants immunosupprimés et subissant une greffe. Parmi les différents médicaments utilisés chez les enfants immunosupprimés, l’utilisation du busulfan, du tacrolimus et du voriconazole reste problématique, notamment à cause d’une très grande variabilité interindividuelle de leur pharmacocinétique rendant nécessaire l’individualisation des doses par le suivi thérapeutique pharmacologique. De plus, ces médicaments n’ont pas fait l’objet d’études chez les enfants et les doses sont adaptées à partir des adultes. Cette dernière pratique ne prend pas en compte les particularités pharmacologiques qui caractérisent l’enfant tout au long de son développement et rend illusoire l’extrapolation aux enfants des données acquises chez les adultes. Les travaux effectués dans le cadre de cette thèse ont étudié successivement la pharmacocinétique du busulfan, du voriconazole et du tacrolimus par une approche de population en une étape (modèles non-linéaires à effets mixtes). Ces modèles ont permis d’identifier les principales sources de variabilités interindividuelles sur les paramètres pharmacocinétiques. Les covariables identifiées sont la surface corporelle et le poids. Ces résultats confirment l’importance de tenir en compte l’effet de la croissance en pédiatrie. Ces paramètres ont été inclus de façon allométrique dans les modèles. Cette approche permet de séparer l’effet de la mesure anthropométrique d’autres covariables et permet la comparaison des paramètres pharmacocinétiques en pédiatrie avec ceux des adultes. La prise en compte de ces covariables explicatives devrait permettre d’améliorer la prise en charge a priori des patients. Ces modèles développés ont été évalués pour confirmer leur stabilité, leur performance de simulation et leur capacité à répondre aux objectifs initiaux de la modélisation. Dans le cas du busulfan, le modèle validé a été utilisé pour proposer par simulation une posologie qui améliorerait l’atteinte de l’exposition cible, diminuerait l’échec thérapeutique et les risques de toxicité. Le modèle développé pour le voriconazole, a permis de confirmer la grande variabilité interindividuelle dans sa pharmacocinétique chez les enfants immunosupprimés. Le nombre limité de patients n’a pas permis d’identifier des covariables expliquant cette variabilité. Sur la base du modèle de pharmacocinétique de population du tacrolimus, un estimateur Bayesien a été mis au point, qui est le premier dans cette population de transplantés hépatiques pédiatriques. Cet estimateur permet de prédire les paramètres pharmacocinétiques et l’exposition individuelle au tacrolimus sur la base d’un nombre limité de prélèvements. En conclusion, les travaux de cette thèse ont permis d’appliquer la pharmacocinétique de population en pédiatrie pour explorer les caractéristiques propres à cette population, de décrire la variabilité pharmacocinétique des médicaments utilisés chez les enfants immunosupprimés, en vue de l’individualisation du traitement. Les outils pharmacocinétiques développés s’inscrivent dans une démarche visant à diminuer le taux d'échec thérapeutique et l’incidence des effets indésirables ou toxiques chez les enfants immunosupprimés suite à une transplantation.

Étude de l’évolution du tropisme et de la pression sélective exercée sur le gène de l’enveloppe du virus de l’immunodéficience humaine de type 1 au cours de la grossesse et à l’échelle de la population.

Introduction. Le VIH-1 évolue en fonction de la réponse immunitaire spécifique de l’hôte. La pression sélective exercée par la réponse immunitaire VIH-spécifique de l’hôte entraine l’évolution des gènes viraux et à terme détermine l’évolution de la maladie. Cette évolution du virus à l’échelle d’un individu façonne également l’évolution du virus à l’échelle de la population et détermine le devenir de l’épidémie. Le VIH utilise les corécepteurs d’entrée CCR5 (virus R5) et CXCR4 (virus X4) afin d’infecter la cellule cible, et l’évolution du tropisme du virus de R5 vers X4, appelé switch du tropisme, est associé à la progression de la maladie. Les virus R5 sont rencontrés en début d’infection tandis que les virus X4 apparaissent en fin de maladie chez un certain de nombre de patients et sont considérés comme plus virulents. La pression sélective immunitaire exercée sur le gène de l’enveloppe (env) peut donc entrainer l’évolution du tropisme du VIH. La grossesse est un état immunitaire particulier considéré comme étant principalement caractérisé par un biais Th2 nécessaire à l’établissement de la tolérance materno-fétale. Le switch de tropisme de R5 vers X4 en grossesse n’a jamais été documenté, de même que l’évolution des déterminants du tropisme à l’échelle de la population. Hypothèses. Les changements immunitaires associés à l’initiation et la progression de la grossesse engendrent des changements dans la pression immunitaire exercée sur l’enveloppe et peuvent favoriser le switch du tropisme. L’évolution du tropisme du VIH-1 peut être observé à l’échelle de la population au même titre que l’évolution de l’enveloppe virale. Objectifs. Analyser l’évolution du tropisme et décrire la pression sélective sur l’enveloppe des femmes enceintes infectées par le VIH-1. Analyser l’évolution des déterminants du tropisme à l’échelle de la population. Méthodes. Nous avons dans un premier temps analysé l’évolution des déterminants du tropisme et déterminé le génotype et phénotype du VIH-1 chez 19 femmes enceintes issues de la cohorte du centre maternel et infantile sur le SIDA de l’hôpital Sainte-Justine (CMIS). Nous avons ensuite caractérisé et comparé la pression sélective exercée sur env, par une méthode bayésienne, chez 31 femmes enceinte et 29 femmes non-enceintes. Enfin, nous avons analysé et comparé des déterminants du tropisme entre des séquences d’enveloppe contemporaines et anciennes, issues des bases de données du NCBI. Résultats. Nos résultats montrent la présence de virus X4 chez la moitié de notre cohorte, et un switch de tropisme de R5 vers X4 chez 5/19 sujets. Les séquences des femmes enceintes présentaient des taux de substitutions plus élevées que celles des femmes non-enceintes. La pression sélective dans la région C2 était plus faible chez les femmes enceintes que chez les femmes non-enceintes, et différait dans 4 positions entre ces 2 groupes. Cette sélection diminuait au cours de la grossesse chez les patientes traitées. Enfin, une accumulation de mutations X4 a été observée dans les séquences R5 contemporaines par rapport aux séquences R5 anciennes. Conclusion. Les changements immunitaires associés à la grossesse semblent induire des modifications subtiles dans la pression sélective exercée sur env, suffisant à influencer l’évolution du tropisme de R5 vers X4. Un switch du tropisme à l’échelle de la population impliquerait une épidémie évoluant vers une plus grande virulence du virus. Nos résultats sont d’importance en ce qui concerne la prophylaxie antirétrovirale pour la santé de la mère et la prévention de la transmission mère-enfant du VIH-1. Ils sont aussi importants concernant l’avenir de la thérapie antirétrovirale dans le contexte d’une épidémie évoluant vers une plus grande virulence

Modelling and simulation of a photovoltaic fuel cell hybrid system

A stand-alone power system is an autonomous system that supplies electricity to the user load without being connected to the electric grid. This kind of decentralized system is frequently located in remote and inaccessible areas. It is essential for about one third of the world population which are living in developed or isolated regions and have no access to an electricity utility grid. The most people live in remote and rural areas, with low population density, lacking even the basic infrastructure. The utility grid extension to these locations is not a cost effective option and sometimes technically not feasible. The purpose of this thesis is the modelling and simulation of a stand-alone hybrid power system, referred to as “hydrogen Photovoltaic-Fuel Cell (PVFC) hybrid system”. It couples a photovoltaic generator (PV), an alkaline water electrolyser, a storage gas tank, a proton exchange membrane fuel cell (PEMFC), and power conditioning units (PCU) to give different system topologies. The system is intended to be an environmentally friendly solution since it tries maximising the use of a renewable energy source. Electricity is produced by a PV generator to meet the requirements of a user load. Whenever there is enough solar radiation, the user load can be powered totally by the PV electricity. During periods of low solar radiation, auxiliary electricity is required. An alkaline high pressure water electrolyser is powered by the excess energy from the PV generator to produce hydrogen and oxygen at a pressure of maximum 30bar. Gases are stored without compression for short- (hourly or daily) and long- (seasonal) term. A proton exchange membrane (PEM) fuel cell is used to keep the system’s reliability at the same level as for the conventional system while decreasing the environmental impact of the whole system. The PEM fuel cell consumes gases which are produced by an electrolyser to meet the user load demand when the PV generator energy is deficient, so that it works as an auxiliary generator. Power conditioning units are appropriate for the conversion and dispatch the energy between the components of the system. No batteries are used in this system since they represent the weakest when used in PV systems due to their need for sophisticated control and their short lifetime. The model library, ISET Alternative Power Library (ISET-APL), is designed by the Institute of Solar Energy supply Technology (ISET) and used for the simulation of the hybrid system. The physical, analytical and/or empirical equations of each component are programmed and implemented separately in this library for the simulation software program Simplorer by C++ language. The model parameters are derived from manufacturer’s performance data sheets or measurements obtained from literature. The identification and validation of the major hydrogen PVFC hybrid system component models are evaluated according to the measured data of the components, from the manufacturer’s data sheet or from actual system operation. Then, the overall system is simulated, at intervals of one hour each, by using solar radiation as the primary energy input and hydrogen as energy storage for one year operation. A comparison between different topologies, such as DC or AC coupled systems, is carried out on the basis of energy point of view at two locations with different geographical latitudes, in Kassel/Germany (Europe) and in Cairo/Egypt (North Africa). The main conclusion in this work is that the simulation method of the system study under different conditions could successfully be used to give good visualization and comparison between those topologies for the overall performance of the system. The operational performance of the system is not only depending on component efficiency but also on system design and consumption behaviour. The worst case of this system is the low efficiency of the storage subsystem made of the electrolyser, the gas storage tank, and the fuel cell as it is around 25-34% at Cairo and 29-37% at Kassel. Therefore, the research for this system should be concentrated in the subsystem components development especially the fuel cell.