Caracterização da farinha de banana verde

O presente trabalho objetivou a obtenção, a caracterização físico-química e o controle microbiológico durante o processamento da farinha de banana (Musa spp.) verde, cv. Prata, visando o seu aproveitamento na panificação, produtos dietéticos e alimentos infantis. Para obtenção da farinha, os frutos foram cortados, imersos em metabissulfito de sódio, desidratados e triturados, sendo em seguida, feitas as seguintes determinações: umidade; extrato etéreo; proteína bruta; fibra bruta; cinzas; fração glicídica; amido; valor calórico; pH; acidez total titulável; vitamina C; macrominerais (K, P, Ca, Mg, S e N); microminerais (B, Cu, Mn, Zn e Fe); coliformes a 45 °C; fungos filamentosos e leveduras; Bacillus cereus; Salmonella sp.; Staphylococcus aureus; e contagem de aeróbios mesófilos. Os resultados indicaram que a banana 'Prata' verde é viável para o processo de obtenção da farinha de banana, tendo em vista que é rica em amido, proteína, potássio, fósforo, magnésio, zinco, cobre e tem um alto valor calórico. O pH, a acidez total titulável e a vitamina C estão compatíveis com os valores encontrados em outras farinhas. Quanto ao uso de boas práticas no processamento, a farinha encontra-se dentro do padrão microbiológico ideal e, portanto, está apta para o consumo.

Influence of passion fruit albedo, citric acid, and the pulp/sugar ratio on the quality of banana preserves

The objective of this research was to evaluate the effect of the citric acid concentration, pulp/sugar ratio, and albedo concentration of the passion fruit peel on physical, physiochemical, and sensorial characteristics of the 'Silver' banana preserves. A 2³ factorial design and 3 repetitions in the central point were used. The albedo concentration between 0 and 3% had significant influence on the reduction of the reducing sugars and on the decrease in titratable acidity. The increase in the pulp/sugar ratio exerted a negative effect on the pH and positive on the titratable acidity; the acid addition reduced the non-reducing sugar level. The sensorial evaluation and purchase intention indicated that the incorporation of a maximum of 1.5% albedo in formulations containing 50% pulp and 0.5% citric acid resulted in products with good acceptability in comparison with the formulation in which 60% pulp and an absence of acid or albedo is utilized.

Stability of porridge pre-mixture made with Brazil nut flour and green banana flour with and without milk powder

The mixture of Brazil nut flour and green banana flour can improve the nutritional value of school meals, allowing for the use of regional ingredients derived from family agriculture. This study aimed to assess the stability of porridge pre-mixtures made with Brazil nut flour and green banana flour during six months of storage. Two types of pre-mixture were evaluated: with and without milk powder. These mixtures were packed in polyethylene/metallized polyester film, vacuum-sealed, and stored at room temperature. The products were evaluated for physicochemical composition, and every 30 days for moisture content, water activity, titratable acidity, pH, peroxide value and acidity of the lipid phase, total and thermotolerant coliforms, yeasts and molds, and sensory acceptance. There was no difference between the mixtures for the parameters evaluated. Moisture content, water activity, acidity of the lipid phase, and the yeast and mold count increased with storage time. The growth of yeasts and molds was more pronounced after 90 days of storage, when water activity reached the limit of 0.60. Although both products had good sensory acceptance throughout the period of study, it is recommended that the shelf life does not exceed 90 days.

Optimization of microwave drying conditions of two banana varieties using response surface methodology

AbstractOptimization of microwave drying conditions of Luvhele and Mabonde banana varieties were studied using response surface methodology. The drying was performed using a central composite rotatable design for two variables: microwave power level (100, 200 and 300 W) and drying time (40, 26, and 12 min.) for Luvhele; (100, 200 and 300 W) and (42, 27, and 12 min) for Mabonde. The colour and texture (hardness) data were analyzed using ANOVA and regression analysis. The fitness of the models obtained was good as the lack of fit for each of the models was not significant. The coefficient of determination R2 of the models was relatively high, hence the models obtained for the responses were adequate and acceptable. Drying conditions of 178.76 W, 12 min. drying time were found optimum for product quality at a desirability of 0.91 for Luvhele; while 127.67 W, 12 min. with a desirability of 0.86 was predicted for Mabonde. The result of this study could be used as a standard for microwave processing of Luvhele and Mabondebanana varieties.

Sarcolemmal lipid analysis from mechanically skinned rat muscle fibres.

Membrane lipid composition, which includes phospholipid (PL) headgroup, and fatty acid (FA) saturation, has been shown to affect cellular function. The sarcolemma (SL) membrane is integral to skeletal muscle function and health. Previous studies assessing SL lipid composition are limited as they have 1) restricted analysis to a PL level and neglected FA composition and 2) relied on aggressive membrane isolation procedures resulting in t-tubule and sarcoplasmic reticulum contamination and unknown levels of nuclear and mitochondrial contamination. Thus, to overcome these limitations, this study assessed a method of individually skinned skeletal muscle fibres as an alternative to analyze complete sarcolemmal membrane lipid composition. The major findings of this study were 1) complete SL lipid composition can be obtained 2) the SL had higher sphingomyelin content than previous studies and 3) the SL membrane had minimal nuclear and mitochondrial contamination and was void of contamination from sarcoplasmic reticulum and t-tubules.

Électrofilage de fibres à partir de mélanges polystyrène/poly(vinyl méthyl éther)

L’électrofilage est un procédé permettant de préparer des fibres possédant un diamètre de l’ordre du micromètre ou de quelques centaines de nanomètres. Son utilisation est toutefois limitée par le manque de contrôle sur la structure et les propriétés des fibres ainsi produites. Dans ce travail, des fibres électrofilées à partir de mélanges de polystyrène (PS) et de poly(vinyl méthyl éther) (PVME) ont été caractérisées. La calorimétrie différentielle à balayage (DSC) a montré que les fibres du mélange PS/PVME sont miscibles (une seule transition vitreuse) lorsque préparées dans le benzène, alors qu'une séparation de phases a lieu lorsque le chloroforme est utilisé. Les fibres immiscibles sont néanmoins malléables, contrairement à un film préparé par évaporation du chloroforme qui a des propriétés mécaniques médiocres. Des clichés en microscopies optique et électronique à balayage (MEB) ont permis d’étudier l'effet de la composition et du solvant sur le diamètre et la morphologie des fibres. Des mesures d’angles de contact ont permis d’évaluer l’hydrophobicité des fibres, qui diminue avec l’ajout de PVME (hydrophile); les valeurs sont de 60° supérieures à celles des films de composition équivalente. Un retrait sélectif du PVME a été réalisé par l’immersion des fibres dans l’eau. La spectroscopie infrarouge a montré que la composition passe de 70 à 95% de PS pour une fibre immiscible mais seulement à 75% pour une fibre miscible. Ces résultats indiquent que la phase riche en PVME se situe presque uniquement à la surface des fibres immiscibles, ce qui a été confirmé par microscopie à force atomique (AFM) et MEB. Finalement, l’effet du mélange des deux solvants, lors de l’électrofilage du mélange PS/PVME, a été étudié. La présence du chloroforme, même en quantité réduite, provoque une séparation de phases similaire à celle observée avec ce solvant pur.

Étude de la substance blanche par diffusion tensiorelle : tractographie des fibres d'association de la région temporo-pariéto-occipitale

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal.

Raman spectra of polymethyl methacrylate optical fibres excited by a 532 nm diode pumped solid state laser

Polymethyl methacrylate (PMMA) optical fibres are fabricated by a preform drawing process. The Raman spectra of PMMA fibres are recorded using a diode pumped solid state laser emitting at 532 nm and a CCD-spectrograph in the 400–3800 cm−1 range. The variation of the Raman intensity with the length of the optical fibre is studied. Investigations are carried out on the variation of FWHM of the Raman peak at 2957 cm−1 with the length of the optical fibre and pump power. The differential scattering cross section and gain coefficient of the Raman peak at 2957 cm−1 in PMMA are calculated in relation to that of toluene.

Raman spectra of polymethyl methacrylate optical fibres excited by a 532 nm diode pumped solid state laser

Polymethyl methacrylate (PMMA) optical fibres are fabricated by a preform drawing process. The Raman spectra of PMMA fibres are recorded using a diode pumped solid state laser emitting at 532 nm and a CCD-spectrograph in the 400–3800 cm−1 range. The variation of the Raman intensity with the length of the optical fibre is studied. Investigations are carried out on the variation of FWHM of the Raman peak at 2957 cm−1 with the length of the optical fibre and pump power. The differential scattering cross section and gain coefficient of the Raman peak at 2957 cm−1 in PMMA are calculated in relation to that of toluene

Fabrication and Characterisation of Dye Doped Polymer Optical Fibres With Different Refractive Index Profiles for Photonic Applications

International School of Photonics, Cohin University of Science and Technology

Microbial enzyme production utilizing banana wastes

A critical survey of the fruits and vegetable markets of the towns and cities in South India reveals that banana fruit stalk wastes share a dominant proportion among the solid wastes generated. In the light of the review of literature presented in the foregoing section, few reports are available on the utilisation of banana waste for the production of alcoholic beverages, biogas, and single cell protein. However, it is not yet tried for the production of industrial enzymes. Moreover, preliminary fermentation studies conducted under uncontrolled conditions revealed that banana fruit stalk could be aptly utilised as solid substrate? for the industrial production of microbial amylases and cellulases at a cheaper cost. Therefore, it was proposed to conduct a detailed study towards the development of a suitable fermentation process for the production of industrial enzymes using banana fruit stalk wastes, which is rich in carbohydrate, as solid substrate, employing bacteria, under SSF.

Studies on pulp propogation in single mode optical fibres

Studies on pulse propagation in single mode optical fibers have attracted interest from a wide area of science and technology as they have laid down the foundation for an in-depth understanding of the underlying physical principles, especially in the field of optical telecommunications. The foremost among them is discovery of the optical soliton which is considered to be one of the most significant events of the twentieth century owing to its fantastic ability to propagate undistorted over long distances and to remain unaflected after collision with each other. To exploit the important propertia of optical solitons, innovative mathematical models which take into account proper physical properties of the single mode optical fibers demand special attention. This thesis contains a theoretical analysis of the studies on soliton pulse propagation in single mode optical fibers.

Banana waste as substrate for a-amylase production by Bacillus subtilis (CBTK 106) under solid-state fermentation

Bacillus subtilis CBTK 106, isolated from banana wastes, produced high titres of a-amylase when banana fruit stalk was used as substrate in a solid-state fermentation system. The e¤ects of initial moisture content, particle size, cooking time and temperature, pH, incubation temperature, additional nutrients, inoculum size and incubation period on the production of a- amylase were characterised. A maximum yield of 5 345 000 U mg~1 min~1 was recorded when pretreated banana fruit stalk (autoclaved at 121 ¡C for 60 min) was used as substrate with 70% initial moisture content, 400 lm particle size, an initial pH of 7.0, a temperature of 35 ¡C, and additional nutrients (ammonium sulphate/sodium nitrate at 1.0%, beef extract/peptone at 0.5%, glucose/sucrose/starch/maltose at 0.1% and potassium chloride/sodium chloride at 1.0%) in the medium, with an inoculum-to-substrate ratio of 10% (v/w) for 24 h. The enzyme yield was 2.65-fold higher with banana fruit stalk medium compared to wheat bran