用于加速器控制的通用型TCP/IP-多串口协议转换器的研制

在加速器控制领域,经常涉及到要将带有标准RS-232串行接口的设备通过以太网连接来实现远程测控任务,本文所介绍的设计工作解决了8个串口设备通过一台基于CPLD和MSP430技术的通用型TCP/IP-多串口协议转换器来完成远程数据/命令的传送。

The Main Path to C, N, O Elements in Big Bang Nucleosynthesis

The production of C, N, O elements in a standard big bang nucleosynthesis scenario is investigated. Using the up-to-date data of nuclear reactions in BBN, in particular the Li-8 (n, gamma) Li-9 which has been measured in China Institute of Atomic Energy, a full nucleosynthesis network calculation of BBN is carried out. Our calculation results show that the abundance of C-12 is increased for an order of magnitude after addition of the reaction chain Li-8(n, gamma) Li-9(alpha, n) B-12(beta) C-12, which was neglected in previous studies. We find that this sequence provides the main channel to convert the light elements into C, N, O in standard BBN.

Molecular cloning, expression of a big defensin gene from bay scallop Argopecten irradians and the antimicrobial activity of its recombinant protein

Antimicrobial peptides are important components of the host innate immune responses by exerting broad-spectrum microbicidal activity against pathogenic microbes. The first mollusk big defensin (designated AiBD) cDNA was cloned from bay scallop Argopecten irradians by expressed sequence tag (EST) and rapid amplification of cDNA ends (RACE) techniques. The scallop AiBD consisted of 531 nucleotides with a canonical polyadenylation signal sequence AATAAA and a poly(A) tail, encoding a polypeptide of 122 amino acids. The high similarity of AiBD deduced amino acid sequence with big defensin from Tachypleus tridentatus and Branchiostoma belcheri tsingtaunese indicated that AiBD should be a member of big defensin family. The expression of AiBD in various tissues was measured by using Northern blotting analysis. mRNA transcripts of AiBD could be detected in haemocytes of unchallenged scallops. The temporal expression of AiBD in haemolymph after Vibrio anguilarum challenge was recorded by quantitative real time PCR. The relative expression level of AiBD in haemolymph was up-regulated evenly in the first 8 h, followed by a drastic increase, and increased 131.1-fold at 32 h post-injection. These results indicated that AiBD could be induced by bacterial challenge, and it should participate in the immune responses of A. irradians. Biological activity assay revealed that recombinant AiBD could inhibit the growth of both Gram-positive and Gram-negative bacteria, and also showed strong fungicidal activity towards the expression host. Recombinant expression of AiBD made it possible to further characterize its functions involved in immune responses, and also provided a potential therapeutic agent for disease control in aquaculture. (c) 2006 Elsevier Ltd. All rights reserved.

基于RFID的基带通信IP核的设计与仿真

分析基于射频识别(RFID)技术的系统基带通信过程,建立RFID基带传输模型,利用FPGA技术实现具有基带编解码、数据收发功能的通信IP核,介绍基于模块化思想的基带通信IP核的RTL设计方法,利用QuartusⅡ与Simulink工具进行系统仿真,仿真实验结果表明,该通信模块是有效的,能够为设计RFID通信系统提供高度集成的基带通信IP核。

FlexRay通信控制器IP的测试与验证

FlexRay是一种用于汽车的高速可确定性的，具备故障容错的总线系统，作下一代汽车网络协议，提供了充足的带宽、可靠性和实时响应能力，以实现线控应用，如节流阀、制动、转向和动态稳定性控制。该标准已经被越来越多的汽车制造商采用。目前国内尚未成功开发出相关产品，因此研究开发具有自主知识产权的IP具有十分重要的意义。 随着芯片复杂度的快速增长，验证成为SoC开发过程中面临的最有挑战性的一个环节。验证要占整个设计开发60%-80%的工作量。对于千万门级的SoC，充分、全面的验证尤为复杂，需要耗费大量的人力以及时间。为了缩短项目开发时间，加快产品面市步伐，要采用先进高效的验证方法，提高验证效率，同时保障验证的覆盖率。 本文所用到的FlexRay通信控制器IP核是由中科院沈阳自动化所SOC项目组自主设计的，本文对其进行了详细的功能验证。首先介绍了集成电路设计中的验证方法学，接着介绍了验证语言SystemVerilog，以及基于SystemVerilog语言的一种新的高效验证方法学VMM。在对FlexRay通信控制器IP核的结构及功能进行分析后采用VMM建立一个基于事务的、带约束的随机化验证平台对IP核进行了全面的功能验证。通过设计足够的case来保证模块的功能覆盖率。通过引用这种高效的验证方法学，发现了设计中存在的一些bug，对后续的改进与完善具有一定的指导意义。

基于IP QoS技术的网络机器人遥操作研究

针对基于 Internet机器人遥操作中存在的问题 ,结合 Internet网络技术的最新发展 ,借助 IP Qo S技术的特点和优势 ,本文研究并设计了基于集成业务体系结构的网络机器人遥操作系统 .通过分析 IP Qo S技术和机器人遥操作技术相互结合的可行性与合理性 ,表明该系统能够克服目前在 Internet遥操作过程中存在的问题并可在未来支持 IP Qo S技术的 Internet中发挥作用 .本文提出了该系统的设计原型及实现方法 .

Explanation of Big "P" as of March 20, 1959

ERROR is a routine to provide a common location for all routines. Its celling sequence is: SXD SERROR,4 TSX SERROR+1,4 The above is normally followed immediately by up to 20 registers of BCD remarks terminated by a word of 1's. This may be left out, however. ERROR prints out the remark, if any, the location of the TSX that entered error, restores the console except for the AC overflow, and transfers to the user's error routine specified by the calling sequence of SETUP.

Gender and health: a social movement’s agenda for Big Pharma.

Social movements have an important new campaigning and organizing competence in new information communication technologies. These technologies also enable the members of social movements to readily research the accuracy of information: knowledge becomes globalized and readily accessible. In relation to Big Pharma, women’s social movements and social movements of the medicated intersect, and there is now a substantial challenge to Big Pharma both within developed and developing countries from the terrain of gender and health. This paper documents those challenges and looks towards their consequences in the future both in respect of Big Pharma but also in terms of 'academic' research

Who is the fairest of them all? Gendered Readings of Big Brother UK

Chandler, D. and Griffiths, M. (2004). Who is the fairest of them all?: Gendered Readings of Big Brother UK. In E. Mathijis and J. Jones (Eds.), Big Brother International: Format, Critics and Publics (pp.40-61). London: Wallflower Press. RAE2008

On the Scalability-Performance Tradeoffs in MPLS and IP Routing

MPLS (Multi-Protocol Label Switching) has recently emerged to facilitate the engineering of network traffic. This can be achieved by directing packet flows over paths that satisfy multiple requirements. MPLS has been regarded as an enhancement to traditional IP routing, which has the following problems: (1) all packets with the same IP destination address have to follow the same path through the network; and (2) paths have often been computed based on static and single link metrics. These problems may cause traffic concentration, and thus degradation in quality of service. In this paper, we investigate by simulations a range of routing solutions and examine the tradeoff between scalability and performance. At one extreme, IP packet routing using dynamic link metrics provides a stateless solution but may lead to routing oscillations. At the other extreme, we consider a recently proposed Profile-based Routing (PBR), which uses knowledge of potential ingress-egress pairs as well as the traffic profile among them. Minimum Interference Routing (MIRA) is another recently proposed MPLS-based scheme, which only exploits knowledge of potential ingress-egress pairs but not their traffic profile. MIRA and the more conventional widest-shortest path (WSP) routing represent alternative MPLS-based approaches on the spectrum of routing solutions. We compare these solutions in terms of utility, bandwidth acceptance ratio as well as their scalability (routing state and computational overhead) and load balancing capability. While the simplest of the per-flow algorithms we consider, the performance of WSP is close to dynamic per-packet routing, without the potential instabilities of dynamic routing.

Sampling Biases in IP Topology Measurements

Considerable attention has been focused on the properties of graphs derived from Internet measurements. Router-level topologies collected via traceroute studies have led some authors to conclude that the router graph of the Internet is a scale-free graph, or more generally a power-law random graph. In such a graph, the degree distribution of nodes follows a distribution with a power-law tail. In this paper we argue that the evidence to date for this conclusion is at best insufficient. We show that graphs appearing to have power-law degree distributions can arise surprisingly easily, when sampling graphs whose true degree distribution is not at all like a power-law. For example, given a classical Erdös-Rényi sparse, random graph, the subgraph formed by a collection of shortest paths from a small set of random sources to a larger set of random destinations can easily appear to show a degree distribution remarkably like a power-law. We explore the reasons for how this effect arises, and show that in such a setting, edges are sampled in a highly biased manner. This insight allows us to distinguish measurements taken from the Erdös-Rényi graphs from those taken from power-law random graphs. When we apply this distinction to a number of well-known datasets, we find that the evidence for sampling bias in these datasets is strong.

Efficient building management with IP-based wireless sensor network

Existing Building/Energy Management Systems (BMS/EMS) fail to convey holistic performance to the building manager. A 20% reduction in energy consumption can be achieved by efficiently operated buildings compared with current practice. However, in the majority of buildings, occupant comfort and energy consumption analysis is primarily restricted by available sensor and meter data. Installation of a continuous monitoring process can significantly improve the building systems’ performance. We present WSN-BMDS, an IP-based wireless sensor network building monitoring and diagnostic system. The main focus of WSN-BMDS is to obtain much higher degree of information about the building operation then current BMSs are able to provide. Our system integrates a heterogeneous set of wireless sensor nodes with IEEE 802.11 backbone routers and the Global Sensor Network (GSN) web server. Sensing data is stored in a database at the back office via UDP protocol and can be access over the Internet using GSN. Through this demonstration, we show that WSN-BMDS provides accurate measurements of air-temperature, air-humidity, light, and energy consumption for particular rooms in our target building. Our interactive graphical user interface provides a user-friendly environment showing live network topology, monitor network statistics, and run-time management actions on the network. We also demonstrate actuation by changing the artificial light level in one of the rooms.

Beyond simple imaging with energetic beams – nanopatterning, correlative microscopy and statistical analysis of inclusions

Electron microscopy (EM) has advanced in an exponential way since the first transmission electron microscope (TEM) was built in the 1930’s. The urge to ‘see’ things is an essential part of human nature (talk of ‘seeing is believing’) and apart from scanning tunnel microscopes which give information about the surface, EM is the only imaging technology capable of really visualising atomic structures in depth down to single atoms. With the development of nanotechnology the demand to image and analyse small things has become even greater and electron microscopes have found their way from highly delicate and sophisticated research grade instruments to key-turn and even bench-top instruments for everyday use in every materials research lab on the planet. The semiconductor industry is as dependent on the use of EM as life sciences and pharmaceutical industry. With this generalisation of use for imaging, the need to deploy advanced uses of EM has become more and more apparent. The combination of several coinciding beams (electron, ion and even light) to create DualBeam or TripleBeam instruments for instance enhances the usefulness from pure imaging to manipulating on the nanoscale. And when it comes to the analytic power of EM with the many ways the highly energetic electrons and ions interact with the matter in the specimen there is a plethora of niches which evolved during the last two decades, specialising in every kind of analysis that can be thought of and combined with EM. In the course of this study the emphasis was placed on the application of these advanced analytical EM techniques in the context of multiscale and multimodal microscopy – multiscale meaning across length scales from micrometres or larger to nanometres, multimodal meaning numerous techniques applied to the same sample volume in a correlative manner. In order to demonstrate the breadth and potential of the multiscale and multimodal concept an integration of it was attempted in two areas: I) Biocompatible materials using polycrystalline stainless steel and II) Semiconductors using thin multiferroic films. I) The motivation to use stainless steel (316L medical grade) comes from the potential modulation of endothelial cell growth which can have a big impact on the improvement of cardio-vascular stents – which are mainly made of 316L – through nano-texturing of the stent surface by focused ion beam (FIB) lithography. Patterning with FIB has never been reported before in connection with stents and cell growth and in order to gain a better understanding of the beam-substrate interaction during patterning a correlative microscopy approach was used to illuminate the patterning process from many possible angles. Electron backscattering diffraction (EBSD) was used to analyse the crystallographic structure, FIB was used for the patterning and simultaneously visualising the crystal structure as part of the monitoring process, scanning electron microscopy (SEM) and atomic force microscopy (AFM) were employed to analyse the topography and the final step being 3D visualisation through serial FIB/SEM sectioning. II) The motivation for the use of thin multiferroic films stems from the ever-growing demand for increased data storage at lesser and lesser energy consumption. The Aurivillius phase material used in this study has a high potential in this area. Yet it is necessary to show clearly that the film is really multiferroic and no second phase inclusions are present even at very low concentrations – ~0.1vol% could already be problematic. Thus, in this study a technique was developed to analyse ultra-low density inclusions in thin multiferroic films down to concentrations of 0.01%. The goal achieved was a complete structural and compositional analysis of the films which required identification of second phase inclusions (through elemental analysis EDX(Energy Dispersive X-ray)), localise them (employing 72 hour EDX mapping in the SEM), isolate them for the TEM (using FIB) and give an upper confidence limit of 99.5% to the influence of the inclusions on the magnetic behaviour of the main phase (statistical analysis).

Adjuvant chemotherapy in elderly patients with breast cancer: a survey of the Breast International Group (BIG).

BACKGROUND: To collect oncologists' experience and opinion on adjuvant chemotherapy in elderly breast cancer patients. MATERIALS AND METHODS: A questionnaire was circulated among the members of the Breast International Group. RESULTS: A total of 277 oncologists from 28 countries participated in the survey. Seventy years is the age cut-off commonly used to define a patient as elderly. Biological age and the biological characteristics of the tumor are the most frequently used criteria to propose adjuvant chemotherapy to an elderly patient. Combination therapy with cyclophosphamide, methotrexate and fluorouracil on days 1 and 8 is the most frequently prescribed regimen. Great interest exists in oral chemotherapy. CONCLUSION: There is interest among those who responded to the survey to validate a comprehensive geriatric assessment for use as a predictive instrument of toxicity and/or activity of anticancer therapy and to evaluate the role of a treatment option that is potentially less toxic and possibly as effective as polychemotherapy.

Bone fractures among postmenopausal patients with endocrine-responsive early breast cancer treated with 5 years of letrozole or tamoxifen in the BIG 1-98 trial.

To compare the incidence and timing of bone fractures in postmenopausal women treated with 5 years of adjuvant tamoxifen or letrozole for endocrine-responsive early breast cancer in the Breast International Group (BIG) 1-98 trial.