931 resultados para Automobiles - Design and construction - Safety measures
Resumo:
Mode of access: Internet.
Resumo:
Previously published under title: The half-timber house... New York, McBride, Nast & company, 1912.
Resumo:
Bibliography: p. 85-88.
Resumo:
Mode of access: Internet.
Resumo:
Mode of access: Internet.
Resumo:
Thesis (Master's)--University of Washington, 2016-06
Resumo:
The objective of this work was to design, construct and commission a new ablative pyrolysis reactor and a high efficiency product collection system. The reactor was to have a nominal throughput of 10 kg/11r of dry biomass and be inherently scalable up to an industrial scale application of 10 tones/hr. The whole process consists of a bladed ablative pyrolysis reactor, two high efficiency cyclones for char removal and a disk and doughnut quench column combined with a wet walled electrostatic precipitator, which is directly mounted on top, for liquids collection. In order to aid design and scale-up calculations, detailed mathematical modelling was undertaken of the reaction system enabling sizes, efficiencies and operating conditions to be determined. Specifically, a modular approach was taken due to the iterative nature of some of the design methodologies, with the output from one module being the input to the next. Separate modules were developed for the determination of the biomass ablation rate, specification of the reactor capacity, cyclone design, quench column design and electrostatic precipitator design. These models enabled a rigorous design protocol to be developed capable of specifying the required reactor and product collection system size for specified biomass throughputs, operating conditions and collection efficiencies. The reactor proved capable of generating an ablation rate of 0.63 mm/s for pine wood at a temperature of 525 'DC with a relative velocity between the heated surface and reacting biomass particle of 12.1 m/s. The reactor achieved a maximum throughput of 2.3 kg/hr, which was the maximum the biomass feeder could supply. The reactor is capable of being operated at a far higher throughput but this would require a new feeder and drive motor to be purchased. Modelling showed that the reactor is capable of achieving a reactor throughput of approximately 30 kg/hr. This is an area that should be considered for the future as the reactor is currently operating well below its theoretical maximum. Calculations show that the current product collection system could operate efficiently up to a maximum feed rate of 10 kg/Fir, provided the inert gas supply was adjusted accordingly to keep the vapour residence time in the electrostatic precipitator above one second. Operation above 10 kg/hr would require some modifications to the product collection system. Eight experimental runs were documented and considered successful, more were attempted but due to equipment failure had to be abandoned. This does not detract from the fact that the reactor and product collection system design was extremely efficient. The maximum total liquid yield was 64.9 % liquid yields on a dry wood fed basis. It is considered that the liquid yield would have been higher had there been sufficient development time to overcome certain operational difficulties and if longer operating runs had been attempted to offset product losses occurring due to the difficulties in collecting all available product from a large scale collection unit. The liquids collection system was highly efficient and modeling determined a liquid collection efficiency of above 99% on a mass basis. This was validated due to the fact that a dry ice/acetone condenser and a cotton wool filter downstream of the collection unit enabled mass measurements of the amount of condensable product exiting the product collection unit. This showed that the collection efficiency was in excess of 99% on a mass basis.
Resumo:
This paper considers the use of general performance measures in evaluating specific planning and design decisions in higher education and reflects on the students' learning process. Specifically, it concerns the use of the MENTOR multimedia computer aided learning package for helping students learn about OR as part of a general business degree. It includes the transfer of responsibility for a learning module to a new staff member and a change from a single tutor to a system involving multiple tutors. Student satisfaction measures, learning outcome measures and MENTOR usage patterns are examined in monitoring the effects of the changes in course delivery. The results raise some questions about the effectiveness of general performance measures in supporting specific decisions relating to course design and planning.
Resumo:
Dedicated short-range communications (DSRC) are a promising vehicle communication technique for collaborative road safety applications (CSA). However, road safety applications require highly reliable and timely wireless communications, which present big challenges to DSRC based vehicle networks on effective and robust quality of services (QoS) provisioning due to the random channel access method applied in the DSRC technique. In this paper we examine the QoS control problem for CSA in the DSRC based vehicle networks and presented an overview of the research work towards the QoS control problem. After an analysis of the system application requirements and the DSRC vehicle network features, we propose a framework for cooperative and adaptive QoS control, which is believed to be a key for the success of DSRC on supporting effective collaborative road safety applications. A core design in the proposed QoS control framework is that network feedback and cross-layer design are employed to collaboratively achieve targeted QoS. A design example of cooperative and adaptive rate control scheme is implemented and evaluated, with objective of illustrating the key ideas in the framework. Simulation results demonstrate the effectiveness of proposed rate control schemes in providing highly available and reliable channel for emergency safety messages. © 2013 Wenyang Guan et al.
Resumo:
Purpose – The UK experienced a number of Extreme Weather Events (EWEs) during recent years and a significant number of businesses were affected as a result. With the intensity and frequency of weather extremes predicted in the future, enhancing the resilience of businesses, especially of Small and Medium-sized Enterprises (SMEs), who are considered as highly vulnerable, has become a necessity. However, little research has been undertaken on how construction SMEs respond to the risk of EWEs. In seeking to help address this dearth of research, this investigation sought to identify how construction SMEs were being affected by EWEs and the coping strategies being used. Design/methodology/approach – A mixed methods research design was adopted to elicit information from construction SMEs, involving a questionnaire survey and case study approach. Findings – Results indicate a lack of coping strategies among the construction SMEs studied. Where the coping strategies have been implemented, these were found to be extensions of their existing risk management strategies rather than radical measures specifically addressing EWEs. Research limitations/implications – The exploratory survey focused on the Greater London area and was limited to a relatively small sample size. This limitation is overcome by conducting detailed case studies utilising two SMEs whose projects were located in EWE prone localities. The mixed method research design adopted benefits the research by presenting more robust findings. Practical implications – A better way of integrating the potential of EWEs into the initial project planning stage is required by the SMEs. This could possibly be achieved through a better risk assessment model supported by better EWE prediction data. Originality/value – The paper provides an original contribution towards the overarching agenda of resilience of SMEs and policy making in the area of EWE risk management. It informs both policy makers and practitioners on issues of planning and preparedness against EWEs.
Resumo:
This Handbook has been prepared by the Iowa DOT as a guide and supplement to the MUTCD. It provides in one document a large number of illustrations which can be easily adapted to specific conditions by field personnel. It is intended to supersede all previous non-conforming standards now being used throughout the state and to provide uniform guidelines for all agencies, public and private, who must conduct construction and maintenance activities on the streets and highways of the state. The illustrations contained herein serve as a quick reference for field personnel to follow, however, no amount of detailed instructions can adequately cover every situation. For this reason, sound judgment is required in using these illustrations to cover actual field conditions.
Resumo:
The investigations for this report were initiated in October, 1967, to perform the following: l. Review the current Iowa State Highway Commission roadway geometric design standards and criteria for conformance with national policies and recent research findings with special attention to high way safety. 2. Review the current Iowa State Highway Commission roadway lighting design standards and criteria for conformance with national policies and recent research findings with special attention to high way safety
Resumo:
Background: The transport of children in ground ambulances is a rarely studied topic worldwide. The ambulance vehicle is a unique and complex environment with particular challenges for the safe, correct and effective transportation of patients. Unlike the well developed and readily available guidelines on the safe transportation of a child in motor vehicles, there is a lack on consistent specifications for transporting children in ambulances. Nurses are called daily to transfer children to hospitals or other care centers, so safe transport practices should be a major concern. Purpose: to know which are the safety precautions and specific measures used in the transport of children in ground ambulances by nurses and firefighters and to identify what knowledge these professionals had about safe modes of children transportation in ground ambulances. Methods: In this context, an exploratory - descriptive study and quantitative analysis was conducted. A questionnaire was completed by 135 nurses and firefighters / ambulance crew based on 4 possible children transport scenarios proposed by the NHTSA (National Highway Traffic Safety Administration) and covered 5 different children´s age groups (new born children, 1 to 12 months; 1 to 3 years old; 4 to 7 years old and 8 to 12 years old). Results: The main results showed a variety of safety measures used by the professionals and a significant difference between their actual mode of transportation and the mode they consider to be the ideal considering security goals. In addition, findings showed that achieved scores related to what ambulance crews do in the considered scenarios reflect mostly satisfactory levels of transportation rather than optimum levels of safety, according to NHTSA recommendations. Variables as gender, educational qualifications, occupational group and local where professionals work seem to influence the transport options. Female professionals and nurses from pediatric units appear to do a safer transportation of children in ground ambulances than other professionals. Conclusion: Several professionals refereed unawareness of the safest transportation options for children in ambulances and did not to know the existence of specific recommendations for this type of transportation. The dispersion of the results suggests the need for investment in professional training and further regulation for this type of transportation.
Resumo:
Background: The transport of children in ground ambulances is a rarely studied topic worldwide. The ambulance vehicle is a unique and complex environment with particular challenges for the safe, correct and effective transportation of patients. Unlike the well developed and readily available guidelines on the safe transportation of a child in motor vehicles, there is a lack on consistent specifications for transporting children in ambulances. Nurses are called daily to transfer children to hospitals or other care centers, so safe transport practices should be a major concern. Purpose: to know which are the safety precautions and specific measures used in the transport of children in ground ambulances by nurses and firefighters and to identify what knowledge these professionals had about safe modes of children transportation in ground ambulances. Methods: In this context, an exploratory - descriptive study and quantitative analysis was conducted. A questionnaire was completed by 135 nurses and firefighters / ambulance crew based on 4 possible children transport scenarios proposed by the NHTSA (National Highway Traffic Safety Administration) and covered 5 different children´s age groups (new born children, 1 to 12 months; 1 to 3 years old; 4 to 7 years old and 8 to 12 years old). Results: The main results showed a variety of safety measures used by the professionals and a significant difference between their actual mode of transportation and the mode they consider to be the ideal considering security goals. In addition, findings showed that achieved scores related to what ambulance crews do in the considered scenarios reflect mostly satisfactory levels of transportation rather than optimum levels of safety, according to NHTSA recommendations. Variables as gender, educational qualifications, occupational group and local where professionals work seem to influence the transport options. Female professionals and nurses from pediatric units appear to do a safer transportation of children in ground ambulances than other professionals. Conclusion: Several professionals refereed unawareness of the safest transportation options for children in ambulances and did not to know the existence of specific recommendations for this type of transportation. The dispersion of the results suggests the need for investment in professional training and further regulation for this type of transportation.
Resumo:
Summary The transport of children in ground ambulances is a rarely studied topic worldwide. The ambulance vehicle is a unique environment with particular challenges for the safe, correct and effective transportation of patients. Unlike the well developed and available guidelines on the transportation of children in motor vehicles, there is a lack on specifications for transporting children in ambulances. Nurses are called daily to transfer children to hospitals or other care centres, so safe transport practices should be a major concern. Methods An exploratory - descriptive study and quantitative analysis was conducted. The safety measures used by the professionals in the transportation of children in ambulances were analysed based on the NHTSA (National Highway Traffic Safety Administration) recommendations. A questionnaire was applied to 135 nurses and firefighters/crew of Portuguese ambulances using 4 possible transport situations and covering 5 paediatric age groups. Results There are a variety of safety measures used by professionals and a significant difference between actual mode of transportation and the mode they consider to be the ideal. In addition, findings showed that scores related to what ambulance crews do in these scenarios reflect most satisfactory levels of transportation rather than the optimum levels, according to NHTSA recommendations. Variables as gender, educational qualifications, occupational group and local where professionals work seem to influence the transport options. Female professionals and pediatric nurses do a safer transportation of children in ambulances than other professionals. Conclusion The results suggest the need for investment in professional training and further regulation for this type of transportation.