Massa de forragem, composição química do capim-massai e comportamento ingestivo de ovinos durante a fase de implantação do eucalipto em sistema silvipastoril

Pós-graduação em Zootecnia - FCAV

Produção de forragem de Tifton 85 adubado com nitrogênio e submetido à lotação contínua

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determinação da melhor dose de virginiamicina em suplementos para bovinos Nelore em pastejo

Pós-graduação em Zootecnia - FCAV

Características morfogenéticas, perdas de nitrogênio por volatilização, reservas orgânicas e sistema radicular do capim-Tanzânia fertilizado com doses de nitrogênio

O objetivo do trabalho foi estudar as características morfogenéticas e estruturais do capim-Tanzânia, a produção de forragem, as perdas de nitrogênio (N) por volatilização, reservas orgânicas e a avaliação do sistema radicular sob doses de nitrogênio sob pastejo. O experimento foi instalado na área Fazenda Experimental de Iguatemi da Universidade Estadual de Maringá, no período de março de 2007 a março de 2008. O delineamento experimental utilizado foi de blocos completos ao acaso, com parcelas subdivididas com quatro repetições. Nas parcelas, encontravam-se as doses de N (0, 150, 300 e 450 kg ha-1 de N) e, nas sub-parcelas, as estações do ano. As perdas de N por volatilização foram quantificadas depois da adubação N (1, 2, 3, 6, 9, 12 e 15 dias). As amostragens das raízes foram realizadas nas profundidades de 0-10, 10-20 e 20-40 cm. A aplicação do fertilizante N na pastagem foi parcelada em três aplicações. A produção de massa seca total e de lâmina foliar de forragem respondeu linearmente até 282 kg ha-1 de N na estação do verão. A adubação nitrogenada exerce efeito positivo nas taxas de alongamento e aparecimento foliar, e no número de folhas vivas em plantas de capim-Tanzânia nas estações da primavera e verão. Elevadas adubações nitrogenadas associada a intervalos menores de pastejo promovem uma maior porcentagem de lâmina foliar; no manejo de pastos de capim-Tanzânia sob lotação rotacionada com altura de 70 cm na entrada dos animais para o pastejo e saída com 30 cm de altura do resíduo. A interação entre o nível de adubação e o período depois da aplicação de uréia foi significativa para a variável volatilização acumulada de N-NH3. A aplicação da uréia acarreta perdas percentuais mais elevadas de N nos três primeiros dias após a aplicação. A perda média acumulada de N-NH3 no período para as três estações do ano... (Resumo completo, clicar acesso eletrônico abaixo)

Comportamento ingestivo de bovinos mantidos em pastos de Brachiaria brizantha cv. Xaraés manejado em diferentes alturas de pastejo

This experiment was conducted to evaluate the effect of grazing heights on daytime behavioral activities of Nellore beef cattle in the rainy season. The experimental area was 12 hectares divided into paddocks of one hectare each. The treatments consisted of four defoliation heights (15, 30, 45 and 60 cm) in pastures of Brachiaria brizantha cv. Xaraes with three replicates each. It was used the continuos grazing method, with variable stocking rate. Forage samples collected on the plots were sent to the laboratory for separation of the botanical components, weighing and determination of dry matter, with the material collected by simulated grazing. The variables: grazing time, idle time and ruminating time were evaluated for 12 consecutive hours on days 15 and 16 February 2011, considering the morning and afternoon periods. It was used a completely randomized design. The height of the canopy significantly influenced the daily grazing time and ruminating time, with a quadratic response as a function of time of defoliation. The bite rate decreased as a function of heights studied. However the chemical composition of the material collected by simulated grazing did not differ between treatments. Xaraes grass swards grazed at around 45 cm height provide greater ease of apprehension by grazing cattle.

Desempenho de bovinos de corte em pastos de Brachiaria brizantha cv. Xaraés manejados em diferentes alturas de pastejo

The production of grazing cattle has been very interesting, due to the low cost to produce fodder, compared to other sources of forage used to feed these animals, but the adequate management pasture has high influence on the success and profitability of cattle production systems. Thus, the objective of this study was to determine the optimum grazing height of Brachiaria brizantha cv. Xaraes, which provides the highest individual weight gain and gain per area. The stocking rate was continuous, with variable stocking rate. The experimental period was from January to December 2010. Three Nellore males were used in each experimental plot, and, when needed, additional animals were used for adjusting the desired heights. Monthly sampling was obtained to estimate forage mass (kg.ha(-1) of DM) and the structural characteristics of the pastures, such as, leaf: stem ratio. The animals were weighed at the beginning of the experiment and every 28 days, after 12 hours of fasting, to measure the average daily gain (ADG) After weighings were performed adjustments stocking rate to desired heights. Throughout the experimental period the animals received mineral supplementation. The desired sward heights were 15, 30, 45 and 60 cm, with three replicates each. The experimental design was completely randomized with four treatments and three replications. To body weight gain (BWG) and average daily gain (ADG), each animal was considered an experimental unit. To gain per area and stocking rate, the paddock was considered the experimental unit. The leaf: stem ratio showed a linear increasing behavior in the spring and summer seasons. The smaller grazing heights provided higher gain per unit area (812.15 kg ha(-1)), while the highest grazing heights promoted high individual weight gain (0.790 kg.dia(-1)). The results suggest that Xaraes grass pastures should be grazed between 30 and 45 cm to allow reasonable performances by area and individual performances.

Produção de forragem e composição estrutural de pastos de Brachiaria brizantha cv. Xaraés manejados em diferentes alturas de pastejo

The objective of this study was to analyze the production of dry mass, forage accumulation rate and the structural composition of Brachiaria brizantha cv. Xaraes pastures, managed under different grazing heights in continuous stocking. The experimental area was 12 hectares, divided in paddocks of one hectare each. The treatments were 15, 30, 45 and 60 cm of defoliation heights. Nellore steers were used to reach the desired heights. Every 28 days four cut samples and eight visual samples were collected for comparative performance in the experimental plots. Two grazing exclusion cages were used per treatment to estimate accumulation rates kg.ha(-1) DM. The cut material was taken to the laboratory for separation of the botanical components (green leaf, stem and senescent material), weighing and determination of dry matter. The experimental design was the completely randomized with three replicates. There were treatments effects at all seasons for the production of total mass, except in the spring. In summer and spring seasons it was observed the highest values for leaf blades (1.100 kg DM.ha(-1)). In the winter, the highest values of senescent material was observed, as expected. The average accumulation showed no significant difference among the treatments, except for stem and total mass in the summer and stem in the fall. The tillers were heavier and higher values for number of green leaves per tiller occurred in the fall, but for senescent leaves per tiller ocurred in the winter. Swards grazed at heights between 45 and 60 cm of defoliation, had good production of forage mass and leaf constituent.

Características produtivas e morfológicas do capim Tanzânia em diferentes intensidades de pastejo

The objective of this study was to determine the best height of the Tanzania grass under grazing, assessing morphological and productive characteristics of the sward. This experiment was conducted in Cidade Gaucha, Parana, where he was rated the accumulation rate and morphological characteristics of Tanzania grass pastures grazed at 20, 40, 60 and 80 cm grazing under continuous stocking with variable stocking rate for beef cattle. The experimental area was 12 hectare divided in paddocks of one hectare each. For each paddock were allocated two grazing exclusion cage for estimating herbage accumulation, and eight samples were taken every 28 days throughout the year 2010. The completely randomized design. The herbage mass of the morphological structures showed a linear positive function of sward heights. The height of defoliation did not influence the rate of herbage accumulation for any of the morphological structures: green leaf, stem + sheaths and senescent material. There were also no differences in leaf: stem ratio. All heights within the range studied provided adequate number of green leaves per tiller. Tanzania grass pastures grazed under continuous stocking between 40 and 60 cm, for providing a good association between accumulation and mass of green leaf blades, and acceptable values of the mass of stem + sheaths and senescent material. Pasture of Tanzania grass under 60 and 80 cm allow of leaves satisfactory accumulation in the autumn.

Comportamento ingestivo de novilhas Nelore em pastejo recebendo suplemento a base de própolis ou monensina sódica

We evaluated the effect of additives the basis of propolis and monensin on ingestive behavior (grazing -GRA, rumination lying -RLY, rumination in foot -RFO, rumination -RUM; idleness lying -ILY, idleness in standing -IDS, idleness -IDL, walking -WAL, posture standing -POS, posture lying -PLY, intake of supplement and water -ISW) of heifers in Tifton 85 grazing. The treatments were: no additive (NAD); propolis - PRO (33.24 mg animal-1 of total flavonoid in apigenin), and monensin -MON (100 mg animal(-1)). Were used five heifers treatment(-1) for evaluation of ingestive behavior during 12 hours of total valuation, which was divided into three periods. Used a factorial design into 3 x 3 for evaluation of ingestive behavior as a function of the evaluation periods. Were utilized three paddocks of 2.9 acres of grass Tifton 85. The additives and mineral supplement (50 g animal(-1)) were provided with 200 g of corn meal to 17 hours. For all activities of the ingestive behaviors observed the effect of period on the time spent on of different activities. The activities of GRA and ISW were higher in the third period (15hours to 19hours) compared to the first period (7hours at 11hours). For IDL and PLY, there was a higher time in minutes for heifers treatment with PRO in the period of 7hours at 11hours, compared to other treatments (NAD and MON). Thus, it is concluded that the use of the additive based on propolis enables sodium monensin replacement, to heifers maintained on pasture without changing eating behavior as well as providing greater idleness during the day the without affecting animal performance.

Proposta de um dispositivo para ajuste automático da altura de uma cama hospitalar

This paper proposes a mechanical device to adapt a simple model of hospital bed used in the Emergency Department at Santa Casa of Guaratinguetá, allowing the bed’s height adjustment with electromechanical drive. This adaptation aims to introduce improvements in the routine work of nurses and reduce ergonomic problems stemming from repetitive strain during the transfer of patients to stretchers and wheelchairs, as well as providing more comfort to the bedridden patient. The device is mainly composed of: an electric induction motor used to drive the engine, a steel spindle with square thread, which allows axial displacement of the bed, a transmission system with pulleys and belt, which transmits power supplied by the motor to the spindle. The mechanism allows the height of the bed is regulated between 400 and 800 mm. The estimated implementation cost of this proposal is lower than the acquisition cost of a commercial hospital bed with the same features, which confirms the feasibility of the proposed solution

Proposta de um dispositivo para adaptação em uma cama hospitalar para ajuste de altura

In hospitals, health professionals may face different situations and problems. By following them, it is remarkable that one of the difficulties is related to the support provided by the facilities to carry out their work. This also affects the quality of treatment offered to patients. One of the points of improvement that could be studied is hospital beds. The Fawler's simplest hospital bed type, used in most Brazilian public hospitals, is designed with an ergonomic average height that offers a default position for analysis and treatment of patients. There is no possibility of adjusting the height of those beds, and hence there is a limitation in this regard since that height is fixed, but the physical structures of the workers and patients may vary widely and there may be a conflict when there are people too large or small involved in this process. Beyond that, studies by experts show that beds with height adjustment decreases the muscular effort and improve the movement quality of the spine of nursing staff, reducing the force on certain vertebrae and also the ergonomic risk. Of course, patient comfort is also affected accordingly. As the beds made with height adjustment are very expensive, this study aims to design a device to adapt the not adjustable beds. The project must be viable from an economic and mechanic standpoint, being able to adapt both old and new simplest Fawler hospital bed models, since their dimensions are similar. The final result shows that it is possible to adapt such beds using the designed concept at a viable cost. Furthermore, this concept could be applied in other bed types or objects that have hollow feet

Marandu grass management and supplementation on performance and methane mitigation of Nellore bulls

Pós-graduação em Zootecnia - FCAV

Métodos de estimativa de peso e altura na avaliação de desnutrição de pacientes com câncer

To calculate the estimated and actual height and weight measures in cancer patients, evaluate the correlation and concordance of these measures and to identify the malnutrition patients. 62 cancer patients, treated at the Amaral Carvalho Hospital (Jaú- SP). For classifi cation of nutritional status, the Patient-Generated Subjective Global Assessment, the Body Mass Index and the relationship with usual weight were used. For the estimated weight was used the algorithm Chumlea et al.7 and estimated height, the equation proposed by Chumlea et al.8 and Kwok & Whitelaw24. The Pearson Correlation Coeffi cient and the Intraclass Correlation Coeffi cient was calculated and simple linear regression was conducted. To compare the malnutrition detected by different methods, the Cochran’s Q test were performed. There was a strong and signifi cant correlation between the estimated and actual weight (r=0,95; CI95%=0,92-0,97; p<0,001) and excellent concordance (ρ=0,95). For height measurements, a signifi cant correlation was observed between the actual and estimated measurement the method Chumlea et al.8 (r=0,78; CI95%=0,66-0,86; p<0,001) and Kwok & Whitelaw24 (r=0,85; CI95%: 0,75-0,90; p<0,001). Concordance was “Good” (ρ=0,72) and “Moderate” (ρ=0,67) between the actual height and estimated by Chumlea et al.8 and Kwok & Whitelaw,24 respectively. There was a strong correlation between the actual and estimated weight and height measures. The reproducibility of the equation proposed by Chumlea et al.8 to calculate height was better. The nutritional status, the patients classifi ed as malnutrition was greater when using the Patient-Generated Subjective Global Assessment and the relationship with usual weight.

Estimativa da altura por dimensões dentárias: uma revisão da literatura

The knowledge of Forensic Anthropology is very importance in cases of identification of human remains. One phase of this process is the study of human height, which can be accomplished with relative ease when intact corpses, complete skeletons or long bones are available. However, the experience of Forensic Dentistry is essential in situations in which there is only information of the skull or of the teeth. The objective of this study was to review in the literature and evaluate works concerning the estimate of the height calculated from dental dimensions. Carrea, in 1920, proposed the estimation of the probable height of an individual by developing formulas for maximum and minimum heights from measurements of the lower central and lateral incisors and canines. The method was used in the case "Josef Mengele", to complement estimates. Tested in the Brazilian population, 70% of match between the actual and the estimated stature were obtained. Using more precise instruments, in the modified method, 96% of correct matching were verified. Recently, a new formula was introduced to estimate height, from measurements of upper teeth, because the technique cannot be used when jaw is not available. The correlation between height and dental dimensions is demonstrated. However, there is still a lack in scientific literature in this field, and further studies are necessary. The estimate of height from dental dimensions can be very useful and important, especially in situations where the complete skeleton it not found, and long bones are not available.

Irrigação de baixo custo em sistemas de pastejo rotacionado

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA