Fusão de imagens PET-TC na avaliação do carcinoma espinocelular de cabeça e pescoço

OBJETIVO: Os autores estabeleceram uma metodologia para avaliar carcinoma espinocelular de cabeça e pescoço, identificando e distinguindo áreas de grande atividade metabólica dentro da neoplasia, associando dados simultaneamente adquiridos, obtidos por diferentes modalidades de aquisição de imagens, combinando informações metabólicas e anatômicas num único exame. MATERIAIS E MÉTODOS: A população estudada consistiu de 17 pacientes com carcinoma espinocelular pertencentes aos arquivos do Departamento de Imagem do Hospital do Câncer, São Paulo. As imagens de tomografia computadorizada (TC) e da tomografia por emissão de pósitrons (PET) com 2-[F-18]-fluoro-2-deoxi-d-glucose (18F-FDG-PET) foram simultaneamente adquiridas utilizando aparelho não dedicado. Os dados originais foram transferidos para uma estação de trabalho independente com o programa Entegra 2NT para gerar a fusão de imagens da PET e TC. RESULTADOS: Os achados foram definidos como positivos na presença de focos com aumento da concentração do radiofármaco em áreas não relacionadas à sua distribuição normal. CONCLUSÃO: A fusão de imagens simultaneamente adquiridas num único exame (18F-FDG-PET e TC) possibilitou o mapeamento topográfico metabólico das lesões estudadas e foi possível localizar áreas de maior atividade metabólica dentro do próprio tumor, verificando recidivas ou metástases, possibilitando aumentar as opções quanto ao planejamento radioterápico ou cirúrgico.

Fusão renal completa em criança com infecção recorrente do trato urinário

O rim em bolo é uma rara anormalidade do trato urinário que pode ser diagnosticada em qualquer faixa etária. Durante investigação de infecção urinária recorrente em criança de 12 anos, foi revelada em tomografia computadorizada contrastada a presença de rim direito ectópico, com fusão renal, drenado por dois ureteres. Foi iniciado tratamento profilático com nitrofurantoína e o paciente se encontra assintomático.

Sulfitos duplos contendo cobre (I) e um metal de transição M(II) tipo Cu2SO3.M(II)SO3.2H 2O [M(II) = Cu(II), Fe(II), Mn(II) e Cd(II)]: preparação e seletividade na incorporação de M(II)

The metal-catalyzed autooxidation of S(IV) has been studied for more than a century without a consensus being obtained as to reaction rates, rate laws or mechanisms. The main objective in this work was to explore the reaction between Cu(II) and SO2 in the presence of M(II), paying special attention to the formation of double sulfites like Cu2SO3.M(II)SO3.2H 2O. The two principal aspects studied were: i) a new way to prepare double sulfites with high purity degree and the selectivity in the M(II) incorporation during the salt formation.

Entalpia reticular, entalpia de fusão e temperatura de fusão de adutos: algumas correlações empíricas utilizando DSC

By using DSC data is shown that there are empirical correlations between lattice enthalpy, melting enthalpy and the temperature of melting for adducts, and that is possible, using only a single DSC curve, estimate the value of DM Hmq.

Peptídeos de conformação restrita induzida pela incorporação de unidades (aza)lactâmicas

Conformational constraint is an approach which can be used to restrict the flexibility of peptide molecules and to provide information on the topographical requirements of receptors. The incorporation of conformationally constrained units in a peptide can lead to peptide analogues that present numerous advantages such as the potentialization of the pharmacological activity and the decrease of enzymatic degradation. This review discusses the peptide analogues containing a lactam or azalactam unit in their sequences. Of particular interest has been the replacement of a dipeptide motif in a peptide that simulates a beta-turn.

Incorporação de CuSO4 residual em argamassa, como método de disposição final

Residual CuSO4 was incorporated into the mass utilized for cement preparation. To a cement mass with 1:0.5:5 of cement, lime and sand to 0.25, 0.50, 0.75 and 1.00% of residual CuSO4 were added. The sulfate was mixed separately with lime and water to induce metal precipitation. The hardened test bodies were submerged in Milli-Q water for three months. No Cu was detected in the water by Atomic Absorption Spectrometry. The best proportion for mechanical resistance and porosity is 0.50%. The cement is adequate for non-structural objects.

Recuperação de metais de catalisadores de hidrorrefino usados via fusão com KHSO4

This work describes a process for metal recovery from spent NiMo and CoMo/Al2O3 commercial hydrorefining catalysts. The samples were treated by fusion with potassium hydrogen sulfate (5 h, 600 ºC) with a KHSO4/catalyst mass ratio of 10:1. After fusion the solid was solubilized in water (100 ºC), leaving silicon compounds as residue. Losses of nickel and cobalt may reach 16 wt% of the amount present in the sample, depending on the silicon content. Soluble metals were isolated by selective precipitation techniques (nickel, cobalt, aluminum) or by solvent extraction with methyl-isobutyl ketone (molybdenum) in a hydrochloric acid medium. All metals were recovered in very good yields except for nickel and cobalt in the presence of considerable amounts of silicon. Soluble wastes consist of potassium/sodium sulfates/chlorides. Solid wastes correspond to about 4 wt% of the catalyst and can be discarded in industrial dumps.

Parâmetros operacionais no processamento de zeólitas desativadas por fusão com KHSO4

This work presents a study on the determination of the optimal experimental conditions for processing spent commercial zeolites in order to recover lanthanide elements and eventually other elements. The process is based on the fusion of the sample with potassium hydrogenosulfate (KHSO4). Three experimental parameters were studied: temperature, reaction time and catalyst/flux mass ratio. After fusion the solid was dissolved in water and the amount of insoluble matter was used to determine the efficiency of the process. The optimized experimental parameters depend on the composition of the sample processed. Under such conditions the insoluble residue corresponds to SiO2. Lanthanide elements and aluminum present in solution were isolated by conventional precipitation techniques; the yields were at least 75 wt%. The final generated wastes correspond to neutral colorless solutions containing alkali chlorides/sulfates and solids that can be disposed of in industrial dumps.

Lipídios estruturados obtidos a partir da mistura de gordura de frango, sua estearina e triacilgliceróis de cadeia média: II- pontos de amolecimento e fusão

The aim of the present work is to investigate the effects of blending and chemical interesterification reactions on the softening and melting behavior of chicken fat, its stearin and medium chain triacylglycerols, and blends thereof in various ratios. Chemical interesterification is a promising alternative to the current processes of modifying the physical properties of fats. In the experimental design 7 samples corresponding to 7 different blend proportions were used. The results were represented in triangular diagrams. The addition of stearin influenced the softening and melting points. The mixture response surface methodology proved to be an extremely useful tool for the optimization of the fat mixtures.

De mari fuso, in templo Hierosolymitano

Invocatio: Q.D.B.V.

Caracterização da fusão peritética do cloreto de sódio di-hidratado por curvas de aquecimento

Binary mixture phase diagrams are normally obtained from thermal analysis involving freezing point curves. However, that approach is not always reliable and easy to follow to all kinds of mixtures in any proportion. In fact, even for a simple system, such as NaCl-H2O, this freezing methodology gives mixed results when one starts from a solid-solution system, due mostly to the formation of the NaCl.2H2O, which has an incongruent melting point, and the dependence of its solubility with the temperature. In this work we report a trustworthy, simple and cheap method involving heating curves to drawn the NaCl-H2O phase diagram.

O Instituto de Química da Universidade Federal do Rio de Janeiro, da pós-graduação à incorporação dos cursos de graduação: uma perspectiva histórica

This work intends to present the history of top-level Chemistry education in Rio de Janeiro. It's important to rescue the history of Chemistry Institute of Federal University of Rio de Janeiro since 1959. It's also important to understand the incorporation of two undergraduate courses: Chemistry and Chemistry bachelor's degree. It covers historical background of Chemistry education in old National Faculty of Philosophy, considering power disputes between Industrial Chemistry Course and Chemical Engineering; when and in which circumstances the Institute was created; political context and its relation with postgraduate. Finally, discuss the incorporation of undergraduate courses and curriculum modifications since 1968.

Efeitos da incorporação de peneiras moleculares 3A, 4A, 5A e 13X em membranas compósitas de quitosana/poli(vinil álcool)

The composite membranes prepared via incorporation of 12.5% of molecular sieves 3A, 4A, 5A and 13X into chitosan/poly(vinyl alcohol) (1:1). The composite membranes were immersed in the cross-linker sulfuric acid in order to acquire high proton conductivity for applications in electrolytes in PEMCF and DMF. The influence of the molecular sieves on the structural, optical, thermal, mechanical, morphologic and protonic conductivity properties and water/methanol swelling degree of membranes were investigated.

Incorporação de dióxido de titânio em zeólitas para emprego em fotocatálise heterogênea

This work proposes the study of heterogeneous photocatalysis using TiO2 impregnated in zeolites beta, ZSM-5, mordenite, NaXb, NaXp and NaY for the decomposition of methylene blue. The catalysts were characterized by XRD, IR, textural analyses by N2 adsorption, SEM, DRS and the reaction of decomposition was monitored by UV visible. The results indicated that didn't have structural changes in the catalysts after Ti impregnations, only in the case of NaY and NaX zeolites. The better photocatalyst to metylene blue decomposition was beta/Ti zeolite due had one structure more accessible (with bigger porous) helping in TiO2 dispersion and catalytic active.